* master:
  wendelin.core: v↑ 0.13 -> 2.0.alpha1
  caddy-frontend: Support not resolving backend hostnames
  component/caddy: Use golang 1.17
  software/metabase: configure fonts and tempdir
  software/metabase: generate proper passwords
  software/metabase: version up metabase v0.41.2
  software/metabase: sleep a bit more after "this will erase data" warning
  software/metabase: use temurin JRE
  component/java: add temurin JRE

Update to wendelin.core 2, which reached its alpha state.

Even though it is wendelin.core 2, it continues to work by default in
wendelin.core 1 mode with providing the same stability guarantees as
before. This mode works with all ZODB4, ZODB4-wc2 and ZODB5. However
every Zope has its own private cache for ZBigFile data which wastes RAM,
prevents us to use as many Zopes as there are CPU cores, and potentially
leads to OOM issues where one Zope tend to allocate whole memory while
other Zopes cannot allocate even a single page. This mode, as well as
previous Wendelin.core 1, is also subject to data-corruption that can
happen on ZBigFile's BTree topology change:

nexedi/wendelin.core@8c32c9f6

WCFS mode - that is what wendelin.core 2 actually provides over
wendelin.core 1 - is currently opt-in. When used in "WCFS mode", all
Zopes share cache for ZBigFile data and there should be no data
corruption. This mode works with both ZODB4-wc2 and ZODB5, but not with
plain ZODB4. The way to opt-in into this mode for a software-release is
to set `erp5-defaults:wcfs-enable-default = true`, like SlapOS Master
currently does:

    # SlapOS Master needs to use Wendelin.core 2.
    # Wendelin.core 2 works with either ZODB4-wc2, or ZODB5, but not with ZODB4.
    # ERP5 does not currently work with ZODB5.
    # -> this leaves ZODB4-wc2 as the only choice.
    [ZODB]
    major = 4-wc2

    [erp5-defaults]
    wcfs-enable-default = true

Remove activate-WC2-preview.cfg as wendelin.core 2 is no longer draft
and there should be no need to use my personal repository and dirty
branch anymore.

Update metabase and fix a few minor problems, mostly:
 - use proper passwords for keystore and for postgresql
 - use Eclipse Temurin JRE, where the SSH tunnels work


See merge request nexedi/slapos!1077

The setup "last,libc,none" allows lazy resolving of backend servers which is
crucial in order to being able to start when the domain does not exists (yet).

Follows dae1747d

* master:
  Fix "kvm: Increase default VM parameters to match nowadays requirement"
  kvm: Merge tests
  kvm: Allow to specify network adapter
  software/slapos-sr-testing: install new psycopg2 dependency
  recipe/postgres: support non standard port
  recipe/test_postgres: test with a real postgres server
  software/slapos-testing: install psycopg2 for slapos.cookbook
  software/slapos-testing: make postgresql available for tests
  component/psycopg2: new component
  golang: Switch default to Go1.17
  erp5testnode: update deploy script
  stack/slapos: slapos.cookbook version up (1.0.214)
  Release slapos.cookbook (1.0.214)
  test/recipe: update tests for postgres recipe regarding password update
  recipe/postgres: support changing user password after creation
  component/nxdtest: v↑
  golang: v↑ go1.16 (1.16.8 -> 1.16.10)
  golang: v↑ go1.17 (1.17.1 -> 1.17.3)

This is needed for xlsx export

This solves the issue that ssh tunnels can not be used for database
connections, with sun's java they fail with an error containing:

    JCE cannot authenticate the provider BC

This is an alternate JRE from https://projects.eclipse.org/projects/adoptium.temurin

This version is the one used in metabase docker images

There was missing change in the default value to calculate default maximum
amount of parameters.

This fixes commit 2e6ccd02.

The default virtio-net-pci is not supported by some legacy OSes, so allow
customize it, to provide such support.

This is a dependency of slapos.cookbook[test] since 90650d2c (
recipe/test_postgres: test with a real postgres server, 2021-11-12) and
because we run software schema tests from slapos.cookbook in
software/slapos-sr-testing, we also need the dependency here.

tests with a real postgresql server, the mocked commands from 261a8e6b (test/recipe: update tests for postgres recipe regarding password update, 2021-11-11) were too unrealistic.

These tests with a real server revealed that the port option of the recipe was not used, this is fixed as well

See merge request !1083

even though the recipe has a required option for port, it was not used
and server was always listening on default (5432) port

exposing environment variable SLAPOS_TEST_POSTGRESQL_PREFIX containing
the location where postgresql is installed

taken from unstable lapp stack

Go1.17 is current stable Go release which, besides other improvements,
compared to Go1.16 generates code that runs 5-10-15% faster(*):

https://go.dev/blog/go1.17

It makes sense to use that version by default.

Cc'ing people who might be affected:

- caddy   (@luke)
- hugo    (@lu.xu)
- repman, restic  (@alain.takoudjou, @jerome)
- galene  (@tomo, @alain.takoudjou)
- gitlab  (@alain.takoudjou, @jerome, @lpgeneau)
- grafana (@jerome)
- theia   (@jerome, @xavier_thompson)

If for some reason Go1.17 default does not work for a software,
maintainer of that software release - please pin Go to Go1.16
explicitly inside that particular software-release.

(*) Go blog mentions 5% speedup on the average, but it was reported that
    sometimes for important inner loops the speedup can be as much as 15%.

/reviewed-by @jerome
/reviewed-on nexedi/slapos!1082

The history of deploy script can be seen in slapos.core package with:
git log -p master/bt5/slapos_web_deploy/PathTemplateItem/web_page_module/deploy_*

When server is running, use psql command to connect to server and issue
a query to update password.

This upgrade

- fixes Nxdtest to show proper traceback on error in configuration file

  nexedi/nxdtest@7b5add47

- adds preliminary support for PyLint[2]

  nexedi/nxdtest@72e36088

- and makes nxdtest to emit summary at the end of test run

  nexedi/nxdtest@9f413221

/reviewed-by @jerome
/reviewed-on nexedi/slapos!1081

Going Go1.16.8 -> Go1.16.10 brings in fixes to compiler, runtime and stdlib
including security fixes to linker, archive/zip package.

https://golang.org/doc/devel/release.html#go1.16.minor

Tested via:

- SlapOS.SoftwareReleases.IntegrationTest.Python2 (https://nexedijs.erp5.net/#/test_result_module/20211110-4DA2B2E), and
- SlapOS.SoftwareReleases.IntegrationTest.Python3 (https://nexedijs.erp5.net/#/test_result_module/20211110-40489859)

Going Go1.17.1 -> Go1.17.3 brings in fixes to compiler, runtime and stdlib
including security fixes to linker and archive/zip package.

https://golang.org/doc/devel/release.html#go1.17.minor

Tested via:

- SlapOS.SoftwareReleases.IntegrationTest.Python2 (https://nexedijs.erp5.net/#/test_result_module/20211110-4DA2B2E), and
- SlapOS.SoftwareReleases.IntegrationTest.Python3 (https://nexedijs.erp5.net/#/test_result_module/20211110-40489859)

* master:
  fixup! wendelin.core: Add way to run tests
  Disable DBUS support for zbar as: - it's not used in a SlapOS system (seems only used for webcam support) - it breaks the concept of SlapOs containerization - finally it tries to create a DBUS file in /etc/dbus-1/system.d/ which is NOT   allowed (rightfully) for a slapsoft user
  caucase: set up a host file which specified for it
  software/slapos-testing: add jq, sed and grep in PATH
  software/erp5/test: fix ResourceWarning on python3

In 805374b4 I established the way to run wendelin.core test.  There
component/wendelin.core/test-common.cfg preamble mimics what is setup
by software/neoppod/software-common.cfg in parts for NEO. However I
copied only neoppod into parts without neoppod-develop, and this results
in NEO being installed from PyPI instead of from git checkout.

Let's fix this because everything else - e.g. ERP5 and Wendelin software
releases - use NEO from git checkout which today diverged significantly
from what was last released to PyPI in April of 2019.

Thanks to @jerome for helping to find this out.

See merge request nexedi/slapos!1074

- it's not used in a SlapOS system (seems only used for webcam support)
- it breaks the concept of SlapOs containerization
- finally it tries to create a DBUS file in /etc/dbus-1/system.d/ which is NOT
  allowed (rightfully) for a slapsoft user

This allow caucase test use the random partition IP
address instead of fixed localhost:8000. Which can avoid
the conflict if one test node running multiple test suite.

 - use the requests.Session in a context manager so that resources are
properly closed.
 - close the stdout of caucase process we want to keep silent

See merge request nexedi/slapos!1075

This is used by caucase.sh test

* origin/master: (22 commits)
  component/perl-Image-ExifTool: version up 12.30
  fixup! stack/erp5: use %Ta for timing of haproxy requests
  stack/erp5: use %Ta for timing of haproxy requests
  Revert "kvm: Bang immediately in case of vnc_promise problem"
  kvm: Bang immediately in case of vnc_promise problem
  kvm: Switch mouse to tablet mode
  software/slapos-sr-testing: update doc
  software/slapos-sr-testing: run ERP5 SR test with a python3 slapos.core
  component/depot_tools: check out a fixed revision
  software/erp5/test: add python3 support
  software/galene: use python3
  stack/caucase: Version up caucase 0.9.12
  galene: version up 0.4
  kvm: Increase default VM parameters to match nowadays requirement
  hugo: create tempfiles in a dedicated temporary directory
  component/java-jdk: add missing rpaths
  component/alsa: enable slapos.recipe.cmmi's shared
  kvm: Upgrade default ISO for vm to debian bullseye
  componant/slapos/obs.cfg: update OBS build
  caddy-frontend: Pick up recent kedifa from the distribution
  ...