This eliminates some "unused variable" warnings when building
InnoDB Hot Backup in such a way that all mutex operations are no-ops.

name of the index.

In Hot Backup, do not invoke comparison functions, as MySQL collations
will be unavailable.

parameters in log0log.

Replace srv_sys->dummy_ind1 and srv_sys->dummy_ind2 with
dict_ind_redundant and dict_ind_compact, initialized in dict_init().

  ------------------------------------------------------------------------
  r4481 | marko | 2009-03-19 15:01:48 +0200 (Thu, 19 Mar 2009) | 6 lines

  branches/5.1: row_unlock_for_mysql(): Do not unlock records that were
  modified by the current transaction.  This bug was introduced or unmasked
  in r4400.

  rb://97 approved by Heikki Tuuri
  ------------------------------------------------------------------------

Remove mysql-test/patches/bug41893.diff because that bug has been fixed
in the MySQL repository, see http://bugs.mysql.com/41893.

Increment the InnoDB Plugin version from 1.0.3 to 1.0.4 now that
1.0.3 has been released.

Remove mysql-test/patches/bug32625.diff because that bug was fixed in
the mysql repository (1 year and 4 months after sending them the simple
patch!). See http://bugs.mysql.com/32625

level == SYNC_BUF_BLOCK more readable.

before dereferencing it.  In this way, ut_list_node_313 will be
pointing to the last non-NULL list item at the time of the assertion
failure.  (gcc-4.3.2 -O3 seems to optimize the common subexpressions
and make the variable NULL, though.)

adjust all callers.

  ------------------------------------------------------------------------
  r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 2 lines

  branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position
  also for unlock_row().  (Bug #39320)
  ------------------------------------------------------------------------
  r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 5 lines

  branches/5.1: Fix a bug in multi-table semi-consistent reads.
  Remember the acquired record locks per table handle (row_prebuilt_t)
  rather than per transaction (trx_t), so that unlock_row should successfully
  unlock all non-matching rows in multi-table operations.
  This deficiency was found while investigating Bug #39320.
  ------------------------------------------------------------------------

These were submitted as rb://94 and rb://96 and approved by Heikki Tuuri.

initialize FIL_PAGE_TYPE.  This will make it easier to write the debug
assertions for ibbackup --apply-log.

in a separate redo log entry.  This will make ibbackup --apply-log
debugging easier.

The dynamic plugin on Windows used to be built with MYSQL_SERVER
compile flag, while it is not the case for other platforms.
r3797 assumed MYSQL_SERVER was not defined for dynamic plugin,
which introduced the engine crash during dropping a database.

Add ChangeLog entry for the bugfix in c4360.

  ------------------------------------------------------------------------
  r4359 | vasil | 2009-03-05 21:42:01 +0200 (Thu, 05 Mar 2009) | 14 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  Merge a change from MySQL:
  
    ------------------------------------------------------------
    revno: 2747
    committer: Timothy Smith <timothy.smith@sun.com>
    branch nick: 51
    timestamp: Fri 2009-01-16 17:49:07 +0100
    message:
      Add another cast to ignore int/ulong difference in error types, silence warning on Win64
    modified:
      storage/innobase/handler/ha_innodb.cc
  
  ------------------------------------------------------------------------

  ------------------------------------------------------------------------
  r4358 | vasil | 2009-03-05 21:21:10 +0200 (Thu, 05 Mar 2009) | 21 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  Merge a change from MySQL:
  
    ------------------------------------------------------------
    revno: 2728.19.1
    committer: Alfranio Correia <alfranio.correia@sun.com>
    branch nick: mysql-5.1-bugteam
    timestamp: Tue 2009-02-03 11:36:46 +0000
    message:
      BUG#42445 Warning messages in innobase/handler/ha_innodb.cc
            
      There was a type casting problem in the storage/innobase/handler/ha_innodb.cc,
      (int ha_innobase::write_row(...)). Innobase uses has an internal error variable
      of type 'ulint' while mysql uses an 'int'. 
            
      To fix the problem the function manipulates an error variable of
      type 'ulint' and only casts it into 'int' when needs to return the value.
    modified:
      storage/innobase/handler/ha_innodb.cc
  
  ------------------------------------------------------------------------

  ------------------------------------------------------------------------
  r4325 | sunny | 2009-03-02 02:28:52 +0200 (Mon, 02 Mar 2009) | 10 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test
  
  branches/5.1: Bug#43203: Overflow from auto incrementing causes server segv
  It was not a SIGSEGV but an assertion failure. The assertion was checking
  the invariant that *first_value passed in by MySQL doesn't contain a value
  that is greater than the max value for that type. The assertion has been
  changed to a check and if the value is greater than the max we report a
  generic AUTOINC failure.
  
  rb://93
  Approved by Heikki
  
  ------------------------------------------------------------------------

Implement a check whether pthread_t objects can be used by GCC atomic
builtin functions. This check is implemented in plug.in and defines the
macro HAVE_ATOMIC_PTHREAD_T. This macro is checked in univ.i and the
relevant part of the code enabled (the one that uses GCC atomics against
pthread_t objects).

In addition to this, the same program that is compiled as part of the
plug.in check is added in ut/ut0auxconf.c. In the InnoDB Plugin source
archives that are shipped to the users, a generated Makefile.in is added.
That Makefile.in will be modified to compile ut/ut0auxconf.c and define
the macro HAVE_ATOMIC_PTHREAD_T if the compilation succeeds. I.e.
Makefile.in will emulate the work that is done by plug.in. This is done in
order to make the check happen and HAVE_ATOMIC_PTHREAD_T eventually
defined without regenerating MySQL's ./configure from
./storage/innobase/plug.in. The point is not to ask users to install the
autotools and regenerate ./configure.

rb://95

Approved by:	Marko

Fix typo made in r4353.

As suggested by Ken, print a message that says that the Google SMP patch
(GCC atomics) is disabled if it is. Also extend the message when the patch
is partially enabled to make it clear that it is partially enabled.

Add FreeBSD to the list of the operating systems that have
sizeof(pthread_t) == sizeof(void*) (i.e. word size).

On FreeBSD pthread_t is defined like:

  /usr/include/sys/_pthreadtypes.h:

  typedef struct  pthread                 *pthread_t;

I did the following tests (per Inaam's recommendation):

a) appropriate version of GCC is available on that platform (4.1.2 or
higher for atomics to be available)

  On FreeBSD 6.x the default compiler is 3.4.6, on FreeBSD 7.x the default
  one is 4.2.1. One can always install the version of choice from the ports
  collection. If gcc 3.x is used then HAVE_GCC_ATOMIC_BUILTINS will not be
  defined and thus the change I am committing will make no difference.

b) find out if sizeof(pthread_t) == sizeof(long)

  On 32 bit both are 4 bytes, on 64 bit both are 8 bytes.

c) find out the compiler generated platform define (e.g.: __aix, __sunos__
etc.)

  The macro is __FreeBSD__.

d) patch univ.i with the appropriate platform define
e) build the mysql
f) ensure it is using atomic builtins (look at the err.log message at
system startup. It should say we are using atomics for both mutexes and
rw-locks)
g) do sanity testing (keeping in view the smp changes)

  I ran the mysql-test suite. All tests pass.

This is a fix for issue#178. Instead of using UNIV_LINUX which is
defined through CFLAGS we use compiler generated define __linux__
that is effective for both .c and .cc files.

This is to revert the changes made to the plug.in (r4251) as a fix for
issue# 178. Changes to plug.in will not propogate to a plugin
installation unless autotools are rerun which is unacceptable.

A fix for issue# 178 will be committed in a separate commit.

FIL_PAGE_TYPE mismatch even when purging a BLOB.
Heavy users may have large data files created with MySQL 5.0 or earlier,
and they don not want to have the error log flooded with such messages.

This fixes Issue #182.

Apply any necessary patches to the mysql tree at the end of setup.sh
This step was previously done manually (and sometimes forgotten).

Do not output the commands that restore the environment because they depend
on the state of the environment before the test starts executing.

White-space cleanup in the ChangeLog

again, to finally put Issue #181 to rest.

Revert some parts of r4274.  It is best not to call ut_malloc() before
srv_general_init().

mem_init(): Do not call ut_mem_init().

srv_general_init(): Initialize the memory subsystem in two phases:
first ut_mem_init(), then mem_init().  This is because os_sync_init()
and sync_init() depend on ut_mem_init() and mem_init() depends on
os_sync_init() or sync_init().

srv_parse_data_file_paths_and_sizes(),
srv_parse_log_group_home_dirs(): Remove the output parameters.  Assign
to the global variables directly.  Allocate memory with malloc()
instead of ut_malloc(), because these functions will be called before
srv_general_init().

srv_free_paths_and_sizes(): New function, for cleaning up after
srv_parse_data_file_paths_and_sizes() and
srv_parse_log_group_home_dirs().

rb://92 approved by Sunny Bains

Fix Bug synopsis and remove explanation

Make ChangeLog entries for bugs in bugs.mysql.com in the form:
Fix Bug#12345 bug title
(for bugs after 1.0.2 was released and the ChangeLog published)

There is no need to bloat the ChangeLog with information that is available
via bugs.mysql.com.

Discussed with:	Marko

Add ChangeLog entry for the fix in r4288.