- 01 Feb, 2024 4 commits
-
-
Jérome Perrin authored
-
Jérome Perrin authored
These are already defined in stack/slapos.cfg
-
Jérome Perrin authored
jupyter-py2 used an old version not py3 compatible pygolang/test used the same version as in stack/slapos.cfg
-
Jérome Perrin authored
-
- 31 Jan, 2024 1 commit
-
-
Jérome Perrin authored
-
- 30 Jan, 2024 12 commits
-
-
Kirill Smelkov authoredDon't repeat slapparameter_dict['ncell_list'][k] - we can introduce a name for current neighbour cell, and use that name in the loop. And align entries to that they read more clearly. No non-whitespace changes in rendered enb.cfg and gnb.cfg . /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1526 /reviewed-by TrustMe
-
Kirill Smelkov authored
We currently have LTE-specific handover configuration in under cell_list and NR-specific handover configuration in under nr_cell_list. Those configuration are different. However in upcoming MultiRU we will need to handle LTE->NR handover, NR->LTE handover, and also Intra-ENB handover in addition to Inter-ENB handover we currently do. -> Move handover code into common function as a preparatory step for that. In the future the handover code for LTE and NR cells will be the same, so it makes sense to move that code to common place to avoid duplication. For rendered enb.cfg this unification introduces only space and trivial changes as shown in the appendix. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1528 /reviewed-by TrustMe Appendix. Diff for rendered enb.cfg and gnb.cfg before and after this patch ``` $ git diff -w --no-index config/{old,out} ``` ```diff diff --git a/config/old/enb.cfg b/config/out/enb.cfg index 43301ee13..9dcca16c7 100644 --- a/config/old/enb.cfg +++ b/config/out/enb.cfg @@ -45,16 +45,18 @@ root_sequence_index: 204, dl_earfcn: 36100, inactivity_timer: 10000, + // Handover ncell_list: [ // Inter-ENB HO { + rat: "eutra", n_id_cell: 35, dl_earfcn: 700, cell_id: 0x12345, tac: 123, - }], - + }, + ], // Carrier Aggregation scell_list: [ diff --git a/config/old/gnb.cfg b/config/out/gnb.cfg index 2127a2f6b..23b07d6e1 100644 --- a/config/old/gnb.cfg +++ b/config/out/gnb.cfg @@ -57,6 +57,7 @@ ssb_pos_bitmap: "10000000", inactivity_timer: 10000, + // Handover ncell_list: [ // Inter-ENB HO @@ -74,8 +75,8 @@ ssb_period: 20, ssb_offset: 0, ssb_duration: 1, - }], - + }, + ], // tune NR parameters for the cell manual_ref_signal_power: true, ```
-
Kirill Smelkov authored
Useful to have while doing handover-related changes. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1528 /reviewed-by TrustMe Appendix. Diff for rendered enb.cfg and gnb.cfg before and after this patch ``` $ git diff --no-index config/{old,out} ``` ```diff diff --git a/config/old/enb.cfg b/config/out/enb.cfg index 1843e0f24..43301ee13 100644 --- a/config/old/enb.cfg +++ b/config/out/enb.cfg @@ -45,6 +45,16 @@ root_sequence_index: 204, dl_earfcn: 36100, inactivity_timer: 10000, + // Handover + ncell_list: [ + // Inter-ENB HO + { + n_id_cell: 35, + dl_earfcn: 700, + cell_id: 0x12345, + tac: 123, + }], + // Carrier Aggregation scell_list: [ diff --git a/config/old/gnb.cfg b/config/out/gnb.cfg index d76b45d3c..2127a2f6b 100644 --- a/config/old/gnb.cfg +++ b/config/out/gnb.cfg @@ -57,6 +57,25 @@ ssb_pos_bitmap: "10000000", inactivity_timer: 10000, + // Handover + ncell_list: [ + // Inter-ENB HO + { + rat: "nr", + dl_nr_arfcn: 520000, + ssb_nr_arfcn: , + ul_nr_arfcn: 520000, + n_id_cell: 75, + gnb_id_bits: 22, + nr_cell_id: 0x77712, + tac: 321, + band: 38, + ssb_subcarrier_spacing: 30, + ssb_period: 20, + ssb_offset: 0, + ssb_duration: 1, + }], + ```
-
Kirill Smelkov authored
1. Currently we have separate log_options for LTE and NR cases with listing different subsystems in each. But in MultiRU one enb will be driving both LTE and NR cells at the same time, so we will need to define both LTE- and NR-related levels. -> Merge all log settings into one log_options as a preparatory step For current state it does not hurt for an LTE if we set e.g. ngap.level, and it does not hurt for NR if we set e.g. s1ap.level - since those layers will be unused. This way merging log settings for both LTE and NR subsystems is ok. -------- 2. Factorize log_phy_debug handling: instead of duplicating whole log_options line and changing only phy.level settings there, construct the log_options line programmatically and handle phy.level on its own. -------- 3. Use log/enb.log log_filename for both LTE and NR cases. In the upcoming MultiRU there might be several cells activated at the same time and in general it will be not possible to say are we doing "enb" or "gnb" now - for example if there will be two cells - one LTE and one NR. -> Use enb.log for log filename uniformly similarly to how the software is named (lteenb) even though it can work as both enb and gnb. For the reference we do the same with enb.xlog in nexedi/slapos!1522 . /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1527 /reviewed-by TrustMe Appendix. Diff for rendered enb.cfg and gnb.cfg before and after this patch ``` $ git diff --no-index config/{old,out} ``` ```diff diff --git a/config/old/enb.cfg b/config/out/enb.cfg index 467bb6364..1843e0f24 100644 --- a/config/old/enb.cfg +++ b/config/out/enb.cfg @@ -3,9 +3,7 @@ { - - log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", - + log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", log_filename: "log/enb.log", diff --git a/config/old/gnb.cfg b/config/out/gnb.cfg index 18523818a..d76b45d3c 100644 --- a/config/old/gnb.cfg +++ b/config/out/gnb.cfg @@ -3,10 +3,8 @@ { - - log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", - - log_filename: "log/gnb.log", + log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", + log_filename: "log/enb.log", rf_driver: { ```
-
Kirill Smelkov authored
Current enb config is already quite complex and with MultiRU it will be growing more - both with added features and with more sections emitted because there will be multiple radio units, multiple cells and cross cell interactions. So for clarity we will want to annotate with a comment to which cell or ru object a section belongs, or to which cell-cell pair a particular interaction belongs. Amarisoft supports C-style comments and preprocessor directives out of the box, but if we use them in the configuration files, yaml.load, that we use in the test to load generated configs, will break, because // and /* ... */ is not valid YAML. It looks like Amarisoft does preprocessing as a separate step before further loading given configuration via yaml. So to be able to use the comments and still have tests working we need to do the same - in the tests preprocess the files before feeding them to yaml loader. -> Do that with the help of https://pypi.org/project/pcpp/ In my view that library has good quality and in my experience it worked flawlessly. Anyway we need it to only handle comments, not sophisticated CPP features, and for that it works just ok. Add some comments to existing enb.cfg and ue.cfg to make sure it really works. Those are simple comments, and in current state it they might seem as not 100% necessary, but with more upcoming config changes it would be good to have those descriptionary anchors present in the generated configs, so I suggest we add them. Anyway they should not do any harm at all. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1526 /reviewed-by TrustMe
-
Kirill Smelkov authored
Currently on every test yaml.load issues a warning that using it without explicitly specifying loader is deprecated, for example: test_enb_conf (testTDD.TestENBParameters) .../slapos/software/ors-amarisoft/test/test.py:29: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. -> Fix the warning by using appropriate loader explicitly. Use FullLoader since msg.pyyaml.org/load describes it as Loads the full YAML language. Avoids arbitrary code execution. This is currently (PyYAML 5.1+) the default loader called by yaml.load(input) (after issuing the warning). i.e. we get support for full YAML feature set, do not get code execution and make sure that the behaviour stays exactly the same as before, but without the warning. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1526 /reviewed-by TrustMe -
Kirill Smelkov authored
We are going to do fixes and enhancements to YAML loading processes. Move corresponding code to one place before that as the preparatory step. Place new utility in new test/test.py file - with MultiRU that will be the place for tests of generic mode and test.jinja2.py, which will be renamed to test_ors.py, will be using utilities from there. So place the utility into new place from the start. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1526 /reviewed-by TrustMe
-
Kirill Smelkov authored
In MultiRU one enb will be driving multiple, possible of different kind, TDD/FDD and LTE/NR cells all at the same time, because that standard functionality of a base station and because original Amarisoft software supports that out of the box. However we currently have enb and gnb services separate and duplicating most of each other code. -> Merge instance-enb.jinja2.cfg and instance-gnb.jinja2.cfg as a preparatory step for MultiRU. - instance-enb.jinja2.cfg pulls gnb specific bits from instance-gnb.jinja2.cfg - instance-gnb.jinja2.cfg goes away effectively switching gnb to use ru/libinstance.jinja2.cfg like enb already does - For parameters that were duplicated as enb_<X> and gnb_<X> generic software now accepts only enb_<X> with ORS mode wrapper providing backward compatibility for gnb_* parameters. For example if gnb_config_link is given for a gnb instance, it will be translated to enb_config_link to underlying generic enb so that gnb_config_link works correctly. For ORS we care to provide 100% backward compatibility because there are many ORS'es deployed. For generic software we are free to clean things up as needed, because there is not much generic deployments at this time. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1522 /reviewed-by TrustMe -------- Appendix. Diff between instance-enb.jinja2.cfg and instance-gnb.jinja2.cfg before this patch ``` $ git diff --no-index instance-enb.jinja2.cfg instance-gnb.jinja2.cfg ``` ```diff diff --git a/instance-enb.jinja2.cfg b/instance-gnb.jinja2.cfg index 6d4ce7e94..6ee62b3ff 100644 --- a/instance-enb.jinja2.cfg +++ b/instance-gnb.jinja2.cfg @@ -1,19 +1,25 @@ {#- defaults for eNB radio parameters. NOTE they are installed temporary and will go away after switch to generic multiRU. #} {%- do RF.setdefault('tx_gain', slapparameter_dict.get('tx_gain', 0)) %} {%- do RF.setdefault('rx_gain', slapparameter_dict.get('rx_gain', 0)) %} -{%- do RF.setdefault('dl_earfcn', slapparameter_dict.get('dl_earfcn', 0)) %} +{%- do RF.setdefault('dl_nr_arfcn', slapparameter_dict.get('dl_nr_arfcn', 0)) %} +{%- do RF.setdefault('nr_band', slapparameter_dict.get('nr_band', 0)) %} [buildout] parts = directory - enb-config + gnb-config enb-service xamari-xlog-service {% if slapparameter_dict.get('xlog_fluentbit_forward_host') %} xlog-fluentbit-service {% endif %} + amarisoft-stats-service + amarisoft-rf-info-service + check-sdr-busy.py check-baseband-latency.py + check-amarisoft-stats-log.py + check-rx-saturated.py monitor-base publish-connection-information @@ -23,11 +29,6 @@ eggs-directory = {{ eggs_directory }} develop-eggs-directory = {{ develop_eggs_directory }} offline = true -{%- import 'slaplte.jinja2' as slaplte with context %} -{%- import 'ru_libinstance.jinja2.cfg' as rulib with context %} -{{ rulib.buildout() }} - - [monitor-httpd-conf-parameter] httpd-include-file = {{ buildout_directory }}/etc/httpd-include-file.conf port = ${monitor-instance-parameter:monitor-httpd-port} @@ -52,10 +53,11 @@ cert = {{ slap_connection['cert-file'] }} configuration.com_ws_port = 9001 configuration.com_addr = 127.0.1.2 -configuration.mme_addr = 127.0.1.100 +configuration.amf_addr = 127.0.1.100 configuration.gtp_addr = 127.0.1.1 -configuration.default_lte_bandwidth = {{ default_lte_bandwidth }} -configuration.default_lte_inactivity_timer = {{ default_lte_inactivity_timer }} +configuration.default_nr_bandwidth = {{ default_nr_bandwidth }} +configuration.default_nr_inactivity_timer = {{ default_nr_inactivity_timer }} +configuration.default_nr_ssb_pos_bitmap = {{ default_nr_ssb_pos_bitmap }} configuration.default_n_antenna_dl = {{ default_n_antenna_dl }} configuration.default_n_antenna_ul = {{ default_n_antenna_ul }} @@ -63,6 +65,7 @@ configuration.default_n_antenna_ul = {{ default_n_antenna_ul }} recipe = slapos.cookbook:mkdirectory software = {{ buildout_directory }} home = ${buildout:directory} +etc = ${:home}/etc var = ${:home}/var etc = ${:home}/etc bin = ${:home}/bin @@ -73,30 +76,32 @@ service = ${:etc}/service promise = ${:etc}/promise log = ${:var}/log -{% if slapparameter_dict.get("enb_config_link", None) %} -[enb-config-dl] +{% if slapparameter_dict.get("gnb_config_link", None) %} +[gnb-config-dl] recipe = slapos.recipe.build:download -url = {{ slapparameter_dict.get("enb_config_link") }} -version = {{ slapparameter_dict.get("enb_config_version") }} +url = {{ slapparameter_dict.get("gnb_config_link") }} +version = {{ slapparameter_dict.get("gnb_config_version") }} offline = false {% endif %} [enb-sh-wrapper] recipe = slapos.recipe.template output = ${directory:bin}/${:_buildout_section_name_} -enb-log = ${directory:log}/enb-output.log +gnb-log = ${directory:log}/gnb-output.log inline = #!/bin/sh {% if not slapparameter_dict.get("testing", False) %} sudo -n /opt/amarisoft/rm-tmp-lte; sudo -n /opt/amarisoft/init-sdr; sudo -n /opt/amarisoft/init-enb; - (echo && echo && date "+[%Y/%m/%d %T.%N %Z] Starting eNB software..." && echo) >> ${:enb-log}; - tail -c 1M ${:enb-log} > ${:enb-log}.tmp; - mv ${:enb-log}.tmp ${:enb-log}; - {{ enb }}/lteenb ${directory:etc}/enb.cfg >> ${:enb-log} 2>> ${:enb-log}; + (echo && echo && date "+[%Y/%m/%d %T.%N %Z] Starting gNB software..." && echo) >> ${:gnb-log}; + tail -c 1M ${:gnb-log} > ${:gnb-log}.tmp; + mv ${:gnb-log}.tmp ${:gnb-log}; + {{ enb }}/lteenb ${directory:etc}/gnb.cfg >> ${:gnb-log} 2>> ${:gnb-log}; + {% endif %} +### eNodeB (enb) [enb-service] recipe = slapos.cookbook:wrapper command-line = ${enb-sh-wrapper:output} @@ -105,7 +110,7 @@ mode = 0775 reserve-cpu = True pidfile = ${directory:run}/enb.pid hash-files = - ${enb-config:output} + ${gnb-config:output} ${enb-sh-wrapper:output} environment = LD_LIBRARY_PATH={{ openssl_location }}/lib @@ -114,22 +119,23 @@ environment = [xamari-xlog-script] recipe = slapos.recipe.template output = ${directory:bin}/${:_buildout_section_name_} -period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }} +period = {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} stats_logspec = stats[samples,rf]/${:period}s -{%- if slapparameter_dict.get("enb_drb_stats_enabled", True) %} +{%- if slapparameter_dict.get("gnb_drb_stats_enabled", True) %} drb_stats_logspec = x.drb_stats/${:period}s {%- else %} drb_stats_logspec = {%- endif %} rotatespec = 100MB.9 logspec = ${:stats_logspec} ${:drb_stats_logspec} -{%- if slapparameter_dict.get("websocket_password", "") %} +logspec = ${:stats_logspec} ${:drb_stats_logspec} +{% if slapparameter_dict.get("websocket_password", "") %} websock = ws://[${slap-configuration:ipv6-random}]:9001 -{%- else %} +{% else %} websock = ws://127.0.1.2:9001 -{%- endif %} +{% endif %} xamari = {{ buildout_directory }}/bin/xamari -logfile = ${monitor-directory:public}/enb.xlog +logfile = ${monitor-directory:public}/gnb.xlog inline = #!/bin/sh exec ${:xamari} xlog --rotate ${:rotatespec} ${:websock} ${:logfile} ${:logspec} @@ -177,6 +183,52 @@ wrapper-path = ${directory:service}/${:_buildout_section_name_} hash-files = ${:fluentbit-config} {% endif %} +[amarisoft-stats-template] +recipe = slapos.recipe.template:jinja2 +extensions = jinja2.ext.do +log-output = ${directory:var}/log/amarisoft-stats.json.log +context = + section directory directory + key slapparameter_dict slap-configuration:configuration + key log_file :log-output + raw stats_period {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} + raw testing {{ slapparameter_dict.get("testing", False) }} + raw python_path {{ buildout_directory}}/bin/pythonwitheggs +mode = 0775 +url = {{ ru_amarisoft_stats_template }} +output = ${directory:bin}/amarisoft-stats.py + +[amarisoft-rf-info-template] +recipe = slapos.recipe.template:jinja2 +extensions = jinja2.ext.do +log-output = ${directory:var}/log/amarisoft-rf-info.json.log +context = + section directory directory + key slapparameter_dict slap-configuration:configuration + key log_file :log-output + raw stats_period {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} + raw testing {{ slapparameter_dict.get("testing", False) }} + raw python_path {{ buildout_directory}}/bin/pythonwitheggs +mode = 0775 +url = {{ ru_amarisoft_rf_info_template }} +output = ${directory:bin}/amarisoft-rf-info.py + +[amarisoft-stats-service] +recipe = slapos.cookbook:wrapper +command-line = ${amarisoft-stats-template:output} +wrapper-path = ${directory:service}/amarisoft-stats +mode = 0775 +hash-files = + ${amarisoft-stats-template:output} + +[amarisoft-rf-info-service] +recipe = slapos.cookbook:wrapper +command-line = ${amarisoft-rf-info-template:output} +wrapper-path = ${directory:service}/amarisoft-rf-info +mode = 0775 +hash-files = + ${amarisoft-rf-info-template:output} + [config-base] recipe = slapos.recipe.template:jinja2 extensions = jinja2.ext.do @@ -190,53 +242,47 @@ context = raw gtp_addr_v4 {{ lan_ipv4 }} raw tx_gain {{ RF.tx_gain }} raw rx_gain {{ RF.rx_gain }} - raw earfcn {{ RF.dl_earfcn }} + raw nr_arfcn {{ RF.dl_nr_arfcn }} + raw nr_band {{ RF.nr_band }} raw software_name {{ software_name }} raw rf_mode {{ rf_mode }} raw trx {{ trx }} raw bbu {{ bbu }} raw ru_type {{ ru }} - json do_lte true - json do_nr false + json do_lte false + json do_nr true import netaddr netaddr ${:extra-context} -[sib-config] -<= config-base -url = {{ sib23_template }} -output = ${directory:etc}/sib23.cfg - [drb-config] <= config-base -url = {{ drb_lte_template }} +url = {{ drb_nr_template }} output = ${directory:etc}/drb.cfg -[enb-config] +[gnb-config] <= config-base -{% if slapparameter_dict.get("enb_config_link", None) %} -url = ${enb-config-dl:target} +{% if slapparameter_dict.get("gnb_config_link", None) %} +url = ${gnb-config-dl:target} {% else %} url = {{ enb_template }} {% endif %} -output = ${directory:etc}/enb.cfg +output = ${directory:etc}/gnb.cfg extra-context = import json_module json - json cell_list {{ rulib.cell_list | tojson }} - key sib23_file sib-config:output key drb_file drb-config:output import-list = rawfile slaplte.jinja2 {{ slaplte_template }} - [publish-connection-information] <= monitor-publish recipe = slapos.cookbook:publish.serialised {%- if slapparameter_dict.get("websocket_password", "") %} websocket_url = ws://[${slap-configuration:ipv6-random}]:9001 {%- endif %} -enb-ipv6 = ${slap-configuration:ipv6-random} -enb-ipv4 = {{ lan_ipv4 }} -current-earfcn = {{ RF.dl_earfcn }} +gnb-ipv6 = ${slap-configuration:ipv6-random} +gnb-ipv4 = {{ lan_ipv4 }} +current-nr-arfcn = {{ RF.dl_nr_arfcn }} +current-nr-band = {{ RF.nr_band }} amarisoft-version = {{ lte_version }} license-expiration = {{ lte_expiration }} monitor-gadget-url = ${:monitor-base-url}/gadget/software.cfg.html @@ -253,10 +299,35 @@ password = {{ slapparameter_dict['monitor-password'] | string }} <= monitor-promise-base name = ${:_buildout_section_name_} +[check-sdr-busy.py] +<= macro.promise +promise = check_sdr_busy +config-testing = {{ slapparameter_dict.get("testing", False) }} +config-sdr = {{ sdr }} +config-sdr_dev = 0 +config-dma_chan = 0 + [check-baseband-latency.py] <= macro.promise promise = check_baseband_latency config-testing = {{ slapparameter_dict.get("testing", False) }} -config-amarisoft-stats-log = ${ru_amarisoft-stats-template:log-output} -config-stats-period = {{ slapparameter_dict.get("enb_stats_fetch_period", 60) }} +config-amarisoft-stats-log = ${amarisoft-stats-template:log-output} +config-stats-period = {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} config-min-rxtx-delay = {{ slapparameter_dict.get("min_rxtx_delay", 0) }} + +[check-amarisoft-stats-log.py] +<= macro.promise +promise = check_amarisoft_stats_log +output = ${directory:plugins}/check-amarisoft-stats-log.py +config-testing = {{ slapparameter_dict.get("testing", False) }} +config-amarisoft-stats-log = ${amarisoft-stats-template:log-output} +config-stats-period = {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} + +[check-rx-saturated.py] +<= macro.promise +promise = check_rx_saturated +config-testing = {{ slapparameter_dict.get("testing", False) }} +config-rf-rx-chan-list = {{ list(range(0, int(slapparameter_dict.get('n_antenna_ul', default_n_antenna_ul)))) }} +config-amarisoft-stats-log = ${amarisoft-stats-template:log-output} +config-stats-period = {{ slapparameter_dict.get("gnb_stats_fetch_period", 60) }} +config-max-rx-sample-db = {{ slapparameter_dict.get("max_rx_sample_db", 0) }} ```
-
Kirill Smelkov authored
In MultiRU we are going to have generic software with flexible configuration and many features + ORS software, which wraps the generic part, adds ORS specific features, and translates simple ORS schema to generic ones. Let's first move ORS-specific bits to dedicated place as a preparatory step for that: - add software-ors.cfg . In the future software-ors.cfg will be the entry point for ORS mode, but for now it is only a place from where software-ors-* extend from. - add instance-ors.cfg . We move ORS-specific code from instance.cfg here and set it to use instance-ors-enb.jinja2.cfg when instantiating enb/gnb. - add instance-ors-enb.jinja2.cfg . This pulls ORS-specific code from instance-enb.jinja2.cfg + instance-gnb.jinja2.cfg and wraps them with ORS context built by instance-ors.cfg - in the templates the way to see whether it is ORS or not, and if yes, to access ORS parameters is changed: now it is always via checking `ors` object, which can be either False for non-ORS mode, or dict for ORS mode, and if it is dict the keys inside that dict are ORS specific properties, e.g. ors['one-watt']. This adjustment is handy to organize ORS mode extension from generic with generic setting `json ors false` in the context, and ORS mode undoing that and setting ORS context properly. I think the code also reads more clear this way, i.e. with {%- if one_watt == "True" %} changed to {%- if ors['one-watt'] %} because in the second variant it is clear that one-watt is a property of ORS. The rendered configs for enb.cfg and gnb.cfg stay unchanged. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on !1522 /reviewed-by TrustMe -
Kirill Smelkov authored
We use computer identifier in fluentd forwarding. This identifier was named as ors-id, but it applies not only to ORS, but also to generic deployment with BBU. In the next patch we are going to introduce ORS mode and move ORS-specific bits to software-ors.cfg and instance-ors.cfg + co. The computer identifier will stay in generic part, because it is generic. -> To avoid ambiguity rename it to be clearly unrelated to ORS specifics. /cc @jhuge, @lu.xu, @tomo, @xavier_thompson, @Daetalus /proposed-for-review-on nexedi/slapos!1522 /reviewed-by TrustMe
-
Kirill Smelkov authored
When there are multiple cells and CA configured, without those parameters enb fails to start with e.g. n1_pucch_an_cs_count must be > 0 for the CA Primary cell Set them on all cell like illustrated in enb-2cc.cfg and enb-3cc.cfg Amarisoft examples. Not sure selected values are best - I took them from above mentioned examples as is. Reference to documentation about those parameters: https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.n1_pucch_an_cs_count https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.n3_pucch_an_n_rb https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.ack_nack_feedback_mode_ca /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /helped-by @jhuge /reviewed-on nexedi/slapos!1519 -
Jérome Perrin authored
-
- 26 Jan, 2024 3 commits
-
-
Alain Takoudjou authored
See merge request !1524
-
Alain Takoudjou authored
-
Alain Takoudjou authored
-
- 25 Jan, 2024 7 commits
-
-
Ivan Tyagov authoredSee merge request !1525
-
Ivan Tyagov authored
Fix double trailing "/". Add sane defaults.
-
Alain Takoudjou authored
-
Kirill Smelkov authored
software/ors-amarisoft: Merge instance-ue-lte.jinja2.cfg + instance-ue-nr.jinja2.cfg -> into instance-ue.jinja2.cfg This is preparatory step for MultiRU and removes code duplication. Mostly straightforward, but there is one backward incompatible change: instead of ue_lte_config_link and ue_nr_config_link there is now only one ue_config_link parameter. We talked with Lu some time ago and my understanding is that UEsim is not widely used. This way I think it is better to clarify things instead of putting backward compatibility effort for nothing. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1523 -------- Appendix. Diff between instance-ue-lte.jinja2.cfg and instance-ue-nr.jinja2.cfg before this patch ``` $ git diff --no-index instance-ue-lte.jinja2.cfg instance-ue-nr.jinja2.cfg ``` ```diff diff --git a/instance-ue-lte.jinja2.cfg b/instance-ue-nr.jinja2.cfg index 4d4a2e329..8fd238bfb 100644 --- a/instance-ue-lte.jinja2.cfg +++ b/instance-ue-nr.jinja2.cfg @@ -1,7 +1,7 @@ [buildout] parts = directory - lte-ue-lte-config + lte-ue-nr-config lte-ue-service check-sdr-busy.py monitor-base @@ -35,11 +35,11 @@ url = {{ slap_connection['server-url'] }} key = {{ slap_connection['key-file'] }} cert = {{ slap_connection['cert-file'] }} -configuration.default_lte_bandwidth = {{ default_lte_bandwidth }} +configuration.default_nr_bandwidth = {{ default_nr_bandwidth }} configuration.default_n_antenna_dl = {{ default_n_antenna_dl }} configuration.default_n_antenna_ul = {{ default_n_antenna_ul }} -configuration.default_lte_imsi = {{ default_lte_imsi }} -configuration.default_lte_k = {{default_lte_k}} +configuration.default_nr_imsi = {{ default_nr_imsi }} +configuration.default_nr_k = {{ default_nr_k }} [directory] recipe = slapos.cookbook:mkdirectory @@ -56,11 +56,11 @@ service = ${:etc}/service promise = ${:etc}/promise log = ${:var}/log -{% if slapparameter_dict.get("ue_lte_config_link", None) %} -[ue-lte-config-dl] +{% if slapparameter_dict.get("ue_nr_config_link", None) %} +[ue-nr-config-dl] recipe = slapos.recipe.build:download -url = {{ slapparameter_dict.get("ue_lte_config_link") }} -version = {{ slapparameter_dict.get("ue_lte_config_version") }} +url = {{ slapparameter_dict.get("ue_nr_config_link") }} +version = {{ slapparameter_dict.get("ue_nr_config_version") }} offline = false {% endif %} @@ -87,7 +87,7 @@ mode = 0775 reserve-cpu = True pidfile = ${directory:run}/ue.pid hash-files = - ${lte-ue-lte-config:output} + ${lte-ue-nr-config:output} ${lte-ue-sh-wrapper:output} environment = LD_LIBRARY_PATH={{ openssl_location }}/lib @@ -101,18 +101,19 @@ context = section slap_configuration slap-configuration section pub_info publish-connection-information key slapparameter_dict slap-configuration:configuration - json do_lte true - json do_nr false + json do_lte false + json do_nr true -[lte-ue-lte-config] +[lte-ue-nr-config] <= config-base -{% if slapparameter_dict.get("ue_lte_config_link", None) %} -url = ${ue-lte-config-dl:target} +{% if slapparameter_dict.get("ue_nr_config_link", None) %} +url = ${ue-nr-config-dl:target} {% else %} url = {{ ue_template }} {% endif %} output = ${directory:etc}/ue.cfg + [publish-connection-information] <= monitor-publish recipe = slapos.cookbook:publish.serialised ```
-
Kirill Smelkov authored
As Amarisoft documentation says in UEsim LTE bandwidth is defined in MHz, nor in RB: https://tech-academy.amarisoft.com/lteue.doc#prop.bandwidth I checked the history and it was like this since 2015-10-28 release. -> Fix emitted bandwidth for LTE cell. Diff for rendered ue-lte.cfg: ``` $ git diff --no-index config/{old,out} ``` ```diff --- a/config/old/ue-lte.cfg +++ b/config/out/ue-lte.cfg @@ -1,5 +1,4 @@ -#define N_RB_DL 50 { log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", @@ -20,7 +19,7 @@ rf_driver: { multi_ue: true, cells: [ { - bandwidth: N_RB_DL, + bandwidth: 10, dl_earfcn: 0, n_antenna_dl: 2, n_antenna_ul: 2, ``` By coincidence this removes last usage of C Preprocessor from ue.jinja2.cfg and, similarly to enb.jinja2.cfg, makes it to be Jinja2-only. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1521 -
Kirill Smelkov authored
To support multiple Radio Units and multiple cells, we will need to loop over them and emit corresponding configuration parts taking RU/Cell parameters into account for each part. We currently handle some such parameters at Jinja2 level (e.g. dl_earfcn), while some other parameters at CPP level (e.g. cell bandwidth) and rely on enb to preprocess generated enb.cfg with CPP on its own. While CPP works ok for simple 1RU-1CELL cases, and CPP is also the tool that Amarisoft itself uses in its examples, it has the limitation that it cannot cooperate with loops. In other words there can be only one global N_RB_DL #define, and it cannot be different for different cells while we are looping over them at Jinja2 level. That means that we cannot use CPP to handle multiple cells. For this reason switch enb.jinja2.cfg to be using Jinja2 only without CPP. While rendered enb.cfg/gnb.cfg change, we can see that they change in expected way, with leaving only blocks that should be active for input parameters. See the Appendix for details. The switch is straightforward but one thing deserves to be mentioned: due to limitation of Jinja2, where macros can return only strings, we use JSON encoding to be able to return arbitrary types - integers, floats, dicts, etc, and use a convention to name such macros with j prefix and wrap their usage with J so that whole invocation does not add much noise. See added slaplte.J documentation for details. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on !1520 -------- Appendix. Diff for rendered enb.cfg/gnb.cfg before and after this patch ``` $ git diff --no-index config/{old,out} ``` ```diff diff --git a/config/old/enb.cfg b/config/out/enb.cfg index 23e56c9a9..ee2661640 100644 --- a/config/old/enb.cfg +++ b/config/out/enb.cfg @@ -1,14 +1,6 @@ -#define TDD 1 - -#define N_RB_DL 50 - -#define N_ANTENNA_DL 2 - -#define N_ANTENNA_UL 2 - { @@ -44,8 +36,8 @@ cell_list: [ { rf_port: 0, - n_antenna_dl: N_ANTENNA_DL, - n_antenna_ul: N_ANTENNA_UL, + n_antenna_dl: 2, + n_antenna_ul: 2, cell_id: 0x00, tac: 0x0001, @@ -59,83 +51,33 @@ manual_ref_signal_power: true, - -#if TDD == 1 uldl_config: 6, sp_config: 7, -#endif - - n_rb_dl: N_RB_DL, -#if N_RB_DL == 6 - si_coderate: 0.30, -#else - si_coderate: 0.20, -#endif + n_rb_dl: 50, + si_coderate: 0.2, pdsch_dedicated: { -#if N_ANTENNA_DL == 4 - p_a: -6, -#elif N_ANTENNA_DL == 2 p_a: -3, -#else - p_a: 0, -#endif p_b: -1, }, -#if N_RB_DL == 6 - pdcch_format: 1, -#else - pdcch_format: 2, -#endif - -#if N_RB_DL == 6 - prach_config_index: 15, -#else + pdcch_format: 2, prach_config_index: 4, -#endif - -#if N_RB_DL == 6 - initial_cqi: 5, -#else - initial_cqi: 3, -#endif + initial_cqi: 3, pucch_dedicated: { n1_pucch_sr_count: 11, cqi_pucch_n_rb: 1, n1_pucch_an_cs_count: 8, n3_pucch_an_n_rb: 3, -#if TDD == 1 tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */ -#endif }, - -#if N_ANTENNA_DL >= 2 m_ri: 8, transmission_mode: 3, -#endif srs_dedicated: { -#if N_RB_DL == 6 - srs_bandwidth_config: 7, - srs_bandwidth: 1, -#elif N_RB_DL == 15 - srs_bandwidth_config: 6, - srs_bandwidth: 1, -#elif N_RB_DL == 25 - srs_bandwidth_config: 3, - srs_bandwidth: 1, -#elif N_RB_DL == 50 srs_bandwidth_config: 2, srs_bandwidth: 2, -#elif N_RB_DL == 75 - srs_bandwidth_config: 2, - srs_bandwidth: 2, -#else - srs_bandwidth_config: 2, - srs_bandwidth: 3, -#endif srs_subframe_config: 3, srs_period: 40, srs_hopping_bandwidth: 0, diff --git a/config/old/gnb.cfg b/config/out/gnb.cfg index 5bfd3bb01..0b6a1445c 100644 --- a/config/old/gnb.cfg +++ b/config/out/gnb.cfg @@ -1,13 +1,6 @@ -#define TDD 1 - - -#define N_ANTENNA_DL 2 - -#define N_ANTENNA_UL 2 - { @@ -50,8 +43,8 @@ nr_cell_list: [ { rf_port: 0, - n_antenna_dl: N_ANTENNA_DL, - n_antenna_ul: N_ANTENNA_UL, + n_antenna_dl: 2, + n_antenna_ul: 2, cell_id: 0x01, n_id_cell: 500, @@ -108,29 +101,10 @@ csi_rs: { nzp_csi_rs_resource: [ { -#if N_ANTENNA_DL == 1 - n_ports: 1, - frequency_domain_allocation: "row2", - bitmap: "100000000000", - cdm_type: "no_cdm", -#elif N_ANTENNA_DL == 2 n_ports: 2, frequency_domain_allocation: "other", bitmap: "100000", cdm_type: "fd_cdm2", -#elif N_ANTENNA_DL == 4 - n_ports: 4, - frequency_domain_allocation: "row4", - bitmap: "100", - cdm_type: "fd_cdm2", -#elif N_ANTENNA_DL == 8 - n_ports: 8, - frequency_domain_allocation: "other", - bitmap: "110011", - cdm_type: "fd_cdm2", -#else -#error unsupported number of DL antennas -#endif }, ], @@ -148,22 +122,10 @@ csi_report_config: [ { -#if N_ANTENNA_DL > 1 codebook_config: { codebook_type: "type1", sub_type: "typeI_SinglePanel", -#if N_ANTENNA_DL == 2 -#elif N_ANTENNA_DL == 4 - n1: 2, - n2: 1, - codebook_mode: 1, -#elif N_ANTENNA_DL == 8 - n1: 4, - n2: 1, - codebook_mode: 1, -#endif }, -#endif }, ], }, ```
-
Kirill Smelkov authored
In the next patch we will switch usage of C Preprocessor to Jinja2, and in jinja2 doing set from under if, as e.g. in {%- if ru == 'm2ru' %} {%- set n_antenna_ul = 1 %} {%- endif %} does _not_ have the effect of setting n_antenna_ul=1 outside of the if block. That, however, can be worked around with usage of namespace objects, so the following works as intended: {%- set x = namespace() %} {%- if ru == 'm2ru' %} {%- set x.n_antenna_ul = 1 %} {%- endif %} with x.n_antenna_ul=1 if ru was m2ru. So taking into account this, and that in MultiRU ru will be denoting RadioUnit-related configuration, let's switch ru to be a namespace object with ru.ru_type denoting type of attached radio unit. This both goes as a preparatory step for MultiRU and also allows to switch from CPP to Jinja2 in the next patch. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on !1520
-
- 24 Jan, 2024 5 commits
-
-
Jérome Perrin authored
-
Jérome Perrin authored
When running resilience tests we have too deep paths: time="2024-01-24T01:32:14+01:00" level=fatal msg="load config" config_path=/srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/etc/gitaly-config.toml error="socket could not be created in /srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/var/gitaly/sockets/internal: listen unix /srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/var/gitaly/sockets/internal/test-0c5c65ff.sock: bind: invalid argument" -
Jérome Perrin authored
and stop using old version in gitlab
-
Jérome Perrin authored
-
Jérome Perrin authored
-
- 23 Jan, 2024 8 commits
-
-
Titouan Soulard authored -
Kirill Smelkov authored
software/ors-amarisoft: enb.jinja2.cfg: nr: Move tunable parameters from nr_cell_default to nr_cell_list This patch is similar and has the same rationale as the previous patch (software/ors-amarisoft: enb.jinja2.cfg: lte: Move tunable parameters from cell_default to cell_list). Please see its description for context and details. Like with previous patch I've made sure via json_util that effective gnb configuration stays exactly the same. Also, since for NR case we move more code, and also use enb merging feature(*) I tested that the effective gnb configuration stays exactly the same with both * tdd_config = 3 (5ms 8UL 1DL 2/10 (maximum uplink)), and * tdd_config = 1 (5ms 2UL 7DL 4/6 (default)) In all the cases effective gnb configuration stayed exactly the same before and after this patch which proves that effective configuration for single cell case remains unchanged. (*) enb implements merging process for cell/cell_default and nr_cell/nr_cell_default as demonstrated below: cell={a: 10, d:15} cell_default={a:1, b:2, c:3} -> cell={a:10, b:2, c: 3, d: 15} cell={x: [{}, 2]} cell_default={x: [{a:1}]} -> cell={x: [{a:1}, 2]} cell={x: [{c:11}]} cell_default={x: [{a:1}, {b:2}] -> cell={x: [{a:1, c:11}, {b:2}]} /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on !1515 -
Kirill Smelkov authored
Currently we set some cell tunable parameters on the cell object itself (e.g. dl_earfcn), while other cell tunable parameters on the cell_default object, e.g. cell bandwidth. This works ok when there is only one cell, but with multiple cells it makes a problem because different cells can have e.g. different bandwidth. So as preparatory step for MultiRU move the code, that sets tunable parameters for lte cells, from cell_default to cell object itself. Rendered config changes but we can verify that the configuration, that enb actually uses, stays the same: When enb starts it builds internal configuration for all configured cell objects by merging cell_default + cell's explicit configuration and using the result as the actual configuration for the cell. There is no more cell_default in that actual configuration. And also enb emits that actual runtime configuration in the beginning of enb.log which we can extract and investigate(*) So this way we can run enb with old and new generated enb.cfg and then compare the actual configuration. It turns out to be empty: ~/enb# ./lteenb -n x/old/enb.cfg ... RF0: sample_rate=11.520 MHz dl_freq=1910.000 MHz ul_freq=1910.000 MHz (band 33) dl_ant=2 ul_ant=2 (enb) quit ~/enb# mv log/enb.log log/enb.log.old ~/enb# ./lteenb -n x/out/enb.cfg ... RF0: sample_rate=11.520 MHz dl_freq=1910.000 MHz ul_freq=1910.000 MHz (band 33) dl_ant=2 ul_ant=2 (enb) quit ~/enb# mv log/enb.log log/enb.log.new ~/enb# ../ots/json_util log log/enb.log.old >a ~/enb# ../ots/json_util log log/enb.log.new >b ~/enb# diff -u a b # output is empty which means that effective enb configuration before and after this patch is exactly the same. For the reference, how internal configuration looks like is provided in the appendix. (*) see https://tech-academy.amarisoft.com/ExtractConfigFromLog.html for details. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1515 P.S. for now I do not plan to expose full measurement configuration in the generic MultiRU and so it stays in cell_default with corresponding TODO. -------- Appendix. Dump of internal enb configuration for enb.cfg before and after the patch ``` $ ../ots/json_util log log/enb.log.old ``` ```json { "cell_list": [ { "cell_barred": false, "cell_id": 0, "cipher_algo_pref": [], "cqi_period": 40, "cyclic_prefix": "normal", "dl_256qam": true, "dl_earfcn": 36100, "dpc": true, "dpc_pucch_snr_target": 25, "dpc_pusch_snr_target": 25, "drb_config": [ ... ], # removed for brevity "ho_from_meas": true, "inactivity_timer": 10000, "initial_cqi": 3, "integ_algo_pref": [2, 1], "intra_freq_reselection": true, "m_ri": 8, "mac_config": { "dl_max_harq_tx": 5, "ul_max_harq_tx": 5 }, "manual_ref_signal_power": true, "meas_config_desc": { "a1_hysteresis": 0, "a1_report_type": "rsrp", "a1_rsrp": -70, "a1_time_to_trigger": 640, "a2_hysteresis": 0, "a2_report_type": "rsrp", "a2_rsrp": -80, "a2_time_to_trigger": 640, "a3_hysteresis": 0, "a3_offset": 6, "a3_report_type": "rsrp", "a3_time_to_trigger": 480 }, "meas_gap_config": "gp0", "n_antenna_dl": 2, "n_antenna_ul": 2, "n_id_cell": 0, "n_rb_dl": 50, "n_symb_cch": 0, "pdcch_format": 2, "pdsch_dedicated": { "p_a": -3, "p_b": -1 }, "phich_duration": "normal", "phich_resource": "1", "plmn_list": ["00101"], "prach_config_index": 4, "prach_freq_offset": -1, "pucch_dedicated": { "cqi_pucch_n_rb": 1, "n1_pucch_sr_count": 11, "tdd_ack_nack_feedback_mode": "multiplexing" }, "pusch_dedicated": { "beta_offset_ack_index": 9, "beta_offset_cqi_index": 6, "beta_offset_ri_index": 6 }, "pusch_hopping_offset": -1, "pusch_max_its": 6, "pusch_msg3_mcs": 0, "q_rx_lev_min": -70, "rf_port": 0, "root_sequence_index": 204, "scell_list": [], "si_coderate": 0.2, "si_pdcch_format": 2, "si_value_tag": 0, "si_window_length": 40, "sib_sched_list": [ ... ], # remove for brevity "sp_config": 7, "sr_period": 20, "srb_config": [ { "id": 1, "maxRetxThreshold": 32, "t_PollRetransmit": 60, "t_Reordering": 45 }, { "id": 2, "maxRetxThreshold": 32, "t_PollRetransmit": 60, "t_Reordering": 45 } ], "srs_dedicated": { "srs_bandwidth": 2, "srs_bandwidth_config": 2, "srs_hopping_bandwidth": 0, "srs_period": 40, "srs_subframe_config": 3 }, "tac": 1, "transmission_mode": 3, "ul_64qam": true, "uldl_config": 6 } ], "com_addr": "127.0.1.2:9001", "enb_id": 107216, "gtp_addr": "127.0.1.1", "log_filename": "log/enb.log", "log_options": "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", "mme_list": [ { "mme_addr": "127.0.1.100" } ], "rf_driver": { "args": "dev0=/dev/sdr0", "name": "sdr", "realtime": 1, "rx_antenna": "tx_rx", "tdd_tx_mod": 1 }, "rx_gain": 43, "tx_gain": 62 } ``` -
Kirill Smelkov authored
So that it is possible to try running enb on generated configs becuase with previous numbers enb refuses to start: ~/enb# ./lteenb x/old/enb.cfg ... x/old/enb.cfg:50: field 'dl_earfcn': range is [0:262143] (LTE Cell #0) ~/enb# ./lteenb x/old/gnb.cfg ... x/old/gnb.cfg:54: invalid frequency band (NR Cell #1) We need enb to be able to start with generated config because enb dumps in its enb.log the real configuration that it builds from cell_list + cell_default and nr_cell_list + cell_default - which is possible to extract via `json_util` and which we want to check after our changes to enb.jinja2.cfg to see if we really don't introduce semantic mistakes when e.g. moving things in between cell_default to cell_list (see next patch). With new frequencies enb and gnb both start ok. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1515 -
Kirill Smelkov authored
For example there is no slaptap under StandaloneSlapOS and <RU>-netconf-socket promise needs real RU hardware to be around and accepting incoming connections. If we don't wrap such things with `if not testing` running test on testnodes will fail. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1514
-
Kirill Smelkov authored
Less need to keep default synchronized and less noise in the code. We will need to refer to `testing` more in the next patch, so it will help a bit. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1514
-
Kirill Smelkov authored
Similarly to f365a440 (software/ors-amarisoft: Merge gnb.jinja2.cfg into enb.jinja2.cfg) merge LTE and NR configuration files for UEsim into single config as the preparation for MultiRU - there UEsim will be also handling TDD, FDD, LTE and NR cells and UEs all at the same time. In this patch for now we only move code without changing it and wrap parts with `if do_lte` and `if do_nr` correspondingly. The end result of rendered ue-lte.cfg and ue-nr.cfg stays practically the same as shown in the appendix. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1513 -------- Appendix. Diff for rendered ue-*.cfg before and after this patch. ``` $ ./pythonwitheggs slapos-render-config.py && git diff --no-index -w config/old/ config/out/ ``` ```diff diff --git a/config/old/ue-lte.cfg b/config/out/ue-lte.cfg index 7f1530daf..836a95e79 100644 --- a/config/old/ue-lte.cfg +++ b/config/out/ue-lte.cfg @@ -1,5 +1,6 @@ #define N_RB_DL 50 + { log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", log_filename: "log/ue.log", @@ -14,7 +15,8 @@ rf_driver: { }, tx_gain: 60, rx_gain: 40, - cell_groups: [{ + cell_groups: [ + { multi_ue: true, cells: [ { @@ -27,7 +29,8 @@ rf_driver: { ], pdcch_decode_opt: false, pdcch_decode_opt_threshold: 0.1, - }], + }, + ], ue_list: [ { sim_algo: "milenage", @@ -38,8 +41,8 @@ rf_driver: { impi: "", imsi: "001010123456789", K: "00112233445566778899aabbccddeeff", - rue_addr: "host1", ue_category: 12, + rue_addr: "host1", tun_setup_script: "ue-ifup", apn: "internet", } diff --git a/config/old/ue-nr.cfg b/config/out/ue-nr.cfg index 41758ab6f..631e1ab1e 100644 --- a/config/old/ue-nr.cfg +++ b/config/out/ue-nr.cfg @@ -1,3 +1,5 @@ + + { log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null", log_filename: "log/ue.log", @@ -12,7 +14,8 @@ rf_driver: { }, tx_gain: 60, rx_gain: 40, - cell_groups: [{ + cell_groups: [ + { group_type: "nr", multi_ue: false, cells: [{ @@ -26,7 +29,8 @@ rf_driver: { n_antenna_ul: 2, } ], - }], + }, + ], ue_list: [ { sim_algo: "milenage", @@ -37,11 +41,11 @@ rf_driver: { impi: "", imsi: "001010123456789", K: "00112233445566778899aabbccddeeff", - rue_addr: "host2", as_release: 15, ue_category: "nr", + rue_addr: "host2", tun_setup_script: "ue-ifup", apn: "internet", } - ] + ], } ```
-
Kirill Smelkov authored
This is useful during development while working on ue-*.jinja2.cfg /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1513
-
