Commit 0443b3f4 authored by Quentin Deslandes's avatar Quentin Deslandes Committed by Greg Kroah-Hartman

staging: axis-fifo: replace spinlock with mutex

Following the device's documentation guidance, reading a packet from the
device or writing a packet to it must be atomic. Previously, only
reading device's vacancy (before writing on it) or occupancy (before
reading from it) was locked. Hence, effectively reading the packet or
writing the packet wasn't locked at all. However, reading a packet (and
writing one, to a lesser extent) requires to read 3 different registers
in a specific order, without missing one or else we should reset the
device.

This patch fixes the device's locking mechanism on the FIFO character
device. As the device was using copy_from_user() and copy_to_user(), we
need to replace spinlocks with mutexes.
Signed-off-by: default avatarQuentin Deslandes <quentin.deslandes@itdev.co.uk>
Link: https://lore.kernel.org/r/20200121103958.12941-1-quentin.deslandes@itdev.co.ukSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b17028d2
......@@ -16,7 +16,7 @@
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/spinlock_types.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/cdev.h>
#include <linux/init.h>
......@@ -133,9 +133,9 @@ struct axis_fifo {
int has_tx_fifo; /* whether the IP has the tx fifo enabled */
wait_queue_head_t read_queue; /* wait queue for asynchronos read */
spinlock_t read_queue_lock; /* lock for reading waitqueue */
struct mutex read_lock; /* lock for reading */
wait_queue_head_t write_queue; /* wait queue for asynchronos write */
spinlock_t write_queue_lock; /* lock for writing waitqueue */
struct mutex write_lock; /* lock for writing */
unsigned int write_flags; /* write file flags */
unsigned int read_flags; /* read file flags */
......@@ -336,7 +336,21 @@ static void reset_ip_core(struct axis_fifo *fifo)
iowrite32(XLLF_INT_ALL_MASK, fifo->base_addr + XLLF_ISR_OFFSET);
}
/* reads a single packet from the fifo as dictated by the tlast signal */
/**
* axis_fifo_write() - Read a packet from AXIS-FIFO character device.
* @f Open file.
* @buf User space buffer to read to.
* @len User space buffer length.
* @off Buffer offset.
*
* As defined by the device's documentation, we need to check the device's
* occupancy before reading the length register and then the data. All these
* operations must be executed atomically, in order and one after the other
* without missing any.
*
* Returns the number of bytes read from the device or negative error code
* on failure.
*/
static ssize_t axis_fifo_read(struct file *f, char __user *buf,
size_t len, loff_t *off)
{
......@@ -350,36 +364,37 @@ static ssize_t axis_fifo_read(struct file *f, char __user *buf,
u32 tmp_buf[READ_BUF_SIZE];
if (fifo->read_flags & O_NONBLOCK) {
/* opened in non-blocking mode
* return if there are no packets available
/*
* Device opened in non-blocking mode. Try to lock it and then
* check if any packet is available.
*/
if (!ioread32(fifo->base_addr + XLLF_RDFO_OFFSET))
if (!mutex_trylock(&fifo->read_lock))
return -EAGAIN;
if (!ioread32(fifo->base_addr + XLLF_RDFO_OFFSET)) {
ret = -EAGAIN;
goto end_unlock;
}
} else {
/* opened in blocking mode
* wait for a packet available interrupt (or timeout)
* if nothing is currently available
*/
spin_lock_irq(&fifo->read_queue_lock);
ret = wait_event_interruptible_lock_irq_timeout
(fifo->read_queue,
ioread32(fifo->base_addr + XLLF_RDFO_OFFSET),
fifo->read_queue_lock,
(read_timeout >= 0) ? msecs_to_jiffies(read_timeout) :
mutex_lock(&fifo->read_lock);
ret = wait_event_interruptible_timeout(fifo->read_queue,
ioread32(fifo->base_addr + XLLF_RDFO_OFFSET),
(read_timeout >= 0) ? msecs_to_jiffies(read_timeout) :
MAX_SCHEDULE_TIMEOUT);
spin_unlock_irq(&fifo->read_queue_lock);
if (ret == 0) {
/* timeout occurred */
dev_dbg(fifo->dt_device, "read timeout");
return -EAGAIN;
} else if (ret == -ERESTARTSYS) {
/* signal received */
return -ERESTARTSYS;
} else if (ret < 0) {
dev_err(fifo->dt_device, "wait_event_interruptible_timeout() error in read (ret=%i)\n",
ret);
return ret;
if (ret <= 0) {
if (ret == 0) {
ret = -EAGAIN;
} else if (ret != -ERESTARTSYS) {
dev_err(fifo->dt_device, "wait_event_interruptible_timeout() error in read (ret=%i)\n",
ret);
}
goto end_unlock;
}
}
......@@ -387,14 +402,16 @@ static ssize_t axis_fifo_read(struct file *f, char __user *buf,
if (!bytes_available) {
dev_err(fifo->dt_device, "received a packet of length 0 - fifo core will be reset\n");
reset_ip_core(fifo);
return -EIO;
ret = -EIO;
goto end_unlock;
}
if (bytes_available > len) {
dev_err(fifo->dt_device, "user read buffer too small (available bytes=%zu user buffer bytes=%zu) - fifo core will be reset\n",
bytes_available, len);
reset_ip_core(fifo);
return -EINVAL;
ret = -EINVAL;
goto end_unlock;
}
if (bytes_available % sizeof(u32)) {
......@@ -403,7 +420,8 @@ static ssize_t axis_fifo_read(struct file *f, char __user *buf,
*/
dev_err(fifo->dt_device, "received a packet that isn't word-aligned - fifo core will be reset\n");
reset_ip_core(fifo);
return -EIO;
ret = -EIO;
goto end_unlock;
}
words_available = bytes_available / sizeof(u32);
......@@ -423,16 +441,37 @@ static ssize_t axis_fifo_read(struct file *f, char __user *buf,
if (copy_to_user(buf + copied * sizeof(u32), tmp_buf,
copy * sizeof(u32))) {
reset_ip_core(fifo);
return -EFAULT;
ret = -EFAULT;
goto end_unlock;
}
copied += copy;
words_available -= copy;
}
return bytes_available;
ret = bytes_available;
end_unlock:
mutex_unlock(&fifo->read_lock);
return ret;
}
/**
* axis_fifo_write() - Write buffer to AXIS-FIFO character device.
* @f Open file.
* @buf User space buffer to write to the device.
* @len User space buffer length.
* @off Buffer offset.
*
* As defined by the device's documentation, we need to write to the device's
* data buffer then to the device's packet length register atomically. Also,
* we need to lock before checking if the device has available space to avoid
* any concurrency issue.
*
* Returns the number of bytes written to the device or negative error code
* on failure.
*/
static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
size_t len, loff_t *off)
{
......@@ -465,12 +504,17 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
}
if (fifo->write_flags & O_NONBLOCK) {
/* opened in non-blocking mode
* return if there is not enough room available in the fifo
/*
* Device opened in non-blocking mode. Try to lock it and then
* check if there is any room to write the given buffer.
*/
if (!mutex_trylock(&fifo->write_lock))
return -EAGAIN;
if (words_to_write > ioread32(fifo->base_addr +
XLLF_TDFV_OFFSET)) {
return -EAGAIN;
ret = -EAGAIN;
goto end_unlock;
}
} else {
/* opened in blocking mode */
......@@ -478,30 +522,22 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
/* wait for an interrupt (or timeout) if there isn't
* currently enough room in the fifo
*/
spin_lock_irq(&fifo->write_queue_lock);
ret = wait_event_interruptible_lock_irq_timeout
(fifo->write_queue,
ioread32(fifo->base_addr + XLLF_TDFV_OFFSET)
mutex_lock(&fifo->write_lock);
ret = wait_event_interruptible_timeout(fifo->write_queue,
ioread32(fifo->base_addr + XLLF_TDFV_OFFSET)
>= words_to_write,
fifo->write_queue_lock,
(write_timeout >= 0) ?
msecs_to_jiffies(write_timeout) :
(write_timeout >= 0) ? msecs_to_jiffies(write_timeout) :
MAX_SCHEDULE_TIMEOUT);
spin_unlock_irq(&fifo->write_queue_lock);
if (ret == 0) {
/* timeout occurred */
dev_dbg(fifo->dt_device, "write timeout\n");
return -EAGAIN;
} else if (ret == -ERESTARTSYS) {
/* signal received */
return -ERESTARTSYS;
} else if (ret < 0) {
/* unknown error */
dev_err(fifo->dt_device,
"wait_event_interruptible_timeout() error in write (ret=%i)\n",
ret);
return ret;
if (ret <= 0) {
if (ret == 0) {
ret = -EAGAIN;
} else if (ret != -ERESTARTSYS) {
dev_err(fifo->dt_device, "wait_event_interruptible_timeout() error in write (ret=%i)\n",
ret);
}
goto end_unlock;
}
}
......@@ -515,7 +551,8 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
if (copy_from_user(tmp_buf, buf + copied * sizeof(u32),
copy * sizeof(u32))) {
reset_ip_core(fifo);
return -EFAULT;
ret = -EFAULT;
goto end_unlock;
}
for (i = 0; i < copy; i++)
......@@ -526,10 +563,15 @@ static ssize_t axis_fifo_write(struct file *f, const char __user *buf,
words_to_write -= copy;
}
ret = copied * sizeof(u32);
/* write packet size to fifo */
iowrite32(copied * sizeof(u32), fifo->base_addr + XLLF_TLR_OFFSET);
iowrite32(ret, fifo->base_addr + XLLF_TLR_OFFSET);
end_unlock:
mutex_unlock(&fifo->write_lock);
return (ssize_t)copied * sizeof(u32);
return ret;
}
static irqreturn_t axis_fifo_irq(int irq, void *dw)
......@@ -789,8 +831,8 @@ static int axis_fifo_probe(struct platform_device *pdev)
init_waitqueue_head(&fifo->read_queue);
init_waitqueue_head(&fifo->write_queue);
spin_lock_init(&fifo->read_queue_lock);
spin_lock_init(&fifo->write_queue_lock);
mutex_init(&fifo->read_lock);
mutex_init(&fifo->write_lock);
/* ----------------------------
* init device memory space
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment