This commit adds namespaces support for the Hashicorp Key Management plugin.

When getaddrinfo returns and error, the contents
of ai are invalid so we cannot continue based
on their data structures.

In the previous branch of the if statement, we
abort there if there is an error so for consistency
we abort here too.

The test case fixes the port number to UINTMAX32
for both an enumberated bind-address and the
default bind-address covering the two calls to
getaddrinfo.

Review thanks Sanja.

During a Sysbench oltp_point_select workload with 1 table and 400
concurrent connections, a bottleneck on dict_table_t::lock_mutex was
observed in ha_innobase::info_low().

dict_table_t::lock_latch: Replaces lock_mutex.

In ha_innobase::info_low() and several other places, we will acquire
a shared dict_table_t::lock_latch or we may elide the latch if
hardware memory transactions are available.

innobase_build_v_templ(): Remove the parameter "bool locked", and
require the caller to hold exclusive dict_table_t::lock_latch
(instead of holding an exclusive dict_sys.latch).

Tested by: Vladislav Vaintroub
Reviewed by: Vladislav Vaintroub

As part of commit 685d958e (MDEV-14425)
the parameter innodb_log_write_ahead_size was removed, because it was
thought that determining the physical block size would be a sufficient
replacement.

However, we can only determine the physical block size on Linux or
Microsoft Windows. On some file systems, the physical block size
is not relevant. For example, XFS uses a block size of 4096 bytes
even if the underlying block size may be smaller.

On Linux, we failed to determine the physical block size if
innodb_log_file_buffered=OFF was not requested or possible.
This will be fixed.

log_sys.write_size: The value of the reintroduced parameter
innodb_log_write_ahead_size. To keep it simple, this is read-only
and a power of two between 512 and 4096 bytes, so that the previous
alignment guarantees are fulfilled. This will replace the previous
log_sys.get_block_size().

log_sys.block_size, log_t::get_block_size(): Remove.

log_t::set_block_size(): Ensure that write_size will not be less
than the physical block size. There is no point to invoke this
function with 512 or less, because that is the minimum value of
write_size.

innodb_params_adjust(): Add some disabled code for adjusting
the minimum value and default value of innodb_log_write_ahead_size
to reflect the log_sys.write_size.

log_t::set_recovered(): Mark the recovery completed. This is the
place to adjust some things if we want to allow write_size>4096.

log_t::resize_write_buf(): Refer to write_size.

log_t::resize_start(): Refer to write_size instead of get_block_size().

log_write_buf(): Simplify some arithmetics and remove a goto.

log_t::write_buf(): Refer to write_size. If we are writing less than
that, do not switch buffers, but keep writing to the same buffer.
Move some code to improve the locality of reference.

recv_scan_log(): Refer to write_size instead of get_block_size().

os_file_create_func(): For type==OS_LOG_FILE on Linux, always invoke
os_file_log_maybe_unbuffered(), so that log_sys.set_block_size() will
be invoked even if we are not attempting to use O_DIRECT.

recv_sys_t::find_checkpoint(): Read the entire log header
in a single 12 KiB request into log_sys.buf.

Tested with:
./mtr --loose-innodb-log-write-ahead-size=4096
./mtr --loose-innodb-log-write-ahead-size=2048

The log_event_old.cc is included by mysqlbinlog.cc.

With -DWITHOUT_SERVER the include path for the wsrep
include headers isn't there.

As these aren't needed by the mariadb-binlog, move
these to under a ifndef MYSQL_CLIENT preprocessor.

Caused by MDEV-18590

Just like the spider/bugfix suite.

One caveat is that my_2_3.cnf needs something under mysqld.2.3 group,
otherwise mtr will fail with something like:

There is no group named 'mysqld.2.3' that can be used to resolve
'port' for ...

This will allow new tests under the spider suite to use what is
needed. It also somehow fixes issues of running a test followed by
spider.slave_trx_isolation.

One of possible use cases that reproduces the memory leakage listed below:

  set timestamp= unix_timestamp('2000-01-01 00:00:00');
  create or replace table t1 (x int) with system versioning
    partition by system_time interval 1 hour auto
    partitions 3;

  create table t2 (x int);

  create trigger tr after insert on t2 for each row update t1 set x= 11;
  create or replace procedure sp2() insert into t2 values (5);

  set timestamp= unix_timestamp('2000-01-01 04:00:00');
  call sp2;

  set timestamp= unix_timestamp('2000-01-01 13:00:00');
  call sp2; # <<=== Memory leak happens there. In case MariaDB server is built
                    with the option -DWITH_PROTECT_STATEMENT_MEMROOT,
                    the second execution would hit assert failure.

The reason of leaking a memory is that once a new partition be created
the table should be closed and re-opened. It results in calling the function
extend_table_list() that indirectly invokes the function sp_add_used_routine()
to add routines implicitly used by the statement that makes a new memory
allocation.

To fix it, don't remove routines and tables the statement implicitly depends
on when a table being closed for subsequent re-opening.

Executing an INSERT statement in PS mode having positional parameter
bound with an array could result in incorrect number of inserted rows
in case there is a BEFORE INSERT trigger that executes yet another
INSERT statement to put a copy of row being inserted into some table.

The reason for incorrect number of inserted rows is that a data structure
used for binding positional argument with its actual values is stored
in THD (this is thd->bulk_param) and reused on processing every INSERT
statement. It leads to consuming actual values bound with top-level
INSERT statement by other INSERT statements used by triggers' body.

To fix the issue, reset the thd->bulk_param temporary to the value nullptr
before invoking triggers and restore its value on finishing its execution.

Having Item_func_not items in item trees breaks assumptions during the
optimization phase about transformation possibilities in fix_fields().
Remove Item_func_not by extending normalization during parsing.

Reviewed by Oleksandr Byelkin (sanja@mariadb.com)

New error codes can only be added in the latest major version.
Adding ER_KILL_DENIED_HIGH_PRIORITY would shift by one all
error codes that were added in MariaDB Server 10.6 or later.

This amends commit 1001dae1

Suggested by: Sergei Golubchik

ha_innobase::info_low(): For HA_STATUS_VARIABLE without
HA_STATUS_VARIABLE_EXTRA, let us avoid unnecessary and costly updates
of the data_free statistics, which are only needed for SHOW TABLE STATUS.
This optimization had been enabled in
commit 247ecb75 but not utilized until now.

Now that we have proper paths in `galera_recovery` changing the
directory is no longer required.

The variable `sbindir` is never set for cmake. This adds borked paths to
`galera_recovery`, though it dit not break as the systemd unit changes
the dir to make the relative path work anyway.

Let's fix this nevertheless...

RAND() and UUID() are treated differently with respect to subquery
materialization both should be marked as uncacheable, forcing materialization.
Altered Create_func_uuid(_short)::create_builder().
Added comment in header about UNCACHEABLE_RAND meaning also unmergeable.

- Few of test case should make sure that InnoDB does hit
the debug sync point during startup of the server.
InnoDB can remove the double quotes of debug point
in restart parameters.

log_slow_innodb.test sets "log_slow_verbosity_innodb_expected_matches"

in include/log_slow_grep.inc:
- Fix a typo: take value from log_slow_*VERBOSITY*_innodb_expected_matches
- Add a missing "--source include/log_grep.inc"
- two-line search patterns do not work, search for each line individually.

Find and fix missing virtual override markings.  Updates cmake
maintainer flags to include -Wsuggest-override and
-Winconsistent-missing-override.

The fixes in b8a67198 have not disabled
semi-consistent read for innodb_snapshot_isolation=ON mode, they just allowed
read uncommitted version of a record, that's why the test for MDEV-26643 worked
well.

The semi-consistent read should be disabled on upper level in
row_search_mvcc() for READ COMMITTED isolation level.

Reviewed by Marko Mäkelä.

- InnoDB tries to write FILE_CHECKPOINT marker during
early recovery when log file size is insufficient.
While updating the log checkpoint at the end of the recovery,
InnoDB must already have written out all pending changes
to the persistent files. To complete the checkpoint, InnoDB
has to write some log records for the checkpoint and to
update the checkpoint header. If the server gets killed
before updating the checkpoint header then it would lead
the logfile to be unrecoverable.

- This patch avoids FILE_CHECKPOINT marker during early
recovery and narrows down the window of opportunity to
make the log file unrecoverable.

There were erroneous calls for charpos() in key_hashnr() and key_buf_cmp().
These functions are never called with prefix segments.

The charpos() calls were wrong. Before the change BNHL joins
- could return wrong result sets, as reported in MDEV-34417
- were extremely slow for multi-byte character sets, because
  the hash was calculated on string prefixes, which increased
  the amount of collisions drastically.

This patch fixes the wrong result set as reported in MDEV-34417,
as well as (partially) the performance problem reported in MDEV-34352.

A user reported that MariaDB server got a signal 6 but still accepted new
connections and did not crash.  I have not been able to find a way to
repeat this or find the cause of issue. However to make it easier to
notice that the server is unstable, I added code to disable new
connections when the handle_fatal_signal() handler has been called.

Changed the logged messages from errors to warnings
Also changed 'remain' to 'read_length' in the warning to make it more readable.

The problem is seen on CI, where TEMP pointed to directory outside of
the usual vardir, when testing mysql_install_db.exe
A likely cause for this error is that TEMP was periodically cleaned up
by some automation running on the host, perhaps by buildbot itself.

To fix, mysql_install_db.exe will now use datadir as --tmpdir
for the bootstrap run. This will minimize chances to run into any
environment problems.

This commit introduces a reset of password errors counter on any alter user
command for the altered user. This is done so as to not require a
complete privilege system reload.

Fix coding style and extract common password reset counter code into
separate ACL_USER method.

- The deadlock counter was moved from
Deadlock::find_cycle into Deadlock::report, because
the find_cycle method is called multiple times during deadlock
detection flow, which means it shouldn't have such side effects.
But report() can, which called only once for
a victim transaction.
- Also the deadlock_detect.test and *.result test case
has been extended to handle the fix.

Problem was that there was two non-conflicting local idle
transactions in node_1 that both inserted a key to primary key.
Then two transactions from other nodes inserted also
a key to primary key so that insert from node_2 conflicted
one of the local transactions in node_1 so that there would
be duplicate key if both are committed. For this insert
from other node tries to acquire S-lock for this record
and because this insert is high priority brute force (BF)
transaction it will kill idle local transaction.

Concurrently, second insert from node_3 conflicts the second
idle insert transaction in node_1. Again, it tries to acquire
S-lock for this record and kills idle local transaction.

At this point we have two non-conflicting high priority
transactions holding S-lock on different records in node_1.
For example like this: rec s-lock-node2-rec s-lock-node3-rec rec.

Because these high priority BF-transactions do not wait
each other insert from node3 that has later seqno compared
to insert from node2 can continue. It will try to acquire
insert intention for record it tries to insert (to avoid
duplicate key to be inserted by local transaction). Hower,
it will note that there is conflicting S-lock in same gap
between records. This will lead deadlock error as we have
defined that BF-transactions may not wait for record lock
but we can't kill conflicting BF-transaction because
it has lower seqno and it should commit first.

BF-transactions are executed concurrently because their
values to primary key are different i.e. they do not
conflict.

Galera certification will make sure that inserts from
other nodes i.e these high priority BF-transactions
can't insert duplicate keys. Local transactions naturally
can but they will be killed when BF-transaction
acquires required record locks.

Therefore, we can allow situation where there is conflicting
S-lock and insert intention lock regardless of their seqno
order and let both continue with no wait. This will lead
to situation where we need to allow BF-transaction
to wait when lock_rec_has_to_wait_in_queue is called
because this function is also called from
lock_rec_queue_validate and because lock is waiting
there would be assertion in ut_a(lock->is_gap()
|| lock_rec_has_to_wait_in_queue(cell, lock));

lock_wait_wsrep_kill
  Add debug sync points for BF-transactions killing
  local transaction.

wsrep_assert_no_bf_bf_wait
  Print also requested lock information

lock_rec_has_to_wait
  Add function to handle wsrep transaction lock wait
  cases.

lock_rec_has_to_wait_wsrep
  New function to handle wsrep transaction lock wait
  exceptions.

lock_rec_has_to_wait_in_queue
  Remove wsrep exception, in this function all
  conflicting locks need to wait in queue.
  Conflicts between BF and local transactions
  are handled in lock_wait.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

Changed error code for Galera unkillable threads to
be ER_KILL_DENIED_HIGH_PRIORITY giving message

This is a high priority thread/query and cannot be killed
without the compromising consistency of the cluster

also a warning is produced
  Thread %lld is [wsrep applier|high priority] and cannot be killed
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

MDEV-29934 rpl.rpl_start_alter_chain_basic, rpl.rpl_start_alter_restart_slave sometimes fail in BB with result content mismatch

rpl.rpl_start_alter_chain_basic was used to fail sporadically due
to a missed GTID master-slave synchronization which was necessary
because of the following SELECT from GTID-state table.

Fixed with arranging two synchronization pieces for two
chain slaves requiring that.

Note rpl.rpl_start_alter_restart_slave must have been fixed by
MDEV-30460 and 87e13722 (manual) merge commit.

In an I/O bound concurrent INSERT test conducted by Mark Callaghan,
spin loops on dict_index_t::lock turn out to be beneficial.

This is a mixed bag; enabling the spin loops will improve throughput
and latency on some workloads and degrade in others.

Reviewed by: Debarun Banerjee
Tested by: Matthias Leich
Performance tested by: Axel Schwenke