PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers

soc_common already initializes state.wrprot to zero, so explicitly
setting wrprot to zero in the socket drivers has no additional effect.
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drivers/pcmcia/pxa2xx_balloon3.c

@@ -81,7 +81,6 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	state->bvd2	= 0;	/* not available */
 	state->vs_3v	= 1;	/* Always true its a CF card */
 	state->vs_Xv	= 0;	/* not available */
-	state->wrprot	= 0;	/* not available */
 }
 
 static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,

drivers/pcmcia/pxa2xx_cm_x255.c

@@ -58,7 +58,6 @@ static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 {
 	state->vs_3v  = 0;
 	state->vs_Xv  = 0;
-	state->wrprot = 0;  /* not available */
 }
 
 

drivers/pcmcia/pxa2xx_cm_x270.c

@@ -48,7 +48,6 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 {
 	state->vs_3v  = 0;
 	state->vs_Xv  = 0;
-	state->wrprot = 0;  /* not available */
 }
 
 

drivers/pcmcia/pxa2xx_colibri.c

@@ -84,7 +84,6 @@ static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
 	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
 	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
-	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/pxa2xx_e740.c

@@ -44,7 +44,6 @@ static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 	state->vs_3v  = 1;
-	state->wrprot = 0;
 	state->vs_Xv  = 0;
 }
 

drivers/pcmcia/pxa2xx_mainstone.c

@@ -83,7 +83,6 @@ static void mst_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	state->bvd2   = (status & MST_PCMCIA_nSPKR_BVD2) ? 1 : 0;
 	state->vs_3v  = (status & MST_PCMCIA_nVS1) ? 0 : 1;
 	state->vs_Xv  = (status & MST_PCMCIA_nVS2) ? 0 : 1;
-	state->wrprot = 0;  /* not available */
 }
 
 static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,

drivers/pcmcia/pxa2xx_palmld.c

@@ -47,7 +47,6 @@ static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 	state->detect = 1; /* always inserted */
-	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/pxa2xx_palmtc.c

@@ -51,7 +51,6 @@ static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 	state->detect = 1; /* always inserted */
-	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/pxa2xx_palmtx.c

@@ -47,7 +47,6 @@ static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
 	state->detect = 1; /* always inserted */
-	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/pxa2xx_stargate2.c

@@ -54,7 +54,6 @@ static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	state->bvd2   = 0; /* not available */
 	state->vs_3v  = 1; /* not available - voltage detect for card */
 	state->vs_Xv  = 0; /* not available */
-	state->wrprot = 0; /* not available - write protect */
 }
 
 static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,

drivers/pcmcia/pxa2xx_trizeps4.c

@@ -75,7 +75,6 @@ static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
 		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
 		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
-		state->wrprot = 0;	/* not available */
 		break;
 
 #ifndef CONFIG_MACH_TRIZEPS_CONXS
@@ -87,7 +86,6 @@ static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 		state->bvd2   = 0;
 		state->vs_3v  = 0;
 		state->vs_Xv  = 0;
-		state->wrprot = 0;
 		break;
 
 #endif

drivers/pcmcia/pxa2xx_viper.c

@@ -81,7 +81,6 @@ static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 				      struct pcmcia_state *state)
 {
-	state->wrprot = 0;
 	state->vs_3v  = 1; /* Can only apply 3.3V */
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/pxa2xx_vpac270.c

@@ -69,7 +69,6 @@ static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 					struct pcmcia_state *state)
 {
-	state->wrprot = 0;
 	state->vs_3v  = 1;
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/sa1100_assabet.c

@@ -34,7 +34,6 @@ static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 static void
 assabet_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
-	state->wrprot = 0; /* Not available on Assabet. */
 	state->vs_3v  = 1; /* Can only apply 3.3V on Assabet. */
 	state->vs_Xv  = 0;
 }

drivers/pcmcia/sa1100_cerf.c

@@ -48,7 +48,6 @@ static void cerf_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 static void
 cerf_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
-	state->wrprot	= 0;
 	state->vs_3v	= 1;
 	state->vs_Xv	= 0;
 }

drivers/pcmcia/sa1100_h3600.c

@@ -96,7 +96,6 @@ h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *st
 {
 	state->bvd1 = 0;
 	state->bvd2 = 0;
-	state->wrprot = 0; /* Not available on H3600. */
 	state->vs_3v = 0;
 	state->vs_Xv = 0;
 }

drivers/pcmcia/sa1100_nanoengine.c

@@ -106,7 +106,6 @@ static void nanoengine_pcmcia_socket_state(
 
 	state->bvd1 = 1;
 	state->bvd2 = 1;
-	state->wrprot = 0; /* Not available */
 	state->vs_3v = 1; /* Can only apply 3.3V */
 	state->vs_Xv = 0;
 }

drivers/pcmcia/sa1100_shannon.c

@@ -44,7 +44,6 @@ shannon_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 {
 	switch (skt->nr) {
 	case 0:
-		state->wrprot = 0; /* Not available on Shannon. */
 		state->bvd1   = 1; 
 		state->bvd2   = 1; 
 		state->vs_3v  = 1; /* FIXME Can only apply 3.3V on Shannon. */
@@ -52,7 +51,6 @@ shannon_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 		break;
 
 	case 1:
-		state->wrprot = 0; /* Not available on Shannon. */
 		state->bvd1   = 1; 
 		state->bvd2   = 1; 
 		state->vs_3v  = 1; /* FIXME Can only apply 3.3V on Shannon. */

drivers/pcmcia/sa1100_simpad.c

@@ -46,7 +46,6 @@ simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 
 	state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
 	state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
-	state->wrprot=0; /* Not available on Simpad. */
 
 	if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
 			(PCMCIA_VS1|PCMCIA_VS2)) {