When assessing whether A <= B, the poset's OrderedOrEqual has a passing
condition which permits A <= B, but is not sufficient to infer that A <= B.
This CL removes that incorrect passing condition.

Having identified that A and B are in the poset, the method will report that
A <= B if any of these three conditions are true:
 (1) A and B are the same node in the poset.
 	- This means we know that A == B.
 (2) There is a directed path, strict or not, from A -> B
 	- This means we know that, at least, A <= B, but A < B is possible.
 (3) There is a directed path from B -> A, AND that path has no strict edges.
 	- This means we know that B <= A, but do not know that B < A.

In condition (3), we do not have enough information to say that A <= B, rather
we only know that B == A (which satisfies A <= B) is possible. The way I
understand it, a strict edge shows a known, strictly-ordered relation (<) but
the lack of a strict edge does not show the lack of a strictly-ordered relation.

The difference is highlighted by the example in #34802, where a bounds check is
incorrectly removed by prove, such that negative indexes into a slice
succeed:

	n := make([]int, 1)
	for i := -1; i <= 0; i++ {
	    fmt.Printf("i is %d\n", i)
	    n[i] = 1  // No Bounds check, program runs, assignment to n[-1] succeeds!!
	}

When prove is checking the negative/failed branch from the bounds check at n[i],
in the signed domain we learn (0 > i || i >= len(n)). Because prove can't learn
the OR condition, we check whether we know that i is non-negative so we can
learn something, namely that i >= len(n). Prove uses the poset to check whether
we know that i is non-negative.  At this point the poset holds the following
relations as a directed graph:

	-1 <= i <= 0
	-1 < 0

In poset.OrderedOrEqual, we are testing for 0 <= i. In this case, condition (3)
above is true because there is a non-strict path from i -> 0, and that path
does NOT have any strict edges. Because this condition is true, the poset
reports to prove that i is known to be >= 0. Knowing, incorrectly, that i >= 0,
prove learns from the failed bounds check that i >= len(n) in the signed domain.

When the slice, n, was created, prove learned that len(n) == 1. Because i is
also the induction variable for the loop, upon entering the loop, prove previously
learned that i is in [-1,0]. So when prove attempts to learn from the failed
bounds check, it finds the new fact, i > len(n), unsatisfiable given that it
previously learned that i <= 0 and len(n) = 1.

Fixes #34802

Change-Id: I235f4224bef97700c3aa5c01edcc595eb9f13afc
Reviewed-on: https://go-review.googlesource.com/c/go/+/200759
Run-TryBot: Zach Jones <zachj1@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>

Change-Id: Id0f4955588ae8027a24465b456c90d0543d60db2
Reviewed-on: https://go-review.googlesource.com/c/go/+/200581
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Passes toolstash-check.

Updates #23017

Change-Id: I0ae82e28a6e9e732ba2a6aa98f9b35551efcea10
Reviewed-on: https://go-review.googlesource.com/c/go/+/200580
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Fixes #34854

Change-Id: I7d6819c439e2fdfb19e181b202797fd5851eb002
Reviewed-on: https://go-review.googlesource.com/c/go/+/200839
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

nanotime() currently uses the REALTIME clock to get the elapsed
time in Solaris. This commit changes it to use the MONOTONIC clock
instead, similar to how it's done in Linux and other OSs. Also changed
nanotime() and walltime() to call clock_gettime() library function
directly from Go code rather than from assembly.

Fixes #33674

Change-Id: Ie4a687b17d2140998ecd97af6ce048c86cf5fc02
Reviewed-on: https://go-review.googlesource.com/c/go/+/199502
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>

This timeout will never be reached if the test passes, so it doesn't
much matter how long it is. The test is t.Parallel so on a slow system
1 second may occasionally not be enough, although on my laptop the
test takes about 0.02 seconds.

Fixes #34431

Change-Id: Ia2184e6be3747933bfe83aa6c8e1f77e6b1e0bba
Reviewed-on: https://go-review.googlesource.com/c/go/+/200764
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

If the runtime disables the SIGPROF handler, because this is Go code
that is linked into a non-Go program, then don't go back to the
default handling of SIGPROF; just start ignoring SIGPROF.
Otherwise the program can get killed by a stray SIGPROF that is
delivered, presumably to a different thread, after profiling is disabled.

Fixes #19320

Change-Id: Ifebae477d726699c8c82c867604b73110c1cf262
Reviewed-on: https://go-review.googlesource.com/c/go/+/200740
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

The slice capacity is known for all these cases. Therefore,
we can initialize them with the desired capacity.

Change-Id: I1835b49108d157203d62e4aa119c2d7ab5e5e46f
Reviewed-on: https://go-review.googlesource.com/c/go/+/200119
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #26123

Change-Id: If0dad65a3885d2146624f2aac42099e9eca9670e
Reviewed-on: https://go-review.googlesource.com/c/go/+/200758
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This change integrates changes made to x/mod packages into our internal
copies of those packages.

This is the first step of a bidirectional synchronization. A follow-up
change will copy changes made to the internal packages after x/mod was
forked. After that, we can vendor x/mod, update imports, and delete
the internal copies.

The following packages are affected:

* internal/module
* internal/semver (no change)
* internal/sumweb (renamed to internal/sumdb)
* internal/dirhash
* internal/note
* internal/tlog

Several integrated changes affect other packages:

* cmd/go/internal/module.MatchPathMajor now wraps a new function,
  CheckPathMajor, which returns error. MatchPathMajor returns
  bool. This will avoid an incompatible change in the next step.
* module.EncodePath renamed to EscapePath, EncodeVersion to
  EscapeVersion, DecodePath to UnescapePath, DecodeVersion to
  UnescapeVersion.
* cmd/go/internal/sumweb moved to cmd/go/internal/sumdb and package
  renamed to sumdb.
* sumdb.Client renamed to ClientOps, Conn to Client, Server to
  ServerOps, Paths to ServerPaths.
* sumdb/encode.go and encode_test.go are not present in x/mod since
  they are redundant with functionality in module. Both files are
  deleted.
* sumdb.TestServer doesn't implement sumdb.ServerOps after changes
  were were made to golang.org/x/mod/sumdb.ServerOps during the fork.
  Local changes made so tests will pass. These will be copied to x/mod
  in the next step.

Updates #34801

Change-Id: I7e820f10ae0cdbec238e59d039e978fd1cdc7201
Reviewed-on: https://go-review.googlesource.com/c/go/+/200138
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

An extra goroutine is necessary to handle asynchronous events on wasm.
However, we do not want this goroutine to exist all the time.
This change makes it short-lived, so it ends after the asynchronous
event was handled.

Fixes #34768

Change-Id: I24626ff0af9d803a01ebe33fbb584d04d2059a44
Reviewed-on: https://go-review.googlesource.com/c/go/+/200497
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

We couldn't do this before because sighandler was compiled for nacl.

Updates #30439

Change-Id: Ieec9938b6a1796c48d251cd8b1db1a42c25f3943
Reviewed-on: https://go-review.googlesource.com/c/go/+/200739
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

NextPart has automatic handling of quoted-printable encoding,
which is sometimes undesirable. NextRawPart adds a method
for reading a part while bypassing such automatic handling.

Fixes #29090

Change-Id: I6a042a4077c64091efa3f5dbecce0d9a34ac7065
Reviewed-on: https://go-review.googlesource.com/c/go/+/152877
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

RFC 5322 date format allows CFWS after the timezone.
If CFWS is valid, it is discarded and parsing is done as before
using time.Parse().
Existing test is extended with limit cases and invalid strings.

Fixes #22661

Change-Id: I54b96d7bc384b751962a76690e7e4786217a7941
Reviewed-on: https://go-review.googlesource.com/c/go/+/117596
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This makes Decoder.offset public while renaming it to
Decoder.InputOffset to match encoding/xml Decoder API

Code changes made by Adam Stankiewicz [sheerun@sher.pl]

Fixes #29688

Change-Id: I86dbfd2b2da80160846e92bfa580c53d8d45e2db
Reviewed-on: https://go-review.googlesource.com/c/go/+/200677
Run-TryBot: Johan Brandhorst <johan.brandhorst@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Avoid an out-of-range error when calling LongString on a generic
block.

Change-Id: I33ca88940d899bc71e3155bc63d2aa925cf83230
Reviewed-on: https://go-review.googlesource.com/c/go/+/200737
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>

Increases the exec timeout from 5sec to 1min, but
also print out the error value on any test failure.

Fixes #34836

Change-Id: Ida2b8bd460243491ef0f90dfe0f978dfe02a0703
Reviewed-on: https://go-review.googlesource.com/c/go/+/200519
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

We should keep a consistent way of formatting errors
in this file.

Fixes #34848

Change-Id: Ibb75908504f381fccab0281a42e788ef8c716b6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/200679
Run-TryBot: Johan Brandhorst <johan.brandhorst@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>

Fixes #34846
Change-Id: I24b3e65fc96ec85b2821480e9396c9d1663611c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/200678
Run-TryBot: Johan Brandhorst <johan.brandhorst@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Johan Brandhorst <johan.brandhorst@gmail.com>

Fixes #34847

Change-Id: Ibb58c8820cdab8b9f3755fcfba754ad0c9ca982f
Reviewed-on: https://go-review.googlesource.com/c/go/+/200657
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <mail@eliasnaur.com>

Coalesce set/get pairs into a tee.

Change-Id: I88ccdcb148465615437bebf24145e941a037e0a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200357
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Part 1: CL 199499 (GOOS nacl)
Part 2: CL 200077 (amd64p32 files, toolchain)
Part 3: stuff that arguably should've been part of Part 2, but I forgot
        one of my grep patterns when splitting the original CL up into
        two parts.

This one might also have interesting stuff to resurrect for any future
x32 ABI support.

Updates #30439

Change-Id: I2b4143374a253a003666f3c69e776b7e456bdb9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/200318
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #34768

Change-Id: Ic73591f620cdee5bc7203483902e6ba98d2c442b
Reviewed-on: https://go-review.googlesource.com/c/go/+/200438Reviewed-by: Bryan C. Mills <bcmills@google.com>

Change-Id: If5a272f331fe9da09467efedd0231a4ce34db0f8
GitHub-Last-Rev: 4b81a79a92db4b51001ce6660b24c760fd3b630b
GitHub-Pull-Request: golang/go#28420
Reviewed-on: https://go-review.googlesource.com/c/go/+/144999
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>

Also, in cmd/doc, avoid calling 'go list -m all' when in module mode
outside a module since it's now an error.

Fixes #32027

Change-Id: I7224c7fdf7e950bce6c058ab2a5837c27ba3b899
Reviewed-on: https://go-review.googlesource.com/c/go/+/200297
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Walking the progs is simpler than using the is_stmt symbol shenanigans.
This is a reinstatement of CL 196661, which was rolled back due to tests
failing. Unlike that original CL, this change should output the same
debug_lines data the original approach wrote.

The stats for JUST this CLC, note teh small speedup in compilation, and
the lack of difference in binary size.

name                      old time/op       new time/op       delta
Template                        229ms ± 4%        218ms ± 1%  -4.95%  (p=0.000 n=10+8)
Unicode                        92.6ms ± 9%       88.6ms ±13%    ~     (p=0.089 n=10+10)
GoTypes                         850ms ± 2%        831ms ± 4%  -2.23%  (p=0.009 n=10+10)
Compiler                        3.99s ± 1%        3.93s ± 1%  -1.29%  (p=0.000 n=10+9)
SSA                             13.7s ± 1%        13.7s ± 1%    ~     (p=0.912 n=10+10)
Flate                           140ms ± 3%        138ms ± 3%  -1.90%  (p=0.009 n=10+10)
GoParser                        172ms ± 2%        169ms ± 4%    ~     (p=0.095 n=9+10)
Reflect                         530ms ± 3%        516ms ± 5%    ~     (p=0.052 n=10+10)
Tar                             202ms ± 1%        196ms ± 3%  -2.83%  (p=0.002 n=9+10)
XML                             280ms ± 3%        270ms ± 4%  -3.48%  (p=0.009 n=10+10)
LinkCompiler                    927ms ± 2%        907ms ± 4%    ~     (p=0.052 n=10+10)
ExternalLinkCompiler            1.97s ± 2%        1.97s ± 3%    ~     (p=0.853 n=10+10)
LinkWithoutDebugCompiler        549ms ± 3%        543ms ± 5%    ~     (p=0.481 n=10+10)
StdCmd                          12.0s ± 1%        12.0s ± 1%    ~     (p=0.905 n=9+10)

name                      old user-time/op  new user-time/op  delta
Template                        372ms ±18%        344ms ±11%    ~     (p=0.190 n=10+10)
Unicode                         264ms ±23%        241ms ±43%    ~     (p=0.315 n=8+10)
GoTypes                         1.56s ±22%        1.68s ± 5%    ~     (p=0.237 n=10+8)
Compiler                        7.41s ± 2%        7.31s ± 3%    ~     (p=0.123 n=10+10)
SSA                             24.5s ± 2%        24.7s ± 1%    ~     (p=0.133 n=10+9)
Flate                           199ms ± 6%        188ms ±28%    ~     (p=0.353 n=10+10)
GoParser                        243ms ±11%        240ms ± 6%    ~     (p=0.968 n=10+9)
Reflect                         929ms ±21%        862ms ±35%    ~     (p=0.190 n=10+10)
Tar                             284ms ± 9%        296ms ±17%    ~     (p=0.497 n=9+10)
XML                             386ms ±21%        398ms ±28%    ~     (p=1.000 n=9+10)
LinkCompiler                    1.13s ± 9%        1.12s ± 8%    ~     (p=0.546 n=9+9)
ExternalLinkCompiler            2.37s ±15%        2.30s ± 9%    ~     (p=0.549 n=10+9)
LinkWithoutDebugCompiler        646ms ±10%        642ms ±13%    ~     (p=0.853 n=10+10)

name                      old alloc/op      new alloc/op      delta
Template                       36.5MB ± 0%       36.5MB ± 0%  -0.11%  (p=0.000 n=10+9)
Unicode                        28.5MB ± 0%       28.5MB ± 0%    ~     (p=0.190 n=10+10)
GoTypes                         121MB ± 0%        121MB ± 0%  -0.10%  (p=0.000 n=9+10)
Compiler                        549MB ± 0%        549MB ± 0%  -0.10%  (p=0.000 n=9+10)
SSA                            1.92GB ± 0%       1.92GB ± 0%  -0.13%  (p=0.000 n=10+10)
Flate                          23.0MB ± 0%       23.0MB ± 0%  -0.07%  (p=0.000 n=10+10)
GoParser                       27.9MB ± 0%       27.9MB ± 0%  -0.09%  (p=0.000 n=10+10)
Reflect                        77.9MB ± 0%       77.8MB ± 0%  -0.13%  (p=0.000 n=9+10)
Tar                            34.5MB ± 0%       34.4MB ± 0%  -0.09%  (p=0.000 n=10+10)
XML                            44.3MB ± 0%       44.3MB ± 0%  -0.08%  (p=0.000 n=10+10)
LinkCompiler                    229MB ± 0%        225MB ± 0%  -1.74%  (p=0.000 n=10+10)
ExternalLinkCompiler            233MB ± 0%        242MB ± 0%  +3.81%  (p=0.000 n=10+10)
LinkWithoutDebugCompiler        156MB ± 0%        152MB ± 0%  -2.29%  (p=0.000 n=10+9)

name                      old allocs/op     new allocs/op     delta
Template                         373k ± 0%         373k ± 0%  -0.21%  (p=0.000 n=10+10)
Unicode                          340k ± 0%         340k ± 0%  -0.04%  (p=0.000 n=10+10)
GoTypes                         1.33M ± 0%        1.33M ± 0%  -0.20%  (p=0.000 n=10+9)
Compiler                        5.39M ± 0%        5.38M ± 0%  -0.16%  (p=0.000 n=10+10)
SSA                             18.3M ± 0%        18.2M ± 0%  -0.15%  (p=0.000 n=10+10)
Flate                            235k ± 0%         234k ± 0%  -0.23%  (p=0.000 n=10+7)
GoParser                         309k ± 0%         308k ± 0%  -0.20%  (p=0.000 n=10+10)
Reflect                          970k ± 0%         968k ± 0%  -0.30%  (p=0.000 n=10+10)
Tar                              347k ± 0%         347k ± 0%  -0.22%  (p=0.000 n=10+10)
XML                              425k ± 0%         424k ± 0%  -0.16%  (p=0.000 n=10+10)
LinkCompiler                     602k ± 0%         601k ± 0%  -0.03%  (p=0.000 n=9+10)
ExternalLinkCompiler            1.65M ± 0%        1.65M ± 0%  -0.02%  (p=0.000 n=10+10)
LinkWithoutDebugCompiler         220k ± 0%         220k ± 0%  -0.03%  (p=0.016 n=10+9)

name                      old object-bytes  new object-bytes  delta
Template                        553kB ± 0%        553kB ± 0%  -0.01%  (p=0.000 n=10+10)
Unicode                         215kB ± 0%        215kB ± 0%    ~     (all equal)
GoTypes                        2.02MB ± 0%       2.02MB ± 0%  -0.00%  (p=0.000 n=10+10)
Compiler                       7.98MB ± 0%       7.98MB ± 0%  -0.01%  (p=0.000 n=10+10)
SSA                            27.1MB ± 0%       27.1MB ± 0%  -0.00%  (p=0.000 n=10+10)
Flate                           340kB ± 0%        340kB ± 0%  -0.01%  (p=0.000 n=10+10)
GoParser                        434kB ± 0%        434kB ± 0%  -0.00%  (p=0.000 n=10+10)
Reflect                        1.34MB ± 0%       1.34MB ± 0%  -0.01%  (p=0.000 n=10+10)
Tar                             479kB ± 0%        479kB ± 0%  -0.00%  (p=0.000 n=10+10)
XML                             618kB ± 0%        618kB ± 0%  -0.01%  (p=0.000 n=10+10)

name                      old export-bytes  new export-bytes  delta
Template                       20.4kB ± 0%       20.4kB ± 0%    ~     (all equal)
Unicode                        8.21kB ± 0%       8.21kB ± 0%    ~     (all equal)
GoTypes                        36.6kB ± 0%       36.6kB ± 0%    ~     (all equal)
Compiler                        116kB ± 0%        116kB ± 0%  +0.00%  (p=0.000 n=10+10)
SSA                             141kB ± 0%        141kB ± 0%  +0.00%  (p=0.000 n=10+10)
Flate                          5.10kB ± 0%       5.10kB ± 0%    ~     (all equal)
GoParser                       8.92kB ± 0%       8.92kB ± 0%    ~     (all equal)
Reflect                        11.8kB ± 0%       11.8kB ± 0%    ~     (all equal)
Tar                            10.9kB ± 0%       10.9kB ± 0%    ~     (all equal)
XML                            17.4kB ± 0%       17.4kB ± 0%    ~     (all equal)

name                      old text-bytes    new text-bytes    delta
HelloSize                       742kB ± 0%        742kB ± 0%    ~     (all equal)
CmdGoSize                      10.6MB ± 0%       10.6MB ± 0%    ~     (all equal)

name                      old data-bytes    new data-bytes    delta
HelloSize                      10.7kB ± 0%       10.7kB ± 0%    ~     (all equal)
CmdGoSize                       312kB ± 0%        312kB ± 0%    ~     (all equal)

name                      old bss-bytes     new bss-bytes     delta
HelloSize                       122kB ± 0%        122kB ± 0%    ~     (all equal)
CmdGoSize                       146kB ± 0%        146kB ± 0%    ~     (all equal)

name                      old exe-bytes     new exe-bytes     delta
HelloSize                      1.10MB ± 0%       1.10MB ± 0%    ~     (all equal)
CmdGoSize                      14.9MB ± 0%       14.9MB ± 0%  -0.03%  (p=0.000 n=10+10)

Change-Id: Ie078a42b29353b96654fa1f0f47d600b5a53762d
Reviewed-on: https://go-review.googlesource.com/c/go/+/200017Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When unmarshaling to a map, the map's key type must either be a string,
an integer, or implement encoding.TextUnmarshaler. But for a user
defined type, reflect.Kind will not distinguish between the static type
and the underlying type. In:

	var x MyString = "x"
	t := reflect.TypeOf(x)
	println(t.Kind() == reflect.String)

the Kind of x is still reflect.String, even though the static type of x
is MyString.

Moreover, checking for the map's key type is a string occurs first, so
even if the map key type MyString implements encoding.TextUnmarshaler,
it will be ignored.

To fix the bug, check for encoding.TextUnmarshaler first.

Fixes #34437

Change-Id: I780e0b084575e1dddfbb433fe03857adf71d05fb
Reviewed-on: https://go-review.googlesource.com/c/go/+/200237
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>

Compact has been inconsistently escaping only some problematic characters
(U+2028 and U+2029), but not others (<, > and &). This change addresses
this inconsistency by removing the escaping of U+2028 and U+2029.

Callers who need to escape the output of Compact should use HTMLEscape
which escapes <, >, &, U+2028 and U+2029.

Fixes #34070
Fixes #30357
Updates #5836

Change-Id: Icfce7691d2b8b1d9b05ba7b64d2d1e4f3b67871b
GitHub-Last-Rev: 38859fe3e2fd586bbd45175c2742f7b123836bf3
GitHub-Pull-Request: golang/go#34804
Reviewed-on: https://go-review.googlesource.com/c/go/+/200217Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When in module mode outside of any module, 'go build' and most other
commands will now report an error instead of resolving a package path
to a module.

Previously, most commands would attempt to find the latest version of
a module providing the package. This could be very slow if many
packages needed to be resolved this way. Since there is no go.mod file
where module requirements can be saved, it's a repeatedly slow and
confusing experience.

After this change, 'go build' and other commands may still be used
outside of a module on packages in std and source files (.go
arguments) that only import packages in std. Listing any other package
on the command line or importing a package outside std will cause an
error.

'go get' is exempted from the new behavior, since it's expected that
'go get' resolves paths to modules at new versions.

Updates #32027

Change-Id: Ia9d3a3b4ad738ca5423472e17818d62b96a2c959
Reviewed-on: https://go-review.googlesource.com/c/go/+/198778
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Updates #34669

Change-Id: I8d0ee68885e804e131f42a512080486f9b25e9dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/199819
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

go/build.Import locates package dirctories using 'go list' when in
module mode (finding, downloading, and extracting modules is
complicated, so go/build does not handle it).

Previously, Import used 'go list' if GO111MODULE was not explicitly
off and a go.mod file was present (plus some other conditions). With
this change, if GO111MODULE is "on", a go.mod file does not need to be
present.

Fixes #34669

Change-Id: I9e56871054d4b07c3fc04b6f14a5c8c8e9f3c333
Reviewed-on: https://go-review.googlesource.com/c/go/+/199818
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

This is part two if the nacl removal. Part 1 was CL 199499.

This CL removes amd64p32 support, which might be useful in the future
if we implement the x32 ABI. It also removes the nacl bits in the
toolchain, and some remaining nacl bits.

Updates #30439

Change-Id: I2475d5bb066d1b474e00e40d95b520e7c2e286e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/200077Reviewed-by: Ian Lance Taylor <iant@golang.org>

Some code tags in the HTML were not properly closed. Close them so that
the text is rendered correctly.

Change-Id: I5c2170ffced313417f65004d53518128c34f7979
Reviewed-on: https://go-review.googlesource.com/c/go/+/200117Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change introduces a new interface, load.ImportPathError. An error
may satisfy this by providing an ImportPath method and including the
import path in its error text. modload.ImportMissingError satisfies
this interface. load.ImportErrorf also provides a convenient way to
create an error satisfying this interface with an arbitrary message.

When load.PackageError formats its error text, it may omit the last
path on the import stack if the wrapped error satisfies
ImportPathError and has a matching path.

To make this work, PackageError.Err is now an error instead of a
string. PackageError.MarshalJSON will write Err as a string for
'go list -json' output.

When go/build.Import invokes 'go list' in module mode, it now runs
with '-e' and includes '.Error' in the output format instead of
expecting the error to be in the raw stderr text. If a package error
is printed and a directory was not found, the error will be returned
without extra decoration.

Fixes #34752

Change-Id: I2d81dab7dec19e0ae9f51f6412bc9f30433a8596
Reviewed-on: https://go-review.googlesource.com/c/go/+/199840
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

This reverts CL 184457.

Reason for revert: introduced failures in the regression test for #18153.

Fixes #34791
Updates #29062

Change-Id: I4040965163f809083c023be055e69b1149d6214e
Reviewed-on: https://go-review.googlesource.com/c/go/+/200106
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When rewriting a go.mod file, we currently sort all of the require
lines in a block. The way the parser works is that it considers
preceding blank lines to be empty comment lines, and preceding empty
comment lines are "owned" by their adjoining line. So when we go to sort
them, the empty lines follow around each sorted entry, which doesn't
make a whole lot of sense, since usually vertical space is inserted to
show sections, and if things get moved around by sorting, those sections
are no longer meaningful. This all results in one especially troublesome
edge case: blank lines between a block opening ("require (") and the
first block line ("golang.org/x/sys ...") are not treated the same way
and are rewritten out of existence.

Here's an example of the behavior this fixes.

Starting input file:

    require (
        golang.zx2c4.com/wireguard master

        golang.org/x/crypto latest
        golang.org/x/net latest
        golang.org/x/sys latest
        golang.org/x/text latest

        github.com/lxn/walk latest
        github.com/lxn/win latest
    )

Now we run this through `GOPROXY=direct go get -d`:

    require (

        github.com/lxn/walk v0.0.0-20190619151032-86d8802c197a
        github.com/lxn/win v0.0.0-20190716185335-d1d36f0e4f48

        golang.org/x/crypto v0.0.0-20190820162420-60c769a6c586
        golang.org/x/net v0.0.0-20190813141303-74dc4d7220e7
        golang.org/x/sys v0.0.0-20190813064441-fde4db37ae7a
        golang.org/x/text v0.3.2
        golang.zx2c4.com/wireguard v0.0.20190806-0.20190822065259-3cedc22d7b49
    )

Notice how the blank lines before lxn/walk and x/crypto were preserved.

Finally, we have this be rewritten yet again with a call to `go build`:

    require (
        github.com/lxn/walk v0.0.0-20190619151032-86d8802c197a
        github.com/lxn/win v0.0.0-20190716185335-d1d36f0e4f48

        golang.org/x/crypto v0.0.0-20190820162420-60c769a6c586
        golang.org/x/net v0.0.0-20190813141303-74dc4d7220e7
        golang.org/x/sys v0.0.0-20190813064441-fde4db37ae7a
        golang.org/x/text v0.3.2
        golang.zx2c4.com/wireguard v0.0.20190806-0.20190822065259-3cedc22d7b49
    )

In this final resting point, the first blank line has been removed.

The discrepancy between those two last stages are especially bothersome,
because it makes for lots of dirty git commits and file contents
bouncing back and forth.

This commit fixes the problem as mentioned above, getting rid of those
preceding blank lines. The output in all cases looks as it should, like
this:

    require (
        github.com/lxn/walk v0.0.0-20190619151032-86d8802c197a
        github.com/lxn/win v0.0.0-20190716185335-d1d36f0e4f48
        golang.org/x/crypto v0.0.0-20190820162420-60c769a6c586
        golang.org/x/net v0.0.0-20190813141303-74dc4d7220e7
        golang.org/x/sys v0.0.0-20190813064441-fde4db37ae7a
        golang.org/x/text v0.3.2
        golang.zx2c4.com/wireguard v0.0.20190806-0.20190822065259-3cedc22d7b49
    )

Fixes #33779

Change-Id: I11c894440bd35f343ee62db3e06a50fa871f2599
Reviewed-on: https://go-review.googlesource.com/c/go/+/199917
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Updates x/net/http2 to git rev d66e71096ffb9f08f36d9aefcae80ce319de6d68

    http2: end stream eagerly after sending the request body
    https://golang.org/cl/181157 (fixes #32254)

    all: fix typos
    https://golang.org/cl/193799

    http2: fix memory leak in random write scheduler
    https://golang.org/cl/198462 (fixes #33812)

    http2: do not sniff body if Content-Encoding is set
    https://golang.org/cl/199841 (updates #31753)

Also unskips tests from CL 199799.

Change-Id: I241c0b1cd18cad5041485be92809137a973e33bd
Reviewed-on: https://go-review.googlesource.com/c/go/+/200102
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #31753

Change-Id: I32ec5906ef6714e19b094f67cb0f10a211a9c500
Reviewed-on: https://go-review.googlesource.com/c/go/+/199799
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #33848

Change-Id: I81663386297282397ce1b546a8b15597bfbcea78
Reviewed-on: https://go-review.googlesource.com/c/go/+/199821
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This implements the proposal described in
https://golang.org/issue/33848#issuecomment-537222782.

Fixes #33848

Change-Id: Ia34d6500ca396b6aa644b920233716c6b83ef729
Reviewed-on: https://go-review.googlesource.com/c/go/+/198319
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>