ARM: NUC900: Add spi driver support for nuc900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

arch/arm/mach-w90x900/include/mach/nuc900_spi.h

+/*
+ * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H
+
+extern void mfp_set_groupg(struct device *dev);
+
+struct nuc900_spi_info {
+	unsigned int num_cs;
+	unsigned int lsb;
+	unsigned int txneg;
+	unsigned int rxneg;
+	unsigned int divider;
+	unsigned int sleep;
+	unsigned int txnum;
+	unsigned int txbitlen;
+	int bus_num;
+};
+
+struct nuc900_spi_chip {
+	unsigned char bits_per_word;
+};
+
+#endif /* __ASM_ARCH_SPI_H */

drivers/spi/Kconfig

@@ -275,6 +275,13 @@ config SPI_XILINX_PLTFM
 	  This is the platform driver for the SPI controller IP
 	  from the Xilinx EDK.
 
+config SPI_NUC900
+	tristate "Nuvoton NUC900 series SPI"
+	depends on ARCH_W90X900 && EXPERIMENTAL
+	select SPI_BITBANG
+	help
+	  SPI driver for Nuvoton NUC900 series ARM SoCs
+
 #
 # Add new SPI master controllers in alphabetical order above this line
 #

drivers/spi/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_SPI_XILINX_PLTFM)		+= xilinx_spi_pltfm.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
 obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
+obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)