into mysql.com:/Users/kent/mysql/bk/mysql-4.1-new

into  perch.ndb.mysql.com:/home/jonas/src/mysql-4.1

into  mysql.com:/home/alexi/innodb/mysql-4.1-innodb

into  mysql.com:/home/alexi/innodb/mysql-4.1-innodb

mysql-test/r/innodb_mysql.result:
  Fix result.

 Use files innodb_mysql.[test|result] instead.


mysql-test/t/innodb.test:
  This file is to be used by Innobase only.
mysql-test/r/innodb_mysql.result:
  New BitKeeper file ``mysql-test/r/innodb_mysql.result''
   Use this file instead of innodb.result.
mysql-test/t/innodb_mysql.test:
  New BitKeeper file ``mysql-test/t/innodb_mysql.test''
   Use this file instead of innodb.test.

(reported by Stefano Di Paola)

  Handle early abort of scan, so that resources are correctly freed


ndb/src/kernel/blocks/dbtc/Dbtc.hpp:
  Handle early abort
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Handle early abort so that require on running.empty() does not fire

mysql-test/mysql-test-run.pl:
  Fix typo.

into  mysql.com:/data0/knielsen/mysql-4.1-mtr-fix

into  production.mysql.com:/usersnfs/rkalimullin/4.1.b17896

into  polar.kitebird.com:/src/extern/MySQL/bk/mysql-4.1

  myisam_ftdump options: --help first, then rest in
  lexical order.


myisam/myisam_ftdump.c:
  myisam_ftdump options: --help first, then rest in
  lexical order.

accounting non-ai32 in tmpkeyval. This changeset is supposed to be specifically for 4.1.
Another changeset is going to push into 5. 


sql/sql_base.cc:
  correction due to uint4korr definition: can not sizeof on not ia32.

  Backporting a changeset made for 5.0. Comments from there:

  The fix refines the algorithm of generating DROPs for binlog.
  Temp tables with common pseudo_thread_id are clustered into one query.
  Consequently one replication event per pseudo_thread_id is generated.




mysql-test/r/rpl_temporary.result:
  results changed
mysql-test/t/rpl_temporary.test:
  test to generate problematic drop in binlog to feed it to restarting slave
  to see no stop.
sql/sql_base.cc:
  change in drop temprorary tables alg in close_temporary_tables.

into  mysql.com:/home/alexi/innodb/mysql-4.1

into  rurik.mysql.com:/home/igor/mysql-4.1

into  production.mysql.com:/usersnfs/rkalimullin/4.1.b18643

- after review fixes


sql/item_cmpfunc.cc:
  Bug #17896: MIN of CASE WHEN returns non-minimum value!
  - after review fixes.

into  rurik.mysql.com:/home/igor/dev/mysql-4.1-0

The bug caused wrong result sets for union constructs of the form
(SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2.
For such queries order lists were concatenated and limit clause was
completely neglected. 


mysql-test/r/order_by.result:
  Added a test case for bug #18767.
mysql-test/t/order_by.test:
  Added a test case for bug #18767.
sql/sql_lex.h:
  Fixed bug #18767.
  Placed the code the created a fake SELECT_LEX into a separate function.
sql/sql_parse.cc:
  Fixed bug #18767.
  Placed the code the created a fake SELECT_LEX into a separate function.
sql/sql_select.cc:
  Fixed bug #18767.
  Changed the condition on which a SELECT is treated as part of a UNION.
  The SELECT in 
  (SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2 
  now is handled in the same way as the first SELECT in a UNION
  sequence.
sql/sql_union.cc:
  Fixed bug #18767.
  Changed the condition at which a SELECT is treated as part of a UNION.
  The SELECT in 
  (SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2 
  now is handled in the same way as the first SELECT in a UNION
  sequence.
sql/sql_yacc.yy:
  Fixed bug #18767.
  Changed the condition at which a SELECT is treated as part of a UNION.
  The SELECT in 
  (SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2 
  now is handled in the same way as the first SELECT in a UNION
  sequence. In the same way is handled the SELECT in
  (SELECT ... LIMIT n) ORDER BY order list.
  Yet if there is neither ORDER BY nor LIMIT in the single-select
  union construct
  (SELECT ...) ORDER BY order_list
  then it is still handled as simple select with an order clause.

 Fix BUG#16814: "SHOW INNODB STATUS format error in LATEST FOREIGN KEY ERROR section"
     Add a missing newline to the LAST FOREIGN KEY ERROR section in SHOW INNODB STATUS
     output.
 Fix BUG#18934: "InnoDB crashes when table uses column names like DB_ROW_ID".
     Refuse tables that use reserved column names.


innobase/dict/dict0dict.c:
  Applied innodb-4.1-ss22 snapshot.
   dict_foreign_error_report(): Always print a newline after invoking
    dict_print_info_on_foreign_key_in_create_format() (Bug#16814).
   Refuse tables that use reserved column names (Bug#18934).
innobase/dict/dict0mem.c:
  Applied innodb-4.1-ss22 snapshot.
   Refuse tables that use reserved column names (Bug#18934).
innobase/include/dict0dict.h:
  Applied innodb-4.1-ss22 snapshot.
   Refuse tables that use reserved column names (Bug#18934).
innobase/include/dict0mem.h:
  Applied innodb-4.1-ss22 snapshot.
   Refuse tables that use reserved column names (Bug#18934).
innobase/include/univ.i:
  Applied innodb-4.1-ss22 snapshot.
innobase/row/row0mysql.c:
  Applied innodb-4.1-ss22 snapshot.
   Refuse tables that use reserved column names (Bug#18934).

into  production.mysql.com:/usersnfs/mleich/src

  Clean up test case for bug#14169


mysql-test/t/func_gconcat.test:
  Clean up test case for bug#14169

Temporarily commented out a query from the test case for bug 14169 to make it pass with --ps-protocol.


mysql-test/r/func_gconcat.result:
  Added DROP TABLE command to the test case for bug 14169.

into  rurik.mysql.com:/home/igor/dev/mysql-4.1-2

into moonbone.local:/work/14169-bug-4.1-mysql

  Corrected test case for the bug#14169 to make it pass in --ps-protocol mode.


mysql-test/r/func_gconcat.result:
  Corrected test case for the bug#14169 to make it pass in --ps-protocol mode.

After a locking error the open table(s) were not fully
cleaned up for reuse. But they were put into the open table
cache even before the lock was tried. The next statement
reused the table(s) with a wrong lock type set up. This
tricked MyISAM into believing that it don't need to update
the table statistics. Hence CHECK TABLE reported a mismatch
of record count and table size.

Fortunately nothing worse has been detected yet. The effect
of the test case was that the insert worked on a read locked
table. (!)

I added a new function that clears the lock type from all
tables that were prepared for a lock. I call this function
when a lock failes.

No test case. One test would add 50 seconds to the
test suite. Another test requires file mode modifications.
I added a test script to the bug report. It contains three
cases for failing locks. All could reproduce a table
corruption. All are fixed by this patch.

This bug was not lock timeout specific.


sql/lock.cc:
  Bug#18544 - LOCK TABLES timeout causes MyISAM table corruption
  Resetting the lock type in the open table(s) lock data
  after a locking error.

into mysql.com:/Users/kent/mysql/bk/mysql-4.1-new


configure.in:
  Auto merged

The bug caused a reported index corruption in the cases when
key_cache_block_size was not a multiple of myisam_block_size,
e.g. when key_cache_block_size=1536 while myisam_block_size=1024.


mysql-test/r/key_cache.result:
  Added a test case for bug #19079.
mysql-test/t/key_cache.test:
  Added a test case for bug #19079.

  fix api_signal_log print of uncond signals


ndb/src/ndbapi/Ndbif.cpp:
  Send TC_COMMIT_ACK uncond
ndb/src/ndbapi/TransporterFacade.cpp:
  Fix printout of uncond signals
ndb/src/ndbapi/TransporterFacade.hpp:
  Fix printout of uncond signals

into  mysql.com:/home/matthias/Arbeit/mysql-4.1/src-1

into  mysql.com:/home/stewart/Documents/MySQL/4.1/merge


ndb/src/kernel/blocks/ndbcntr/NdbcntrInit.cpp:
  Auto merged

into  mysql.com:/home/stewart/Documents/MySQL/4.1/merge

into moonbone.local:/work/14169-bug-4.1-mysql

into  mysql.com:/usr/home/bar/mysql-4.1.b18691

MySQL 4.1
  and Bug#16920 rpl_deadlock_innodb fails in show slave status (reported for MySQL 5.1)
  - backport of several fixes done in MySQL 5.0 to 4.1
  - fix for new discovered instability (see comment on Bug#12429 + Bug#16920)
  - reenabling of testcases


mysql-test/r/rpl_deadlock.result:
  Updated results
mysql-test/r/rpl_relayrotate.result:
  Updated results
mysql-test/t/disabled.def:
  Reenabling of tests
mysql-test/t/rpl_deadlock.test:
  - replace sleep with real_sleep (backport fix for Bug#15624 MySQL 5.0)
  - egalized value for Slave_IO_Running 
  - line 105 (backport fix for Bug#12429 MySQL 5.0)
  - line 85 (see comment in Bug#12429 
             + Bug#16920 rpl_deadlock_innodb fails in show slave status)
  - improve readability of show slave status output (--vertical_results)
mysql-test/t/rpl_relayrotate.test:
  - Replace select ... with select max(a)
  - add sync_with_master (backport fix done by Kristian in MySQL 5.0 because of timing
    problems similar to Bug#15624)
mysql-test/t/rpl_until.test:
  Add wait_for_slave_to_stop like in the current MySQL 5.0 version of this test.
  I assume this makes the test results more predictable.