Commit 06f31cb0 authored by Olof Johansson's avatar Olof Johansson

Merge branch 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux into next/soc

From Pawel Moll:
* 'vexpress-clk-soc' of git://git.linaro.org/people/pawelmoll/linux:
  ARM: vexpress: Remove motherboard dependencies in the DTS files
  ARM: vexpress: Start using new Versatile Express infrastructure
  ARM: vexpress: Add config bus components and clocks to DTs
  mfd: Versatile Express system registers driver
  mfd: Versatile Express config infrastructure
parents 17bffc78 433683a6
ARM Versatile Express system registers
--------------------------------------
This is a system control registers block, providing multiple low level
platform functions like board detection and identification, software
interrupt generation, MMC and NOR Flash control etc.
Required node properties:
- compatible value : = "arm,vexpress,sysreg";
- reg : physical base address and the size of the registers window
- gpio-controller : specifies that the node is a GPIO controller
- #gpio-cells : size of the GPIO specifier, should be 2:
- first cell is the pseudo-GPIO line number:
0 - MMC CARDIN
1 - MMC WPROT
2 - NOR FLASH WPn
- second cell can take standard GPIO flags (currently ignored).
Example:
v2m_sysreg: sysreg@10000000 {
compatible = "arm,vexpress-sysreg";
reg = <0x10000000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
This block also can also act a bridge to the platform's configuration
bus via "system control" interface, addressing devices with site number,
position in the board stack, config controller, function and device
numbers - see motherboard's TRM for more details.
The node describing a config device must refer to the sysreg node via
"arm,vexpress,config-bridge" phandle (can be also defined in the node's
parent) and relies on the board topology properties - see main vexpress
node documentation for more details. It must must also define the
following property:
- arm,vexpress-sysreg,func : must contain two cells:
- first cell defines function number (eg. 1 for clock generator,
2 for voltage regulators etc.)
- device number (eg. osc 0, osc 1 etc.)
Example:
mcc {
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
};
};
......@@ -11,6 +11,10 @@ the motherboard file using a /include/ directive. As the motherboard
can be initialized in one of two different configurations ("memory
maps"), care must be taken to include the correct one.
Root node
---------
Required properties in the root node:
- compatible value:
compatible = "arm,vexpress,<model>", "arm,vexpress";
......@@ -45,6 +49,10 @@ Optional properties in the root node:
- Coretile Express A9x4 (V2P-CA9) HBI-0225:
arm,hbi = <0x225>;
CPU nodes
---------
Top-level standard "cpus" node is required. It must contain a node
with device_type = "cpu" property for every available core, eg.:
......@@ -59,6 +67,52 @@ with device_type = "cpu" property for every available core, eg.:
};
};
Configuration infrastructure
----------------------------
The platform has an elaborated configuration system, consisting of
microcontrollers residing on the mother- and daughterboards known
as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
The controllers are responsible for the platform initialization
(reset generation, flash programming, FPGA bitfiles loading etc.)
but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
Nodes describing devices controlled by this infrastructure should
point at the bridge device node:
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
This property can be also defined in a parent node (eg. for a DCC)
and is effective for all children.
Platform topology
-----------------
As Versatile Express can be configured in number of physically
different setups, the device tree should describe platform topology.
Root node and main motherboard node must define the following
property, describing physical location of the children nodes:
- site number:
arm,vexpress,site = <number>;
where 0 means motherboard, 1 or 2 are daugtherboard sites,
0xf means "master" site (site containing main CPU tile)
- when daughterboards are stacked on one site, their position
in the stack be be described with:
arm,vexpress,position = <number>;
- when describing tiles consisting more than one DCC, its number
can be described with:
arm,vexpress,dcc = <number>;
Any of the numbers above defaults to zero if not defined in
the node or any of its parent.
Motherboard
-----------
The motherboard description file provides a single "motherboard" node
using 2 address cells corresponding to the Static Memory Bus used
between the motherboard and the tile. The first cell defines the Chip
......@@ -87,22 +141,30 @@ can be used to obtain required phandle in the tile's "aliases" node:
- SP804 timers:
v2m_timer01 and v2m_timer23
Current Linux implementation requires a "arm,v2m_timer" alias
pointing at one of the motherboard's SP804 timers, if it is to be
used as the system timer. This alias should be defined in the
motherboard files.
The tile description should define a "smb" node, describing the
Static Memory Bus between the tile and motherboard. It must define
the following properties:
- "simple-bus" compatible value (to ensure creation of the children)
compatible = "simple-bus";
- mapping of the SMB CS/offset addresses into main address space:
#address-cells = <2>;
#size-cells = <1>;
ranges = <...>;
- interrupts mapping:
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <...>;
The tile description must define "ranges", "interrupt-map-mask" and
"interrupt-map" properties to translate the motherboard's address
and interrupt space into one used by the tile's processor.
Abbreviated example:
Example of a VE tile description (simplified)
---------------------------------------------
/dts-v1/;
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -134,13 +196,29 @@ Abbreviated example:
<0x2c000100 0x100>;
};
motherboard {
dcc {
compatible = "simple-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* CS0 is visible at 0x08000000 */
ranges = <0 0 0x08000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
/* Active high IRQ 0 is connected to GIC's SPI0 */
interrupt-map = <0 0 0 &gic 0 0 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -17,17 +17,16 @@
* CHANGES TO vexpress-v2m.dtsi!
*/
/ {
aliases {
arm,v2m_timer = &v2m_timer01;
};
motherboard {
compatible = "simple-bus";
model = "V2M-P1";
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
arm,v2m-memory-map = "rs1";
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
#interrupt-cells = <1>;
ranges;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
......@@ -72,14 +71,20 @@ iofpga@3,00000000 {
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
sysreg@010000 {
v2m_sysreg: sysreg@010000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
sysctl@020000 {
v2m_sysctl: sysctl@020000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
/* PCI-E I2C bus */
......@@ -100,66 +105,92 @@ aaci@040000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
cd-gpios = <&v2m_sysreg 0 0>;
wp-gpios = <&v2m_sysreg 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "mclk", "apb_pclk";
};
kmi@060000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@070000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
v2m_serial0: uart@090000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial1: uart@0a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial2: uart@0b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial3: uart@0c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
wdt@0f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
clock-names = "wdogclk", "apb_pclk";
};
v2m_timer01: timer@110000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x1000>;
interrupts = <2>;
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <3>;
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
/* DVI I2C bus */
......@@ -185,6 +216,8 @@ rtc@170000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x170000 0x1000>;
interrupts = <4>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
compact-flash@1a0000 {
......@@ -198,6 +231,8 @@ clcd@1f0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f0000 0x1000>;
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
};
};
......@@ -208,5 +243,98 @@ v2m_fixed_3v3: fixedregulator@0 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
v2m_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
v2m_refclk1mhz: refclk1mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
v2m_refclk32khz: refclk32khz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: osc@1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 63500000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: osc@2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt@0 {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp@0 {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset@0 {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga@0 {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown@0 {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot@0 {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode@0 {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
......@@ -17,16 +17,15 @@
* CHANGES TO vexpress-v2m-rs1.dtsi!
*/
/ {
aliases {
arm,v2m_timer = &v2m_timer01;
};
motherboard {
compatible = "simple-bus";
model = "V2M-P1";
arm,hbi = <0x190>;
arm,vexpress,site = <0>;
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
#interrupt-cells = <1>;
ranges;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
......@@ -71,14 +70,20 @@ iofpga@7,00000000 {
#size-cells = <1>;
ranges = <0 7 0 0x20000>;
sysreg@00000 {
v2m_sysreg: sysreg@00000 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
sysctl@01000 {
v2m_sysctl: sysctl@01000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x01000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
/* PCI-E I2C bus */
......@@ -99,66 +104,92 @@ aaci@04000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x04000 0x1000>;
interrupts = <11>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
mmci@05000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
cd-gpios = <&v2m_sysreg 0 0>;
wp-gpios = <&v2m_sysreg 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "mclk", "apb_pclk";
};
kmi@06000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x06000 0x1000>;
interrupts = <12>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@07000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x07000 0x1000>;
interrupts = <13>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
v2m_serial0: uart@09000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x09000 0x1000>;
interrupts = <5>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial1: uart@0a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a000 0x1000>;
interrupts = <6>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial2: uart@0b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b000 0x1000>;
interrupts = <7>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial3: uart@0c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c000 0x1000>;
interrupts = <8>;
clocks = <&v2m_oscclk2>, <&smbclk>;
clock-names = "uartclk", "apb_pclk";
};
wdt@0f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f000 0x1000>;
interrupts = <0>;
clocks = <&v2m_refclk32khz>, <&smbclk>;
clock-names = "wdogclk", "apb_pclk";
};
v2m_timer01: timer@11000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x11000 0x1000>;
interrupts = <2>;
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@12000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x12000 0x1000>;
interrupts = <3>;
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
/* DVI I2C bus */
......@@ -184,6 +215,8 @@ rtc@17000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x17000 0x1000>;
interrupts = <4>;
clocks = <&smbclk>;
clock-names = "apb_pclk";
};
compact-flash@1a000 {
......@@ -197,6 +230,8 @@ clcd@1f000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f000 0x1000>;
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
};
};
......@@ -207,5 +242,98 @@ v2m_fixed_3v3: fixedregulator@0 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
v2m_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
v2m_refclk1mhz: refclk1mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
v2m_refclk32khz: refclk32khz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* MCC static memory clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk0";
};
v2m_oscclk1: osc@1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 63500000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
v2m_oscclk2: osc@2 {
/* IO FPGA peripheral clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <24000000 24000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk2";
};
volt@0 {
/* Logic level voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VIO";
regulator-always-on;
label = "VIO";
};
temp@0 {
/* MCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "MCC";
};
reset@0 {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga@0 {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown@0 {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot@0 {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode@0 {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};
};
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA15";
arm,hbi = <0x237>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
......@@ -54,17 +55,24 @@ hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk5>;
clock-names = "pxlclk";
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0 0x2b0a0000 0 0x1000>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
wdt@2b060000 {
compatible = "arm,sp805", "arm,primecell";
status = "disabled";
reg = <0 0x2b060000 0 0x1000>;
interrupts = <98>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c001000 {
......@@ -84,6 +92,8 @@ memory-controller@7ffd0000 {
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
dma@7ffb0000 {
......@@ -94,6 +104,8 @@ dma@7ffb0000 {
<0 89 4>,
<0 90 4>,
<0 91 4>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
timer {
......@@ -110,7 +122,109 @@ pmu {
<0 69 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* CPU PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <50000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
osc@4 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
oscclk5: osc@5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
smbclk: osc@6 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
freq-range = <20000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk6";
};
oscclk7: osc@7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
freq-range = <20000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk7";
};
osc@8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
freq-range = <40000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk8";
};
volt@0 {
/* CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "Cores";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "Cores";
};
amp@0 {
/* Total current for the two cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "Cores";
};
temp@0 {
/* DCC internal temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
power@0 {
/* Total power */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "Cores";
};
energy@0 {
/* Total energy */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 0>;
label = "Cores";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
......@@ -118,6 +232,7 @@ motherboard {
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -162,7 +277,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA15_CA7";
arm,hbi = <0x249>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <2>;
......@@ -74,17 +75,23 @@ wdt@2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
interrupts = <98>;
clocks = <&oscclk6a>, <&oscclk6a>;
clock-names = "wdogclk", "apb_pclk";
};
hdlcd@2b000000 {
compatible = "arm,hdlcd";
reg = <0 0x2b000000 0 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk5>;
clock-names = "pxlclk";
};
memory-controller@2b0a0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0 0x2b0a0000 0 0x1000>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c001000 {
......@@ -104,6 +111,8 @@ memory-controller@7ffd0000 {
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
dma@7ff00000 {
......@@ -114,6 +123,8 @@ dma@7ff00000 {
<0 89 4>,
<0 90 4>,
<0 91 4>;
clocks = <&oscclk6a>;
clock-names = "apb_pclk";
};
timer {
......@@ -130,7 +141,175 @@ pmu {
<0 69 4>;
};
motherboard {
oscclk6a: oscclk6a {
/* Reference 24MHz clock */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "oscclk6a";
};
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* A15 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
osc@1 {
/* A15 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk1";
};
osc@2 {
/* A7 PLL 0 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk2";
};
osc@3 {
/* A7 PLL 1 reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk3";
};
osc@4 {
/* External AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
oscclk5: osc@5 {
/* HDLCD PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
smbclk: osc@6 {
/* Static memory controller clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 6>;
freq-range = <20000000 40000000>;
#clock-cells = <0>;
clock-output-names = "oscclk6";
};
osc@7 {
/* SYS PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 7>;
freq-range = <17000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk7";
};
osc@8 {
/* DDR2 PLL reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 8>;
freq-range = <20000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk8";
};
volt@0 {
/* A15 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "A15 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A15 Vcore";
};
volt@1 {
/* A7 CPU core voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "A7 Vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
label = "A7 Vcore";
};
amp@0 {
/* Total current for the two A15 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "A15 Icore";
};
amp@1 {
/* Total current for the three A7 cores */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "A7 Icore";
};
temp@0 {
/* DCC internal temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
power@0 {
/* Total power for the two A15 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "A15 Pcore";
};
power@1 {
/* Total power for the three A7 cores */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
label = "A7 Pcore";
};
energy@0 {
/* Total energy for the two A15 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 0>;
label = "A15 Jcore";
};
energy@2 {
/* Total energy for the three A7 cores */
compatible = "arm,vexpress-energy";
arm,vexpress-sysreg,func = <13 2>;
label = "A7 Jcore";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
......@@ -138,6 +317,7 @@ motherboard {
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -182,7 +362,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA5s";
arm,hbi = <0x225>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -56,11 +57,15 @@ hdlcd@2a110000 {
compatible = "arm,hdlcd";
reg = <0x2a110000 0x1000>;
interrupts = <0 85 4>;
clocks = <&oscclk3>;
clock-names = "pxlclk";
};
memory-controller@2a150000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0x2a150000 0x1000>;
clocks = <&oscclk1>;
clock-names = "apb_pclk";
};
memory-controller@2a190000 {
......@@ -68,6 +73,8 @@ memory-controller@2a190000 {
reg = <0x2a190000 0x1000>;
interrupts = <0 86 4>,
<0 87 4>;
clocks = <&oscclk1>;
clock-names = "apb_pclk";
};
scu@2c000000 {
......@@ -109,7 +116,77 @@ pmu {
<0 69 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* CPU and internal AXI reference clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <50000000 100000000>;
#clock-cells = <0>;
clock-output-names = "oscclk0";
};
oscclk1: osc@1 {
/* Multiplexed AXI master clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <5000000 50000000>;
#clock-cells = <0>;
clock-output-names = "oscclk1";
};
osc@2 {
/* DDR2 */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <80000000 120000000>;
#clock-cells = <0>;
clock-output-names = "oscclk2";
};
oscclk3: osc@3 {
/* HDLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 3>;
freq-range = <23750000 165000000>;
#clock-cells = <0>;
clock-output-names = "oscclk3";
};
osc@4 {
/* Test chip gate configuration */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
freq-range = <80000000 80000000>;
#clock-cells = <0>;
clock-output-names = "oscclk4";
};
smbclk: osc@5 {
/* SMB clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 5>;
freq-range = <25000000 60000000>;
#clock-cells = <0>;
clock-output-names = "oscclk5";
};
temp@0 {
/* DCC internal operating temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
label = "DCC";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x04000000>,
<1 0 0x14000000 0x04000000>,
<2 0 0x18000000 0x04000000>,
......@@ -117,6 +194,7 @@ motherboard {
<4 0 0x0c000000 0x04000000>,
<5 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -161,7 +239,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m-rs1.dtsi"
};
};
/include/ "vexpress-v2m-rs1.dtsi"
......@@ -12,6 +12,7 @@
/ {
model = "V2P-CA9";
arm,hbi = <0x191>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
interrupt-parent = <&gic>;
#address-cells = <1>;
......@@ -70,11 +71,15 @@ clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
interrupts = <0 44 4>;
clocks = <&oscclk1>, <&oscclk2>;
clock-names = "clcdclk", "apb_pclk";
};
memory-controller@100e0000 {
compatible = "arm,pl341", "arm,primecell";
reg = <0x100e0000 0x1000>;
clocks = <&oscclk2>;
clock-names = "apb_pclk";
};
memory-controller@100e1000 {
......@@ -82,6 +87,8 @@ memory-controller@100e1000 {
reg = <0x100e1000 0x1000>;
interrupts = <0 45 4>,
<0 46 4>;
clocks = <&oscclk2>;
clock-names = "apb_pclk";
};
timer@100e4000 {
......@@ -89,12 +96,16 @@ timer@100e4000 {
reg = <0x100e4000 0x1000>;
interrupts = <0 48 4>,
<0 49 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "timclk", "apb_pclk";
};
watchdog@100e5000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x100e5000 0x1000>;
interrupts = <0 51 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "wdogclk", "apb_pclk";
};
scu@1e000000 {
......@@ -140,13 +151,132 @@ pmu {
<0 63 4>;
};
motherboard {
dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
/* ACLK clock to the AXI master port on the test chip */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
freq-range = <30000000 50000000>;
#clock-cells = <0>;
clock-output-names = "extsaxiclk";
};
oscclk1: osc@1 {
/* Reference clock for the CLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <10000000 80000000>;
#clock-cells = <0>;
clock-output-names = "clcdclk";
};
smbclk: oscclk2: osc@2 {
/* Reference clock for the test chip internal PLLs */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
freq-range = <33000000 100000000>;
#clock-cells = <0>;
clock-output-names = "tcrefclk";
};
volt@0 {
/* Test Chip internal logic voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
regulator-name = "VD10";
regulator-always-on;
label = "VD10";
};
volt@1 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
regulator-name = "VD10_S2";
regulator-always-on;
label = "VD10_S2";
};
volt@2 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 2>;
regulator-name = "VD10_S3";
regulator-always-on;
label = "VD10_S3";
};
volt@3 {
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 3>;
regulator-name = "VCC1V8";
regulator-always-on;
label = "VCC1V8";
};
volt@4 {
/* DDR2 SDRAM VTT termination voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 4>;
regulator-name = "DDR2VTT";
regulator-always-on;
label = "DDR2VTT";
};
volt@5 {
/* Local board supply for miscellaneous logic external to the Test Chip */
arm,vexpress-sysreg,func = <2 5>;
compatible = "arm,vexpress-volt";
regulator-name = "VCC3V3";
regulator-always-on;
label = "VCC3V3";
};
amp@0 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "VD10_S2";
};
amp@1 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "VD10_S3";
};
power@0 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "PVD10_S2";
};
power@1 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
label = "PVD10_S3";
};
};
smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x40000000 0x04000000>,
<1 0 0x44000000 0x04000000>,
<2 0 0x48000000 0x04000000>,
<3 0 0x4c000000 0x04000000>,
<7 0 0x10000000 0x00020000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 63>;
interrupt-map = <0 0 0 &gic 0 0 4>,
<0 0 1 &gic 0 1 4>,
......@@ -191,7 +321,7 @@ motherboard {
<0 0 40 &gic 0 40 4>,
<0 0 41 &gic 0 41 4>,
<0 0 42 &gic 0 42 4>;
/include/ "vexpress-v2m.dtsi"
};
};
/include/ "vexpress-v2m.dtsi"
......@@ -50,12 +50,6 @@
#define SCPCELLID2 0xFF8
#define SCPCELLID3 0xFFC
#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15)
#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15)
#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17)
#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17)
#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2))
static inline void sysctl_soft_reset(void __iomem *base)
......
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select COMMON_CLK
select COMMON_CLK_VERSATILE
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
......@@ -17,6 +18,7 @@ config ARCH_VEXPRESS
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select VEXPRESS_CONFIG
help
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
......
......@@ -4,7 +4,7 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-y := v2m.o reset.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......@@ -9,6 +9,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clkdev.h>
#include <linux/vexpress.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
......@@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void)
ca9x4_twd_init();
}
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
u32 site = v2m_get_master_site();
/*
* Old firmware was using the "site" component of the command
* to control the DVI muxer (while it should be always 0 ie. MB).
* Newer firmware uses the data register. Keep both for compatibility.
*/
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
}
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
......@@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = {
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = ct_ca9x4_clcd_enable,
.setup = ct_ca9x4_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
......@@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&gpio_device,
};
static struct v2m_osc ct_osc1 = {
.osc = 1,
.rate_min = 10000000,
.rate_max = 80000000,
.rate_default = 23750000,
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_CT_CA9X4_PMU_CPU0,
......@@ -149,10 +128,18 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
static struct platform_device osc1_device = {
.name = "vexpress-osc",
.id = 1,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0xf, 1),
},
};
static void __init ct_ca9x4_init(void)
{
int i;
struct clk *clk;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
......@@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void)
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
ct_osc1.site = v2m_get_master_site();
clk = v2m_osc_register("ct:osc1", &ct_osc1);
clk_register_clkdev(clk, NULL, "ct:clcd");
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
platform_device_register(&osc1_device);
WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
NULL, "ct:clcd"));
}
#ifdef CONFIG_SMP
......
#ifndef __MACH_MOTHERBOARD_H
#define __MACH_MOTHERBOARD_H
#include <linux/clk-provider.h>
/*
* Physical addresses, offset from V2M_PA_CS0-3
*/
......@@ -41,31 +39,6 @@
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
/*
* Offsets from SYSREGS base
*/
#define V2M_SYS_ID 0x000
#define V2M_SYS_SW 0x004
#define V2M_SYS_LED 0x008
#define V2M_SYS_100HZ 0x024
#define V2M_SYS_FLAGS 0x030
#define V2M_SYS_FLAGSSET 0x030
#define V2M_SYS_FLAGSCLR 0x034
#define V2M_SYS_NVFLAGS 0x038
#define V2M_SYS_NVFLAGSSET 0x038
#define V2M_SYS_NVFLAGSCLR 0x03c
#define V2M_SYS_MCI 0x048
#define V2M_SYS_FLASH 0x03c
#define V2M_SYS_CFGSW 0x058
#define V2M_SYS_24MHZ 0x05c
#define V2M_SYS_MISC 0x060
#define V2M_SYS_DMA 0x064
#define V2M_SYS_PROCID0 0x084
#define V2M_SYS_PROCID1 0x088
#define V2M_SYS_CFGDATA 0x0a0
#define V2M_SYS_CFGCTRL 0x0a4
#define V2M_SYS_CFGSTAT 0x0a8
/*
* Interrupts. Those in {} are for AMBA devices
......@@ -90,43 +63,6 @@
#define IRQ_V2M_PCIE (32 + 17)
/*
* Configuration
*/
#define SYS_CFG_START (1 << 31)
#define SYS_CFG_WRITE (1 << 30)
#define SYS_CFG_OSC (1 << 20)
#define SYS_CFG_VOLT (2 << 20)
#define SYS_CFG_AMP (3 << 20)
#define SYS_CFG_TEMP (4 << 20)
#define SYS_CFG_RESET (5 << 20)
#define SYS_CFG_SCC (6 << 20)
#define SYS_CFG_MUXFPGA (7 << 20)
#define SYS_CFG_SHUTDOWN (8 << 20)
#define SYS_CFG_REBOOT (9 << 20)
#define SYS_CFG_DVIMODE (11 << 20)
#define SYS_CFG_POWER (12 << 20)
#define SYS_CFG_SITE(n) ((n) << 16)
#define SYS_CFG_SITE_MB 0
#define SYS_CFG_SITE_DB1 1
#define SYS_CFG_SITE_DB2 2
#define SYS_CFG_STACK(n) ((n) << 12)
#define SYS_CFG_ERR (1 << 1)
#define SYS_CFG_COMPLETE (1 << 0)
int v2m_cfg_write(u32 devfn, u32 data);
int v2m_cfg_read(u32 devfn, u32 *data);
void v2m_flags_set(u32 data);
/*
* Miscellaneous
*/
#define SYS_MISC_MASTERSITE (1 << 14)
#define SYS_PROCIDx_HBI_MASK 0xfff
int v2m_get_master_site(void);
/*
* Core tile IDs
*/
......@@ -149,21 +85,4 @@ struct ct_desc {
extern struct ct_desc *ct_desc;
/*
* OSC clock provider
*/
struct v2m_osc {
struct clk_hw hw;
u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */
u8 stack; /* board stack position */
u16 osc;
unsigned long rate_min;
unsigned long rate_max;
unsigned long rate_default;
};
#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw)
struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc);
#endif
......@@ -13,6 +13,7 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of_fdt.h>
#include <linux/vexpress.h>
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
......@@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
}
struct smp_operations __initdata vexpress_smp_ops = {
......
This diff is collapsed.
......@@ -1070,3 +1070,9 @@ config MCP_UCB1200_TS
depends on MCP_UCB1200 && INPUT
endmenu
config VEXPRESS_CONFIG
bool
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
......@@ -138,3 +138,4 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2012 ARM Limited
*/
#define pr_fmt(fmt) "vexpress-config: " fmt
#include <linux/bitops.h>
#include <linux/completion.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/vexpress.h>
#define VEXPRESS_CONFIG_MAX_BRIDGES 2
struct vexpress_config_bridge {
struct device_node *node;
struct vexpress_config_bridge_info *info;
struct list_head transactions;
spinlock_t transactions_lock;
} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES];
static DECLARE_BITMAP(vexpress_config_bridges_map,
ARRAY_SIZE(vexpress_config_bridges));
static DEFINE_MUTEX(vexpress_config_bridges_mutex);
struct vexpress_config_bridge *vexpress_config_bridge_register(
struct device_node *node,
struct vexpress_config_bridge_info *info)
{
struct vexpress_config_bridge *bridge;
int i;
pr_debug("Registering bridge '%s'\n", info->name);
mutex_lock(&vexpress_config_bridges_mutex);
i = find_first_zero_bit(vexpress_config_bridges_map,
ARRAY_SIZE(vexpress_config_bridges));
if (i >= ARRAY_SIZE(vexpress_config_bridges)) {
pr_err("Can't register more bridges!\n");
mutex_unlock(&vexpress_config_bridges_mutex);
return NULL;
}
__set_bit(i, vexpress_config_bridges_map);
bridge = &vexpress_config_bridges[i];
bridge->node = node;
bridge->info = info;
INIT_LIST_HEAD(&bridge->transactions);
spin_lock_init(&bridge->transactions_lock);
mutex_unlock(&vexpress_config_bridges_mutex);
return bridge;
}
void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge)
{
struct vexpress_config_bridge __bridge = *bridge;
int i;
mutex_lock(&vexpress_config_bridges_mutex);
for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++)
if (&vexpress_config_bridges[i] == bridge)
__clear_bit(i, vexpress_config_bridges_map);
mutex_unlock(&vexpress_config_bridges_mutex);
WARN_ON(!list_empty(&__bridge.transactions));
while (!list_empty(&__bridge.transactions))
cpu_relax();
}
struct vexpress_config_func {
struct vexpress_config_bridge *bridge;
void *func;
};
struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
struct device_node *node)
{
struct device_node *bridge_node;
struct vexpress_config_func *func;
int i;
if (WARN_ON(dev && node && dev->of_node != node))
return NULL;
if (dev && !node)
node = dev->of_node;
func = kzalloc(sizeof(*func), GFP_KERNEL);
if (!func)
return NULL;
bridge_node = of_node_get(node);
while (bridge_node) {
const __be32 *prop = of_get_property(bridge_node,
"arm,vexpress,config-bridge", NULL);
if (prop) {
bridge_node = of_find_node_by_phandle(
be32_to_cpup(prop));
break;
}
bridge_node = of_get_next_parent(bridge_node);
}
mutex_lock(&vexpress_config_bridges_mutex);
for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) {
struct vexpress_config_bridge *bridge =
&vexpress_config_bridges[i];
if (test_bit(i, vexpress_config_bridges_map) &&
bridge->node == bridge_node) {
func->bridge = bridge;
func->func = bridge->info->func_get(dev, node);
break;
}
}
mutex_unlock(&vexpress_config_bridges_mutex);
if (!func->func) {
of_node_put(node);
kfree(func);
return NULL;
}
return func;
}
void vexpress_config_func_put(struct vexpress_config_func *func)
{
func->bridge->info->func_put(func->func);
of_node_put(func->bridge->node);
kfree(func);
}
struct vexpress_config_trans {
struct vexpress_config_func *func;
int offset;
bool write;
u32 *data;
int status;
struct completion completion;
struct list_head list;
};
static void vexpress_config_dump_trans(const char *what,
struct vexpress_config_trans *trans)
{
pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n",
what, trans->write ? "write" : "read", trans,
trans->func->func, trans->offset,
trans->data ? *trans->data : 0, trans->status);
}
static int vexpress_config_schedule(struct vexpress_config_trans *trans)
{
int status;
struct vexpress_config_bridge *bridge = trans->func->bridge;
unsigned long flags;
init_completion(&trans->completion);
trans->status = -EFAULT;
spin_lock_irqsave(&bridge->transactions_lock, flags);
vexpress_config_dump_trans("Executing", trans);
if (list_empty(&bridge->transactions))
status = bridge->info->func_exec(trans->func->func,
trans->offset, trans->write, trans->data);
else
status = VEXPRESS_CONFIG_STATUS_WAIT;
switch (status) {
case VEXPRESS_CONFIG_STATUS_DONE:
vexpress_config_dump_trans("Finished", trans);
trans->status = status;
break;
case VEXPRESS_CONFIG_STATUS_WAIT:
list_add_tail(&trans->list, &bridge->transactions);
break;
}
spin_unlock_irqrestore(&bridge->transactions_lock, flags);
return status;
}
void vexpress_config_complete(struct vexpress_config_bridge *bridge,
int status)
{
struct vexpress_config_trans *trans;
unsigned long flags;
spin_lock_irqsave(&bridge->transactions_lock, flags);
trans = list_first_entry(&bridge->transactions,
struct vexpress_config_trans, list);
vexpress_config_dump_trans("Completed", trans);
trans->status = status;
list_del(&trans->list);
if (!list_empty(&bridge->transactions)) {
vexpress_config_dump_trans("Pending", trans);
bridge->info->func_exec(trans->func->func, trans->offset,
trans->write, trans->data);
}
spin_unlock_irqrestore(&bridge->transactions_lock, flags);
complete(&trans->completion);
}
int vexpress_config_wait(struct vexpress_config_trans *trans)
{
wait_for_completion(&trans->completion);
return trans->status;
}
int vexpress_config_read(struct vexpress_config_func *func, int offset,
u32 *data)
{
struct vexpress_config_trans trans = {
.func = func,
.offset = offset,
.write = false,
.data = data,
.status = 0,
};
int status = vexpress_config_schedule(&trans);
if (status == VEXPRESS_CONFIG_STATUS_WAIT)
status = vexpress_config_wait(&trans);
return status;
}
EXPORT_SYMBOL(vexpress_config_read);
int vexpress_config_write(struct vexpress_config_func *func, int offset,
u32 data)
{
struct vexpress_config_trans trans = {
.func = func,
.offset = offset,
.write = true,
.data = &data,
.status = 0,
};
int status = vexpress_config_schedule(&trans);
if (status == VEXPRESS_CONFIG_STATUS_WAIT)
status = vexpress_config_wait(&trans);
return status;
}
EXPORT_SYMBOL(vexpress_config_write);
This diff is collapsed.
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2012 ARM Limited
*/
#ifndef _LINUX_VEXPRESS_H
#define _LINUX_VEXPRESS_H
#include <linux/device.h>
#define VEXPRESS_SITE_MB 0
#define VEXPRESS_SITE_DB1 1
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
#define VEXPRESS_CONFIG_STATUS_DONE 0
#define VEXPRESS_CONFIG_STATUS_WAIT 1
#define VEXPRESS_GPIO_MMC_CARDIN 0
#define VEXPRESS_GPIO_MMC_WPROT 1
#define VEXPRESS_GPIO_FLASH_WPn 2
#define VEXPRESS_RES_FUNC(_site, _func) \
{ \
.start = (_site), \
.end = (_func), \
.flags = IORESOURCE_BUS, \
}
/* Config bridge API */
/**
* struct vexpress_config_bridge_info - description of the platform
* configuration infrastructure bridge.
*
* @name: Bridge name
*
* @func_get: Obtains pointer to a configuration function for a given
* device or a Device Tree node, to be used with @func_put
* and @func_exec. The node pointer should take precedence
* over device pointer when both are passed.
*
* @func_put: Tells the bridge that the function will not be used any
* more, so all allocated resources can be released.
*
* @func_exec: Executes a configuration function read or write operation.
* The offset selects a 32 bit word of the value accessed.
* Must return VEXPRESS_CONFIG_STATUS_DONE when operation
* is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when
* will be completed in some time or negative value in case
* of error.
*/
struct vexpress_config_bridge_info {
const char *name;
void *(*func_get)(struct device *dev, struct device_node *node);
void (*func_put)(void *func);
int (*func_exec)(void *func, int offset, bool write, u32 *data);
};
struct vexpress_config_bridge;
struct vexpress_config_bridge *vexpress_config_bridge_register(
struct device_node *node,
struct vexpress_config_bridge_info *info);
void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge);
void vexpress_config_complete(struct vexpress_config_bridge *bridge,
int status);
/* Config function API */
struct vexpress_config_func;
struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
struct device_node *node);
#define vexpress_config_func_get_by_dev(dev) \
__vexpress_config_func_get(dev, NULL)
#define vexpress_config_func_get_by_node(node) \
__vexpress_config_func_get(NULL, node)
void vexpress_config_func_put(struct vexpress_config_func *func);
/* Both may sleep! */
int vexpress_config_read(struct vexpress_config_func *func, int offset,
u32 *data);
int vexpress_config_write(struct vexpress_config_func *func, int offset,
u32 data);
/* Platform control */
u32 vexpress_get_procid(int site);
u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node)
#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL)
unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
void vexpress_sysreg_early_init(void __iomem *base);
void vexpress_sysreg_of_early_init(void);
void vexpress_power_off(void);
void vexpress_restart(char str, const char *cmd);
/* Clocks */
struct clk *vexpress_osc_setup(struct device *dev);
void vexpress_osc_of_setup(struct device_node *node);
void vexpress_clk_init(void __iomem *sp810_base);
void vexpress_clk_of_init(void);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment