PCI: xilinx: Convert to use generic config accessors

Convert the Xilinx host PCI driver to use the generic config access
functions.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: linux-arm-kernel@lists.infradead.org

drivers/pci/host/pcie-xilinx.c

@@ -189,7 +189,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 }
 
 /**
- * xilinx_pcie_config_base - Get configuration base
+ * xilinx_pcie_map_bus - Get configuration base
  * @bus: PCI Bus structure
  * @devfn: Device/function
  * @where: Offset from base
@@ -197,96 +197,26 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
  * Return: Base address of the configuration space needed to be
  *	   accessed.
  */
-static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus,
-					     unsigned int devfn, int where)
+static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
+					 unsigned int devfn, int where)
 {
 	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
 	int relbus;
 
+	if (!xilinx_pcie_valid_device(bus, devfn))
+		return NULL;
+
 	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
 		 (devfn << ECAM_DEV_NUM_SHIFT);
 
 	return port->reg_base + relbus + where;
 }
 
-/**
- * xilinx_pcie_read_config - Read configuration space
- * @bus: PCI Bus structure
- * @devfn: Device/function
- * @where: Offset from base
- * @size: Byte/word/dword
- * @val: Value to be read
- *
- * Return: PCIBIOS_SUCCESSFUL on success
- *	   PCIBIOS_DEVICE_NOT_FOUND on failure
- */
-static int xilinx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
-				   int where, int size, u32 *val)
-{
-	void __iomem *addr;
-
-	if (!xilinx_pcie_valid_device(bus, devfn)) {
-		*val = 0xFFFFFFFF;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	addr = xilinx_pcie_config_base(bus, devfn, where);
-
-	switch (size) {
-	case 1:
-		*val = readb(addr);
-		break;
-	case 2:
-		*val = readw(addr);
-		break;
-	default:
-		*val = readl(addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/**
- * xilinx_pcie_write_config - Write configuration space
- * @bus: PCI Bus structure
- * @devfn: Device/function
- * @where: Offset from base
- * @size: Byte/word/dword
- * @val: Value to be written to device
- *
- * Return: PCIBIOS_SUCCESSFUL on success
- *	   PCIBIOS_DEVICE_NOT_FOUND on failure
- */
-static int xilinx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
-				    int where, int size, u32 val)
-{
-	void __iomem *addr;
-
-	if (!xilinx_pcie_valid_device(bus, devfn))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	addr = xilinx_pcie_config_base(bus, devfn, where);
-
-	switch (size) {
-	case 1:
-		writeb(val, addr);
-		break;
-	case 2:
-		writew(val, addr);
-		break;
-	default:
-		writel(val, addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
 /* PCIe operations */
 static struct pci_ops xilinx_pcie_ops = {
-	.read  = xilinx_pcie_read_config,
-	.write = xilinx_pcie_write_config,
+	.map_bus = xilinx_pcie_map_bus,
+	.read	= pci_generic_config_read,
+	.write	= pci_generic_config_write,
 };
 
 /* MSI functions */