Commit 1c3d038b authored by Russell King's avatar Russell King

PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers

soc_common already initializes state.wrprot to zero, so explicitly
setting wrprot to zero in the socket drivers has no additional effect.
Acked-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent a7670151
......@@ -81,7 +81,6 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd2 = 0; /* not available */
state->vs_3v = 1; /* Always true its a CF card */
state->vs_Xv = 0; /* not available */
state->wrprot = 0; /* not available */
}
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
......
......@@ -58,7 +58,6 @@ static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0; /* not available */
}
......
......@@ -48,7 +48,6 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0; /* not available */
}
......
......@@ -84,7 +84,6 @@ static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -44,7 +44,6 @@ static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->vs_3v = 1;
state->wrprot = 0;
state->vs_Xv = 0;
}
......
......@@ -83,7 +83,6 @@ static void mst_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd2 = (status & MST_PCMCIA_nSPKR_BVD2) ? 1 : 0;
state->vs_3v = (status & MST_PCMCIA_nVS1) ? 0 : 1;
state->vs_Xv = (status & MST_PCMCIA_nVS2) ? 0 : 1;
state->wrprot = 0; /* not available */
}
static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
......
......@@ -47,7 +47,6 @@ static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -51,7 +51,6 @@ static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -47,7 +47,6 @@ static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -54,7 +54,6 @@ static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd2 = 0; /* not available */
state->vs_3v = 1; /* not available - voltage detect for card */
state->vs_Xv = 0; /* not available */
state->wrprot = 0; /* not available - write protect */
}
static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
......
......@@ -75,7 +75,6 @@ static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0;
state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1;
state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1;
state->wrprot = 0; /* not available */
break;
#ifndef CONFIG_MACH_TRIZEPS_CONXS
......@@ -87,7 +86,6 @@ static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd2 = 0;
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0;
break;
#endif
......
......@@ -81,7 +81,6 @@ static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->wrprot = 0;
state->vs_3v = 1; /* Can only apply 3.3V */
state->vs_Xv = 0;
}
......
......@@ -69,7 +69,6 @@ static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -34,7 +34,6 @@ static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
static void
assabet_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
state->wrprot = 0; /* Not available on Assabet. */
state->vs_3v = 1; /* Can only apply 3.3V on Assabet. */
state->vs_Xv = 0;
}
......
......@@ -48,7 +48,6 @@ static void cerf_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
static void
cerf_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
}
......
......@@ -96,7 +96,6 @@ h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *st
{
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
state->vs_3v = 0;
state->vs_Xv = 0;
}
......
......@@ -106,7 +106,6 @@ static void nanoengine_pcmcia_socket_state(
state->bvd1 = 1;
state->bvd2 = 1;
state->wrprot = 0; /* Not available */
state->vs_3v = 1; /* Can only apply 3.3V */
state->vs_Xv = 0;
}
......
......@@ -44,7 +44,6 @@ shannon_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
switch (skt->nr) {
case 0:
state->wrprot = 0; /* Not available on Shannon. */
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 1; /* FIXME Can only apply 3.3V on Shannon. */
......@@ -52,7 +51,6 @@ shannon_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
break;
case 1:
state->wrprot = 0; /* Not available on Shannon. */
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 1; /* FIXME Can only apply 3.3V on Shannon. */
......
......@@ -46,7 +46,6 @@ simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
state->wrprot=0; /* Not available on Simpad. */
if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
(PCMCIA_VS1|PCMCIA_VS2)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment