Merge tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc and other driver subsystem fixes for
  reported issues that have been in my tree.

  Included in here are fixes for:

   - iio driver fixes for reported problems

   - much reported bugfix for a lis3lv02d_i2c regression

   - comedi driver bugfix

   - mei new device ids

   - mei driver fixes

   - counter core fix

  All of these have been in linux-next with no reported issues, some for
  many weeks"

* tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: gsc_proxy: match component when GSC is on different bus
  misc: fastrpc: Pass proper arguments to scm call
  comedi: comedi_test: Prevent timers rescheduling during deletion
  comedi: comedi_8255: Correct error in subdevice initialization
  misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
  iio: accel: adxl367: fix I2C FIFO data register
  iio: accel: adxl367: fix DEVID read after reset
  iio: pressure: dlhl60d: Initialize empty DLH bytes
  iio: imu: inv_mpu6050: fix frequency setting when chip is off
  iio: pressure: Fixes BMP38x and BMP390 SPI support
  iio: imu: inv_mpu6050: fix FIFO parsing when empty
  mei: Add Meteor Lake support for IVSC device
  mei: me: add arrow lake point H DID
  mei: me: add arrow lake point S DID
  counter: fix privdata alignment

drivers/comedi/drivers/comedi_8255.c

@@ -159,6 +159,7 @@ static int __subdev_8255_init(struct comedi_device *dev,
 		return -ENOMEM;
 
 	spriv->context = context;
+	spriv->io      = io;
 
 	s->type		= COMEDI_SUBD_DIO;
 	s->subdev_flags	= SDF_READABLE | SDF_WRITABLE;

drivers/comedi/drivers/comedi_test.c

@@ -87,6 +87,8 @@ struct waveform_private {
 	struct comedi_device *dev;	/* parent comedi device */
 	u64 ao_last_scan_time;		/* time of previous AO scan in usec */
 	unsigned int ao_scan_period;	/* AO scan period in usec */
+	bool ai_timer_enable:1;		/* should AI timer be running? */
+	bool ao_timer_enable:1;		/* should AO timer be running? */
 	unsigned short ao_loopbacks[N_CHANS];
 };
 
@@ -236,8 +238,12 @@ static void waveform_ai_timer(struct timer_list *t)
 			time_increment = devpriv->ai_convert_time - now;
 		else
 			time_increment = 1;
-		mod_timer(&devpriv->ai_timer,
-			  jiffies + usecs_to_jiffies(time_increment));
+		spin_lock(&dev->spinlock);
+		if (devpriv->ai_timer_enable) {
+			mod_timer(&devpriv->ai_timer,
+				  jiffies + usecs_to_jiffies(time_increment));
+		}
+		spin_unlock(&dev->spinlock);
 	}
 
 overrun:
@@ -393,9 +399,12 @@ static int waveform_ai_cmd(struct comedi_device *dev,
 	 * Seem to need an extra jiffy here, otherwise timer expires slightly
 	 * early!
 	 */
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ai_timer_enable = true;
 	devpriv->ai_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ai_convert_period) + 1;
 	add_timer(&devpriv->ai_timer);
+	spin_unlock_bh(&dev->spinlock);
 	return 0;
 }
 
@@ -404,6 +413,9 @@ static int waveform_ai_cancel(struct comedi_device *dev,
 {
 	struct waveform_private *devpriv = dev->private;
 
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ai_timer_enable = false;
+	spin_unlock_bh(&dev->spinlock);
 	if (in_softirq()) {
 		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ai_timer);
@@ -495,8 +507,12 @@ static void waveform_ao_timer(struct timer_list *t)
 		unsigned int time_inc = devpriv->ao_last_scan_time +
 					devpriv->ao_scan_period - now;
 
-		mod_timer(&devpriv->ao_timer,
-			  jiffies + usecs_to_jiffies(time_inc));
+		spin_lock(&dev->spinlock);
+		if (devpriv->ao_timer_enable) {
+			mod_timer(&devpriv->ao_timer,
+				  jiffies + usecs_to_jiffies(time_inc));
+		}
+		spin_unlock(&dev->spinlock);
 	}
 
 underrun:
@@ -517,9 +533,12 @@ static int waveform_ao_inttrig_start(struct comedi_device *dev,
 	async->inttrig = NULL;
 
 	devpriv->ao_last_scan_time = ktime_to_us(ktime_get());
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ao_timer_enable = true;
 	devpriv->ao_timer.expires =
 		jiffies + usecs_to_jiffies(devpriv->ao_scan_period);
 	add_timer(&devpriv->ao_timer);
+	spin_unlock_bh(&dev->spinlock);
 
 	return 1;
 }
@@ -604,6 +623,9 @@ static int waveform_ao_cancel(struct comedi_device *dev,
 	struct waveform_private *devpriv = dev->private;
 
 	s->async->inttrig = NULL;
+	spin_lock_bh(&dev->spinlock);
+	devpriv->ao_timer_enable = false;
+	spin_unlock_bh(&dev->spinlock);
 	if (in_softirq()) {
 		/* Assume we were called from the timer routine itself. */
 		del_timer(&devpriv->ao_timer);

drivers/counter/counter-core.c

@@ -31,10 +31,11 @@ struct counter_device_allochelper {
 	struct counter_device counter;
 
 	/*
-	 * This is cache line aligned to ensure private data behaves like if it
-	 * were kmalloced separately.
+	 * This ensures private data behaves like if it were kmalloced
+	 * separately. Also ensures the minimum alignment for safe DMA
+	 * operations (which may or may not mean cache alignment).
 	 */
-	unsigned long privdata[] ____cacheline_aligned;
+	unsigned long privdata[] __aligned(ARCH_DMA_MINALIGN);
 };
 
 static void counter_device_release(struct device *dev)

drivers/iio/accel/adxl367.c

@@ -1429,9 +1429,11 @@ static int adxl367_verify_devid(struct adxl367_state *st)
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read_poll_timeout(st->regmap, ADXL367_REG_DEVID, val,
-				       val == ADXL367_DEVID_AD, 1000, 10000);
+	ret = regmap_read(st->regmap, ADXL367_REG_DEVID, &val);
 	if (ret)
+		return dev_err_probe(st->dev, ret, "Failed to read dev id\n");
+
+	if (val != ADXL367_DEVID_AD)
 		return dev_err_probe(st->dev, -ENODEV,
 				     "Invalid dev id 0x%02X, expected 0x%02X\n",
 				     val, ADXL367_DEVID_AD);
@@ -1510,6 +1512,8 @@ int adxl367_probe(struct device *dev, const struct adxl367_ops *ops,
 	if (ret)
 		return ret;
 
+	fsleep(15000);
+
 	ret = adxl367_verify_devid(st);
 	if (ret)
 		return ret;

drivers/iio/accel/adxl367_i2c.c

@@ -11,7 +11,7 @@
 
 #include "adxl367.h"
 
-#define ADXL367_I2C_FIFO_DATA	0x42
+#define ADXL367_I2C_FIFO_DATA	0x18
 
 struct adxl367_i2c_state {
 	struct regmap *regmap;

drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c

@@ -109,6 +109,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 	/* compute and process only all complete datum */
 	nb = fifo_count / bytes_per_datum;
 	fifo_count = nb * bytes_per_datum;
+	if (nb == 0)
+		goto end_session;
 	/* Each FIFO data contains all sensors, so same number for FIFO and sensor data */
 	fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
 	inv_sensors_timestamp_interrupt(&st->timestamp, fifo_period, nb, nb, pf->timestamp);

drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c

@@ -111,6 +111,7 @@ int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
 	if (enable) {
 		/* reset timestamping */
 		inv_sensors_timestamp_reset(&st->timestamp);
+		inv_sensors_timestamp_apply_odr(&st->timestamp, 0, 0, 0);
 		/* reset FIFO */
 		d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
 		ret = regmap_write(st->map, st->reg->user_ctrl, d);
@@ -184,6 +185,10 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
 		if (result)
 			goto error_power_off;
 	} else {
+		st->chip_config.gyro_fifo_enable = 0;
+		st->chip_config.accl_fifo_enable = 0;
+		st->chip_config.temp_fifo_enable = 0;
+		st->chip_config.magn_fifo_enable = 0;
 		result = inv_mpu6050_prepare_fifo(st, false);
 		if (result)
 			goto error_power_off;

drivers/iio/pressure/bmp280-spi.c

@@ -4,6 +4,7 @@
  *
  * Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
  */
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/err.h>
@@ -35,6 +36,34 @@ static int bmp280_regmap_spi_read(void *context, const void *reg,
 	return spi_write_then_read(spi, reg, reg_size, val, val_size);
 }
 
+static int bmp380_regmap_spi_read(void *context, const void *reg,
+				  size_t reg_size, void *val, size_t val_size)
+{
+	struct spi_device *spi = to_spi_device(context);
+	u8 rx_buf[4];
+	ssize_t status;
+
+	/*
+	 * Maximum number of consecutive bytes read for a temperature or
+	 * pressure measurement is 3.
+	 */
+	if (val_size > 3)
+		return -EINVAL;
+
+	/*
+	 * According to the BMP3xx datasheets, for a basic SPI read opertion,
+	 * the first byte needs to be dropped and the rest are the requested
+	 * data.
+	 */
+	status = spi_write_then_read(spi, reg, 1, rx_buf, val_size + 1);
+	if (status)
+		return status;
+
+	memcpy(val, rx_buf + 1, val_size);
+
+	return 0;
+}
+
 static struct regmap_bus bmp280_regmap_bus = {
 	.write = bmp280_regmap_spi_write,
 	.read = bmp280_regmap_spi_read,
@@ -42,10 +71,19 @@ static struct regmap_bus bmp280_regmap_bus = {
 	.val_format_endian_default = REGMAP_ENDIAN_BIG,
 };
 
+static struct regmap_bus bmp380_regmap_bus = {
+	.write = bmp280_regmap_spi_write,
+	.read = bmp380_regmap_spi_read,
+	.read_flag_mask = BIT(7),
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
 static int bmp280_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
 	const struct bmp280_chip_info *chip_info;
+	struct regmap_bus *bmp_regmap_bus;
 	struct regmap *regmap;
 	int ret;
 
@@ -58,8 +96,18 @@ static int bmp280_spi_probe(struct spi_device *spi)
 
 	chip_info = spi_get_device_match_data(spi);
 
+	switch (chip_info->chip_id[0]) {
+	case BMP380_CHIP_ID:
+	case BMP390_CHIP_ID:
+		bmp_regmap_bus = &bmp380_regmap_bus;
+		break;
+	default:
+		bmp_regmap_bus = &bmp280_regmap_bus;
+		break;
+	}
+
 	regmap = devm_regmap_init(&spi->dev,
-				  &bmp280_regmap_bus,
+				  bmp_regmap_bus,
 				  &spi->dev,
 				  chip_info->regmap_config);
 	if (IS_ERR(regmap)) {

drivers/iio/pressure/dlhl60d.c

@@ -250,18 +250,17 @@ static irqreturn_t dlh_trigger_handler(int irq, void *private)
 	struct dlh_state *st = iio_priv(indio_dev);
 	int ret;
 	unsigned int chn, i = 0;
-	__be32 tmp_buf[2];
+	__be32 tmp_buf[2] = { };
 
 	ret = dlh_start_capture_and_read(st);
 	if (ret)
 		goto out;
 
 	for_each_set_bit(chn, indio_dev->active_scan_mask,
-		indio_dev->masklength) {
-		memcpy(tmp_buf + i,
+			 indio_dev->masklength) {
+		memcpy(&tmp_buf[i++],
 			&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
 			DLH_NUM_DATA_BYTES);
-		i++;
 	}
 
 	iio_push_to_buffers(indio_dev, tmp_buf);

drivers/misc/fastrpc.c

@@ -263,7 +263,6 @@ struct fastrpc_channel_ctx {
 	int domain_id;
 	int sesscount;
 	int vmcount;
-	u64 perms;
 	struct qcom_scm_vmperm vmperms[FASTRPC_MAX_VMIDS];
 	struct rpmsg_device *rpdev;
 	struct fastrpc_session_ctx session[FASTRPC_MAX_SESSIONS];
@@ -1279,9 +1278,11 @@ static int fastrpc_init_create_static_process(struct fastrpc_user *fl,
 
 		/* Map if we have any heap VMIDs associated with this ADSP Static Process. */
 		if (fl->cctx->vmcount) {
+			u64 src_perms = BIT(QCOM_SCM_VMID_HLOS);
+
 			err = qcom_scm_assign_mem(fl->cctx->remote_heap->phys,
 							(u64)fl->cctx->remote_heap->size,
-							&fl->cctx->perms,
+							&src_perms,
 							fl->cctx->vmperms, fl->cctx->vmcount);
 			if (err) {
 				dev_err(fl->sctx->dev, "Failed to assign memory with phys 0x%llx size 0x%llx err %d",
@@ -1915,8 +1916,10 @@ static int fastrpc_req_mmap(struct fastrpc_user *fl, char __user *argp)
 
 	/* Add memory to static PD pool, protection thru hypervisor */
 	if (req.flags == ADSP_MMAP_REMOTE_HEAP_ADDR && fl->cctx->vmcount) {
+		u64 src_perms = BIT(QCOM_SCM_VMID_HLOS);
+
 		err = qcom_scm_assign_mem(buf->phys, (u64)buf->size,
-			&fl->cctx->perms, fl->cctx->vmperms, fl->cctx->vmcount);
+			&src_perms, fl->cctx->vmperms, fl->cctx->vmcount);
 		if (err) {
 			dev_err(fl->sctx->dev, "Failed to assign memory phys 0x%llx size 0x%llx err %d",
 					buf->phys, buf->size, err);
@@ -2290,7 +2293,6 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
 
 	if (vmcount) {
 		data->vmcount = vmcount;
-		data->perms = BIT(QCOM_SCM_VMID_HLOS);
 		for (i = 0; i < data->vmcount; i++) {
 			data->vmperms[i].vmid = vmids[i];
 			data->vmperms[i].perm = QCOM_SCM_PERM_RWX;

drivers/misc/lis3lv02d/lis3lv02d_i2c.c

@@ -198,8 +198,14 @@ static int lis3lv02d_i2c_suspend(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
-	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+	/* Turn on for wakeup if turned off by runtime suspend */
+	if (lis3->pdata && lis3->pdata->wakeup_flags) {
+		if (pm_runtime_suspended(dev))
+			lis3lv02d_poweron(lis3);
+	/* For non wakeup turn off if not already turned off by runtime suspend */
+	} else if (!pm_runtime_suspended(dev))
 		lis3lv02d_poweroff(lis3);
+
 	return 0;
 }
 
@@ -208,13 +214,12 @@ static int lis3lv02d_i2c_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
-	/*
-	 * pm_runtime documentation says that devices should always
-	 * be powered on at resume. Pm_runtime turns them off after system
-	 * wide resume is complete.
-	 */
-	if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
-		pm_runtime_suspended(dev))
+	/* Turn back off if turned on for wakeup and runtime suspended*/
+	if (lis3->pdata && lis3->pdata->wakeup_flags) {
+		if (pm_runtime_suspended(dev))
+			lis3lv02d_poweroff(lis3);
+	/* For non wakeup turn back on if not runtime suspended */
+	} else if (!pm_runtime_suspended(dev))
 		lis3lv02d_poweron(lis3);
 
 	return 0;

drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c

@@ -96,7 +96,8 @@ static const struct component_master_ops mei_component_master_ops = {
  *
  *    The function checks if the device is pci device and
  *    Intel VGA adapter, the subcomponent is SW Proxy
- *    and the parent of MEI PCI and the parent of VGA are the same PCH device.
+ *    and the VGA is on the bus 0 reserved for built-in devices
+ *    to reject discrete GFX.
  *
  * @dev: master device
  * @subcomponent: subcomponent to match (I915_COMPONENT_SWPROXY)
@@ -123,7 +124,8 @@ static int mei_gsc_proxy_component_match(struct device *dev, int subcomponent,
 	if (subcomponent != I915_COMPONENT_GSC_PROXY)
 		return 0;
 
-	return component_compare_dev(dev->parent, ((struct device *)data)->parent);
+	/* Only built-in GFX */
+	return (pdev->bus->number == 0);
 }
 
 static int mei_gsc_proxy_probe(struct mei_cl_device *cldev,
@@ -146,7 +148,7 @@ static int mei_gsc_proxy_probe(struct mei_cl_device *cldev,
 	}
 
 	component_match_add_typed(&cldev->dev, &master_match,
-				  mei_gsc_proxy_component_match, cldev->dev.parent);
+				  mei_gsc_proxy_component_match, NULL);
 	if (IS_ERR_OR_NULL(master_match)) {
 		ret = -ENOMEM;
 		goto err_exit;

drivers/misc/mei/hw-me-regs.h

@@ -112,6 +112,8 @@
 #define MEI_DEV_ID_RPL_S      0x7A68  /* Raptor Lake Point S */
 
 #define MEI_DEV_ID_MTL_M      0x7E70  /* Meteor Lake Point M */
+#define MEI_DEV_ID_ARL_S      0x7F68  /* Arrow Lake Point S */
+#define MEI_DEV_ID_ARL_H      0x7770  /* Arrow Lake Point H */
 
 /*
  * MEI HW Section

drivers/misc/mei/pci-me.c

@@ -119,6 +119,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_H, MEI_ME_PCH15_CFG)},
 
 	/* required last entry */
 	{0, }

drivers/misc/mei/vsc-tp.c

@@ -535,6 +535,7 @@ static const struct acpi_device_id vsc_tp_acpi_ids[] = {
 	{ "INTC1009" }, /* Raptor Lake */
 	{ "INTC1058" }, /* Tiger Lake */
 	{ "INTC1094" }, /* Alder Lake */
+	{ "INTC10D0" }, /* Meteor Lake */
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, vsc_tp_acpi_ids);