Merge tag 'imx-dt64-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree for 6.10:

- New board support: Emcraft Systems NavQ+ Kit, Toradex Colibri iMX8DX,
  and S32G-VNP-RDB3 board.
- A series from Alexander Stein that adds empty DSI output endpoint to
  simplify DSI connection description at board level.
- Add pinmux and I2C GPIOs to support bus recovery for LX2160A.
- Add cm40 subsystem description for i.MX8 SoCs.
- A series from Frank Li that adds ADC, LPSPI and FlexSPI devices for
  imx8qm-mek board.
- Add audio devices ASRC, ESAI, SPDIF and SAI for i.MX8QXP and correct
  audio LPCG index.
- A couple of changes from Ghennadi Procopciuc that add SCMI firmware
  and uSDHC nodes for S32G SoC.
- A couple of imx8mp-msc-sm2s updates from Ian Ray improving I2C pad
  drive strength and adding SDA/SCL GPIOs for I2C devices.
- Add PCA9451A PMIC and PCF2131 RTC support for imx93-11x11-evk board.
- A series from Lucas Stach to enable HDMI display support for i.MX8MP.
- A series from Peng Fan to improve i.MX93 support for LPI2C, LPSPI, FEC
  and eQoS.
- A couple of LS1028A changes from Rob Herring to improve PCI device
  description.
- A series from Shengjiu Wang adding HDMI and PDM mic sound support for
  imx8mp-evk board.
- A number of i.MX8M Venice device improvements from Stefan Eichenberger,
  Tim Harvey and Vitor Soares.
- A series from Xu Yang that enables USB support for imx8ulp-evk and
  imx93-11x11-evk board.
- Other small and random updates on various boards.

* tag 'imx-dt64-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (78 commits)
  arm64: dts: imx93-11x11-evk: add RTC PCF2131 support
  arm64: dts: imx93-11x11-evk: add reset gpios for ethernet PHYs
  arm64: dts: imx93-11x11-evk: add sleep pinctrl for sdhc2
  arm64: dts: imx93-11x11-evk: add different usdhc pinctrl for different timing usage
  arm64: dts: imx93-11x11-evk: add sleep pinctrl for eqos and fec
  arm64: dts: imx93-11x11-evk: update resource table address
  arm64: dts: imx93: add nvmem property for eqos
  arm64: dts: imx93: add nvmem property for fec1
  arm64: dts: imx93: assign usdhc[1..3] root clock to 400MHz
  arm64: dts: imx93: add dma support for lpspi[1..8]
  arm64: dts: imx93: add dma support for lpi2c[1..8]
  arm64: dts: imx93: use FSL_EDMA_RX for rx channel
  arm64: dts: freescale: ls1028a: Add standard PCI device compatible strings to ENETC
  arm64: dts: freescale: ls1028a: Fix embedded PCI interrupt mapping
  arm64: dts: imx8qxp-mek: add cm40_i2c, wm8960 and sai[0,1,4,5]
  arm64: dts: imx8mp: Align both CSI2 pixel clock
  arm64: dts: freescale: imx8m[mp]-verdin: Update audio card name
  arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL
  arm64: dts: imx8ulp: add caam jr
  arm64: dts: imx8mp-msc-sm2s: Add i2c{1,6} sda-/scl-gpios
  ...

Link: https://lore.kernel.org/r/20240428121247.10370-4-shawnguo2@yeah.netSigned-off-by: Arnd Bergmann <arnd@arndb.de>