- 04 Oct, 2019 5 commits
-
-
Vojtech Bocek authored
According to spec, the hash must be truncated, but crypto/dsa does not do it. We can't fix it in crypto/dsa, because it would break verification of previously generated signatures. In crypto/x509 however, go can't generate DSA certs, only verify them, so the fix here should be safe. Fixes #22017 Change-Id: Iee7e20a5d76f45da8901a7ca686063639092949f GitHub-Last-Rev: 8041cde8d25d3a336b81d86bd52bff5039568246 GitHub-Pull-Request: golang/go#34630 Reviewed-on: https://go-review.googlesource.com/c/go/+/198138Reviewed-by:
Filippo Valsorda <filippo@golang.org>
-
Bryan C. Mills authored
'GOFLAGS=-mod=vendor' currently causes 'go get' to always fail unless the '-mod' flag is explicitly overwritten. Moreover, as of CL 198319 we plan to set -mod=vendor by default if a vendor directory is present, so all users with vendor directories will be affected — not just those who set 'GOFLAGS' explicitly. Similarly, an explicit '-mod=readonly' argument to 'go get' is currently ignored as a special case, but the fact that it is ignored (rather than rejected) can be very surprising. Rather than adding more special cases, we should remove the '-mod' flag from 'go get' entirely. Fixes #30345 Fixes #32502 Updates #33848 Change-Id: Iecd3233ca3ef580ca3a66bd5e6ee8d86d4cbd8a7 Reviewed-on: https://go-review.googlesource.com/c/go/+/198438 Run-TryBot: Bryan C. Mills <bcmills@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Jay Conrod <jayconrod@google.com>
-
Alberto Donizetti authored
CL 188317 introduced a compiler crash during dwarf generation which was reported as Issue #34520. After CL 188217, the issue appears to be fixed. Add a testcase to avoid future regressions. Fixes #34520 Change-Id: I73544a9e9baf8dbfb85c19eb6d202beea05affb6 Reviewed-on: https://go-review.googlesource.com/c/go/+/198546 Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
David Chase <drchase@google.com>
-
Duco van Amstel authored
Passing ambiguous patterns, ending in `.go`, to `go list` results in them being interpreted as Go files despite potentially being package references. This can then result in errors on other package references. The parsing logic is modified to check for a locally present file corresponding to any pattern ending in `.go`. If no such file is present the pattern is considered to be a package reference. We're also adding a variety of non-regression tests that fail with the original parsing code but passes after applying the fix. Fixes #32483 Fixes #34653 Change-Id: I073871da0dfc5641a359643f95ac14608fdca09b GitHub-Last-Rev: 5abc200103ffc122df05422d79cf30c3ba0ee646 GitHub-Pull-Request: golang/go#34663 Reviewed-on: https://go-review.googlesource.com/c/go/+/198459 Run-TryBot: Bryan C. Mills <bcmills@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Bryan C. Mills <bcmills@google.com>
-
Josh Bleecher Snyder authored
The existing text was hard to parse. Shorten the sentences and simplify the text. Change-Id: Ic16f486925090ea303c04e70969e5a4b27a60896 Reviewed-on: https://go-review.googlesource.com/c/go/+/198758Reviewed-by:
Ian Lance Taylor <iant@golang.org>
-
- 03 Oct, 2019 17 commits
-
-
David Chase authored
Nilcheck would move statements from NilCheck values to others that turned out were already dead, which leads to lost statements. Better to eliminate the dead code first. One "error" is removed from test/prove.go because the code is actually dead, and the additional deadcode pass removes it before prove can run. Change-Id: If75926ca1acbb59c7ab9c8ef14d60a02a0a94f8b Reviewed-on: https://go-review.googlesource.com/c/go/+/198479 Run-TryBot: David Chase <drchase@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Jeremy Faller <jeremy@golang.org>
-
David Chase authored
The earlier code was picking nodes that were "poor choices" and thus sometimes losing statements altogether. Change-Id: Ibe5ed800ffbd3c926c0ab1bc10c77d72d3042e45 Reviewed-on: https://go-review.googlesource.com/c/go/+/198478 Run-TryBot: David Chase <drchase@google.com> Reviewed-by:
-
David Chase authored
Aggregate-making nodes that are later decomposed are poor choices for statements, because the decomposition phase turns them into multiple sub-values, some of which may be dead. Better to look elsewhere for a statement mark. Change-Id: Ibd9584138ab3d1384548686896a28580a2e43f54 Reviewed-on: https://go-review.googlesource.com/c/go/+/198477 Run-TryBot: David Chase <drchase@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Cherry Zhang <cherryyz@google.com>
-
David Chase authored
The previous version used the position of the switch statement, which makes for potentially jumpy stepping and introduces a large number of statements repeating the line (tricky for inserting breaks). It also shared a single OBREAK node and this was not really a syntax "tree". This improves both the nostmt test (by 6 lines) and reduces the total badness score from dwarf-goodness (by about 200). Change-Id: I1f71b231a26f152bdb6ce9bc8f95828bb222f665 Reviewed-on: https://go-review.googlesource.com/c/go/+/188218 Run-TryBot: David Chase <drchase@google.com> Reviewed-by:
-
David Chase authored
1) An empty block is treated as not-a-statement unless its line differs from at least one of its predecessors (it might make sense to rearrange branches in predecessors, but that is a different issue). 2) When iterating forward to choose a "good" place for a statement, actually check that the chosen place is in fact good. 3) Refactor same line and same file into methods on XPos and Pos. This reduces the failure rate of ssa/stmtlines_test by 7-ish lines. (And interacts favorably with later debugging CLs.) Change-Id: Idb7cca7068f6fc9fbfdbe25bc0da15bcfc7b9d4a Reviewed-on: https://go-review.googlesource.com/c/go/+/188217 Run-TryBot: David Chase <drchase@google.com> Reviewed-by:
-
Matthew Dempsky authored
Makes it easier to run go build -a -gcflags=-d=export std |& grep ^BenchmarkExportSize and get useful output for feeding into benchstat. Change-Id: I2b52e8f5ff33b7ccb6c25b18e464513344bd9ad9 Reviewed-on: https://go-review.googlesource.com/c/go/+/198698Reviewed-by:Robert Griesemer <gri@golang.org>
-
Meng Zhuo authored
The original CL of mips64x compare function has been reverted due to wrong implement for little endian. Original CL: https://go-review.googlesource.com/c/go/+/196837 name old time/op new time/op delta BytesCompare/1 28.9ns ± 4% 22.1ns ± 0% -23.60% (p=0.000 n=9+8) BytesCompare/2 34.6ns ± 0% 23.1ns ± 0% -33.25% (p=0.000 n=8+10) BytesCompare/4 54.6ns ± 0% 40.8ns ± 0% -25.27% (p=0.000 n=8+8) BytesCompare/8 73.9ns ± 0% 49.1ns ± 0% -33.56% (p=0.000 n=8+8) BytesCompare/16 113ns ± 0% 24ns ± 0% -79.20% (p=0.000 n=9+9) BytesCompare/32 190ns ± 0% 26ns ± 0% -86.53% (p=0.000 n=10+10) BytesCompare/64 345ns ± 0% 44ns ± 0% -87.19% (p=0.000 n=10+8) BytesCompare/128 654ns ± 0% 52ns ± 0% -91.97% (p=0.000 n=9+8) BytesCompare/256 1.27µs ± 0% 0.07µs ± 0% -94.14% (p=0.001 n=8+9) BytesCompare/512 2.51µs ± 0% 0.12µs ± 0% -95.26% (p=0.000 n=9+10) BytesCompare/1024 4.99µs ± 0% 0.21µs ± 0% -95.85% (p=0.000 n=8+10) BytesCompare/2048 9.94µs ± 0% 0.38µs ± 0% -96.14% (p=0.000 n=8+8) CompareBytesEqual 105ns ± 0% 64ns ± 0% -39.43% (p=0.000 n=10+9) CompareBytesToNil 34.8ns ± 1% 38.6ns ± 3% +11.01% (p=0.000 n=10+10) CompareBytesEmpty 33.6ns ± 3% 36.6ns ± 0% +8.77% (p=0.000 n=10+8) CompareBytesIdentical 29.7ns ± 0% 40.5ns ± 1% +36.45% (p=0.000 n=10+8) CompareBytesSameLength 69.1ns ± 0% 51.8ns ± 0% -25.04% (p=0.000 n=10+9) CompareBytesDifferentLength 69.8ns ± 0% 52.5ns ± 0% -24.79% (p=0.000 n=10+8) CompareBytesBigUnaligned 5.15ms ± 0% 2.19ms ± 0% -57.59% (p=0.000 n=9+9) CompareBytesBig 5.28ms ± 0% 0.28ms ± 0% -94.64% (p=0.000 n=8+8) CompareBytesBigIdentical 29.7ns ± 0% 36.9ns ± 2% +24.11% (p=0.000 n=8+10) name old speed new speed delta CompareBytesBigUnaligned 204MB/s ± 0% 480MB/s ± 0% +135.77% (p=0.000 n=9+9) CompareBytesBig 198MB/s ± 0% 3704MB/s ± 0% +1765.97% (p=0.000 n=8+8) CompareBytesBigIdentical 35.3TB/s ± 0% 28.4TB/s ± 2% -19.44% (p=0.000 n=8+10) Fixes #34549 Change-Id: I2ef29f13cdd4229745ac2d018bb53c76f2ff1209 Reviewed-on: https://go-review.googlesource.com/c/go/+/197557Reviewed-by:
-
Meng Zhuo authored
This change adds VLD1R, VLD2R, VLD3R, VLD4R Change-Id: Ie19e9ae02fdfc94b9344acde8c9938849efb0bf0 Reviewed-on: https://go-review.googlesource.com/c/go/+/181697 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Bryan C. Mills authored
This reverts CL 196661. Reason for revert: broke TestGdb* tests on mips64le, ppc64le, and s390x builders. Change-Id: I3b5c97c840819a0d407b943f7cf7e2d97f06042d Reviewed-on: https://go-review.googlesource.com/c/go/+/198697 Run-TryBot: Bryan C. Mills <bcmills@google.com> Reviewed-by:
Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Matthew Dempsky authored
During package initialization, the compiler tries to optimize: var A = "foo" var B = A into var A = "foo" var B = "foo" so that we can statically initialize both A and B and skip emitting dynamic initialization code to assign "B = A". However, this isn't safe in the presence of cmd/link's -X flag, which might overwrite an initialized string-typed variable at link time. In particular, if cmd/link changes A's static initialization, it won't know it also needs to change B's static initialization. To address this, this CL disables this optimization for string-typed variables. Fixes #34675. Change-Id: I1c18f3b855f6d7114aeb39f96aaaf1b452b88236 Reviewed-on: https://go-review.googlesource.com/c/go/+/198657 Run-TryBot: Matthew Dempsky <mdempsky@google.com> Reviewed-by:Cuong Manh Le <cuong.manhle.vn@gmail.com> Reviewed-by:
-
Jason A. Donenfeld authored
It's pointless to reach all ms via allgs, and doing so introduces a race, since the m member of a g can change underneath it. Instead iterate directly through the allm linked list. Updates: #31528 Updates: #34130 Change-Id: I34b88402b44339b0a5b4cd76eafd0ce6e43e2be1 Reviewed-on: https://go-review.googlesource.com/c/go/+/198417 Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Alex Brainman <alex.brainman@gmail.com> Reviewed-by:
Austin Clements <austin@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Jeremy Faller authored
Rather than use the pcln tables, walk progs while generating debug_lines. This code slightly increases the number of is_stmt toggles in the debug information due to a previous bug in how the pcline walking worked. (Previous versions of the line walking code wouldn't return the old_value, instead returning 0. This behavior might lose is_stmt toggles in the line table.) We suspected there would be a speedup with this change, but benchmarking hasn't shown this to be true (but has been noisy enough to not really show any large differences either way). These benchmarks are comparing non-prog walking code with this prog-walking code: name old time/op new time/op delta Template 321ms ± 4% 316ms ± 3% ~ (p=0.165 n=10+10) Unicode 146ms ± 5% 142ms ± 4% ~ (p=0.063 n=10+10) GoTypes 1.06s ± 2% 1.07s ± 2% ~ (p=0.280 n=10+10) Compiler 4.07s ± 1% 4.06s ± 1% ~ (p=0.549 n=10+9) SSA 12.6s ± 2% 12.7s ± 2% +1.27% (p=0.019 n=10+10) Flate 201ms ± 7% 202ms ± 4% ~ (p=0.436 n=10+10) GoParser 248ms ± 4% 250ms ± 2% ~ (p=0.356 n=9+10) Reflect 679ms ± 5% 678ms ± 4% ~ (p=0.971 n=10+10) Tar 281ms ± 2% 283ms ± 3% ~ (p=0.222 n=9+9) XML 381ms ± 3% 384ms ± 5% ~ (p=0.393 n=10+10) LinkCompiler 1.08s ± 2% 1.10s ± 2% +1.89% (p=0.009 n=10+10) ExternalLinkCompiler 2.23s ± 4% 2.23s ± 1% ~ (p=1.000 n=10+8) LinkWithoutDebugCompiler 654ms ± 4% 673ms ± 4% +2.94% (p=0.019 n=10+10) StdCmd 13.6s ± 2% 13.9s ± 1% +2.00% (p=0.000 n=10+10) name old user-time/op new user-time/op delta Template 582ms ±11% 575ms ±14% ~ (p=0.631 n=10+10) Unicode 431ms ±24% 390ms ±38% ~ (p=0.315 n=10+10) GoTypes 2.47s ±11% 2.51s ± 4% ~ (p=0.280 n=10+10) Compiler 9.09s ± 3% 9.04s ± 5% ~ (p=0.684 n=10+10) SSA 25.8s ± 4% 26.0s ± 3% ~ (p=0.529 n=10+10) Flate 318ms ±14% 322ms ±13% ~ (p=0.912 n=10+10) GoParser 386ms ± 6% 386ms ± 5% ~ (p=0.888 n=9+8) Reflect 1.42s ±20% 1.32s ±24% ~ (p=0.393 n=10+10) Tar 476ms ±19% 471ms ±25% ~ (p=1.000 n=10+10) XML 681ms ±25% 745ms ±21% ~ (p=0.143 n=10+10) LinkCompiler 1.75s ±13% 1.86s ±12% ~ (p=0.075 n=10+10) ExternalLinkCompiler 2.98s ±18% 3.41s ±13% +14.48% (p=0.003 n=10+10) LinkWithoutDebugCompiler 1.05s ±12% 1.08s ±16% ~ (p=0.739 n=10+10) name old alloc/op new alloc/op delta Template 36.4MB ± 0% 36.4MB ± 0% -0.11% (p=0.000 n=10+10) Unicode 28.6MB ± 0% 28.5MB ± 0% -0.06% (p=0.029 n=10+10) GoTypes 121MB ± 0% 121MB ± 0% -0.09% (p=0.000 n=9+9) Compiler 548MB ± 0% 547MB ± 0% -0.10% (p=0.000 n=10+10) SSA 1.87GB ± 0% 1.87GB ± 0% -0.13% (p=0.000 n=10+10) Flate 23.0MB ± 0% 22.9MB ± 0% -0.09% (p=0.000 n=9+10) GoParser 27.9MB ± 0% 27.8MB ± 0% -0.12% (p=0.000 n=10+10) Reflect 77.7MB ± 0% 77.6MB ± 0% -0.12% (p=0.000 n=8+10) Tar 34.5MB ± 0% 34.5MB ± 0% -0.07% (p=0.003 n=10+10) XML 44.4MB ± 0% 44.4MB ± 0% -0.07% (p=0.000 n=10+10) LinkCompiler 236MB ± 0% 240MB ± 0% +1.72% (p=0.000 n=10+10) ExternalLinkCompiler 246MB ± 0% 254MB ± 0% +3.02% (p=0.000 n=10+10) LinkWithoutDebugCompiler 159MB ± 0% 164MB ± 0% +3.35% (p=0.000 n=10+10) name old allocs/op new allocs/op delta Template 372k ± 0% 371k ± 0% -0.23% (p=0.000 n=10+10) Unicode 340k ± 0% 340k ± 0% -0.05% (p=0.000 n=10+10) GoTypes 1.33M ± 0% 1.32M ± 0% -0.20% (p=0.000 n=9+10) Compiler 5.37M ± 0% 5.36M ± 0% -0.17% (p=0.000 n=10+10) SSA 17.9M ± 0% 17.9M ± 0% -0.15% (p=0.000 n=10+10) Flate 234k ± 0% 233k ± 0% -0.24% (p=0.000 n=9+10) GoParser 309k ± 0% 309k ± 0% -0.21% (p=0.000 n=10+10) Reflect 969k ± 0% 966k ± 0% -0.30% (p=0.000 n=9+10) Tar 348k ± 0% 347k ± 0% -0.22% (p=0.000 n=10+9) XML 426k ± 0% 425k ± 0% -0.15% (p=0.000 n=9+10) LinkCompiler 638k ± 0% 637k ± 0% -0.07% (p=0.000 n=10+10) ExternalLinkCompiler 1.69M ± 0% 1.69M ± 0% -0.05% (p=0.000 n=10+10) LinkWithoutDebugCompiler 222k ± 0% 221k ± 0% -0.03% (p=0.007 n=10+9) name old object-bytes new object-bytes delta Template 559kB ± 0% 560kB ± 0% +0.23% (p=0.000 n=10+10) Unicode 216kB ± 0% 216kB ± 0% +0.01% (p=0.000 n=10+10) GoTypes 2.03MB ± 0% 2.04MB ± 0% +0.31% (p=0.000 n=10+10) Compiler 8.07MB ± 0% 8.10MB ± 0% +0.35% (p=0.000 n=10+10) SSA 27.1MB ± 0% 27.3MB ± 0% +0.72% (p=0.000 n=10+10) Flate 343kB ± 0% 344kB ± 0% +0.22% (p=0.000 n=10+10) GoParser 441kB ± 0% 442kB ± 0% +0.34% (p=0.000 n=10+10) Reflect 1.36MB ± 0% 1.36MB ± 0% +0.23% (p=0.000 n=10+10) Tar 487kB ± 0% 488kB ± 0% +0.21% (p=0.000 n=10+10) XML 632kB ± 0% 634kB ± 0% +0.35% (p=0.000 n=10+10) name old export-bytes new export-bytes delta Template 18.5kB ± 0% 18.5kB ± 0% ~ (all equal) Unicode 7.92kB ± 0% 7.92kB ± 0% ~ (all equal) GoTypes 35.0kB ± 0% 35.0kB ± 0% ~ (all equal) Compiler 109kB ± 0% 109kB ± 0% +0.00% (p=0.000 n=10+10) SSA 137kB ± 0% 137kB ± 0% +0.00% (p=0.000 n=10+10) Flate 4.89kB ± 0% 4.89kB ± 0% ~ (all equal) GoParser 8.49kB ± 0% 8.49kB ± 0% ~ (all equal) Reflect 11.4kB ± 0% 11.4kB ± 0% ~ (all equal) Tar 10.5kB ± 0% 10.5kB ± 0% ~ (all equal) XML 16.7kB ± 0% 16.7kB ± 0% ~ (all equal) name old text-bytes new text-bytes delta HelloSize 760kB ± 0% 760kB ± 0% ~ (all equal) CmdGoSize 10.8MB ± 0% 10.8MB ± 0% ~ (all equal) name old data-bytes new data-bytes delta HelloSize 10.7kB ± 0% 10.7kB ± 0% ~ (all equal) CmdGoSize 312kB ± 0% 312kB ± 0% ~ (all equal) name old bss-bytes new bss-bytes delta HelloSize 122kB ± 0% 122kB ± 0% ~ (all equal) CmdGoSize 146kB ± 0% 146kB ± 0% ~ (all equal) name old exe-bytes new exe-bytes delta HelloSize 1.13MB ± 0% 1.13MB ± 0% ~ (all equal) CmdGoSize 15.0MB ± 0% 15.1MB ± 0% +0.22% (p=0.000 n=10+10) Change-Id: If6e0982cd1398062a88e6c0c7513e141f9503531 Reviewed-on: https://go-review.googlesource.com/c/go/+/196661 Run-TryBot: Jeremy Faller <jeremy@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Tobias Klauser authored
Update the expected data to fix the longtest builder. Updates #28856 Change-Id: I7fb6ee72e8469d974561b4b4057f40142f5b3654 Reviewed-on: https://go-review.googlesource.com/c/go/+/198557 Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Dmitri Shuralyov <dmitshur@golang.org>
-
Utkarsh Dixit authored
Change-Id: If657dab2df19d3b0c2ff9869a64e3a97446646ac GitHub-Last-Rev: b921b01cf4e5bcbbc65fb1fb0b5cd836bda73596 GitHub-Pull-Request: golang/go#34637 Reviewed-on: https://go-review.googlesource.com/c/go/+/198041Reviewed-by:
-
Robert Griesemer authored
Fixes #33753. Updates #31747. Change-Id: Icc42b23405ead4f7f17b0ffa3611405454b6b271 Reviewed-on: https://go-review.googlesource.com/c/go/+/198491 Run-TryBot: Robert Griesemer <gri@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Matthew Dempsky authored
Prepared with gofmt -r. Change-Id: Ifea325c209d800b5692d318955930b10debb548b Reviewed-on: https://go-review.googlesource.com/c/go/+/198494 Run-TryBot: Matthew Dempsky <mdempsky@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ariel Mashraki authored
This CL is a follow up for 198080. Added a private writeTo method to the Node interface, in order to use the same builder for printing all nodes in the tree. Benchmark output against master: benchmark old ns/op new ns/op delta BenchmarkParseLarge-8 24594994 25292054 +2.83% BenchmarkVariableString-8 117 118 +0.85% BenchmarkListString-8 10475 3353 -67.99% benchmark old allocs new allocs delta BenchmarkVariableString-8 3 3 +0.00% BenchmarkListString-8 149 31 -79.19% benchmark old bytes new bytes delta BenchmarkVariableString-8 72 72 +0.00% BenchmarkListString-8 5698 1608 -71.78% Change-Id: I2b1cf07cda65c1b80083fb99671289423700feba Reviewed-on: https://go-review.googlesource.com/c/go/+/198278Reviewed-by:
Rob Pike <r@golang.org> Run-TryBot: Rob Pike <r@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
- 02 Oct, 2019 10 commits
-
-
Michael Hendricks authored
If a request for a PTR record returned a response with a non-PTR answer, goLookupPTR would loop forever. Skipping non-PTR answers guarantees progress through the DNS response. Fixes #34660 Change-Id: I56f9d21e5342d07e7d843d253267e93a29707904 Reviewed-on: https://go-review.googlesource.com/c/go/+/198460 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Egon Elbre authored
Currently cgoCheckPointer is only used with one optional argument. Using a slice for the optional arguments is quite expensive, hence replace it with a single interface{}. This results in ~30% improvement. When checking struct fields, they quite often end up being without pointers. Check this before calling cgoCheckPointer, which results in additional ~20% improvement. Inline some p == nil checks from cgoIsGoPointer which gives additional ~15% improvement. All of this translates to: name old time/op new time/op delta CgoCall/add-int-32 46.9ns ± 1% 46.6ns ± 1% -0.75% (p=0.000 n=18+20) CgoCall/one-pointer-32 143ns ± 1% 87ns ± 1% -38.96% (p=0.000 n=20+20) CgoCall/eight-pointers-32 767ns ± 0% 327ns ± 1% -57.30% (p=0.000 n=18+16) CgoCall/eight-pointers-nil-32 110ns ± 1% 89ns ± 2% -19.10% (p=0.000 n=19+19) CgoCall/eight-pointers-array-32 5.09µs ± 1% 3.56µs ± 2% -30.09% (p=0.000 n=19+19) CgoCall/eight-pointers-slice-32 3.92µs ± 0% 2.57µs ± 2% -34.48% (p=0.000 n=20+20) Change-Id: I2aa9f5ae8962a9a41a7fb1db0c300893109d0d75 Reviewed-on: https://go-review.googlesource.com/c/go/+/198081 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by: -
W. Trevor King authored
Because errors like: certificate has expired or is not yet valid make it difficult to distinguish between "certificate has expired" and "my local clock is skewed". Including our idea of the local time makes it easier to identify the clock-skew case, and including the violated certificate constraint saves folks the trouble of looking it up in the target certificate. Change-Id: I52e0e71705ee36f6afde1bb5a47b9b42ed5ead5b GitHub-Last-Rev: db2ca4029c1e0b17363772d9824e3042d5501d48 GitHub-Pull-Request: golang/go#34646 Reviewed-on: https://go-review.googlesource.com/c/go/+/198046Reviewed-by: -
Dan Scales authored
Add a test that causes generation of arch.ZeroRange calls of various sizes 8-136 bytes in the compiler. This is to test that ZeroRanges of various sizes actually compile on different architectures, but is not testing runtime correctness (which is hard to do). Updates #34604 Change-Id: I4131eb86669bdfe8d4e36f4ae5c2a7b069abd6c4 Reviewed-on: https://go-review.googlesource.com/c/go/+/198045 Run-TryBot: Dan Scales <danscales@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Brad Fitzpatrick authored
Fixes #34640 Change-Id: I4a6c9414fe369cd5e9915472331c4bd8a21d8b0e Reviewed-on: https://go-review.googlesource.com/c/go/+/198457Reviewed-by:
-
Ruixin(Peter) Bao authored
SSA rule have already been added previously to intrisinfy Mul/Mul64 on s390x. In this CL, we want to let mulWW use that SSA rule as well. Also removed an extra line for formatting. Benchmarks: QuoRem-18 3.59µs ±15% 2.94µs ± 3% -18.06% (p=0.000 n=8+8) ModSqrt225_Tonelli-18 806µs ± 0% 800µs ± 0% -0.85% (p=0.000 n=7+8) ModSqrt225_3Mod4-18 245µs ± 1% 243µs ± 0% -0.81% (p=0.001 n=8+8) ModSqrt231_Tonelli-18 837µs ± 0% 834µs ± 1% -0.36% (p=0.028 n=8+8) ModSqrt231_5Mod8-18 282µs ± 0% 280µs ± 0% -0.76% (p=0.000 n=8+8) Sqrt-18 45.8µs ± 2% 38.6µs ± 0% -15.63% (p=0.000 n=8+8) IntSqr/1-18 19.1ns ± 0% 13.1ns ± 0% -31.41% (p=0.000 n=8+8) IntSqr/2-18 48.3ns ± 2% 48.2ns ± 0% ~ (p=0.094 n=8+8) IntSqr/3-18 70.5ns ± 1% 70.7ns ± 0% ~ (p=0.428 n=8+8) IntSqr/5-18 119ns ± 1% 118ns ± 0% -1.02% (p=0.000 n=7+8) IntSqr/8-18 215ns ± 1% 215ns ± 0% ~ (p=0.320 n=8+7) IntSqr/10-18 302ns ± 1% 301ns ± 0% ~ (p=0.148 n=8+7) IntSqr/20-18 952ns ± 1% 807ns ± 0% -15.28% (p=0.000 n=8+8) IntSqr/30-18 1.74µs ± 0% 1.53µs ± 0% -11.93% (p=0.000 n=8+8) IntSqr/50-18 3.91µs ± 0% 3.57µs ± 0% -8.64% (p=0.000 n=7+8) IntSqr/80-18 8.66µs ± 1% 8.11µs ± 0% -6.39% (p=0.000 n=8+8) IntSqr/100-18 12.8µs ± 0% 12.2µs ± 0% -5.19% (p=0.000 n=8+8) IntSqr/200-18 46.0µs ± 0% 44.5µs ± 0% -3.06% (p=0.000 n=8+8) IntSqr/300-18 81.4µs ± 0% 78.4µs ± 0% -3.71% (p=0.000 n=7+8) IntSqr/500-18 212µs ± 1% 206µs ± 0% -2.66% (p=0.000 n=8+8) IntSqr/800-18 419µs ± 1% 406µs ± 0% -3.07% (p=0.000 n=8+8) IntSqr/1000-18 635µs ± 0% 621µs ± 0% -2.13% (p=0.000 n=8+8) Change-Id: Ib097857186932b902601ab087cbeff3fc9555c3e Reviewed-on: https://go-review.googlesource.com/c/go/+/197639 Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Keith Randall <khr@golang.org>
-
Michael Munday authored
Control values are used to choose which successor of a block is jumped to. Typically a control value takes the form of a 'flags' value that represents the result of a comparison. Some architectures however use a variable in a register as a control value. Up until now we have managed with a single control value per block. However some architectures (e.g. s390x and riscv64) have combined compare-and-branch instructions that take two variables in registers as parameters. To generate these instructions we need to support 2 control values per block. This CL allows up to 2 control values to be used in a block in order to support the addition of compare-and-branch instructions. I have implemented s390x compare-and-branch instructions in a different CL. Passes toolstash-check -all. Results of compilebench: name old time/op new time/op delta Template 208ms ± 1% 209ms ± 1% ~ (p=0.289 n=20+20) Unicode 83.7ms ± 1% 83.3ms ± 3% -0.49% (p=0.017 n=18+18) GoTypes 748ms ± 1% 748ms ± 0% ~ (p=0.460 n=20+18) Compiler 3.47s ± 1% 3.48s ± 1% ~ (p=0.070 n=19+18) SSA 11.5s ± 1% 11.7s ± 1% +1.64% (p=0.000 n=19+18) Flate 130ms ± 1% 130ms ± 1% ~ (p=0.588 n=19+20) GoParser 160ms ± 1% 161ms ± 1% ~ (p=0.211 n=20+20) Reflect 465ms ± 1% 467ms ± 1% +0.42% (p=0.007 n=20+20) Tar 184ms ± 1% 185ms ± 2% ~ (p=0.087 n=18+20) XML 253ms ± 1% 253ms ± 1% ~ (p=0.377 n=20+18) LinkCompiler 769ms ± 2% 774ms ± 2% ~ (p=0.070 n=19+19) ExternalLinkCompiler 3.59s ±11% 3.68s ± 6% ~ (p=0.072 n=20+20) LinkWithoutDebugCompiler 446ms ± 5% 454ms ± 3% +1.79% (p=0.002 n=19+20) StdCmd 26.0s ± 2% 26.0s ± 2% ~ (p=0.799 n=20+20) name old user-time/op new user-time/op delta Template 238ms ± 5% 240ms ± 5% ~ (p=0.142 n=20+20) Unicode 105ms ±11% 106ms ±10% ~ (p=0.512 n=20+20) GoTypes 876ms ± 2% 873ms ± 4% ~ (p=0.647 n=20+19) Compiler 4.17s ± 2% 4.19s ± 1% ~ (p=0.093 n=20+18) SSA 13.9s ± 1% 14.1s ± 1% +1.45% (p=0.000 n=18+18) Flate 145ms ±13% 146ms ± 5% ~ (p=0.851 n=20+18) GoParser 185ms ± 5% 188ms ± 7% ~ (p=0.174 n=20+20) Reflect 534ms ± 3% 538ms ± 2% ~ (p=0.105 n=20+18) Tar 215ms ± 4% 211ms ± 9% ~ (p=0.079 n=19+20) XML 295ms ± 6% 295ms ± 5% ~ (p=0.968 n=20+20) LinkCompiler 832ms ± 4% 837ms ± 7% ~ (p=0.707 n=17+20) ExternalLinkCompiler 1.58s ± 8% 1.60s ± 4% ~ (p=0.296 n=20+19) LinkWithoutDebugCompiler 478ms ±12% 489ms ±10% ~ (p=0.429 n=20+20) name old object-bytes new object-bytes delta Template 559kB ± 0% 559kB ± 0% ~ (all equal) Unicode 216kB ± 0% 216kB ± 0% ~ (all equal) GoTypes 2.03MB ± 0% 2.03MB ± 0% ~ (all equal) Compiler 8.07MB ± 0% 8.07MB ± 0% -0.06% (p=0.000 n=20+20) SSA 27.1MB ± 0% 27.3MB ± 0% +0.89% (p=0.000 n=20+20) Flate 343kB ± 0% 343kB ± 0% ~ (all equal) GoParser 441kB ± 0% 441kB ± 0% ~ (all equal) Reflect 1.36MB ± 0% 1.36MB ± 0% ~ (all equal) Tar 487kB ± 0% 487kB ± 0% ~ (all equal) XML 632kB ± 0% 632kB ± 0% ~ (all equal) name old export-bytes new export-bytes delta Template 18.5kB ± 0% 18.5kB ± 0% ~ (all equal) Unicode 7.92kB ± 0% 7.92kB ± 0% ~ (all equal) GoTypes 35.0kB ± 0% 35.0kB ± 0% ~ (all equal) Compiler 109kB ± 0% 110kB ± 0% +0.72% (p=0.000 n=20+20) SSA 137kB ± 0% 138kB ± 0% +0.58% (p=0.000 n=20+20) Flate 4.89kB ± 0% 4.89kB ± 0% ~ (all equal) GoParser 8.49kB ± 0% 8.49kB ± 0% ~ (all equal) Reflect 11.4kB ± 0% 11.4kB ± 0% ~ (all equal) Tar 10.5kB ± 0% 10.5kB ± 0% ~ (all equal) XML 16.7kB ± 0% 16.7kB ± 0% ~ (all equal) name old text-bytes new text-bytes delta HelloSize 761kB ± 0% 761kB ± 0% ~ (all equal) CmdGoSize 10.8MB ± 0% 10.8MB ± 0% ~ (all equal) name old data-bytes new data-bytes delta HelloSize 10.7kB ± 0% 10.7kB ± 0% ~ (all equal) CmdGoSize 312kB ± 0% 312kB ± 0% ~ (all equal) name old bss-bytes new bss-bytes delta HelloSize 122kB ± 0% 122kB ± 0% ~ (all equal) CmdGoSize 146kB ± 0% 146kB ± 0% ~ (all equal) name old exe-bytes new exe-bytes delta HelloSize 1.13MB ± 0% 1.13MB ± 0% ~ (all equal) CmdGoSize 15.1MB ± 0% 15.1MB ± 0% ~ (all equal) Change-Id: I3cc2f9829a109543d9a68be4a21775d2d3e9801f Reviewed-on: https://go-review.googlesource.com/c/go/+/196557 Run-TryBot: Michael Munday <mike.munday@ibm.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Daniel Martí <mvdan@mvdan.cc> Reviewed-by:
-
Jason A. Donenfeld authored
CL 196846 implemented memory mapped output files but forgot to provide an implementation for Msync. This rectifies that with a simple call to FlushViewOfFile. Change-Id: I5aebef9baf3a2a6ad54ceda096952a5d7d660bfe Reviewed-on: https://go-review.googlesource.com/c/go/+/198418 Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Kyohei Kadota authored
TestEnvOverride sets PATH to /wibble before executing a CGI. So customized Perl that is starting with '#!/usr/bin/env bash' will fail because /usr/bin/env can't lookup bash. Fixes #27790 Change-Id: I25e433061a7ff9da8c86429e934418fc15f12f90 Reviewed-on: https://go-review.googlesource.com/c/go/+/196845Reviewed-by:
-
Emmanuel T Odeke authored
By lazily starting the signal watch loop only on Notify, we are able to have deadlock detection even when "os/signal" is imported. Thanks to Ian Lance Taylor for the solution and discussion. With this change in, fix a runtime gorountine count test that assumed that os/signal.init would unconditionally start the signal watching goroutine, but alas no more. Fixes #21576. Change-Id: I6eecf82a887f59f2ec8897f1bcd67ca311ca42ff Reviewed-on: https://go-review.googlesource.com/c/go/+/101036 Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
- 01 Oct, 2019 8 commits
-
-
Bryan C. Mills authored
In #33848, we propose to use 'go 1.14' in the go.mod file to enable new default behavior. That means that 'go mod init' needs to start generating that directive by default, which requires the presence of the updated version tag in the build environment. Updates #33848 Change-Id: I9f3b8845fdfd843fd76de32f4b55d8f765d691de Reviewed-on: https://go-review.googlesource.com/c/go/+/198318 Run-TryBot: Bryan C. Mills <bcmills@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ariel Mashraki authored
nextNonSpace has an identical code except the call to backup at the end. Change-Id: Iefa5b13950007da38323a800fb6b0ce3d436254b Reviewed-on: https://go-review.googlesource.com/c/go/+/198277 Run-TryBot: Rob Pike <r@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ariel Mashraki authored
This CL is a continuation of 198078. Benchmark output: benchmark old ns/op new ns/op delta BenchmarkParseLarge-8 24759165 24516563 -0.98% BenchmarkVariableString-8 115 115 +0.00% BenchmarkListString-8 924 680 -26.41% benchmark old allocs new allocs delta BenchmarkVariableString-8 3 3 +0.00% BenchmarkListString-8 14 13 -7.14% benchmark old bytes new bytes delta BenchmarkVariableString-8 72 72 +0.00% BenchmarkListString-8 512 424 -17.19% Change-Id: I9ec48fe4832437c556a5fa94d4cbf6e29e28d944 Reviewed-on: https://go-review.googlesource.com/c/go/+/198080Reviewed-by:
Emmanuel Odeke <emm.odeke@gmail.com> Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Clément Chigot authored
ADUFFCOPY and ADUFFZERO instructions weren't handled by rewriteToUseTOC. These instructions are considered as a simple branch except with -dynlink where they become an indirect call. Fixes #34604 Change-Id: I16ca6a152164966fb9cbf792219a8a39aad2b53b Reviewed-on: https://go-review.googlesource.com/c/go/+/197842Reviewed-by:
-
Nuno Cruces authored
Change applies to sendFile. This is already done for sendContent. Change-Id: If43d9ab99e6e66a1363b08e0bdcceb57df1f855c GitHub-Last-Rev: 1c47620a09a6f5e2b3d777fadaad6e0189de4af5 GitHub-Pull-Request: golang/go#34631 Reviewed-on: https://go-review.googlesource.com/c/go/+/198139Reviewed-by:
-
Andrew Bonventre authored
This reverts CL 186417. Reason for revert: Broke darwin (10_14), linux (ppc), aix (ppc) Updates #33139 Change-Id: I8bf3c817a96a0e57e45754a097cea7062b2fcdfd Reviewed-on: https://go-review.googlesource.com/c/go/+/198177 Run-TryBot: Andrew Bonventre <andybons@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Alex Brainman authored
CL 170738 used mmap for writing most of the output file content. This change implements similar functionality for Windows. The output of compilebench -count=5 command before and after this change name old time/op new time/op delta Template 254ms ±14% 239ms ±10% ~ (p=0.222 n=5+5) Unicode 119ms ±14% 113ms ±12% ~ (p=0.421 n=5+5) GoTypes 892ms ±23% 850ms ± 1% ~ (p=0.841 n=5+5) Compiler 3.86s ± 2% 3.82s ± 1% ~ (p=0.222 n=5+5) SSA 12.6s ± 1% 12.6s ± 1% ~ (p=0.095 n=5+5) Flate 162ms ±18% 149ms ± 1% -7.91% (p=0.016 n=5+5) GoParser 199ms ±12% 184ms ± 1% ~ (p=0.056 n=5+5) Reflect 524ms ±13% 507ms ± 3% ~ (p=0.421 n=5+5) Tar 207ms ± 7% 198ms ± 0% -4.58% (p=0.016 n=5+4) XML 305ms ± 6% 299ms ± 5% ~ (p=0.690 n=5+5) LinkCompiler 1.14s ±11% 1.14s ± 3% ~ (p=0.222 n=5+5) ExternalLinkCompiler 2.80s ± 5% 2.92s ±13% ~ (p=0.222 n=5+5) LinkWithoutDebugCompiler 727ms ± 2% 750ms ± 7% ~ (p=0.151 n=5+5) StdCmd 44.0s ± 8% 43.3s ± 2% ~ (p=1.000 n=5+5) name old user-time/op new user-time/op delta Template 300ms ±27% 259ms ±34% ~ (p=0.341 n=5+5) Unicode 134ms ±51% 144ms ±67% ~ (p=0.548 n=5+5) GoTypes 1.05s ±10% 1.03s ± 6% ~ (p=0.968 n=5+5) Compiler 5.01s ± 3% 4.88s ± 3% ~ (p=0.286 n=5+5) SSA 16.8s ± 1% 16.7s ± 1% -0.95% (p=0.008 n=5+5) Flate 178ms ±67% 181ms ±38% ~ (p=0.849 n=5+5) GoParser 231ms ±32% 219ms ±21% ~ (p=0.810 n=5+5) Reflect 634ms ±33% 650ms ± 6% ~ (p=0.135 n=5+5) Tar 219ms ±36% 231ms ±19% ~ (p=0.905 n=5+5) XML 378ms ±20% 366ms ±23% ~ (p=0.913 n=5+5) LinkCompiler 1.34s ±15% 1.32s ±10% ~ (p=0.730 n=5+5) ExternalLinkCompiler 1.22s ±13% 1.18s ±15% ~ (p=0.873 n=5+5) LinkWithoutDebugCompiler 847ms ±13% 841ms ±21% ~ (p=0.667 n=5+5) name old text-bytes new text-bytes delta HelloSize 767kB ± 0% 767kB ± 0% ~ (all equal) CmdGoSize 10.6MB ± 0% 10.6MB ± 0% ~ (all equal) name old data-bytes new data-bytes delta HelloSize 10.1kB ± 0% 10.1kB ± 0% ~ (all equal) CmdGoSize 310kB ± 0% 310kB ± 0% ~ (all equal) name old bss-bytes new bss-bytes delta HelloSize 0.00B 0.00B ~ (all equal) CmdGoSize 0.00B 0.00B ~ (all equal) name old exe-bytes new exe-bytes delta HelloSize 1.10MB ± 0% 1.10MB ± 0% ~ (all equal) CmdGoSize 14.7MB ± 0% 14.7MB ± 0% ~ (all equal) Change-Id: I653f63213b9cc8a4b05f71938e34b5d53b05e3f5 Reviewed-on: https://go-review.googlesource.com/c/go/+/196846 Run-TryBot: Alex Brainman <alex.brainman@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Ariel Mashraki authored
As mentioned in godoc, strings.Builder is more efficient for concatenating and building strings. Running a simple bench test on VariableNode.String() gives: benchmark old ns/op new ns/op delta BenchmarkParseLarge-8 25676831 24453285 -4.77% BenchmarkVariableString-8 296 115 -61.15% benchmark old allocs new allocs delta BenchmarkVariableString-8 8 3 -62.50% benchmark old bytes new bytes delta BenchmarkVariableString-8 112 72 -35.71% Change-Id: I13c9340080738fcad1edeed859d33ba608e4b05a Reviewed-on: https://go-review.googlesource.com/c/go/+/198078Reviewed-by:
-
