arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes

Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -1105,7 +1105,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 				};
@@ -1140,7 +1140,7 @@ opp-384000000 {
 				};
 			};
 
-			dsi0: dsi@5e94000 {
+			mdss_dsi0: dsi@5e94000 {
 				compatible = "qcom,dsi-ctrl-6g-qcm2290";
 				reg = <0x05e94000 0x400>;
 				reg-names = "dsi_ctrl";
@@ -1163,11 +1163,11 @@ dsi0: dsi@5e94000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1180,14 +1180,14 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -1212,7 +1212,7 @@ opp-187500000 {
 				};
 			};
 
-			dsi0_phy: phy@5e94400 {
+			mdss_dsi0_phy: phy@5e94400 {
 				compatible = "qcom,dsi-phy-14nm-2290";
 				reg = <0x05e94400 0x100>,
 				      <0x05e94500 0x300>,
@@ -1237,8 +1237,8 @@ dispcc: clock-controller@5f00000 {
 			reg = <0x05f00000 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&dsi0_phy 0>,
-				 <&dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;