In the next patch we will switch usage of C Preprocessor to Jinja2, and in jinja2 doing set from under if, as e.g. in

    {%- if ru == 'm2ru' %}
    {%-   set n_antenna_ul = 1  %}
    {%- endif %}

does _not_ have the effect of setting n_antenna_ul=1 outside of the if block.

That, however, can be worked around with usage of namespace objects, so the following works as intended:

    {%- set x = namespace() %}
    {%- if ru == 'm2ru' %}
    {%-   set x.n_antenna_ul = 1  %}
    {%- endif %}

with x.n_antenna_ul=1 if ru was m2ru.

So taking into account this, and that in MultiRU ru will be denoting
RadioUnit-related configuration, let's switch ru to be a namespace object with
ru.ru_type denoting type of attached radio unit.

This both goes as a preparatory step for MultiRU and also allows to switch from
CPP to Jinja2 in the next patch.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on !1520

When running resilience tests we have too deep paths:

    time="2024-01-24T01:32:14+01:00" level=fatal msg="load config" config_path=/srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/etc/gitaly-config.toml error="socket could not be created in /srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/var/gitaly/sockets/internal: listen unix /srv/slapgrid/slappart22/t/eeq/i/0/tmp/inst/T2/srv/runner/instance/slappart0/var/gitaly/sockets/internal/test-0c5c65ff.sock: bind: invalid argument"

and stop using old version in gitlab

software/ors-amarisoft: enb.jinja2.cfg: nr: Move tunable parameters from nr_cell_default to nr_cell_list

This patch is similar and has the same rationale as the previous patch
(software/ors-amarisoft: enb.jinja2.cfg: lte: Move tunable parameters
from cell_default to cell_list). Please see its description for context
and details.

Like with previous patch I've made sure via json_util that effective gnb
configuration stays exactly the same. Also, since for NR case we move
more code, and also use enb merging feature(*) I tested that the
effective gnb configuration stays exactly the same with both

  * tdd_config = 3  (5ms 8UL 1DL 2/10 (maximum uplink)),	and
  * tdd_config = 1  (5ms 2UL 7DL 4/6 (default))

In all the cases effective gnb configuration stayed exactly the same
before and after this patch which proves that effective configuration
for single cell case remains unchanged.

(*) enb implements merging process for cell/cell_default and
nr_cell/nr_cell_default as demonstrated below:

  cell={a: 10, d:15}  cell_default={a:1, b:2, c:3}       ->  cell={a:10, b:2, c: 3, d: 15}
  cell={x: [{}, 2]}   cell_default={x: [{a:1}]}          ->  cell={x: [{a:1}, 2]}
  cell={x: [{c:11}]}  cell_default={x: [{a:1}, {b:2}]    ->  cell={x: [{a:1, c:11}, {b:2}]}

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on !1515

Currently we set some cell tunable parameters on the cell object itself
(e.g. dl_earfcn), while other cell tunable parameters on the
cell_default object, e.g. cell bandwidth. This works ok when there is
only one cell, but with multiple cells it makes a problem because
different cells can have e.g. different bandwidth.

So as preparatory step for MultiRU move the code, that sets tunable
parameters for lte cells, from cell_default to cell object itself.

Rendered config changes but we can verify that the configuration, that
enb actually uses, stays the same: When enb starts it builds internal
configuration for all configured cell objects by merging cell_default +
cell's explicit configuration and using the result as the actual
configuration for the cell. There is no more cell_default in that actual
configuration. And also enb emits that actual runtime configuration in
the beginning of enb.log which we can extract and investigate(*)

So this way we can run enb with old and new generated enb.cfg and then
compare the actual configuration. It turns out to be empty:

    ~/enb# ./lteenb -n x/old/enb.cfg
    ...
    RF0: sample_rate=11.520 MHz dl_freq=1910.000 MHz ul_freq=1910.000 MHz (band 33) dl_ant=2 ul_ant=2
    (enb) quit
    ~/enb# mv log/enb.log log/enb.log.old

    ~/enb# ./lteenb -n x/out/enb.cfg
    ...
    RF0: sample_rate=11.520 MHz dl_freq=1910.000 MHz ul_freq=1910.000 MHz (band 33) dl_ant=2 ul_ant=2
    (enb) quit
    ~/enb# mv log/enb.log log/enb.log.new

    ~/enb# ../ots/json_util log log/enb.log.old >a
    ~/enb# ../ots/json_util log log/enb.log.new >b
    ~/enb# diff -u a b  # output is empty

which means that effective enb configuration before and after this patch is exactly the same.

For the reference, how internal configuration looks like is provided in the appendix.

(*) see https://tech-academy.amarisoft.com/ExtractConfigFromLog.html for details.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1515

P.S. for now I do not plan to expose full measurement configuration in
     the generic MultiRU and so it stays in cell_default with corresponding TODO.

--------

Appendix. Dump of internal enb configuration for enb.cfg before and after the patch

```
$ ../ots/json_util log log/enb.log.old
```

```json
{
    "cell_list": [
        {
            "cell_barred": false,
            "cell_id": 0,
            "cipher_algo_pref": [],
            "cqi_period": 40,
            "cyclic_prefix": "normal",
            "dl_256qam": true,
            "dl_earfcn": 36100,
            "dpc": true,
            "dpc_pucch_snr_target": 25,
            "dpc_pusch_snr_target": 25,
            "drb_config": [ ... ],		# removed for brevity
            "ho_from_meas": true,
            "inactivity_timer": 10000,
            "initial_cqi": 3,
            "integ_algo_pref": [2, 1],
            "intra_freq_reselection": true,
            "m_ri": 8,
            "mac_config": {
                "dl_max_harq_tx": 5,
                "ul_max_harq_tx": 5
            },
            "manual_ref_signal_power": true,
            "meas_config_desc": {
                "a1_hysteresis": 0,
                "a1_report_type": "rsrp",
                "a1_rsrp": -70,
                "a1_time_to_trigger": 640,
                "a2_hysteresis": 0,
                "a2_report_type": "rsrp",
                "a2_rsrp": -80,
                "a2_time_to_trigger": 640,
                "a3_hysteresis": 0,
                "a3_offset": 6,
                "a3_report_type": "rsrp",
                "a3_time_to_trigger": 480
            },
            "meas_gap_config": "gp0",
            "n_antenna_dl": 2,
            "n_antenna_ul": 2,
            "n_id_cell": 0,
            "n_rb_dl": 50,
            "n_symb_cch": 0,
            "pdcch_format": 2,
            "pdsch_dedicated": {
                "p_a": -3,
                "p_b": -1
            },
            "phich_duration": "normal",
            "phich_resource": "1",
            "plmn_list": ["00101"],
            "prach_config_index": 4,
            "prach_freq_offset": -1,
            "pucch_dedicated": {
                "cqi_pucch_n_rb": 1,
                "n1_pucch_sr_count": 11,
                "tdd_ack_nack_feedback_mode": "multiplexing"
            },
            "pusch_dedicated": {
                "beta_offset_ack_index": 9,
                "beta_offset_cqi_index": 6,
                "beta_offset_ri_index": 6
            },
            "pusch_hopping_offset": -1,
            "pusch_max_its": 6,
            "pusch_msg3_mcs": 0,
            "q_rx_lev_min": -70,
            "rf_port": 0,
            "root_sequence_index": 204,
            "scell_list": [],
            "si_coderate": 0.2,
            "si_pdcch_format": 2,
            "si_value_tag": 0,
            "si_window_length": 40,
            "sib_sched_list": [ ... ],		# remove for brevity
            "sp_config": 7,
            "sr_period": 20,
            "srb_config": [
                {
                    "id": 1,
                    "maxRetxThreshold": 32,
                    "t_PollRetransmit": 60,
                    "t_Reordering": 45
                },
                {
                    "id": 2,
                    "maxRetxThreshold": 32,
                    "t_PollRetransmit": 60,
                    "t_Reordering": 45
                }
            ],
            "srs_dedicated": {
                "srs_bandwidth": 2,
                "srs_bandwidth_config": 2,
                "srs_hopping_bandwidth": 0,
                "srs_period": 40,
                "srs_subframe_config": 3
            },
            "tac": 1,
            "transmission_mode": 3,
            "ul_64qam": true,
            "uldl_config": 6
        }
    ],
    "com_addr": "127.0.1.2:9001",
    "enb_id": 107216,
    "gtp_addr": "127.0.1.1",
    "log_filename": "log/enb.log",
    "log_options": "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null",
    "mme_list": [
        {
            "mme_addr": "127.0.1.100"
        }
    ],
    "rf_driver": {
        "args": "dev0=/dev/sdr0",
        "name": "sdr",
        "realtime": 1,
        "rx_antenna": "tx_rx",
        "tdd_tx_mod": 1
    },
    "rx_gain": 43,
    "tx_gain": 62
}
```

So that it is possible to try running enb on generated configs becuase
with previous numbers enb refuses to start:

    ~/enb# ./lteenb  x/old/enb.cfg
    ...
    x/old/enb.cfg:50: field 'dl_earfcn': range is [0:262143] (LTE Cell #0)

    ~/enb# ./lteenb  x/old/gnb.cfg
    ...
    x/old/gnb.cfg:54: invalid frequency band (NR Cell #1)

We need enb to be able to start with generated config because enb dumps in its
enb.log the real configuration that it builds from cell_list + cell_default and
nr_cell_list + cell_default - which is possible to extract via `json_util` and
which we want to check after our changes to enb.jinja2.cfg to see if we
really don't introduce semantic mistakes when e.g. moving things in between
cell_default to cell_list (see next patch).

With new frequencies enb and gnb both start ok.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1515

For example there is no slaptap under StandaloneSlapOS and <RU>-netconf-socket
promise needs real RU hardware to be around and accepting incoming connections.

If we don't wrap such things with `if not testing` running test on testnodes will fail.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1514

Less need to keep default synchronized and less noise in the code. We will need
to refer to `testing` more in the next patch, so it will help a bit.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1514

Similarly to f365a440 (software/ors-amarisoft: Merge gnb.jinja2.cfg into
enb.jinja2.cfg) merge LTE and NR configuration files for UEsim into single
config as the preparation for MultiRU - there UEsim will be also handling TDD,
FDD, LTE and NR cells and UEs all at the same time.

In this patch for now we only move code without changing it and wrap parts with
`if do_lte` and `if do_nr` correspondingly.  The end result of rendered
ue-lte.cfg and ue-nr.cfg stays practically the same as shown in the appendix.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1513

--------

Appendix. Diff for rendered ue-*.cfg before and after this patch.

```
$ ./pythonwitheggs slapos-render-config.py && git diff --no-index -w config/old/ config/out/
```

```diff
diff --git a/config/old/ue-lte.cfg b/config/out/ue-lte.cfg
index 7f1530daf..836a95e79 100644
--- a/config/old/ue-lte.cfg
+++ b/config/out/ue-lte.cfg
@@ -1,5 +1,6 @@

 #define N_RB_DL             50
+
 {
   log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null",
   log_filename: "log/ue.log",
@@ -14,7 +15,8 @@ rf_driver: {
 },
   tx_gain: 60,
   rx_gain: 40,
-  cell_groups: [{
+  cell_groups: [
+  {
     multi_ue: true,
     cells: [
       {
@@ -27,7 +29,8 @@ rf_driver: {
     ],
     pdcch_decode_opt: false,
     pdcch_decode_opt_threshold: 0.1,
-  }],
+  },
+  ],
   ue_list: [
     {
     sim_algo: "milenage",
@@ -38,8 +41,8 @@ rf_driver: {
     impi: "",
     imsi: "001010123456789",
     K: "00112233445566778899aabbccddeeff",
-    rue_addr: "host1",
     ue_category: 12,
+    rue_addr: "host1",
     tun_setup_script: "ue-ifup",
     apn: "internet",
     }
diff --git a/config/old/ue-nr.cfg b/config/out/ue-nr.cfg
index 41758ab6f..631e1ab1e 100644
--- a/config/old/ue-nr.cfg
+++ b/config/out/ue-nr.cfg
@@ -1,3 +1,5 @@
+
+
 {
   log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null",
   log_filename: "log/ue.log",
@@ -12,7 +14,8 @@ rf_driver: {
 },
   tx_gain: 60,
   rx_gain: 40,
-    cell_groups: [{
+  cell_groups: [
+  {
     group_type: "nr",
     multi_ue: false,
     cells: [{
@@ -26,7 +29,8 @@ rf_driver: {
       n_antenna_ul: 2,
       }
     ],
-    }],
+  },
+  ],
   ue_list: [
     {
     sim_algo: "milenage",
@@ -37,11 +41,11 @@ rf_driver: {
     impi: "",
     imsi: "001010123456789",
     K: "00112233445566778899aabbccddeeff",
-      rue_addr: "host2",
     as_release: 15,
     ue_category: "nr",
+    rue_addr: "host2",
     tun_setup_script: "ue-ifup",
     apn: "internet",
     }
-    ]
+  ],
 }
```

This is useful during development while working on ue-*.jinja2.cfg

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1513

We are going to generate more and more type of files via slapos-render-config:
currently we generate only enb.cfg and gnb.cfg, but soon it will be also
ue-*.cfg, drb_*.cfg, asn etc.

So it will be handy to easily separate generated files from their source, to
make snapshots of generated stuff for comparison, and to also e.g. to be able
to copy generated configs to a callbox/simbox for testing.

-> Move the place where generated files are emitted from config/ to config/out/

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1513

Now that we have a more modern firefox, it requires secure context for
many things. This fixes `TypeError: crypto.subtle is undefined` test
failures for JIO.

See merge request nexedi/slapos!1503

Split command which is used to split pgdump files before push to gitlab backup repository crash during
backup process. This problem occurs with version starting from 9.2, older versions doesn't have this problem.
The version 9.1 is used for gitlab-backup so.

For more details, see: nexedi/slapos!1503 (diffs, comment 197515)

See merge request nexedi/slapos!1506

While not faulty in itself, f365a440 caused ors-amarisoft testsuite to start failing with

    ERROR: test_gnb_conf (testTDD.TestGNBParameters1)
    ----------------------------------------------------------------------
    Traceback (most recent call last):
      File ".../slapos-repository/software/ors-amarisoft/test/testTDD.py", line 298, in test_gnb_conf
        test_gnb_conf1(self)
      File ".../slapos-repository/software/ors-amarisoft/test/testTDD.py", line 184, in test_gnb_conf1
        self.assertEqual(conf['tx_gain'], gnb_param_dict1['tx_gain'])
    KeyError: 'tx_gain'

( https://erp5js.nexedi.net/#/test_result_module/20240119-1C2BDD94/45 )

This happens because previously gnb.jinja2.cfg emitted tx_gain/rx_gain and everything else for SDR case when `ru != "m2ru"`:

    https://lab.nexedi.com/nexedi/slapos/blob/d078060c/software/ors-amarisoft/config/gnb.jinja2.cfg#L22-55

while enb.jinja2.cfg had this only under `if bbu == "ors"`:

    https://lab.nexedi.com/nexedi/slapos/blob/d078060c/software/ors-amarisoft/config/enb.jinja2.cfg#L44-114

so since bbu != "ors" when tests are run via `testTDD.py` and `testFDD.py`
(and `testTDD-ORS.py` is not  ran at all as I explained in nexedi/slapos.toolbox!129)
this resulted in gnb.cfg not to have tx_gain/rx_gain for bbu != ors case and
corresponding test failure.

There is no real problem for ORS since for `bbu==ors` tx_gain/rx_gain are emitted.

-> Fix testsuite to pass again similarly to how it was done in b32b4a8e
   (software/ors-amarisoft: general improvement for RU (logs/promises/input
   parameters) for now).

In the future ORS case will be verified by dedicated test_ors.py which will
have checks for tx_gain and rx_gain unconditionally applied, while support for
all other cases will be handled by generic test.py which will have different
logic for how rf_driver section is generated and verified.

https://lab.nexedi.com/kirr/slapos/blob/b21d2636/software/ors-amarisoft/test/test_ors.py
https://lab.nexedi.com/kirr/slapos/blob/b21d2636/software/ors-amarisoft/test/test.py

This makes urljoin works as expected and generally makes sense because
this is a collection.

See merge request nexedi/slapos!1500

Directly expose all passlib.hash supported hashes, using a `passwd-`
prefix. For example, to access `sha256_crypt`, use `passwd-sha256-crypt`
option name.

  [secret]
  recipe = slapos.cookbook:generate.password

  [config-file]
  hashed-password = ${secret:passwd-sha256-crypt}

This changes the format of storage-path, it used to be the password in
plain text, it is now a mapping also containing hashed passwords, to
have the same hashed passwords for each buildout run.

This needs collaboration from publish_early recipe, because .pop(k) does
raised a KeyError with the dict.__missing__  approach.

In MultiRU there will be only one ENB which supports all TDD, FDD, LTE and NR
cells and different types of radio units - all at the same time. This patch is
preparatory step for that: it merges gnb configuration template into enb
configuration template, so that enb.jinja2.cfg now serves both enb and gnb
instances.

In this patch for now we only move code from gnb.jinja2.cfg without changing
it(*) and wrap parts with `if do_lte` and `if do_nr` correspondingly.

The end result of rendered enb.cfg and gnb.cfg stays the same modulo space
changes and added innoccent `#define TDD` as Appendix shows.

(*) the only exception is set up of gtp_addr which has practically the same
code, was wrapped with `if mme_list` in enb and `if amf_list` in gnb, and is now
wrapped with `if mme_list or amf_list`.

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/reviewed-by @jhuge
/reviewed-on nexedi/slapos!1512

--------

Appendix. Diff for rendered enb.cfg and gnb.cfg before and after this patch.

```
$ ./pythonwitheggs slapos-render-config.py && (git diff -w --no-index config/enb.cfg.old config/enb.cfg ; git diff -w --no-index config/gnb.cfg.old config/gnb.cfg)
```

```diff
diff --git a/config/enb.cfg.old b/config/enb.cfg
index fdf3ab24d..cb46697ea 100644
--- a/config/enb.cfg.old
+++ b/config/enb.cfg
@@ -1,11 +1,15 @@

+
 #define TDD                 1

 #define N_RB_DL             50
+
 #define N_ANTENNA_DL        2
+
 #define N_ANTENNA_UL        2

+
 {

   log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rota>
@@ -24,7 +28,6 @@
   rx_gain: 43,

   com_addr: "127.0.1.2:9001",
-
   mme_list: [

     {
@@ -33,9 +36,9 @@

   ],

+
   gtp_addr: "127.0.1.1",

-
   enb_id: 0x1A2D0,

   cell_list: [{
@@ -49,7 +52,6 @@
       ],
     }
   ],
-
   cell_default: {
     plmn_list: [
       "00101",
@@ -226,4 +228,6 @@
   meas_gap_config: "gp0",
   ho_from_meas: true,
   },
+
+
 }
\ No newline at end of file
diff --git a/config/gnb.cfg.old b/config/gnb.cfg
index e3d671e09..4e47a2094 100644
--- a/config/gnb.cfg.old
+++ b/config/gnb.cfg
@@ -1,15 +1,21 @@

+
+#define TDD                 1
+
+
 #define N_ANTENNA_DL        2

 #define N_ANTENNA_UL        2

+
 {

   log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rota>

   log_filename: "log/gnb.log",

+
   rf_driver: {
       name: "sdr",
       args: "dev0=/dev/sdr0",
@@ -30,15 +36,17 @@
   ],

-
-
   gtp_addr: "127.0.1.1",

   gnb_id_bits: 28,
   gnb_id: 0x12345,
   en_dc_support: true,
-  cell_list: [],
+
+  cell_list: [
+  ],
+
+
   nr_cell_list: [
   {
     rf_port: 0,
```