- 05 Feb, 2021 2 commits
-
-
Łukasz Nowak authored
-
Jérome Perrin authored
Several softwares were using fixed versions, but versions are also defined in stack/slapos.cfg, so let's use from stack/slapos.cfg which will simplify version management. This urllib3 has visible changes for us, it no longer send the request path "as is", but normalizes the . and .. which is not what we want in caddy-frontend test, so we adjust the test to use prepared requests, which is the recommended approach for this kind of low level needs. Since prepared requests does not set default user agent "python-requests", tests checking that user agent is in log files have been adjusted to use a dedicated test user agent header. Another change is that certificates are now verified by default, so we adjust seleniumserver tests to disable certificate validation. jstestnode, already had a patch regarding certificate validation, because we wanted certificates to be validated before it was the default. We just update this patch a bit because we want to keep the optional behaviours of validating against a specific CA or to disable validation.
-
- 04 Feb, 2021 2 commits
-
-
Łukasz Nowak authored
-
Jérome Perrin authored
also update slapos.toolbox to 0.116
-
- 03 Feb, 2021 3 commits
-
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Default and cluster are tested for the most expected usage.
-
Jérome Perrin authored
This test uses the default config of having mariadb log queries taking more than 1 second, then makes two slow queries and check that these two queries are logged and included in pt-query-digest report. Sometimes this test fail because there are more slow queries than the two expected, in the snapshots, we can see that reports also contain: SHOW TABLE STATUS FROM `mysql` LIKE 'time_zone_transition'\G SHOW CREATE TABLE `mysql`.`time_zone_transition`\G but these queries are not made by the test. They are probably made by mysql_upgrade script. Such queries can take more than 1 second sometimes and when they do the test fail because there are more slow queries than the expected. To prevent this kind of intermitent failures, make our test queries slower and configure mariadb to log queries after a longer delay (3 seconds). Hopefully these unrelated queries should not take more than 3 seconds.
-
- 01 Feb, 2021 2 commits
-
-
Jérome Perrin authored
-
Jérome Perrin authored
217f7f05 (slapos-testing: don't pin tested eggs, 2021-01-12) was wrong, some versions needs to be pinned for initial installation of the software. The problem was not visible when the software was already installed and updated in place, but when installing software from scratch, it was failing very early with an error like: While: Bootstrapping. Getting distribution for 'slapos.libnetworkcache'. Error: Picked: slapos.libnetworkcache = 0.20
-
- 29 Jan, 2021 2 commits
-
-
Łukasz Nowak authored
By using a late instance creation, it's possible to escape requirement of the cluster being fully instantiated by default, so it's possible to test various interesting corner cases.
-
Łukasz Nowak authored
-
- 28 Jan, 2021 3 commits
-
-
Kazuhiko Shiozaki authored
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Fixes: * fail fast in case of trouble * treat 1.0 as special working branch and be ok to remove it * select origin/1.0 as source of the local 1.0 branch Thank to this it can be used in clean repository.
-
- 27 Jan, 2021 5 commits
-
-
Łukasz Nowak authored
Fixes: * fail fast in case of trouble * treat 1.0 as special working branch and be ok to remove it * select origin/1.0 as source of the local 1.0 branch Thank to this it can be used in clean repository.
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Thanks to shacache it will be cached anyway, and it allows to easily refer to the source changes and eventual discussion.
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-
- 26 Jan, 2021 8 commits
-
-
Łukasz Nowak authored
Since Jinja 2.11 it's possible to do nice tests against true, false and others, which is important for various type checks.
-
Łukasz Nowak authored
Since "caddy-frontend: Switch monitor ports to internal use" monitor ports are internal usage only and this test is obsolete.
-
Łukasz Nowak authored
It's not used at all in current approach.
-
Łukasz Nowak authored
The public-ipv4 comes from the historical usage of the system, but since new implementation came into place it was never needed, so now it's time to say goodbye. Test has been updated to do in-house mimic of the used IP to access.
-
Łukasz Nowak authored
It's from old approach, which is not going to be implemented.
-
Łukasz Nowak authored
Since recent change the virtualhostroot-https-port and virtualhostroot-http-port are casted to integer during configuration generation so it's require to validate this input and reject incorrect values.
-
Łukasz Nowak authored
As decision making quite often requires access to more than one slave entry, it's better to keep the logic above configuration generation. Also configuration generation is already complex, and it's better to have it simplified, especially in case of switching the component. Use already prepared values from apache-custom-slave-list.cfg.in in default-virtualhost.conf.in to simplify even more. Pass variables to the other profiles without casting them to string, so that they work out of the box.
-
Jérome Perrin authored
Following up !858 to support milliseconds timings in access logs
-
- 25 Jan, 2021 3 commits
-
-
Xavier Thompson authored
-
Vincent Pelletier authored
Remove unused "plugin" entry. Add locally-referenced-but-defined-by-another-file "bin".
-
Vincent Pelletier authored
Should have been part of: commit c787d04c Author: Hardik Juneja <hardik.juneja@nexedi.com> Date: Thu Jun 8 18:39:28 2017 +0200 remove unnecessary monitor_template section form erp5 stack
-
- 22 Jan, 2021 1 commit
-
-
Xavier Thompson authored
-
- 21 Jan, 2021 1 commit
-
-
Jérome Perrin authored
Since bd3c2b18 (Remove httpd from ERP5 and use haproxy instead, 2020-12-14) timing in balancer access log files are in milliseconds, no longer in microseconds as they use to be with apache. We update apachedex to version 1.8, where it supports generating reports from access log files with milliseconds, as long as the expected format is passed with --logformat argument. We changed the default value of apachedex configuration to use the expected --logformat argument, but users with a custom apachedex config passed as instance parameters (monitor.apachedex-configuration) will have to update their request parameters, to also pass --logformat. Since this is breaking change, we take this opportunity to introduce another breaking change, this parameter is not longer a string with all arguments on the same line, which was problematic because these arguments contained quotes and backslashes. The arguments are now passed as a list of strings which will become the list of arguments passed to apachedex. This is implemented by generating an apachedex config file, which simplifies the generation of the wrapper. For this we also needed to upate slapos.toolbox. The same change is reflected to the overriden profiles in slapos-master, but for slapos-master we don't pass the --logformat argument, because slapos-master is using httpd, so the logs timings are still in microseconds.
-
- 20 Jan, 2021 2 commits
-
-
Łukasz Nowak authored
90 bugs fixed since 2.0.17: * 6 major * 30 medium * 54 minor See http://www.haproxy.org/bugs/bugs-2.0.17.html
-
Jérome Perrin authored
-
- 19 Jan, 2021 3 commits
-
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Thanks to work on TrafficServer bug 7425 it was possible to understand correctly the switches and setup ATS to SlapOS CDN needs. max_stale_age with negative_revalidating_enabled is used to simulate stale-if-error and negative_revalidating_lifetime is set to 0, as Expires header provided by this switch is needless in SlapOS case. Tests are updated to follow the real use case, by rewriting ATS configuration to meet times required for the test to finish in reasonable time.
-
Jérome Perrin authored
Update to 1.9.0 ( https://github.com/eclipse-theia/theia/blob/v1.9.0/CHANGELOG.md#v190---16122020 ) Update extensions to newer version and to the URLs from openvsx instead of github, since openvsx prevent maintainers to modify releases. Also use buildout directly to download extensions, so that we verify signatures and have possibility to use cache See merge request nexedi/slapos!873
-
- 18 Jan, 2021 1 commit
-
-
Xavier Thompson authored
See merge request !886
-
- 15 Jan, 2021 2 commits
-
-
Xavier Thompson authored
-
Łukasz Nowak authored
-