Commit 029e2151 authored by Rob Herring's avatar Rob Herring Committed by Bjorn Helgaas

PCI: xilinx: Convert to use generic config accessors

Convert the Xilinx host PCI driver to use the generic config access
functions.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: linux-arm-kernel@lists.infradead.org
parent 350f8be5
......@@ -189,7 +189,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
}
/**
* xilinx_pcie_config_base - Get configuration base
* xilinx_pcie_map_bus - Get configuration base
* @bus: PCI Bus structure
* @devfn: Device/function
* @where: Offset from base
......@@ -197,96 +197,26 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
* Return: Base address of the configuration space needed to be
* accessed.
*/
static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus,
unsigned int devfn, int where)
static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
unsigned int devfn, int where)
{
struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
int relbus;
if (!xilinx_pcie_valid_device(bus, devfn))
return NULL;
relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
(devfn << ECAM_DEV_NUM_SHIFT);
return port->reg_base + relbus + where;
}
/**
* xilinx_pcie_read_config - Read configuration space
* @bus: PCI Bus structure
* @devfn: Device/function
* @where: Offset from base
* @size: Byte/word/dword
* @val: Value to be read
*
* Return: PCIBIOS_SUCCESSFUL on success
* PCIBIOS_DEVICE_NOT_FOUND on failure
*/
static int xilinx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
void __iomem *addr;
if (!xilinx_pcie_valid_device(bus, devfn)) {
*val = 0xFFFFFFFF;
return PCIBIOS_DEVICE_NOT_FOUND;
}
addr = xilinx_pcie_config_base(bus, devfn, where);
switch (size) {
case 1:
*val = readb(addr);
break;
case 2:
*val = readw(addr);
break;
default:
*val = readl(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
/**
* xilinx_pcie_write_config - Write configuration space
* @bus: PCI Bus structure
* @devfn: Device/function
* @where: Offset from base
* @size: Byte/word/dword
* @val: Value to be written to device
*
* Return: PCIBIOS_SUCCESSFUL on success
* PCIBIOS_DEVICE_NOT_FOUND on failure
*/
static int xilinx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
void __iomem *addr;
if (!xilinx_pcie_valid_device(bus, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
addr = xilinx_pcie_config_base(bus, devfn, where);
switch (size) {
case 1:
writeb(val, addr);
break;
case 2:
writew(val, addr);
break;
default:
writel(val, addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
/* PCIe operations */
static struct pci_ops xilinx_pcie_ops = {
.read = xilinx_pcie_read_config,
.write = xilinx_pcie_write_config,
.map_bus = xilinx_pcie_map_bus,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
};
/* MSI functions */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment