Skip to content

P
pim_dm
Commit 54baf0b5 authored by Pedro Oliveira's avatar Pedro Oliveira
Browse files
Options

reuse topology from broadcast tree

parent 7494e2c8
Hide whitespace changes
Inline Side-by-side
Showing with 929 additions and 47 deletions
TestResults/log.txt 0 → 100644
View file @ 54baf0b5
This source diff could not be displayed because it is too large. You can view the blob instead.
emulation/client0.startup
View file @ 54baf0b5
ip addr add dev eth0 10.6.6.100/24
ip addr add dev eth0 10.8.8.100/24
ip link set dev eth0 up
#default route para obter conectividade internet
ip route add 0.0.0.0/0 via 10.6.6.5
ip route add 0.0.0.0/0 via 10.8.8.7
#apt-get update && apt-get --assume-yes install python3 python3-pip
......
emulation/lab.conf
View file @ 54baf0b5
......@@ -5,11 +5,11 @@ router1[0]=source
router1[1]=A
router1[2]=B
router1[3]=C
router1[4]=tap,192.168.2.1,192.168.2.2
router1[mem]=256
router2[0]=A
router2[1]=switchnetwork0
router2[2]=router2and7
router2[mem]=256
router3[0]=B
......@@ -21,14 +21,17 @@ router4[1]=switchnetwork2
router4[mem]=256
router5[0]=switchnetwork3
router5[1]=client0
router5[1]=router5and7
router5[mem]=256
router6[0]=switchnetwork4
router6[1]=client1
router6[mem]=256
router7[0]=router5and7
router7[1]=client0
router7[2]=router2and7
router7[mem]=256
#########################################
......@@ -39,7 +42,6 @@ switch1[1]=switchnetwork1
switch1[2]=switchnetwork2
switch1[3]=switchnetwork3
switch1[4]=switchnetwork4
switch1[5]=logserver
switch1[mem]=256
......@@ -55,8 +57,3 @@ client0[mem]=256
client1[0]=client1
client1[mem]=256
log_server[0]=logserver
log_server[mem]=256
emulation/lab.dep
View file @ 54baf0b5
......@@ -5,7 +5,8 @@ router4: router1
switch1: router2 router3 router4
router5: switch1
router6: switch1
router7: router5
log_server: switch1
client0: router5
client0: router7
client1: router6
emulation/log_server.startup deleted 100644 → 0
View file @ 7494e2c8
ip addr add dev eth0 10.5.5.100/24
ip link set dev eth0 up
#default route para obter conectividade internet
ip route add 0.0.0.0/0 via 10.5.5.2
#apt-get update && apt-get --assume-yes install python3 python3-pip
emulation/router1.startup
View file @ 54baf0b5
......@@ -9,7 +9,7 @@ ip link set dev eth3 up
#NAT for private ip's
iptables -t nat -A POSTROUTING -s 0.0.0.0/0 -o eth4 -j MASQUERADE
#iptables -t nat -A POSTROUTING -s 0.0.0.0/0 -o eth4 -j MASQUERADE
# Zebra and OSPF
/etc/init.d/quagga restart
......
emulation/router1/etc/quagga/ospfd.conf
View file @ 54baf0b5
......@@ -12,7 +12,6 @@ router ospf
network 10.2.2.0/24 area 0
network 10.3.3.0/24 area 0
network 10.4.4.0/24 area 0
network 192.168.2.0/24 area 0
default-information originate always
!
log stdout
emulation/router1/root/script.sh
View file @ 54baf0b5
......@@ -3,9 +3,15 @@ cp -rf /hosthome/Desktop/pim/ MulticastRouting/
cd MulticastRouting
#pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
tcpdump -i eth0 -w /hosthome/Desktop/test_pim/pim/TestResults/Router1_Source.pcap &
tcpdump -i eth1 -w /hosthome/Desktop/test_pim/pim/TestResults/Router1_Router2.pcap &
tcpdump -i eth2 -w /hosthome/Desktop/test_pim/pim/TestResults/Router1_Router3.pcap &
tcpdump -i eth2 -w /hosthome/Desktop/test_pim/pim/TestResults/Router1_Router4.pcap &
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R1 10.5.5.100
python3 Run.py -t R1 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aiigmp eth2
......
emulation/router2.startup
View file @ 54baf0b5
......@@ -2,6 +2,8 @@ ip addr add dev eth0 10.2.2.2/24
ip link set dev eth0 up
ip addr add dev eth1 10.5.5.2/24
ip link set dev eth1 up
ip addr add dev eth2 10.9.9.2/24
ip link set dev eth2 up
#default route para obter conectividade internet
#ip route add 0.0.0.0/0 via 10.2.2.1
......
emulation/router2/etc/quagga/ospfd.conf
View file @ 54baf0b5
......@@ -10,5 +10,6 @@ password zebra
router ospf
network 10.2.2.0/24 area 0
network 10.5.5.0/24 area 0
network 10.9.9.0/24 area 0
!
log stdout
emulation/router2/root/script.sh
View file @ 54baf0b5
......@@ -5,9 +5,11 @@ cd MulticastRouting
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R2 10.5.5.100
python3 Run.py -t R2 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aiigmp eth2
python3 Run.py -aisr eth0
python3 Run.py -aisr eth1
python3 Run.py -aisr eth2
python3 Run.py -v
emulation/router3/root/script.sh
View file @ 54baf0b5
......@@ -5,7 +5,7 @@ cd MulticastRouting
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R3 10.5.5.100
python3 Run.py -t R3 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aisr eth0
......
emulation/router4/root/script.sh
View file @ 54baf0b5
......@@ -5,7 +5,7 @@ cd MulticastRouting
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R4 10.5.5.100
python3 Run.py -t R4 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aisr eth0
......
emulation/router5/root/script.sh
View file @ 54baf0b5
......@@ -5,7 +5,7 @@ cd MulticastRouting
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R5 10.5.5.100
python3 Run.py -t R5 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aisr eth0
......
emulation/router6/root/script.sh
View file @ 54baf0b5
......@@ -5,7 +5,7 @@ cd MulticastRouting
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R6 10.5.5.100
python3 Run.py -t R6 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aisr eth0
......
emulation/router7.startup 0 → 100644
View file @ 54baf0b5
ip addr add dev eth0 10.6.6.7/24
ip link set dev eth0 up
ip addr add dev eth1 10.8.8.7/24
ip link set dev eth1 up
ip addr add dev eth2 10.9.9.7/24
ip link set dev eth2 up
#default route para obter conectividade internet
#ip route add 0.0.0.0/0 via 10.5.5.2
# Zebra and OSPF
/etc/init.d/quagga restart
# wait for default route information from OSPF
while ! $(ip route | grep -q "default")
do
sleep 2
done
echo VTYSH_PAGER=more > /etc/environment
emulation/router7/etc/quagga/daemons 0 → 100644
View file @ 54baf0b5
# This file tells the quagga package which daemons to start.
#
# Entries are in the format: <daemon>=(yes|no|priority)
# 0, "no" = disabled
# 1, "yes" = highest priority
# 2 .. 10 = lower priorities
# Read /usr/share/doc/quagga/README.Debian for details.
#
# Sample configurations for these daemons can be found in
# /usr/share/doc/quagga/examples/.
#
# ATTENTION:
#
# When activation a daemon at the first time, a config file, even if it is
# empty, has to be present *and* be owned by the user and group "quagga", else
# the daemon will not be started by /etc/init.d/quagga. The permissions should
# be u=rw,g=r,o=.
# When using "vtysh" such a config file is also needed. It should be owned by
# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
#
# The watchquagga daemon is always started. Per default in monitoring-only but
# that can be changed via /etc/quagga/debian.conf.
#
zebra=yes
bgpd=no
ospfd=yes
ospf6d=no
ripd=no
ripngd=no
isisd=no
babeld=no
emulation/router7/etc/quagga/debian.conf 0 → 100644
View file @ 54baf0b5
#
# If this option is set the /etc/init.d/quagga script automatically loads
# the config via "vtysh -b" when the servers are started.
# Check /etc/pam.d/quagga if you intend to use "vtysh"!
#
vtysh_enable=yes
zebra_options=" --daemon -A 127.0.0.1"
bgpd_options=" --daemon -A 127.0.0.1"
ospfd_options=" --daemon -A 127.0.0.1"
ospf6d_options=" --daemon -A ::1"
ripd_options=" --daemon -A 127.0.0.1"
ripngd_options=" --daemon -A ::1"
isisd_options=" --daemon -A 127.0.0.1"
babeld_options=" --daemon -A 127.0.0.1"
#
# Please note that watchquagga_options is an array and not a string so that
# quotes can be used.
#
# The list of daemons to watch is automatically generated by the init script
# from daemons.conf and appended to the watchquagga_options.
# Example:
# watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start' -k '/sbin/service %s stop')
watchquagga_enable=yes
watchquagga_options=(--daemon)
emulation/router7/etc/quagga/ospfd.conf 0 → 100644
View file @ 54baf0b5
! -*- ospf -*-
!
! OSPFd sample configuration file
!
!
hostname ospfd
password zebra
!enable password please-set-at-here
!
interface eth2
ip ospf cost 100
!
router ospf
network 10.6.6.0/24 area 0
network 10.8.8.0/24 area 0
network 10.9.9.0/24 area 0
!
log stdout
emulation/router7/etc/quagga/vtysh.conf 0 → 100644
View file @ 54baf0b5
!
! Sample configuration file for vtysh.
!
!service integrated-vtysh-config
hostname quagga-router
username root nopassword
!
emulation/router7/etc/quagga/zebra.conf 0 → 100644
View file @ 54baf0b5
! -*- zebra -*-
!
! zebra sample configuration file
!
! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
!
hostname Router
password zebra
enable password zebra
!
! Interface's description.
!
!interface lo
! description test of desc.
!
!interface sit0
! multicast
!
! Static default route sample.
!
!ip route 0.0.0.0/0 203.181.89.241
!
!log file /var/log/quagga/zebra.log
emulation/router7/root/script.sh 0 → 100644
View file @ 54baf0b5
rm -rf MulticastRouting/
cp -rf /hosthome/Desktop/pim/ MulticastRouting/
cd MulticastRouting
#pip-3.2 install --index-url=https://pypi.python.org/simple/ -r requirements.txt
tcpdump -i eth0 -w /hosthome/Desktop/test_pim/pim/TestResults/Router7_Client0.pcap &
tcpdump -i eth1 -w /hosthome/Desktop/test_pim/pim/TestResults/Router7_Router2.pcap &
tcpdump -i eth2 -w /hosthome/Desktop/test_pim/pim/TestResults/Router7_Router5.pcap &
python3 Run.py -stop
python3 Run.py -start
python3 Run.py -t R7 10.5.5.7
python3 Run.py -aiigmp eth0
python3 Run.py -aiigmp eth1
python3 Run.py -aiigmp eth2
python3 Run.py -aisr eth0
python3 Run.py -aisr eth1
python3 Run.py -aisr eth2
python3 Run.py -v
emulation/switch1.startup
View file @ 54baf0b5
......@@ -3,14 +3,12 @@ ip link set dev eth1 up
ip link set dev eth2 up
ip link set dev eth3 up
ip link set dev eth4 up
ip link set dev eth5 up
brctl addbr br0
brctl addif br0 eth0
brctl addif br0 eth1
brctl addif br0 eth2
brctl addif br0 eth3
brctl addif br0 eth4
brctl addif br0 eth5
ip link set dev br0 up
ip addr add dev br0 10.5.5.7/24
......
emulation/log_server/root/ServerLogSR.py → emulation/switch1/root/ServerLogSR.py
View file @ 54baf0b5
......@@ -96,7 +96,7 @@ class LogRecordSocketReceiver(socketserver.ThreadingTCPServer):
def main():
handler = TestHandler(sys.stdout)
formatter = logging.Formatter('%(name)-50s %(levelname)-8s %(tree)-35s %(vif)-2s %(interfacename)-5s %(routername)-2s %(message)s')
formatter = logging.Formatter('%(name)-50s %(levelname)-8s %(asctime)-25s %(tree)-35s %(vif)-2s %(interfacename)-5s %(routername)-2s %(message)s')
handler.setFormatter(formatter)
logging.getLogger('my_logger').addHandler(handler)
logging.getLogger('my_logger').addFilter(CustomFilter())
......@@ -104,10 +104,10 @@ def main():
t = threading.Thread(target=worker)
t.start()
tcpserver = LogRecordSocketReceiver(host='10.5.5.100')
tcpserver = LogRecordSocketReceiver(host='10.5.5.7')
print('About to start TCP server...')
tcpserver.serve_until_stopped()
if __name__ == '__main__':
main()
\ No newline at end of file
main()
emulation/log_server/root/TestStateRefresh.py → emulation/switch1/root/TestStateRefresh.py
View file @ 54baf0b5
......@@ -3,8 +3,13 @@ from abc import ABCMeta
class CustomFilter(logging.Filter):
def filter(self, record):
return record.name in ("pim.KernelEntry.UpstreamInterface.Originator", "pim.KernelEntry.DownstreamInterface.JoinPrune", "pim.KernelEntry.UpstreamInterface.JoinPrune", "pim.KernelInterface") and \
record.routername in ["R1", "R2","R3","R4","R5","R6"]
return record.name in ("pim.KernelEntry.UpstreamInterface.Originator",
"pim.KernelEntry.DownstreamInterface.JoinPrune",
"pim.KernelEntry.UpstreamInterface.JoinPrune",
"pim.KernelInterface",
"pim.KernelEntry.DownstreamInterface.Assert",
"pim.KernelEntry.UpstreamInterface.Assert") and\
record.routername in ["R1", "R2", "R3", "R4", "R5", "R6", "R7"]
class Test():
......@@ -32,12 +37,13 @@ class Test():
class Test1(Test):
def __init__(self):
expectedState = {"R1": {"eth0": "O"},
"R2": {"eth0": "NO"},
"R3": {"eth0": "NO"},
"R4": {"eth0": "NO"},
"R5": {"eth0": "NO"},
"R6": {"eth0": "NO"},
expectedState = {"R1": {"eth0": "StateRefresh state transitions to Originator"},
"R2": {"eth0": "StateRefresh state transitions to NotOriginator"},
"R3": {"eth0": "StateRefresh state transitions to NotOriginator"},
"R4": {"eth0": "StateRefresh state transitions to NotOriginator"},
"R5": {"eth0": "StateRefresh state transitions to NotOriginator"},
"R6": {"eth0": "StateRefresh state transitions to NotOriginator"},
"R7": {"eth0": "StateRefresh state transitions to NotOriginator"},
}
success = {"R1": {"eth0": False},
......@@ -46,6 +52,7 @@ class Test1(Test):
"R4": {"eth0": False},
"R5": {"eth0": False},
"R6": {"eth0": False},
"R7": {"eth0": False},
}
super().__init__("Test1", expectedState, success)
......@@ -55,10 +62,9 @@ class Test1(Test):
print("Having Client0 and Client1 interested")
class Test2(Test):
def __init__(self):
expectedState = {"R1": {"eth0": "NO"}
expectedState = {"R1": {"eth0": "StateRefresh state transitions to NotOriginator"}
}
success = {"R1": {"eth0": False},
......@@ -68,9 +74,10 @@ class Test2(Test):
def print_test(self):
print("Test2: After some time without source sending data... router originator should transition to NO")
class Test3(Test):
def __init__(self):
expectedState = {"R1": {"eth0": "O"}
expectedState = {"R1": {"eth0": "StateRefresh state transitions to Originator"}
}
success = {"R1": {"eth0": False},
......
emulation/switch1/root/script.sh deleted 100644 → 0
View file @ 7494e2c8
rm /hosthome/Desktop/state_refresh_capture.pcap
tcpdump -i br0 -Q in -w /hosthome/Desktop/state_refresh_capture.pcap
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7