- 31 Jul, 2024 22 commits
-
-
Xavier Thompson authored
Trigger uninstall + install of eggs installed with zc.recipe.egg:custom or :develop when pinned versions of setup-eggs have changed. To achieve this the versions of setup-eggs are included in the section: this makes them part of its signature so that when they change, buildout will call `uninstall` and `install` for this section instead of just `update`. Unlike other zc.recipe.egg entry points, :custom stores the path of the installed egg; thus `uninstall` will remove it fully, leaving `install` to reinstall it cleanly from scrach. In the case of :develop, `uninstall` matters little as only the path of the installed `.egg-link` is stored. Instead `install` must be fixed to actually rebuild the egg in-place in the source directory and `develop` should do nothing. The main issue lies in `zc.buildout.easy_install.develop`: depending on the build process, it may leave build artifacts in the source directory that cause future runs to do nothing.
-
Xavier Thompson authored
-
Xavier Thompson authored
Pinning zc.buildout = >.1 is now invalid, so use >0.1 instead.
-
Xavier Thompson authored
Adapt filter in tests for pip emitting Python2.7 deprecation warnings to pip >= 20.2.2 and < 21.0 - these versions seem to accidentally add a redundant bit of message to the warning.
-
Xavier Thompson authored
The testing framework, some individual tests and 'buildout:develop' call python setup.py <command> manually, which is deprecated by setuptools. Depending on the setuptools version, suppress the warning for now to avoid polluting the logs.
-
Xavier Thompson authored
-
Xavier Thompson authored
-
Xavier Thompson authored
INFO logs from setuptools which were previously not emitted because setuptool's ad-hoc legacy logger defaulted to WARNING and above may now be emitted because setuptools now logs to the root logger, thus the global root logger's level configuration applied. This caused undesired 'root: <some setuptools info>' messages to be emitted and caused many tests to fail due to unexpected outputs.
-
Xavier Thompson authored
-
Julien Muchembled authored
-
Julien Muchembled authored
When specifying an alternate URL as fallback, the main URL is always used for both downloading & uploading from/to networkcache.
-
Xavier Thompson authored
If slapos.libnetworkcache is importable, install it in bootstrap and in buildout upgrade - the places where bin/buildout is (re)generated - as though it were a dependency of zc.buildout. This is a hack to propagate libnetworkcache as a soft dependency.
-
Julien Muchembled authored
Like for URL that contain credentials, we still skip auth challenge because it's faster and: - we only support one auth scheme (basic) - netrc provides no way to specify realms, which seem anyway to be less and less used (https://stackoverflow.com/q/69303610 reports that recent browsers don't display them anymore) See merge request nexedi/slapos.buildout!25
-
Julien Muchembled authored
This retries with the alternate URL in case of HTTPError with the main one. Used by slapos.recipe.build:download* and slapos.recipe.cmmi recipes.
-
Julien Muchembled authored
- Py3: stop using legacy API of urllib.request and fix download of http(s) URLs containing user:passwd@ - Py2: avoid OOM when downloading huge files This is implemented as a method in case we want to make it configurable via [buildout].
-
Julien Muchembled authored
An optimization is to avoid temporary file when possible: a rename (or hard link) is not always possible (different mount points). Another one is to not check md5sum twice when using cache file. Fall-back mode is ignored if an MD5 checksum is given. In case of checksum mismatch for a cached path, remove it and download again, mainly to cover the following cases: - the url content changes and the user updates the checksum - buildout killed while downloading directly to cache (see above optimization) - shutil.copyfile is interrupted
-
Jérome Perrin authored
We want two identical sections at different URL to be able to produce same signature. This feature is useful for slapos.recipe.cmmi's shared parts. This commit may fixup "Support ${:_profile_base_location_}." but is purposefuly kept separate because it concerns parts signatures which are an orthogonal feature.
-
Kazuhiko Shiozaki authored
-
Kazuhiko Shiozaki authored
-
Xavier Thompson authored
-
Xavier Thompson authored
-
Xavier Thompson authored
When there is no pinned version for zc.buildout itself, buildout adds a ">=<current-version>" requirement to prevent accidental downgrading. If the current version has a local version label, this produced an invalid version specifier. To fix this, only the public part of the current version is used.
-
- 03 Jun, 2024 2 commits
-
-
Xavier Thompson authored
-
Xavier Thompson authored
Use a special .pydistutils.cfg in a temporary HOME directory for the duration of the pip wheel run to prevent build dependencies specified in a setup_requires from being installed on the fly without respecting pinned versions.
-
- 24 May, 2024 4 commits
-
-
Xavier Thompson authored
By default pip installs build dependencies (e.g. setuptools, poetry) in a temporary folder and temporarily adds it to sys.path in order to proceed to build the distribution. But we want all distributions to be installed with buildout and respect pinned versions, so we aim to prevent pip from installing build dependencies. Instead, we will install the build dependencies first and pass them explicitly to zc.recipe.egg via the setup-eggs option. This commit prevents pip from installing the build dependencies listed by the `build-system.requires` key in the pyproject.toml file. It may prevent pip from installing PEP 517 dynamic build dependencies or setuptools' setup_requires dependencies. See https://peps.python.org/pep-0517/#get-requires-for-build-wheel
-
Rafael Monnerat authored
While invoke setup.py certain eggs (like scikit-learn) launch cetain custom builds (for cython) using subprocess and sys.executable. This commit aims to preserve the sys.path over the runs, even if an egg is using subprocess with the same python to build a component of the egg.
-
Kazuhiko Shiozaki authored
-
Kazuhiko Shiozaki authored
Now specified patches are automatically applied on required eggs as well.
-
- 20 May, 2024 12 commits
-
-
Kazuhiko Shiozaki authored
- Support on the fly patches in zc.recipe.egg by ``EGGNAME-patches``, ``EGGNAME-patch-options``, ``EGGNAME-patch-binary`` (or ``patch-binary``) and ``EGGNAME-patch-revision`` options. - Support on the fly patches in zc.recipe.egg:custom by ``patches``, ``patch-options``, ``patch-binary`` and ``patch-revision`` options. (options ``EGGNAME-*`` are also supported as well).
-
Kirill Smelkov authored
Currently only zc.recipe.egg:custom supports setting environment variables, and zc.recipe.egg:develop does not. My motivation for allowing setting environment in :develop is wendelin.core https://lab.nexedi.cn/nexedi/slapos/blob/b5faab3b/component/wendelin.core/buildout.cfg There we have [wendelin.core] part which installs released egg from pypi, and [wendelin.core-dev] part which installs wendelin.core from its latest git version via zc.recipe.egg:develop . The problem is, wendelin.core for setup.py to work, needs git available, and with slapos we usually don't have git available on base system, so we build it by our own and do something like [wendelin.core-dev] recipe = zc.recipe.egg:develop environment = wendelin.core-dev-env [wendelin.core-dev-env] # wendelin.core-dev needs git to build PATH = ${git:location}/bin:%(PATH)s and the problem is environment does not currently work for zc.recipe.egg:develop, and thus git is not found -> build fails. ~~~~ In order to support environment in :develop, we just move environment setting/restoring bits from Custom to Base, and provide Base.install() which uses this bits. Custom & Develop .install() becomes ._install() which gets hooked into Base.install() . I've tested the patch only manually, because currently automated tests are broken in a lot of places for slapos.buildout and zc.recipe.egg . /cc @kazuhiko, @Tyagov
-
Kazuhiko Shiozaki authored
-
Xavier Thompson authored
Before this, sys.exit(1) was called to terminate the program directly.
-
Julien Muchembled authored
To be dropped once all buildout in the wild are able to upgrade to a version that supports new names in expression of conditional sections (see previous commit).
-
Julien Muchembled authored
Adding new names for expression is currently not possible because buildout aborts before it tries to upgrade (in-place or bootstrap).
-
Julien Muchembled authored
For example, existing values were not enough to distinguish 'arm-linux-gnueabi' from 'arm-linux-gnueabihf'. The 'multiarch' value is the output of $CC -dumpmachine where CC defaults to 'gcc'. See also https://wiki.debian.org/Multiarch/Tuples
-
Julien Muchembled authored
(changed option or missing path) Sometimes, most parts are reinstalled for a reason that the user didn't think about and it can take time to understand why. Explaining for all parts would be too verbose and useless because many are reinstalled just because their dependencies changed.
-
Julien Muchembled authored
-
Julien Muchembled authored
Egg is installed from wheel when the requested version ends with :whl
-
Thomas Gambier authored
Reuse more code from slapos.core to support case of parent directory not writable.
-
Jérome Perrin authored
When recipes mutate the options, we should not allow invalid syntax otherwise it gets written in .installed.cfg and generate invalid configparser syntax.
-