Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.11-rc3.

  Include in here are:

   - USB gadget driver fixes for reported issues

   - new usb-serial driver ids

   - dma from stack bugfixes

   - typec bugfixes

   - dwc3 bugfixes

   - xhci driver bugfixes

   - other small misc usb driver bugfixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: dwc3: gadget: Clear wait flag on dequeue
  usb: typec: Send uevent for num_altmodes update
  usb: typec: Fix copy paste error for NVIDIA alt-mode description
  usb: gadget: enable super speed plus
  kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
  usb: uas: Add PNY USB Portable SSD to unusual_uas
  usb: gadget: configfs: Preserve function ordering after bind failure
  usb: gadget: select CONFIG_CRC32
  usb: gadget: core: change the comment for usb_gadget_connect
  usb: gadget: configfs: Fix use-after-free issue with udc_name
  usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
  usb: usbip: vhci_hcd: protect shift size
  USB: usblp: fix DMA to stack
  USB: serial: iuu_phoenix: fix DMA from stack
  USB: serial: option: add LongSung M5710 module support
  USB: serial: option: add Quectel EM160R-GL
  USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
  usb: gadget: f_uac2: reset wMaxPacketSize
  usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
  usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
  ...

Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml

@@ -11,8 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: ti,j721e-usb
+      - const: ti,am64-usb
+      - items:
+          - const: ti,j721e-usb
+          - const: ti,am64-usb
 
   reg:
     description: module registers

MAINTAINERS

@@ -3883,7 +3883,7 @@ F:	drivers/mtd/nand/raw/cadence-nand-controller.c
 CADENCE USB3 DRD IP DRIVER
 M:	Peter Chen <peter.chen@nxp.com>
 M:	Pawel Laszczak <pawell@cadence.com>
-M:	Roger Quadros <rogerq@ti.com>
+R:	Roger Quadros <rogerq@kernel.org>
 R:	Aswath Govindraju <a-govindraju@ti.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -139,9 +139,13 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	misc_pdev = of_find_device_by_node(args.np);
 	of_node_put(args.np);
 
-	if (!misc_pdev || !platform_get_drvdata(misc_pdev))
+	if (!misc_pdev)
 		return ERR_PTR(-EPROBE_DEFER);
 
+	if (!platform_get_drvdata(misc_pdev)) {
+		put_device(&misc_pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
 	data->dev = &misc_pdev->dev;
 
 	/*

drivers/usb/class/cdc-acm.c

@@ -1895,6 +1895,10 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x04d8, 0xfd08),
 	.driver_info = IGNORE_DEVICE,
 	},
+
+	{ USB_DEVICE(0x04d8, 0xf58b),
+	.driver_info = IGNORE_DEVICE,
+	},
 #endif
 
 	/*Samsung phone in firmware update mode */

drivers/usb/class/cdc-wdm.c

@@ -465,13 +465,23 @@ static int service_outstanding_interrupt(struct wdm_device *desc)
 	if (!desc->resp_count || !--desc->resp_count)
 		goto out;
 
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		rv = -ENODEV;
+		goto out;
+	}
+	if (test_bit(WDM_RESETTING, &desc->flags)) {
+		rv = -EIO;
+		goto out;
+	}
+
 	set_bit(WDM_RESPONDING, &desc->flags);
 	spin_unlock_irq(&desc->iuspin);
 	rv = usb_submit_urb(desc->response, GFP_KERNEL);
 	spin_lock_irq(&desc->iuspin);
 	if (rv) {
-		dev_err(&desc->intf->dev,
-			"usb_submit_urb failed with result %d\n", rv);
+		if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+			dev_err(&desc->intf->dev,
+				"usb_submit_urb failed with result %d\n", rv);
 
 		/* make sure the next notification trigger a submit */
 		clear_bit(WDM_RESPONDING, &desc->flags);
@@ -1027,9 +1037,9 @@ static void wdm_disconnect(struct usb_interface *intf)
 	wake_up_all(&desc->wait);
 	mutex_lock(&desc->rlock);
 	mutex_lock(&desc->wlock);
-	kill_urbs(desc);
 	cancel_work_sync(&desc->rxwork);
 	cancel_work_sync(&desc->service_outs_intr);
+	kill_urbs(desc);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
 

drivers/usb/class/usblp.c

@@ -274,8 +274,25 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
 #define usblp_reset(usblp)\
 	usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
 
-#define usblp_hp_channel_change_request(usblp, channel, buffer) \
-	usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+			USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+			channel, buf, 1);
+	if (ret == 0)
+		*new_channel = buf[0];
+
+	kfree(buf);
+
+	return ret;
+}
 
 /*
  * See the description for usblp_select_alts() below for the usage

drivers/usb/core/hcd.c

@@ -1649,14 +1649,12 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	urb->status = status;
 	/*
 	 * This function can be called in task context inside another remote
-	 * coverage collection section, but KCOV doesn't support that kind of
+	 * coverage collection section, but kcov doesn't support that kind of
 	 * recursion yet. Only collect coverage in softirq context for now.
 	 */
-	if (in_serving_softirq())
-		kcov_remote_start_usb((u64)urb->dev->bus->busnum);
+	kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
 	urb->complete(urb);
-	if (in_serving_softirq())
-		kcov_remote_stop();
+	kcov_remote_stop_softirq();
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);

drivers/usb/dwc3/core.h

@@ -285,6 +285,7 @@
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
 #define DWC3_GUSB2PHYACC_BUSY		BIT(23)
 #define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -754,7 +754,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = priv->drvdata->setup_regmaps(priv, base);
 	if (ret)
-		return ret;
+		goto err_disable_clks;
 
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);

drivers/usb/dwc3/gadget.c

@@ -1763,6 +1763,8 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 			list_for_each_entry_safe(r, t, &dep->started_list, list)
 				dwc3_gadget_move_cancelled_request(r);
 
+			dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
+
 			goto out;
 		}
 	}
@@ -2083,6 +2085,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 
 static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
 static void __dwc3_gadget_stop(struct dwc3 *dwc);
+static int __dwc3_gadget_start(struct dwc3 *dwc);
 
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 {
@@ -2145,6 +2148,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 			dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
 						dwc->ev_buf->length;
 		}
+	} else {
+		__dwc3_gadget_start(dwc);
 	}
 
 	ret = dwc3_gadget_run_stop(dwc, is_on, false);
@@ -2319,10 +2324,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	}
 
 	dwc->gadget_driver	= driver;
-
-	if (pm_runtime_active(dwc->dev))
-		__dwc3_gadget_start(dwc);
-
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
@@ -2348,13 +2349,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-
-	if (pm_runtime_suspended(dwc->dev))
-		goto out;
-
-	__dwc3_gadget_stop(dwc);
-
-out:
 	dwc->gadget_driver	= NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
 

drivers/usb/dwc3/ulpi.c

@@ -7,6 +7,8 @@
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
  */
 
+#include <linux/delay.h>
+#include <linux/time64.h>
 #include <linux/ulpi/regs.h>
 
 #include "core.h"
@@ -17,14 +19,28 @@
 		DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
 		DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
 
-static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+#define DWC3_ULPI_BASE_DELAY	DIV_ROUND_UP(NSEC_PER_SEC, 60000000L)
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)
 {
-	unsigned int count = 1000;
+	unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY;
+	unsigned int count = 10000;
 	u32 reg;
 
+	if (addr >= ULPI_EXT_VENDOR_SPECIFIC)
+		ns += DWC3_ULPI_BASE_DELAY;
+
+	if (read)
+		ns += DWC3_ULPI_BASE_DELAY;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	if (reg & DWC3_GUSB2PHYCFG_SUSPHY)
+		usleep_range(1000, 1200);
+
 	while (count--) {
+		ndelay(ns);
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
-		if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+		if (reg & DWC3_GUSB2PHYACC_DONE)
 			return 0;
 		cpu_relax();
 	}
@@ -38,16 +54,10 @@ static int dwc3_ulpi_read(struct device *dev, u8 addr)
 	u32 reg;
 	int ret;
 
-	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-	if (reg & DWC3_GUSB2PHYCFG_SUSPHY) {
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-	}
-
 	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
 
-	ret = dwc3_ulpi_busyloop(dwc);
+	ret = dwc3_ulpi_busyloop(dwc, addr, true);
 	if (ret)
 		return ret;
 
@@ -61,17 +71,11 @@ static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val)
 	struct dwc3 *dwc = dev_get_drvdata(dev);
 	u32 reg;
 
-	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-	if (reg & DWC3_GUSB2PHYCFG_SUSPHY) {
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-	}
-
 	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
 	reg |= DWC3_GUSB2PHYACC_WRITE | val;
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
 
-	return dwc3_ulpi_busyloop(dwc);
+	return dwc3_ulpi_busyloop(dwc, addr, false);
 }
 
 static const struct ulpi_ops dwc3_ulpi_ops = {

drivers/usb/gadget/Kconfig

@@ -265,6 +265,7 @@ config USB_CONFIGFS_NCM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_NCM
+	select CRC32
 	help
 	  NCM is an advanced protocol for Ethernet encapsulation, allows
 	  grouping of several ethernet frames into one USB transfer and
@@ -314,6 +315,7 @@ config USB_CONFIGFS_EEM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_EEM
+	select CRC32
 	help
 	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
 	  and therefore can be supported by more hardware.  Technically ECM and

drivers/usb/gadget/composite.c

@@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_function *function)
 
 	spin_lock_irqsave(&cdev->lock, flags);
 
-	if (cdev->deactivations == 0)
+	if (cdev->deactivations == 0) {
+		spin_unlock_irqrestore(&cdev->lock, flags);
 		status = usb_gadget_deactivate(cdev->gadget);
+		spin_lock_irqsave(&cdev->lock, flags);
+	}
 	if (status == 0)
 		cdev->deactivations++;
 
@@ -424,8 +427,11 @@ int usb_function_activate(struct usb_function *function)
 		status = -EINVAL;
 	else {
 		cdev->deactivations--;
-		if (cdev->deactivations == 0)
+		if (cdev->deactivations == 0) {
+			spin_unlock_irqrestore(&cdev->lock, flags);
 			status = usb_gadget_activate(cdev->gadget);
+			spin_lock_irqsave(&cdev->lock, flags);
+		}
 	}
 
 	spin_unlock_irqrestore(&cdev->lock, flags);

drivers/usb/gadget/configfs.c

@@ -221,9 +221,16 @@ static ssize_t gadget_dev_desc_bcdUSB_store(struct config_item *item,
 
 static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
 {
-	char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+	struct gadget_info *gi = to_gadget_info(item);
+	char *udc_name;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	udc_name = gi->composite.gadget_driver.udc_name;
+	ret = sprintf(page, "%s\n", udc_name ?: "");
+	mutex_unlock(&gi->lock);
 
-	return sprintf(page, "%s\n", udc_name ?: "");
+	return ret;
 }
 
 static int unregister_gadget(struct gadget_info *gi)
@@ -1248,9 +1255,9 @@ static void purge_configs_funcs(struct gadget_info *gi)
 
 		cfg = container_of(c, struct config_usb_cfg, c);
 
-		list_for_each_entry_safe(f, tmp, &c->functions, list) {
+		list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
 
-			list_move_tail(&f->list, &cfg->func_list);
+			list_move(&f->list, &cfg->func_list);
 			if (f->unbind) {
 				dev_dbg(&gi->cdev.gadget->dev,
 					"unbind function '%s'/%p\n",
@@ -1536,7 +1543,7 @@ static const struct usb_gadget_driver configfs_driver_template = {
 	.suspend	= configfs_composite_suspend,
 	.resume		= configfs_composite_resume,
 
-	.max_speed	= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER_PLUS,
 	.driver = {
 		.owner          = THIS_MODULE,
 		.name		= "configfs-gadget",
@@ -1576,7 +1583,7 @@ static struct config_group *gadgets_make(
 	gi->composite.unbind = configfs_do_nothing;
 	gi->composite.suspend = NULL;
 	gi->composite.resume = NULL;
-	gi->composite.max_speed = USB_SPEED_SUPER;
+	gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
 
 	spin_lock_init(&gi->spinlock);
 	mutex_init(&gi->lock);

drivers/usb/gadget/function/f_printer.c

@@ -1162,6 +1162,7 @@ static int printer_func_bind(struct usb_configuration *c,
 		printer_req_free(dev->in_ep, req);
 	}
 
+	usb_free_all_descriptors(f);
 	return ret;
 
 }

drivers/usb/gadget/function/f_uac2.c

@@ -271,7 +271,7 @@ static struct usb_endpoint_descriptor fs_epout_desc = {
 
 	.bEndpointAddress = USB_DIR_OUT,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -280,7 +280,7 @@ static struct usb_endpoint_descriptor hs_epout_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -348,7 +348,7 @@ static struct usb_endpoint_descriptor fs_epin_desc = {
 
 	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -357,7 +357,7 @@ static struct usb_endpoint_descriptor hs_epin_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -444,12 +444,28 @@ struct cntrl_range_lay3 {
 	__le32	dRES;
 } __packed;
 
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 	struct usb_endpoint_descriptor *ep_desc,
-	unsigned int factor, bool is_playback)
+	enum usb_device_speed speed, bool is_playback)
 {
 	int chmask, srate, ssize;
-	u16 max_packet_size;
+	u16 max_size_bw, max_size_ep;
+	unsigned int factor;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		max_size_ep = 1023;
+		factor = 1000;
+		break;
+
+	case USB_SPEED_HIGH:
+		max_size_ep = 1024;
+		factor = 8000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
 	if (is_playback) {
 		chmask = uac2_opts->p_chmask;
@@ -461,10 +477,12 @@ static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 		ssize = uac2_opts->c_ssize;
 	}
 
-	max_packet_size = num_channels(chmask) * ssize *
+	max_size_bw = num_channels(chmask) * ssize *
 		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
-	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
-				le16_to_cpu(ep_desc->wMaxPacketSize)));
+	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+						    max_size_ep));
+
+	return 0;
 }
 
 /* Use macro to overcome line length limitation */
@@ -670,10 +688,33 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	}
 
 	/* Calculate wMaxPacketSize according to audio bandwidth */
-	set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
-	set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
-	set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
-	set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
 
 	if (EPOUT_EN(uac2_opts)) {
 		agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);

drivers/usb/gadget/function/u_ether.c

@@ -45,9 +45,10 @@
 #define UETH__VERSION	"29-May-2008"
 
 /* Experiments show that both Linux and Windows hosts allow up to 16k
- * frame sizes. Set the max size to 15k+52 to prevent allocating 32k
+ * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k
  * blocks and still have efficient handling. */
-#define GETHER_MAX_ETH_FRAME_LEN 15412
+#define GETHER_MAX_MTU_SIZE 15412
+#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
 
 struct eth_dev {
 	/* lock is held while accessing port_usb
@@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
@@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname)
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	return net;
 }

drivers/usb/gadget/legacy/acm_ms.c

@@ -200,8 +200,10 @@ static int acm_ms_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail_string_ids;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

drivers/usb/gadget/udc/Kconfig

@@ -90,7 +90,7 @@ config USB_BCM63XX_UDC
 
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
-	depends on FSL_SOC || ARCH_MXC
+	depends on FSL_SOC
 	help
 	   Some of Freescale PowerPC and i.MX processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.

drivers/usb/gadget/udc/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-y			:= fsl_udc_core.o
-fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_TEGRA_XUDC)	+= tegra-xudc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o

drivers/usb/gadget/udc/core.c

@@ -659,8 +659,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
  *
  * Enables the D+ (or potentially D-) pullup.  The host will start
  * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */

drivers/usb/gadget/udc/dummy_hcd.c

@@ -2118,9 +2118,21 @@ static int dummy_hub_control(
 				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
 			set_link_state(dum_hcd);
 			break;
-		default:
+		case USB_PORT_FEAT_ENABLE:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			fallthrough;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
 			dum_hcd->port_status &= ~(1 << wValue);
 			set_link_state(dum_hcd);
+			break;
+		default:
+		/* Disallow INDICATOR and C_OVER_CURRENT */
+			goto error;
 		}
 		break;
 	case GetHubDescriptor:
@@ -2281,18 +2293,17 @@ static int dummy_hub_control(
 			 */
 			dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
 			fallthrough;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3, and ignored for USB-2 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			break;
 		default:
-			if (hcd->speed == HCD_USB3) {
-				if ((dum_hcd->port_status &
-				     USB_SS_PORT_STAT_POWER) != 0) {
-					dum_hcd->port_status |= (1 << wValue);
-				}
-			} else
-				if ((dum_hcd->port_status &
-				     USB_PORT_STAT_POWER) != 0) {
-					dum_hcd->port_status |= (1 << wValue);
-				}
-			set_link_state(dum_hcd);
+		/* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
+			goto error;
 		}
 		break;
 	case GetPortErrorCount:

drivers/usb/gadget/udc/fsl_mxc_udc.c

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Description:
- * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
- * driver to function correctly on these systems.
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fsl_devices.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "fsl_usb2_udc.h"
-
-static struct clk *mxc_ahb_clk;
-static struct clk *mxc_per_clk;
-static struct clk *mxc_ipg_clk;
-
-/* workaround ENGcm09152 for i.MX35 */
-#define MX35_USBPHYCTRL_OFFSET		0x600
-#define USBPHYCTRL_OTGBASE_OFFSET	0x8
-#define USBPHYCTRL_EVDO			(1 << 23)
-
-int fsl_udc_clk_init(struct platform_device *pdev)
-{
-	struct fsl_usb2_platform_data *pdata;
-	unsigned long freq;
-	int ret;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(mxc_ipg_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
-		return PTR_ERR(mxc_ipg_clk);
-	}
-
-	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
-	if (IS_ERR(mxc_ahb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
-		return PTR_ERR(mxc_ahb_clk);
-	}
-
-	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
-	if (IS_ERR(mxc_per_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
-		return PTR_ERR(mxc_per_clk);
-	}
-
-	clk_prepare_enable(mxc_ipg_clk);
-	clk_prepare_enable(mxc_ahb_clk);
-	clk_prepare_enable(mxc_per_clk);
-
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
-		freq = clk_get_rate(mxc_per_clk);
-		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
-		    (freq < 59999000 || freq > 60001000)) {
-			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
-			ret = -EINVAL;
-			goto eclkrate;
-		}
-	}
-
-	return 0;
-
-eclkrate:
-	clk_disable_unprepare(mxc_ipg_clk);
-	clk_disable_unprepare(mxc_ahb_clk);
-	clk_disable_unprepare(mxc_per_clk);
-	mxc_per_clk = NULL;
-	return ret;
-}
-
-int fsl_udc_clk_finalize(struct platform_device *pdev)
-{
-	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret = 0;
-
-	/* workaround ENGcm09152 for i.MX35 */
-	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-		unsigned int v;
-		struct resource *res = platform_get_resource
-			(pdev, IORESOURCE_MEM, 0);
-		void __iomem *phy_regs = ioremap(res->start +
-						MX35_USBPHYCTRL_OFFSET, 512);
-		if (!phy_regs) {
-			dev_err(&pdev->dev, "ioremap for phy address fails\n");
-			ret = -EINVAL;
-			goto ioremap_err;
-		}
-
-		v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
-		writel(v | USBPHYCTRL_EVDO,
-			phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
-
-		iounmap(phy_regs);
-	}
-
-
-ioremap_err:
-	/* ULPI transceivers don't need usbpll */
-	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable_unprepare(mxc_per_clk);
-		mxc_per_clk = NULL;
-	}
-
-	return ret;
-}
-
-void fsl_udc_clk_release(void)
-{
-	if (mxc_per_clk)
-		clk_disable_unprepare(mxc_per_clk);
-	clk_disable_unprepare(mxc_ahb_clk);
-	clk_disable_unprepare(mxc_ipg_clk);
-}

drivers/usb/host/xhci.c

@@ -4770,19 +4770,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
 	/* Prevent U1 if service interval is shorter than U1 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
-	else
-		timeout_ns = udev->u1_params.sel;
-
 	/* The U1 timeout is encoded in 1us intervals.
 	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
 	 */
@@ -4834,19 +4834,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
 	/* Prevent U2 if service interval is shorter than U2 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
-	else
-		timeout_ns = udev->u2_params.sel;
-
 	/* The U2 timeout is encoded in 256us intervals */
 	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
 	/* If the necessary timeout value is bigger than what we can set in the

drivers/usb/misc/yurex.c

@@ -496,6 +496,9 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer,
 		timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
 	finish_wait(&dev->waitq, &wait);
 
+	/* make sure URB is idle after timeout or (spurious) CMD_ACK */
+	usb_kill_urb(dev->cntl_urb);
+
 	mutex_unlock(&dev->io_mutex);
 
 	if (retval < 0) {

drivers/usb/serial/iuu_phoenix.c

@@ -532,23 +532,29 @@ static int iuu_uart_flush(struct usb_serial_port *port)
 	struct device *dev = &port->dev;
 	int i;
 	int status;
-	u8 rxcmd = IUU_UART_RX;
+	u8 *rxcmd;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
 		return -EIO;
 
+	rxcmd = kmalloc(1, GFP_KERNEL);
+	if (!rxcmd)
+		return -ENOMEM;
+
+	rxcmd[0] = IUU_UART_RX;
+
 	for (i = 0; i < 2; i++) {
-		status = bulk_immediate(port, &rxcmd, 1);
+		status = bulk_immediate(port, rxcmd, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_write error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		status = read_immediate(port, &priv->len, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		if (priv->len > 0) {
@@ -556,12 +562,16 @@ static int iuu_uart_flush(struct usb_serial_port *port)
 			status = read_immediate(port, priv->buf, priv->len);
 			if (status != IUU_OPERATION_OK) {
 				dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-				return status;
+				goto out_free;
 			}
 		}
 	}
 	dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__);
 	iuu_led(port, 0, 0xF000, 0, 0xFF);
+
+out_free:
+	kfree(rxcmd);
+
 	return status;
 }
 

drivers/usb/serial/option.c

@@ -1117,6 +1117,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) },	/* EM160R-GL */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
@@ -2057,6 +2059,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */

drivers/usb/storage/unusual_uas.h

@@ -90,6 +90,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA),
 
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
+		"PNY",
+		"Pro Elite SSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
 /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
 UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
 		"PNY",

drivers/usb/typec/altmodes/Kconfig

@@ -20,6 +20,6 @@ config TYPEC_NVIDIA_ALTMODE
 	  to enable support for VirtualLink devices with NVIDIA GPUs.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called typec_displayport.
+	  module will be called typec_nvidia.
 
 endmenu

drivers/usb/typec/class.c

@@ -766,6 +766,7 @@ int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmod
 		return ret;
 
 	sysfs_notify(&partner->dev.kobj, NULL, "number_of_alternate_modes");
+	kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE);
 
 	return 0;
 }
@@ -923,6 +924,7 @@ int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes)
 		return ret;
 
 	sysfs_notify(&plug->dev.kobj, NULL, "number_of_alternate_modes");
+	kobject_uevent(&plug->dev.kobj, KOBJ_CHANGE);
 
 	return 0;
 }

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -207,10 +207,21 @@ static int
 pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp)
 {
 	u8 msg[2] = { };
+	int ret;
 
 	msg[0] = PMC_USB_DP_HPD;
 	msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
 
+	/* Configure HPD first if HPD,IRQ comes together */
+	if (!IOM_PORT_HPD_ASSERTED(port->iom_status) &&
+	    dp->status & DP_STATUS_IRQ_HPD &&
+	    dp->status & DP_STATUS_HPD_STATE) {
+		msg[1] = PMC_USB_DP_HPD_LVL;
+		ret = pmc_usb_command(port, msg, sizeof(msg));
+		if (ret)
+			return ret;
+	}
+
 	if (dp->status & DP_STATUS_IRQ_HPD)
 		msg[1] = PMC_USB_DP_HPD_IRQ;
 

drivers/usb/usbip/vhci_hcd.c

@@ -396,6 +396,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		default:
 			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 					  wValue);
+			if (wValue >= 32)
+				goto error;
 			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
 			break;
 		}

include/linux/kcov.h

@@ -52,6 +52,25 @@ static inline void kcov_remote_start_usb(u64 id)
 	kcov_remote_start(kcov_remote_handle(KCOV_SUBSYSTEM_USB, id));
 }
 
+/*
+ * The softirq flavor of kcov_remote_*() functions is introduced as a temporary
+ * work around for kcov's lack of nested remote coverage sections support in
+ * task context. Adding suport for nested sections is tracked in:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=210337
+ */
+
+static inline void kcov_remote_start_usb_softirq(u64 id)
+{
+	if (in_serving_softirq())
+		kcov_remote_start_usb(id);
+}
+
+static inline void kcov_remote_stop_softirq(void)
+{
+	if (in_serving_softirq())
+		kcov_remote_stop();
+}
+
 #else
 
 static inline void kcov_task_init(struct task_struct *t) {}
@@ -66,6 +85,8 @@ static inline u64 kcov_common_handle(void)
 }
 static inline void kcov_remote_start_common(u64 id) {}
 static inline void kcov_remote_start_usb(u64 id) {}
+static inline void kcov_remote_start_usb_softirq(u64 id) {}
+static inline void kcov_remote_stop_softirq(void) {}
 
 #endif /* CONFIG_KCOV */
 #endif /* _LINUX_KCOV_H */