Skip to content

G
go
Switch branch/tag
  1. 05 Jul, 2019 3 commits
  3. 03 Jul, 2019 6 commits
  5. 02 Jul, 2019 3 commits
  7. 01 Jul, 2019 2 commits
  9. 30 Jun, 2019 1 commit
    • Ian Lance Taylor's avatar
      runtime: use a pipe to wake up signal_recv on Darwin · c485e8b5
      Ian Lance Taylor authored 
      The implementation of semaphores, and therefore notes, used on Darwin
is not async-signal-safe. The runtime has one case where a note needs
to be woken up from a signal handler: the call to notewakeup in sigsend.
That notewakeup call is only called on a single note, and it doesn't
need the full functionality of notes: nothing ever does a timed wait on it.
So change that one note to use a different implementation on Darwin,
based on a pipe. This lets the wakeup code use the write call, which is
async-signal-safe.

Fixes #31264

Change-Id: If705072d7a961dd908ea9d639c8d12b222c64806
Reviewed-on: https://go-review.googlesource.com/c/go/+/184169
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarRuss Cox <rsc@golang.org>
      c485e8b5
  11. 29 Jun, 2019 1 commit
    • Russ Cox's avatar
      crypto/tls: deflake localPipe in tests · 623d653d
      Russ Cox authored 
      The localPipe implementation assumes that every successful net.Dial
results in exactly one successful listener.Accept. I don't believe this
is guaranteed by essentially any operating system. For this test, we're
seeing flakes on dragonfly (#29583).

But see also #19519, flakes due to the same assumption on FreeBSD
and macOS in package net's own tests.

This CL rewrites localPipe to try a few times to get a matching pair
of connections on the dial and accept side.

Fixes #29583.

Change-Id: Idb045b18c404eae457f091df20456c5ae879a291
Reviewed-on: https://go-review.googlesource.com/c/go/+/184157
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      623d653d
  13. 28 Jun, 2019 3 commits
    • Russ Cox's avatar
      net: deflake TestVariousDeadlines · 2e0cd2ae
      Russ Cox authored 
      TestVariousDeadlines starts a client and server.
The client dials the server, sets a timeout on the connection,
reads from it, gets a timeout error, closes the connection.
The server writes an infinite stream of a's to each connection
it accepts.

The test was trying to run these in lockstep:
run a client dial+read+timeout+close,
wait for server to accept+write+error out on write to closed connection,
repeat.

On FreeBSD 11.2 and less frequently on macOS we see
the test timeout waiting for the server to do its half of
the lockstep dance.

I believe the problem is that the client can do its step
of the dance with such a short timeout that the read,
timeout, and close happens before the server ever returns
from the accept(2) system call. For the purposes of testing
the client-side read timeout, this is fine. But I suspect
that under some circumstances, the "TCP-accepted"
connection does not translate into a "socket-layer-accepted"
connection that triggers a return from accept(2).
That is, the Go server never sees the connection at all.
And the test sits there waiting for it to acknowledge
being done with a connection it never started with.

Fix the problem by not trying to lockstep with the server.

This definitely fixes the flake, since the specific line that
was calling t.Fatal is now deleted.

This exposes a different flake, seen on a trybot run for an
early version of this CL, in which the client's io.Copy does
not stop within the time allotted. The problem now is that
there is no guarantee that a read beyond the deadline with
available data returns an error instead of the available data,
yet the test assumes this guarantee, and in fact the opposite
is usually true - we don't bother checking the deadline unless
the read needs to block. That is, deadlines don't cut off a
flood of available data, yet this test thinks they do.

This CL therefore also changes the server not to send an
infinite flood of data - don't send any data at all - so that
the read deadline is guaranteed to be exercised.

Fixes #19519.

Change-Id: I58057c3ed94ac2aebab140ea597f317abae6e65e
Reviewed-on: https://go-review.googlesource.com/c/go/+/184137
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      2e0cd2ae
    • Russ Cox's avatar
      runtime: fix pprof cpu profile corruption on arm/mips/mipsle · 91c385b3
      Russ Cox authored 
      CL 42652 changed the profile handler for mips/mipsle to
avoid recording a profile when in atomic functions, for fear
of interrupting the 32-bit simulation of a 64-bit atomic with
a lock. The profile logger itself uses 64-bit atomics and might
deadlock (#20146).

The change was to accumulate a count of dropped profile events
and then send the count when the next ordinary event was sent:

	if prof.hz != 0 {
	+	if (GOARCH == "mips" || GOARCH == "mipsle") && lostAtomic64Count > 0 {
	+		cpuprof.addLostAtomic64(lostAtomic64Count)
	+		lostAtomic64Count = 0
	+	}
 		cpuprof.add(gp, stk[:n])
 	}

CL 117057 extended this behavior to include GOARCH == "arm".

Unfortunately, the inserted cpuprof.addLostAtomic64 differs from
the original cpuprof.add in that it neglects to acquire the lock
protecting the profile buffer.

This has caused a steady stream of flakes on the arm builders
for the past 12 months, ever since CL 117057 landed.

This CL moves the lostAtomic count into the profile buffer and
then lets the existing addExtra calls take care of it, instead of
duplicating the locking logic.

Fixes #24991.

Change-Id: Ia386c40034fcf46b31f080ce18f2420df4bb8004
Reviewed-on: https://go-review.googlesource.com/c/go/+/184164
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
      91c385b3
    • Dmitri Shuralyov's avatar
      cmd/doc: provide working directory to build.Import calls · 3b040b7e
      Dmitri Shuralyov authored 
      The current cmd/doc implementation uses go/build.Import in a few
places to check whether a package is findable and importable.
go/build has limited support for finding packages in modules,
but to do so, build.Import requires knowing the source directory
to use when performing the lookup (so it can find the go.mod file).
Otherwise, it only looks inside the GOPATH workspace.

Start passing the current working directory to build.Import calls,
so that it can correctly look for packages in modules when in cmd/doc
is executed in module mode.

Before this change, cmd/doc in module mode could mistakenly find and
use a package in the GOPATH workspace, instead of the current module.

Since the result of os.Getwd is needed in even more places, assign it
to a local variable in parseArgs now.

Fixes #28992
Updates #26504

Change-Id: I7571618e18420d2d3b3890cc69ade2d97b1962bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/183991
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      3b040b7e
  15. 27 Jun, 2019 7 commits
  17. 26 Jun, 2019 14 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7