When disk is full, server may waiting for free space while
writing binlog, relay-log or MyISAM tables. The server will 
continue after user have freed some space. But the error
message printed was not quite clear about the how often the
error message is printed, and there will be a delay before
the server continue and user freeing space. And caused users
thinking that the server was hanging forever.

This patch fixed the problem by making the error messages
printed more clear. The error message is split into two part,
the first part will only be printed once, and the second part
will be printed very 10 times.

Message first part:
Disk is full writing '<filename>' (Errcode: <errorno>). Waiting
for someone to free space... (Expect up to 60 secs delay for 
server to continue after freeing disk space)

Message second part:
Retry in 60 secs, Message reprinted in 600 secs

Backporting patch to 5.0.

Bug #41571: MySQL segfaults after innodb recovery

This 5.0 fix will not be pushed into 5.1; a separate fix (from
innodb-5.1-ss4007) will be pushed into 5.1+.

Detailed revision comments:

r4003 | marko | 2009-01-20 16:12:50 +0200 (Tue, 20 Jan 2009) | 10 lines
branches/5.0: rec_set_nth_field(): When the field already is SQL null,
do nothing when it is being changed to SQL null. (Bug #41571)

Normally, MySQL does not pass "do-nothing" updates to the storage engine.
When it does and a column of an InnoDB table that is in ROW_FORMAT=COMPACT
is being updated from NULL to NULL, the InnoDB buffer pool will be corrupted
without this fix.

rb://81 approved by Heikki Tuuri

Bug #18828: If InnoDB runs out of undo slots, it returns misleading 'table is full'

This is a backport of code already in 5.1+.  The error message change referred
to in the detailed revision comments is still pending.

Detailed revision comments:

r3937 | calvin | 2009-01-15 03:11:56 +0200 (Thu, 15 Jan 2009) | 17 lines
branches/5.0:

Backport the fix for Bug#18828. Return DB_TOO_MANY_CONCURRENT_TRXS
when we run out of UNDO slots in the rollback segment. The backport
is requested by MySQL under bug#41529 - Safe handling of InnoDB running
out of undo log slots.

This is a partial fix since the MySQL error code requested to properly
report the error condition back to the client has not yet materialized.
Currently we have #ifdef'd the error code translation in ha_innodb.cc.
This will have to be changed as and when MySQl add the new requested
code or an equivalent code that we can then use.

Given the above, currently we will get the old behavior, not the
"fixed" and intended behavior.

Approved by:	Heikki (on IM)

Bug #39939: DROP TABLE/DISCARD TABLESPACE takes long time in buf_LRU_invalidate_tablespace()

This was already fixed in 5.1+; this is a backport to 5.0.

Detailed revision comments:

r2743 | inaam | 2008-10-08 22:18:12 +0300 (Wed, 08 Oct 2008) | 13 lines
branches/5.0:

Backport of r2742 from branches/5.1:

Fix Bug#39939 DROP TABLE/DISCARD TABLESPACE takes long time in
buf_LRU_invalidate_tablespace()

Improve implementation of buf_LRU_invalidate_tablespace by attempting
hash index drop in batches instead of doing it one by one.

Reviewed by: Heikki, Sunny, Marko
Approved by: Heikki

return no rows

The algorithm of determining the best key for loose index scan is doing a loop
over the available indexes and selects the one that has the best cost.
It retrieves the parameters of the current index into a set of variables.
If the cost of using the current index is lower than the best cost so far it 
copies these variables into another set of variables that contain the 
information for the best index so far.
After having checked all the indexes it uses these variables (outside of the 
index loop) to create the table read plan object instance.
The was a single omission : the key_infix/key_infix_len variables were used 
outside of the loop without being preserved in the loop for the best index 
so far.
This causes these variables to get overwritten by the next index(es) checked.
Fixed by adding variables to hold the data for the current index, passing 
the new variables to the function that assigns values to them and copying 
the new variables into the existing ones when selecting a new current best 
index.
To avoid further such problems moved the declarations of the variables used 
to keep information about the current index inside the loop's compound 
statement.

of a view are selected by * wildcard

Backported a part of the fix for 36086 to 5.0

Fixed a typo in the bug fix patch.

Started fix in 5.0 as the same issue is here.
Revising queries used given what appears to be the scope of this test to only select the manipulated variables.
Added tests for values that are / are not multiples of 1024 to test rounding / constraints.
This behavior is not currently documented (docs bug has been opened)

*with --with-charset=utf8*

Problem: wrong LONG TEXT field length is sent to a client 
when multibyte server character set used.

Fix: always limit field length sent to a client to 2^32,
as we store it in 4 byte slot.

Note: mysql_client_test changed accordingly.

usermode address space limit.

Fix: use /LARGEADDRESSAWARE link option when linking 32 bit
executables

print compact view name if the view belongs to the current database

Changed context of Create routine to Databases.

for bug #15936.

On some platforms fenv.h may #undef the min/max macros
defined in my_global.h.

Fixed by moving the #include directive for fenv.h from
mysqld.cc to my_global.h before definitions for min/max.

      
There was a problem when a DELIMITER COMMAND is not the first 
command on the line. I this case an extra line feed was added
to the glob buffer and this was causing subsequent attempts 
to enter this delimiter to fail.
Fixed by not adding a new line to the glob buffer if the 
command being added is a DELIMITER

Add all HA error numbers and descriptions to perror.

Add reminder to header.

This is already fixed in smarter ways in future codebases, and this 
codebase is unlikely to change, since new development is forbidden
here.

Bug#41112: crash in mysql_ha_close_table/get_lock_data with alter table

The problem is that the server wasn't handling robustly failures
to re-open a table during a HANDLER .. READ statement. If the
table needed to be re-opened due to it's storage engine being
altered to one that doesn't support HANDLER, a reference (dangling
pointer) to a closed table could be left in place and accessed in
later attempts to fetch from the table using the handler. Also,
if the server failed to set a error message if the re-open
failed. These problems could lead to server crashes or hangs.

The solution is to remove any references to a closed table and
to set a error if reopening a table during a HANDLER .. READ
statement fails.

There is no test case in this change set as the test depends on
a testing feature only available on 5.1 and later.

Both of our own implementations of rint(3) were inconsistent with the
most common behavior of rint() on those platforms that have it: round
to nearest, break ties by rounding to nearest even.

Fixed by leaving just one implementation of rint() in our source tree,
and changing its behavior to match the most common native
implementations on other platforms.