Reviewed by: Nayuta Yanagisawa

Reviewed by: Nayuta Yanagisawa

Reviewed by: Nayuta Yanagisawa

ha_innobase::prepare_inplace_alter_table(): If the ALTER TABLE
operation is no-op for InnoDB, do reset m_prebuilt->trx_id
so that ha_innobase::table_version() will always report either 0
or the identifier of the transaction that would commit changes
to the InnoDB data dictionary.

The failure scenario involved a completed DROP INDEX followed by
a no-op ALTER TABLE during which the server was killed.
An effort to create a reproducible test failed.

MDEV-28769 Assertion `(m_ci->state & 32) || m_with_collate' failed in Lex_exact_charset_opt_extended_collate::Lex_exact_charset_opt_extended_collate on SET NAMES

These system variables:
  @@character_set_client
  @@character_set_connection
  @@character_set_database
  @@character_set_filesystem
  @@character_set_results
  @@character_set_server

can now be set in numeric format only to IDs of default collations, e.g.:

SET @@character_set_xxx=9;  -- OK    (latin2_general_ci  is default)
SET @@character_set_xxx=2;  -- ERROR (latin2_czech_cs is not default)
SET @@character_set_xxx=21; -- ERROR (latin2_hungarian_ci is not default)

Before this change the server accepted IDs of non-default collations
so all three examples above worked without errors,
but this could lead to unexpected behavior in later statements.

Since commit 0b47c126 (MDEV-13542)
we treat all-zero pages as corrupted ones.

During a stress test, a read-ahead of an all-zero page was triggered
and the page read was completed concurrently with buf_page_create_low().
This caused the assertion to fail, because buf_page_create_low() was
waiting for the page latch.

buf_page_get_low(): Only invoke buf_pool_t::corrupted_evict()
if the block was not already marked as corrupted.

buf_page_create_low(): On page identifier mismatch, retry the
buf_pool.page_hash lookup.

buf_pool_t::corrupted_evict(): Set the state of the block to FREED
so that a concurrent buf_page_get_low() will refuse to load the page.
Wait for the page latch to be vacant before proceeding to remove
the block from buf_pool.page_hash and buf_pool.LRU.

page_id_t::set_corrupted(), page_id_t::is_corrupted(): Accessors
for indicating a corrupted page identifier.

Tested by Matthias Leich

Reviewed by: Nayuta Yanagisawa

Avoid the loop with getting rid of back and forth jumping.

In commit c4c88307 (MDEV-28111) we disabled
the file system cache on the InnoDB write-ahead log file (ib_logfile0)
by default on Linux.

It turns out that especially with innodb_flush_trx_log_at_commit=2,
writing to the log via the file system cache typically improves throughput,
especially on slow storage or at a small number of concurrent transactions.
For other values of innodb_flush_log_at_trx_commit, direct writes were
observed to be mostly but not always faster. Whether it pays off to
disable the file system cache on the log may depend on the type of storage,
the workload, and the operating system kernel version.

On Linux and Microsoft Windows, we will introduce the settable Boolean
global variable innodb_log_file_buffering that indicates whether the
file system cache on the redo log file is enabled. The default value is
innodb_log_file_buffering=OFF. If the server is started up with
innodb_flush_log_at_trx_commit=2, the value will be changed to
innodb_log_file_buffering=ON.

When a persistent memory interface is being used for the log,
the value cannot be changed from innodb_log_file_buffering=OFF.
On Linux, when the physical block size cannot be determined
to be a power of 2 between 64 and 4096 bytes, the file system cache
cannot be disabled, and innodb_log_file_buffering=ON cannot be changed.

Server log messages will indicate whether the file system cache is
enabled for the redo log:

[Note] InnoDB: Buffered log writes (block size=512 bytes)
[Note] InnoDB: File system buffers for log disabled (block size=512 bytes)

After this change, the startup parameter innodb_flush_method will no
longer control whether O_DIRECT will be set on the redo log on Linux.

On other operating systems that support O_DIRECT, no interface has been
implemented for controlling the file system cache for the redo log.
The innodb_flush_method values O_DIRECT, O_DIRECT_NO_FSYNC, O_DSYNC
will enable O_DIRECT for data files, not the log.

Tested by: Matthias Leich, Axel Schwenke

trx_purge_free_segment(): Do mark that the block will be modified.

It seems possible that this regression was introduced by the
changes to the page-freeing logic
in commit 4179f93d (MDEV-18976).

Tested by: Matthias Leich

- innodb_fts.sync_block doesn't make sense after MDEV-25581's patch
because fts cache syncing is done as a part of insert operation
and it leads to completion of select over insert sometimes.
This test case is not relevant any more

In commit 73fee39e (MDEV-27985)
a regression was introduced that would cause bpage=nullptr to
be referenced.

buf_flush_LRU_list_batch(): Always terminate the loop upon
encountering a null pointer.

MDEV-26127 Assertion `err != DB_DUPLICATE_KEY' failed or InnoDB: Failing assertion: id != 0 on ALTER ... REBUILD PARTITION

During rebuild of partition, the partitioning engine calls
alter_close_table(), which does not unlock and close some table
instances of the target table.
Then, the engine fails to rename partitions because there are table
instances that are still locked.

Closing all the table instance of the target table fixes the bug.

innodb_drop_database(): Use explicit TO_BINARY casts on
SYS_TABLES.NAME, which for historical reasons uses the wrong collation
latin1_swedish_ci instead of BINARY.

These had been damaged during some merge which caused --embedded
test to fail

Compiling hashicorp plugin statically got many InnoDB
encryption test to fail with errors like:
Error: InnoDB: The page [page id: space=5, page number=3] in file './test/t1.ibd' cannot be decrypted.

MariaDB codebase is huge and Lintian has lots of test than
can fire false-positive warnings which leads to situation
where real problems can't be spotted.

Suspend obvious false-positive Lintian warnings and
let Lintian problems that needs some love shine
out.

Suspends in package mariadb-test-data

Supporting BSD family needs to use '/usr/bin/env perl' and not '/usr/bin/perl'
Perl script are for testing and not for production in mariadb-test-data
package:
 * incorrect-path-for-interpreter

There is several files with national-encoding which are test file so they
can't be in unicode charset
 * national-encoding

Serveral test paths are intentionally repeated:
 * repeated-path-segment

Suspends in package mariadb-test

Supporting BSD family needs to use '/usr/bin/env perl' and not '/usr/bin/perl'
Perl script are for testing and not for production in mariadb-test-data
package:
 * incorrect-path-for-interpreter

Suspends in package source package

Remade some 'version-substvar-for-external-package' to use
regex.

MGroonga is missing source file 'jquery-ui-1.8.18.custom.js' correct
lintian suspend with regex:
 * source-is-missing

There is several files with very long line lenghts. Add suspends
for those that can't be corrected in several places. Most
of them are test result files, SQL test files or intentional
long lines that can't be splitted.
  * very-long-line-length-in-source-file

There is several autogenerated C++ files which probably should not
be there but they should not do any harm:
 * source-contains-autogenerated-visual-c++-file

Problem:
========
  InnoDB FTS requesting the fts sync of the table once the fts
cache size reaches 1/10 of innodb_ft_cache_size. But fts_sync()
releases cache lock when writing the word. By doing this, InnoDB
insert thread increases the innodb fts cache memory and
SYNC operation will take more time to complete.

Solution:
=========
  Remove the fts sync operation(FTS_MSG_SYNC_TABLE) from
the fts optimize background thread. Instead of that,
allow user thread to sync the InnoDB fts cache when
the cache size exceeds 512 kb. User thread holds
cache lock while doing cache syncing, it make sure that
other threads doesn't add the docs into the cache.

Removed FTS_MSG_SYNC_TABLE and its related function
because we do remove the FTS_MSG_SYNC_TABLE message
itself.

Removed fts_sync_index_check() and all related
function because other threads doesn't add while
cache operation going on.

This fixes up commit 3d241eb9