in buf_page_set_sticky

- Adding os_thread_yield() in buf_page_create() to avoid the continuous
buffer pool mutex acquistions.

			in buf_page_set_sticky

commit a1f899a8 (MDEV-23233) added the
code to make page sticky. So that InnoDB can't allow the page to
be grabbed by other thread while doing lazy drop of ahi.

But the block could be in flush list and it could have io_fix value
as BUF_IO_WRITE. It could lead to the failure in buf_page_set_sticky().

buf_page_create(): If btr_search_drop_page_hash_index() must be invoked,
take x-latch on the block. If the block io_fix value is other than
BUF_IO_NONE, release the buffer pool mutex and page hash lock and
wait for I/O to complete.

Since commit 15093639 (MDEV-23484)
the rollback of InnoDB transactions is no longer protected by
dict_operation_lock. Removing that protection revealed a race
condition between transaction rollback and the rollback of an
online table-rebuilding operation (OPTIMIZE TABLE, or any online
ALTER TABLE that is rebuilding the table).

row_undo_mod_clust(): Re-check dict_index_is_online_ddl() after
acquiring index->lock, similar to how row_undo_ins_remove_clust_rec()
is doing it. Because innobase_online_rebuild_log_free() is holding
exclusive index->lock while invoking row_log_free(), this re-check
will ensure that row_log_table_low() will not be invoked when
index->online_log=NULL.

A different race condition is possible between the rollback of a
recovered transaction and the start of online secondary index creation.
Because prepare_inplace_alter_table_dict() is not acquiring an InnoDB
table lock in this case, and because recovered transactions are not
covered by metadata locks (MDL), the dict_table_t::indexes could be
modified by prepare_inplace_alter_table_dict() while the rollback of
a recovered transaction is being executed. Normal transactions would
be covered by MDL, and during prepare_inplace_alter_table_dict() we
do hold MDL_EXCLUSIVE, that is, an online ALTER TABLE operation may
not execute concurrently with other transactions that have accessed
the table.

row_undo(): To prevent a race condition with
prepare_inplace_alter_table_dict(), acquire dict_operation_lock
for all recovered transactions. Before MDEV-23484 we used to acquire
it for all transactions, not only recovered ones.

Note: row_merge_drop_indexes() would not invoke
dict_index_remove_from_cache() while transactional locks
exist on the table, or while any thread is holding an open table handle.
OK, it does that for FULLTEXT INDEX, but ADD FULLTEXT INDEX is not
supported as an online operation, and therefore
prepare_inplace_alter_table_dict() would acquire a table S lock,
which cannot succeed as long as recovered transactions on the table
exist, because they would hold a conflicting IX lock on the table.

Ever since MDEV-15053 changed something in the page flushing,
we are occasionally observing pending I/O for a data file that
is about to be deleted.

fil_check_pending_io(): Change the Warning to a note.

This message was already made less frequent in
commit dcc0baf5 (10.5.4)
and commit 65f831d1 (10.3.24, 10.4.14).

SELECT WSREP_LAST_SEEN_GTID aborts the server if no provider is
loaded.

Some invalid wsrep_provider paths may be interpreted as a valid
directory. For example '/invalid/libgalera_smm.so' with UTF character
set is interpreted as '/', which is a valid directory. A early check
that wsrep_provider should not be a directory fixes it.

This happens with global wsrep_on disabled and local wsrep_on enabled.
The fix consists in avoiding sync wait when global wsrep_on is
disabled.

In commit fe39d02f (MDEV-20638)
we removed some wake-up signaling of the master thread that should
have been there, to ensure a steady log checkpointing workload.

Common sense suggests that the commit omitted some necessary calls
to srv_inc_activity_count(). But, an attempt to add the call to
trx_flush_log_if_needed_low() as well as to reinstate the function
innobase_active_small() did not restore the performance for the
case where sync_binlog=1 is set.

Therefore, we will revert the entire commit in MariaDB Server 10.2.
In MariaDB Server 10.5, adding a srv_inc_activity_count() call to
trx_flush_log_if_needed_low() did restore the performance, so we
will not revert MDEV-20638 across all versions.

InnoDB transaction rollback includes an unnecessary work-around for
a data corruption bug that was fixed by me in MySQL 5.6.12
mysql/mysql-server@935ba09d52c1908bde273ad1940b5ab919d9763d
and ported to MariaDB 10.0.8 by
commit c291ddfd
in 2013 and 2014, respectively.

By acquiring and releasing dict_operation_lock in shared mode,
row_undo() hopes to prevent the table from being dropped while
the undo log record is being rolled back. But, thanks to mentioned fix,
debug assertions (that we are adding) show that the rollback is
protected by transactional locks (table IX lock, in addition to
implicit or explicit exclusive locks on the records that had been modified).

Because row_drop_table_for_mysql() would invoke
row_add_table_to_background_drop_list() if any locks exist on the table,
the mere existence of locks (which is guaranteed during ROLLBACK) is
enough to protect the table from disappearing. Hence, acquiring and
releasing dict_operation_lock for every row that is being rolled back is
unnecessary.

row_undo(): Remove the unnecessary acquisition and release of
dict_operation_lock.

Note: row_add_table_to_background_drop_list() is mostly working around
bugs outside InnoDB:
MDEV-21175 (insufficient MDL protection of FOREIGN KEY operations)
MDEV-21602 (incorrect error handling of CREATE TABLE...SELECT).

Regretfully, the parameter innodb_log_checksums was introduced
in MySQL 5.7.9 (the first GA release of that series) by
mysql/mysql-server@af0acedd885eb7103e319f79d25fda7386ef1506
which partly replaced a parameter that had been introduced in 5.7.8
mysql/mysql-server@22ba38218e1d76c24f69b5a5595ad3bf5933acb0
as innodb_log_checksum_algorithm.

Given that the CRC-32C operations are accelerated on many processor
implementations (AMD64 with SSE4.2; since MDEV-22669 also on IA-32
with SSE4.2, POWER 8 and later, ARMv8 with some extensions)
and by lookup tables when only generic SISD instructions are available,
there should be no valid reason to disable checksums.

In MariaDB 10.5.2, as a preparation for MDEV-12353, MDEV-19543 deprecated
and ignored the parameter innodb_log_checksums altogether. This should
imply that after a clean shutdown with innodb_log_checksums=OFF one
cannot upgrade to MariaDB Server 10.5 at all.

Due to these problems, let us deprecate the parameter innodb_log_checksums
and honor it only during server startup.
The command SET GLOBAL innodb_log_checksums will always set the
parameter to ON.

dict_col_t::same_encoding(), dict_col_t::same_format(): Allow
an instantaneous change of a column to a compatible encoding,
just like ha_innobase::can_convert_string() and similar functions do.

Problem:
=======
InnoDB drops the column which has foreign key relations on it. So it
tries to load the foreign key during rename process of copy algorithm
even though the foreign_key_check is disabled.

Solution:
========
During alter copy algorithm, InnoDB ignores the error while loading
the foreign key constraint if foreign key check is disabled. It
should throw the warning about failure of the foreign key constraint
when foreign key check is disabled.

This problem is caused by 6697135c
(MDEV-21572). During recovery, InnoDB prefetches the siblings of
change buffer index leaf page. It does asynchronous page read
and recovery scenario wasn't handled in buf_read_page_background().
It leads to the refusal of startup of the server.

Solution:
=========
  InnoDB shouldn't allow the change buffer index page siblings
to be prefetched.

Remove __bss_start & Co, because systen call "write" check buffer address and return EFAULT if it is wrong.

Adding any unknown option to the "[mysqld_safe]" section makes
mysqld impossible to start with mysqld_multi. For example, after
adding the unknown option "numa_interleave" to the "[mysqld_safe]"
section, mysqld_multi exits with the following diagnostics:

[ERROR] /usr/local/mysql/bin/mysqld: unknown option '--numa_interleave'

To get rid of this behavior, this patch by default adds the "--loose-"
prefix to all unknown (for mysqld_safe) options. This behavior can be
enabled explicitly with the --ignore-unknown option and disabled with
the --no-ignore-unknown option.

btr_validate_index(): do not stop checking after some level failed.
That way it'll become possible to see errors in leaf pages even when
uppers layers are corrupted too.

page_validate(): check info_bits and status_bits more

Fix : Do not INSTALL anything with cmake from data folder.

Since MDEV-18778, timezone tables get changed to innodb
to allow them to be replicated to other galera nodes.

Even without galera, timezone tables could be declared innodb.
With the standalone innodb tables, the mysql_tzinfo_to_sql takes
approximately 27 seconds.

With the transactions enabled in this patch, 1.2 seconds is
the approximate load time.

While explicit checks for the engine of the time zone tables could be
done, or checks against !opt_skip_write_binlog, non-transactional
storage engines will just ignore the transactional state without
even a warning so its safe to enact globally.

Leap seconds are pretty much ignored as they are a single insert
statement and have gone out of favour as they have caused MariaDB
stalls in the past.

During SST we need to let FTWRL to use normal timeout method
even when client is disconnected.

Protocol_local fixed so it can be used now.
Some Protocol:: methods made virtual so they can adapt.
as well as net_ok and net_send_error functions.
execute_sql_string function is exported to the plugins.
To be changed with the mysql_use_result.

It allows to skip db and table name when printing table column references.

Print the condition being pushed.

During SST we need to let FTWRL to use normal timeout method
even when client is disconnected.

The previous commit was erroneously marked as MDEV-23162.
The correct issue is MDEV-23478.

An alternative implementation (replacing the one based on repertoire).

This implementation makes Field send itself to Protocol_text using
data type specific Protocol methods rather than field->val_str()
followed by protocol_text->store_str().

As now Field sends itself in the same way to all protocol types
(e.g. Protocol_binary, Protocol_text, Protocol_local),
the method Field::send_binary() was renamed just to Field::send().

Note, this change introduces symmetry between Field and Item,
because Items also send themself using a single method Item::send(),
which is used for *all* protocol types.

Performance improvement is achieved by the fact that Protocol_text
implements these data type specific methods using store_numeric_string_aux()
rather than store_string_aux(). The conversion now happens only when
character_set_results is not ASCII compatible character sets
(e.g. UCS2, UTF16, UTF32).

In the old code (before any MDEV-23162 work, e.g. as of 10.5.4),
Protocol_text::store(Field*) used val_str() for all data types.
So the execution went through the character set conversion routines
even for numeric and temporal data types.

Benchmarking summary (see  details in MDEV-23478):

The new approach stably demonstrates additional improvement comparing
to the previous implementation (the smaller time - the better):

Original   - the commit before MDEV-23162
             be98036f

        1m9.336s
        1m9.290s
        1m9.300s

MDEV-23162 - the repertoire optimization

        1m6.101s
        1m5.988s
        1m6.264s

MDEV-23478 - this commit

        1m2.150s
        1m2.079s
        1m2.099s

This reverts commit eb2eaba7.

A different implementation of MDEV-23162 is coming.

As the first entry, define user 'ottok' (Otto Kekäläinen) as the person
who by default gets assigned all PRs that modify the debian/ contents.