ARM: zynq: make use of debug_ll_io_init()

Convert low-level debugging routines to make use of debug_ll_io_init().
This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq.
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>

arch/arm/Kconfig.debug

@@ -435,6 +435,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
 
 config EARLY_PRINTK

arch/arm/mach-zynq/include/mach/debug-macro.S → arch/arm/include/debug/zynq.S

-/* arch/arm/mach-zynq/include/mach/debug-macro.S
- *
+/*
  * Debugging macro include header
  *
  *  Copyright (C) 2011 Xilinx

arch/arm/mach-zynq/common.c

@@ -72,23 +72,11 @@ static void __init xilinx_irq_init(void)
  * running include the GIC, UART and Timer Counter.
  */
 
-static struct map_desc io_desc[] __initdata = {
-	{
-		.virtual	= SCU_PERIPH_VIRT,
-		.pfn		= __phys_to_pfn(SCU_PERIPH_PHYS),
-		.length		= SCU_PERIPH_SIZE,
-		.type		= MT_DEVICE,
-	},
-
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= LL_UART_VADDR,
-		.pfn		= __phys_to_pfn(LL_UART_PADDR),
-		.length		= UART_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
-
+static struct map_desc scu_desc __initdata = {
+	.virtual	= SCU_PERIPH_VIRT,
+	.pfn		= __phys_to_pfn(SCU_PERIPH_PHYS),
+	.length		= SCU_PERIPH_SIZE,
+	.type		= MT_DEVICE,
 };
 
 static void __init xilinx_zynq_timer_init(void)
@@ -117,7 +105,8 @@ static struct sys_timer xttcpss_sys_timer = {
  */
 static void __init xilinx_map_io(void)
 {
-	iotable_init(io_desc, ARRAY_SIZE(io_desc));
+	debug_ll_io_init();
+	iotable_init(&scu_desc, 1);
 }
 
 static const char *xilinx_dt_match[] = {