Commit 401d0069 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6

* 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6:
  viafb: correct sync polarity for OLPC DCON
  video:da8xx-fb: Disable and reset sequence on version2 of LCDC
  OMAPDSS: DISPC: skip scaling calculations when not scaling
  OMAPFB: fix compilation warnings due to missing include
  OMAPDSS: HDMI: fix returned HDMI pixel clock
parents 06718f15 a3283969
......@@ -116,6 +116,7 @@
/* Clock registers available only on Version 2 */
#define LCD_CLK_ENABLE_REG 0x6c
#define LCD_CLK_RESET_REG 0x70
#define LCD_CLK_MAIN_RESET BIT(3)
#define LCD_NUM_BUFFERS 2
......@@ -244,6 +245,10 @@ static inline void lcd_enable_raster(void)
{
u32 reg;
/* Bring LCDC out of reset */
if (lcd_revision == LCD_VERSION_2)
lcdc_write(0, LCD_CLK_RESET_REG);
reg = lcdc_read(LCD_RASTER_CTRL_REG);
if (!(reg & LCD_RASTER_ENABLE))
lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
......@@ -257,6 +262,10 @@ static inline void lcd_disable_raster(void)
reg = lcdc_read(LCD_RASTER_CTRL_REG);
if (reg & LCD_RASTER_ENABLE)
lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
if (lcd_revision == LCD_VERSION_2)
/* Write 1 to reset LCDC */
lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
}
static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
......@@ -584,8 +593,12 @@ static void lcd_reset(struct da8xx_fb_par *par)
lcdc_write(0, LCD_DMA_CTRL_REG);
lcdc_write(0, LCD_RASTER_CTRL_REG);
if (lcd_revision == LCD_VERSION_2)
if (lcd_revision == LCD_VERSION_2) {
lcdc_write(0, LCD_INT_ENABLE_SET_REG);
/* Write 1 to reset */
lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
lcdc_write(0, LCD_CLK_RESET_REG);
}
}
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
......
......@@ -19,6 +19,7 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
......
......@@ -1720,12 +1720,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
unsigned long fclk = 0;
if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
if (width != out_width || height != out_height)
return -EINVAL;
else
return 0;
}
if (width == out_width && height == out_height)
return 0;
if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
return -EINVAL;
if (out_width < width / maxdownscale ||
out_width > width * 8)
......
......@@ -269,7 +269,7 @@ static void update_hdmi_timings(struct hdmi_config *cfg,
unsigned long hdmi_get_pixel_clock(void)
{
/* HDMI Pixel Clock in Mhz */
return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000;
return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000;
}
static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
......
......@@ -559,8 +559,8 @@
#define M1200X720_R60_VSP POSITIVE
/* 1200x900@60 Sync Polarity (DCON) */
#define M1200X900_R60_HSP NEGATIVE
#define M1200X900_R60_VSP NEGATIVE
#define M1200X900_R60_HSP POSITIVE
#define M1200X900_R60_VSP POSITIVE
/* 1280x600@60 Sync Polarity (GTF Mode) */
#define M1280x600_R60_HSP NEGATIVE
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment