Skip to content

L
linux
Commit 5d9331b4 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'imx-dt64-6.8' of... 

Merge tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree for 6.8:

- New board support: MBa93xxCA starter kit, LX2160A based MBLX2160A,
  Dimonoff Gateway EVK, Verdin i.MX8M based Mallow, and SKOV i.MX8MP revB.
- A set of changes from Adam Ford to enable MIPI_DSI, overdrive mode and
  NPU support for Beacon i.MX8M boards.
- A number of changes from Alexander Stein to add CCM interrupts for
  CCM, 'chassis-type' property, and enable VPU and LVDS display for
  TQ-Systems boards.
- i.MX93 update for AUDIO, I3C, ANATOP and uSDHC.
- A couple of changes from David Heidelberg to correct dt-schema check
  errors for 'fsl,tmu-calibration' and 'gpio-fan,speed-map'.
- A bunch of nice dt-schema check fix-ups from Fabio Estevam.
- A couple of debix-som update from Kieran Bingham adding heartbeat LED
  and CSI power regulators.
- White-space cleanup from Krzysztof Kozlowski.
- Add display support for imx8mn-bsh-smm-s2/pro board.
- A series from Tim Harvey to add TPM support for i.MX8M Venice devices.

* tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
  arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
  arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
  arm64: dts: imx8qxp: Add VPU subsystem file
  arm64: dts: imx8qxp-mek: Move port under USB connector
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
  arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
  arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
  arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
  arm64: dts: imx8mp-venice: Fix USB connector description
  arm64: dts: imx8mp-verdin: Fix USB connector description
  arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
  arm64: dts: imx8mn-evk: Move port under USB connector
  arm64: dts: imx8mm-evk: Move port under USB connector
  arm64: dts: freescale: introduce dimonoff-gateway-evk board
  arm64: dts: imx8m*-tqma8m*: Add chassis-type
  arm64: dts: imx8mn-beacon: Support overdrive mode
  arm64: dts: imx8mn: Enable Overdrive mode
  arm64: dts: imx8mm-beacon: Enable overdrive mode
  arm64: dts: imx8mm: Add optional overdrive DTSI
  arm64: dts: imx8mm: Reduce GPU to nominal speed
  ...

Link: https://lore.kernel.org/r/20231216064605.876196-5-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 8c5ce909 f43c3a62
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 4326 additions and 389 deletions
arch/arm64/boot/dts/freescale/Makefile
View file @ 5d9331b4
......@@ -53,6 +53,32 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
......@@ -84,9 +110,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
......@@ -95,9 +123,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
......@@ -115,6 +145,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
......@@ -123,13 +156,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
......@@ -164,6 +201,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
......
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
View file @ 5d9331b4
......@@ -307,46 +307,46 @@ tmu: tmu@1f00000 {
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
fsl,tmu-calibration = <0x00000000 0x00000025
0x00000001 0x0000002c
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004c
0x00000007 0x00000053
0x00000008 0x00000059
0x00000009 0x0000005f
0x0000000a 0x00000066
0x0000000b 0x0000006c
0x00010000 0x00000026
0x00010001 0x0000002d
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004d
0x00010006 0x00000055
0x00010007 0x0000005d
0x00010008 0x00000065
0x00010009 0x0000006d
0x00020000 0x00000026
0x00020001 0x00000030
0x00020002 0x0000003a
0x00020003 0x00000044
0x00020004 0x0000004e
0x00020005 0x00000059
0x00020006 0x00000063
0x00030000 0x00000014
0x00030001 0x00000021
0x00030002 0x0000002e
0x00030003 0x0000003a
0x00030004 0x00000047
0x00030005 0x00000053
0x00030006 0x00000060>;
big-endian;
fsl,tmu-calibration =
<0x00000000 0x00000025>,
<0x00000001 0x0000002c>,
<0x00000002 0x00000032>,
<0x00000003 0x00000039>,
<0x00000004 0x0000003f>,
<0x00000005 0x00000046>,
<0x00000006 0x0000004c>,
<0x00000007 0x00000053>,
<0x00000008 0x00000059>,
<0x00000009 0x0000005f>,
<0x0000000a 0x00000066>,
<0x0000000b 0x0000006c>,
<0x00010000 0x00000026>,
<0x00010001 0x0000002d>,
<0x00010002 0x00000035>,
<0x00010003 0x0000003d>,
<0x00010004 0x00000045>,
<0x00010005 0x0000004d>,
<0x00010006 0x00000055>,
<0x00010007 0x0000005d>,
<0x00010008 0x00000065>,
<0x00010009 0x0000006d>,
<0x00020000 0x00000026>,
<0x00020001 0x00000030>,
<0x00020002 0x0000003a>,
<0x00020003 0x00000044>,
<0x00020004 0x0000004e>,
<0x00020005 0x00000059>,
<0x00020006 0x00000063>,
<0x00030000 0x00000014>,
<0x00030001 0x00000021>,
<0x00030002 0x0000002e>,
<0x00030003 0x0000003a>,
<0x00030004 0x00000047>,
<0x00030005 0x00000053>,
<0x00030006 0x00000060>;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View file @ 5d9331b4
......@@ -1026,49 +1026,50 @@ tmu: tmu@1f80000 {
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
fsl,tmu-calibration = <0x00000000 0x00000024
0x00000001 0x0000002b
0x00000002 0x00000031
0x00000003 0x00000038
0x00000004 0x0000003f
0x00000005 0x00000045
0x00000006 0x0000004c
0x00000007 0x00000053
0x00000008 0x00000059
0x00000009 0x00000060
0x0000000a 0x00000066
0x0000000b 0x0000006d
0x00010000 0x0000001c
0x00010001 0x00000024
0x00010002 0x0000002c
0x00010003 0x00000035
0x00010004 0x0000003d
0x00010005 0x00000045
0x00010006 0x0000004d
0x00010007 0x00000055
0x00010008 0x0000005e
0x00010009 0x00000066
0x0001000a 0x0000006e
0x00020000 0x00000018
0x00020001 0x00000022
0x00020002 0x0000002d
0x00020003 0x00000038
0x00020004 0x00000043
0x00020005 0x0000004d
0x00020006 0x00000058
0x00020007 0x00000063
0x00020008 0x0000006e
0x00030000 0x00000010
0x00030001 0x0000001c
0x00030002 0x00000029
0x00030003 0x00000036
0x00030004 0x00000042
0x00030005 0x0000004f
0x00030006 0x0000005b
0x00030007 0x00000068>;
fsl,tmu-calibration =
<0x00000000 0x00000024>,
<0x00000001 0x0000002b>,
<0x00000002 0x00000031>,
<0x00000003 0x00000038>,
<0x00000004 0x0000003f>,
<0x00000005 0x00000045>,
<0x00000006 0x0000004c>,
<0x00000007 0x00000053>,
<0x00000008 0x00000059>,
<0x00000009 0x00000060>,
<0x0000000a 0x00000066>,
<0x0000000b 0x0000006d>,
<0x00010000 0x0000001c>,
<0x00010001 0x00000024>,
<0x00010002 0x0000002c>,
<0x00010003 0x00000035>,
<0x00010004 0x0000003d>,
<0x00010005 0x00000045>,
<0x00010006 0x0000004d>,
<0x00010007 0x00000055>,
<0x00010008 0x0000005e>,
<0x00010009 0x00000066>,
<0x0001000a 0x0000006e>,
<0x00020000 0x00000018>,
<0x00020001 0x00000022>,
<0x00020002 0x0000002d>,
<0x00020003 0x00000038>,
<0x00020004 0x00000043>,
<0x00020005 0x0000004d>,
<0x00020006 0x00000058>,
<0x00020007 0x00000063>,
<0x00020008 0x0000006e>,
<0x00030000 0x00000010>,
<0x00030001 0x0000001c>,
<0x00030002 0x00000029>,
<0x00030003 0x00000036>,
<0x00030004 0x00000042>,
<0x00030005 0x0000004f>,
<0x00030006 0x0000005b>,
<0x00030007 0x00000068>;
little-endian;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
View file @ 5d9331b4
......@@ -447,46 +447,47 @@ tmu: tmu@1f00000 {
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration = <0x00000000 0x00000023
0x00000001 0x0000002a
0x00000002 0x00000031
0x00000003 0x00000037
0x00000004 0x0000003e
0x00000005 0x00000044
0x00000006 0x0000004b
0x00000007 0x00000051
0x00000008 0x00000058
0x00000009 0x0000005e
0x0000000a 0x00000065
0x0000000b 0x0000006b
0x00010000 0x00000023
0x00010001 0x0000002b
0x00010002 0x00000033
0x00010003 0x0000003b
0x00010004 0x00000043
0x00010005 0x0000004b
0x00010006 0x00000054
0x00010007 0x0000005c
0x00010008 0x00000064
0x00010009 0x0000006c
0x00020000 0x00000021
0x00020001 0x0000002c
0x00020002 0x00000036
0x00020003 0x00000040
0x00020004 0x0000004b
0x00020005 0x00000055
0x00020006 0x0000005f
0x00030000 0x00000013
0x00030001 0x0000001d
0x00030002 0x00000028
0x00030003 0x00000032
0x00030004 0x0000003d
0x00030005 0x00000047
0x00030006 0x00000052
0x00030007 0x0000005c>;
fsl,tmu-calibration =
<0x00000000 0x00000023>,
<0x00000001 0x0000002a>,
<0x00000002 0x00000031>,
<0x00000003 0x00000037>,
<0x00000004 0x0000003e>,
<0x00000005 0x00000044>,
<0x00000006 0x0000004b>,
<0x00000007 0x00000051>,
<0x00000008 0x00000058>,
<0x00000009 0x0000005e>,
<0x0000000a 0x00000065>,
<0x0000000b 0x0000006b>,
<0x00010000 0x00000023>,
<0x00010001 0x0000002b>,
<0x00010002 0x00000033>,
<0x00010003 0x0000003b>,
<0x00010004 0x00000043>,
<0x00010005 0x0000004b>,
<0x00010006 0x00000054>,
<0x00010007 0x0000005c>,
<0x00010008 0x00000064>,
<0x00010009 0x0000006c>,
<0x00020000 0x00000021>,
<0x00020001 0x0000002c>,
<0x00020002 0x00000036>,
<0x00020003 0x00000040>,
<0x00020004 0x0000004b>,
<0x00020005 0x00000055>,
<0x00020006 0x0000005f>,
<0x00030000 0x00000013>,
<0x00030001 0x0000001d>,
<0x00030002 0x00000028>,
<0x00030003 0x00000032>,
<0x00030004 0x0000003d>,
<0x00030005 0x00000047>,
<0x00030006 0x00000052>,
<0x00030007 0x0000005c>;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
View file @ 5d9331b4
......@@ -445,46 +445,46 @@ tmu: tmu@1f00000 {
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
<0x00000000 0x00000023
0x00000001 0x00000029
0x00000002 0x0000002f
0x00000003 0x00000036
0x00000004 0x0000003c
0x00000005 0x00000042
0x00000006 0x00000049
0x00000007 0x0000004f
0x00000008 0x00000055
0x00000009 0x0000005c
0x0000000a 0x00000062
0x0000000b 0x00000068
<0x00000000 0x00000023>,
<0x00000001 0x00000029>,
<0x00000002 0x0000002f>,
<0x00000003 0x00000036>,
<0x00000004 0x0000003c>,
<0x00000005 0x00000042>,
<0x00000006 0x00000049>,
<0x00000007 0x0000004f>,
<0x00000008 0x00000055>,
<0x00000009 0x0000005c>,
<0x0000000a 0x00000062>,
<0x0000000b 0x00000068>,
/* Calibration data group 2 */
0x00010000 0x00000022
0x00010001 0x0000002a
0x00010002 0x00000032
0x00010003 0x0000003a
0x00010004 0x00000042
0x00010005 0x0000004a
0x00010006 0x00000052
0x00010007 0x0000005a
0x00010008 0x00000062
0x00010009 0x0000006a
<0x00010000 0x00000022>,
<0x00010001 0x0000002a>,
<0x00010002 0x00000032>,
<0x00010003 0x0000003a>,
<0x00010004 0x00000042>,
<0x00010005 0x0000004a>,
<0x00010006 0x00000052>,
<0x00010007 0x0000005a>,
<0x00010008 0x00000062>,
<0x00010009 0x0000006a>,
/* Calibration data group 3 */
0x00020000 0x00000021
0x00020001 0x0000002b
0x00020002 0x00000035
0x00020003 0x0000003e
0x00020004 0x00000048
0x00020005 0x00000052
0x00020006 0x0000005c
<0x00020000 0x00000021>,
<0x00020001 0x0000002b>,
<0x00020002 0x00000035>,
<0x00020003 0x0000003e>,
<0x00020004 0x00000048>,
<0x00020005 0x00000052>,
<0x00020006 0x0000005c>,
/* Calibration data group 4 */
0x00030000 0x00000011
0x00030001 0x0000001a
0x00030002 0x00000024
0x00030003 0x0000002e
0x00030004 0x00000038
0x00030005 0x00000042
0x00030006 0x0000004c
0x00030007 0x00000056>;
<0x00030000 0x00000011>,
<0x00030001 0x0000001a>,
<0x00030002 0x00000024>,
<0x00030003 0x0000002e>,
<0x00030004 0x00000038>,
<0x00030005 0x00000042>,
<0x00030006 0x0000004c>,
<0x00030007 0x00000056>;
big-endian;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
View file @ 5d9331b4
......@@ -284,46 +284,46 @@ tmu: tmu@1f80000 {
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
<0x00000000 0x00000023
0x00000001 0x0000002a
0x00000002 0x00000030
0x00000003 0x00000037
0x00000004 0x0000003d
0x00000005 0x00000044
0x00000006 0x0000004a
0x00000007 0x00000051
0x00000008 0x00000057
0x00000009 0x0000005e
0x0000000a 0x00000064
0x0000000b 0x0000006b
<0x00000000 0x00000023>,
<0x00000001 0x0000002a>,
<0x00000002 0x00000030>,
<0x00000003 0x00000037>,
<0x00000004 0x0000003d>,
<0x00000005 0x00000044>,
<0x00000006 0x0000004a>,
<0x00000007 0x00000051>,
<0x00000008 0x00000057>,
<0x00000009 0x0000005e>,
<0x0000000a 0x00000064>,
<0x0000000b 0x0000006b>,
/* Calibration data group 2 */
0x00010000 0x00000022
0x00010001 0x0000002a
0x00010002 0x00000032
0x00010003 0x0000003a
0x00010004 0x00000042
0x00010005 0x0000004a
0x00010006 0x00000052
0x00010007 0x0000005a
0x00010008 0x00000062
0x00010009 0x0000006a
<0x00010000 0x00000022>,
<0x00010001 0x0000002a>,
<0x00010002 0x00000032>,
<0x00010003 0x0000003a>,
<0x00010004 0x00000042>,
<0x00010005 0x0000004a>,
<0x00010006 0x00000052>,
<0x00010007 0x0000005a>,
<0x00010008 0x00000062>,
<0x00010009 0x0000006a>,
/* Calibration data group 3 */
0x00020000 0x00000021
0x00020001 0x0000002b
0x00020002 0x00000035
0x00020003 0x00000040
0x00020004 0x0000004a
0x00020005 0x00000054
0x00020006 0x0000005e
<0x00020000 0x00000021>,
<0x00020001 0x0000002b>,
<0x00020002 0x00000035>,
<0x00020003 0x00000040>,
<0x00020004 0x0000004a>,
<0x00020005 0x00000054>,
<0x00020006 0x0000005e>,
/* Calibration data group 4 */
0x00030000 0x00000010
0x00030001 0x0000001c
0x00030002 0x00000027
0x00030003 0x00000032
0x00030004 0x0000003e
0x00030005 0x00000049
0x00030006 0x00000054
0x00030007 0x00000060>;
<0x00030000 0x00000010>,
<0x00030001 0x0000001c>,
<0x00030002 0x00000027>,
<0x00030003 0x00000032>,
<0x00030004 0x0000003e>,
<0x00030005 0x00000049>,
<0x00030006 0x00000054>,
<0x00030007 0x00000060>;
little-endian;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
View file @ 5d9331b4
......@@ -321,42 +321,43 @@ tmu: tmu@1f80000 {
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
fsl,tmu-calibration = <0x00000000 0x00000026
0x00000001 0x0000002d
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004d
0x00000007 0x00000054
0x00000008 0x0000005a
0x00000009 0x00000061
0x0000000a 0x0000006a
0x0000000b 0x00000071
0x00010000 0x00000025
0x00010001 0x0000002c
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004e
0x00010006 0x00000057
0x00010007 0x00000061
0x00010008 0x0000006b
0x00010009 0x00000076
0x00020000 0x00000029
0x00020001 0x00000033
0x00020002 0x0000003d
0x00020003 0x00000049
0x00020004 0x00000056
0x00020005 0x00000061
0x00020006 0x0000006d
0x00030000 0x00000021
0x00030001 0x0000002a
0x00030002 0x0000003c
0x00030003 0x0000004e>;
fsl,tmu-calibration =
<0x00000000 0x00000026>,
<0x00000001 0x0000002d>,
<0x00000002 0x00000032>,
<0x00000003 0x00000039>,
<0x00000004 0x0000003f>,
<0x00000005 0x00000046>,
<0x00000006 0x0000004d>,
<0x00000007 0x00000054>,
<0x00000008 0x0000005a>,
<0x00000009 0x00000061>,
<0x0000000a 0x0000006a>,
<0x0000000b 0x00000071>,
<0x00010000 0x00000025>,
<0x00010001 0x0000002c>,
<0x00010002 0x00000035>,
<0x00010003 0x0000003d>,
<0x00010004 0x00000045>,
<0x00010005 0x0000004e>,
<0x00010006 0x00000057>,
<0x00010007 0x00000061>,
<0x00010008 0x0000006b>,
<0x00010009 0x00000076>,
<0x00020000 0x00000029>,
<0x00020001 0x00000033>,
<0x00020002 0x0000003d>,
<0x00020003 0x00000049>,
<0x00020004 0x00000056>,
<0x00020005 0x00000061>,
<0x00020006 0x0000006d>,
<0x00030000 0x00000021>,
<0x00030001 0x0000002a>,
<0x00030002 0x0000003c>,
<0x00030003 0x0000004e>;
little-endian;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "fsl-lx2160a-tqmlx2160a.dtsi"
/ {
model = "TQ Systems GmbH MBLX2160A Starterkit";
compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
"fsl,lx2160a";
aliases {
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
};
chosen {
stdout-path = &uart0;
};
gpio-keys {
compatible = "gpio-keys";
button-user1 {
label = "button:user1";
gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F1>;
};
button-user2 {
label = "button:user2";
gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F2>;
};
};
leds {
compatible = "gpio-leds";
led-user1 {
gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_HEARTBEAT;
function-enumerator = <0>;
linux,default-trigger = "heartbeat";
};
led-user2 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_HEARTBEAT;
function-enumerator = <1>;
linux,default-trigger = "heartbeat";
};
};
sfp_xfi1: sfp-xfi1 {
compatible = "sff,sfp";
i2c-bus = <&xfi1_i2c>;
mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
sfp_xfi2: sfp-xfi2 {
compatible = "sff,sfp";
i2c-bus = <&xfi2_i2c>;
mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&dpmac17 {
phy-handle = <&dp83867_2_3>;
phy-connection-type = "rgmii-id";
};
&dpmac18 {
phy-handle = <&dp83867_2_4>;
phy-connection-type = "rgmii-id";
};
&emdio1 {
status = "okay";
dp83867_1_1: ethernet-phy@1 {
reg = <1>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_1_2: ethernet-phy@2 {
reg = <2>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_1_3: ethernet-phy@3 {
reg = <3>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_1_4: ethernet-phy@4 {
reg = <4>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_1_5: ethernet-phy@5 {
reg = <5>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_1_6: ethernet-phy@6 {
reg = <6>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
&emdio2 {
status = "okay";
dp83867_2_1: ethernet-phy@1 {
reg = <1>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_2_2: ethernet-phy@2 {
reg = <2>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_2_3: ethernet-phy@3 {
reg = <3>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
dp83867_2_4: ethernet-phy@4 {
reg = <4>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
sd-uhs-sdr25;
sd-uhs-sdr12;
no-mmc;
no-sdio;
wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c0 {
gpioex3: gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
vcc-supply = <&reg_vcc3v3>;
};
};
&i2c4 {
status = "okay";
mux@70 {
compatible = "nxp,pca9544";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
vdd-supply = <&reg_vcc3v3>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
gpioex0: gpio@20 {
compatible = "nxp,pca9555";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
vcc-supply = <&reg_vcc3v3>;
};
gpioex1: gpio@21 {
compatible = "nxp,pca9555";
reg = <0x21>;
#gpio-cells = <2>;
gpio-controller;
vcc-supply = <&reg_vcc3v3>;
};
gpioex2: gpio@22 {
compatible = "nxp,pca9555";
reg = <0x22>;
#gpio-cells = <2>;
gpio-controller;
vcc-supply = <&reg_vcc3v3>;
};
};
i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&i2c5 {
status = "okay";
mux@70 {
compatible = "nxp,pca9544";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
vdd-supply = <&reg_vcc3v3>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
xfi1_i2c: i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
xfi2_i2c: i2c@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&pcs_mdio17 {
status = "okay";
};
&pcs_mdio18 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_2_0: hub@1 {
compatible = "usb451,8142";
reg = <1>;
peer-hub = <&hub_3_0>;
reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
vcc-supply = <&reg_vcc3v3>;
};
hub_3_0: hub@2 {
compatible = "usb451,8140";
reg = <2>;
peer-hub = <&hub_2_0>;
reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
vcc-supply = <&reg_vcc3v3>;
};
};
&usb1 {
dr_mode = "otg";
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
/plugin/;
&dpmac9 {
phy-handle = <&dp83867_2_1>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&dpmac10 {
phy-handle = <&dp83867_2_2>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&pcs_mdio9 {
status = "okay";
};
&pcs_mdio10 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
/plugin/;
&dpmac1 {
managed = "in-band-status";
};
&pcs_mdio1 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
/plugin/;
&dpmac12 {
phy-handle = <&dp83867_1_1>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&dpmac13 {
phy-handle = <&dp83867_1_5>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&dpmac14 {
phy-handle = <&dp83867_1_6>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&dpmac16 {
phy-handle = <&dp83867_1_4>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&pcs_mdio12 {
status = "okay";
};
&pcs_mdio13 {
status = "okay";
};
&pcs_mdio14 {
status = "okay";
};
&pcs_mdio16 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
/plugin/;
&dpmac12 {
phy-handle = <&dp83867_1_1>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&dpmac13 {
sfp = <&sfp_xfi1>;
managed = "in-band-status";
};
&dpmac14 {
sfp = <&sfp_xfi2>;
managed = "in-band-status";
};
&dpmac16 {
phy-handle = <&dp83867_1_4>;
phy-connection-type = "sgmii";
managed = "in-band-status";
};
&pcs_mdio12 {
status = "okay";
};
&pcs_mdio13 {
status = "okay";
};
&pcs_mdio14 {
status = "okay";
};
&pcs_mdio16 {
status = "okay";
};
&sfp_xfi1 {
status = "okay";
};
&sfp_xfi2 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
/dts-v1/;
/plugin/;
&dpmac13 {
sfp = <&sfp_xfi1>;
managed = "in-band-status";
};
&dpmac14 {
sfp = <&sfp_xfi2>;
managed = "in-band-status";
};
&pcs_mdio13 {
status = "okay";
};
&pcs_mdio14 {
status = "okay";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sfp_xfi1 {
status = "okay";
};
&sfp_xfi2 {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
#include "fsl-lx2160a.dtsi"
/ {
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&esdhc1 {
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
mmc-hs200-1_8v;
status = "okay";
};
&fspi {
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <10000000>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <10000000>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
};
};
&i2c0 {
scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
status = "okay";
sensor0: temperature-sensor@1f {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1f>;
};
eeprom1: eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
pagesize = <16>;
read-only;
vcc-supply = <&reg_vcc3v3>;
};
rtc: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <12500>;
};
eeprom2: eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
vcc-supply = <&reg_vcc3v3>;
};
};
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
View file @ 5d9331b4
......@@ -732,9 +732,9 @@ tmu: tmu@1f80000 {
fsl,tmu-range = <0x800000e6 0x8001017d>;
fsl,tmu-calibration =
/* Calibration data group 1 */
<0x00000000 0x00000035
<0x00000000 0x00000035>,
/* Calibration data group 2 */
0x00000001 0x00000154>;
<0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
......
arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
View file @ 5d9331b4
......@@ -68,6 +68,7 @@ reg_can1_supply: regulator-can1-supply {
gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can1_supply";
startup-delay-us = <1000>;
};
reg_can2_supply: regulator-can2-supply {
......@@ -77,6 +78,7 @@ reg_can2_supply: regulator-can2-supply {
gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "can2_supply";
startup-delay-us = <1000>;
};
reg_usb_host_vbus: regulator-usb-host-vbus {
......
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
View file @ 5d9331b4
......@@ -24,7 +24,6 @@ edma0: dma-controller@591f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x591f0000 0x190000>;
#dma-cells = <3>;
shared-interrupt;
dma-channels = <24>;
dma-channel-mask = <0x5c0c00>;
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
......@@ -127,7 +126,6 @@ edma1: dma-controller@599f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x599f0000 0xc0000>;
#dma-cells = <3>;
shared-interrupt;
dma-channels = <11>;
dma-channel-mask = <0xc0>;
interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
......
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
View file @ 5d9331b4
......@@ -13,6 +13,13 @@ conn_enet0_root_clk: clock-conn-enet0-root {
clock-frequency = <250000000>;
clock-output-names = "conn_enet0_root_clk";
};
clk_dummy: clock-dummy {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "clk_dummy";
};
};
&conn_subsys {
......@@ -22,7 +29,7 @@ eqos: ethernet@5b050000 {
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "eth_wake_irq", "macirq";
interrupt-names = "macirq", "eth_wake_irq";
clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
<&eqos_lpcg IMX_LPCG_CLK_6>,
<&eqos_lpcg IMX_LPCG_CLK_0>,
......@@ -53,13 +60,6 @@ usbotg2: usb@5b0e0000 {
rx-burst-size-dword = <0x10>;
power-domains = <&pd IMX_SC_R_USB_1>;
status = "disabled";
clk_dummy: clock-dummy {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
clock-output-names = "clk_dummy";
};
};
usbmisc2: usbmisc@5b0e0200 {
......
arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
View file @ 5d9331b4
......@@ -4,6 +4,6 @@
*/
&ddr_pmu0 {
compatible = "fsl,imx8-ddr-pmu";
compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
View file @ 5d9331b4
......@@ -3,6 +3,8 @@
* Copyright 2020 Compass Electronics Group, LLC
*/
#include "imx8mm-overdrive.dtsi"
/ {
aliases {
rtc0 = &rtc;
......
arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
View file @ 5d9331b4
......@@ -104,7 +104,7 @@ boardID: gpio@3a {
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
};
};
......
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
View file @ 5d9331b4
......@@ -367,12 +367,6 @@ ptn5110: tcpc@50 {
interrupts = <11 8>;
status = "okay";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
typec1_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
......@@ -384,6 +378,12 @@ typec1_con: connector {
PDO_VAR(5000, 20000, 3000)>;
op-sink-microwatt = <15000000>;
self-powered;
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
View file @ 5d9331b4
......@@ -220,7 +220,7 @@ i2c-mux@70 {
#address-cells = <1>;
#size-cells = <0>;
i2c3@0 {
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
&gpu_2d {
assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
};
&gpu_3d {
assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
};
&vpu_blk_ctrl {
assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
<&clk IMX8MM_CLK_VPU_G2>,
<&clk IMX8MM_CLK_VPU_H1>,
<&clk IMX8MM_VPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_VPU_PLL_OUT>,
<&clk IMX8MM_SYS_PLL3_OUT>;
assigned-clock-rates = <750000000>,
<700000000>,
<750000000>,
<700000000>;
};
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
View file @ 5d9331b4
......@@ -11,6 +11,7 @@
/ {
model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
View file @ 5d9331b4
......@@ -84,8 +84,15 @@ reg_usb_otg2_vbus: regulator-usb-otg2 {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
<&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
};
&gpio1 {
......@@ -152,23 +159,30 @@ &pcie0 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@1,0 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@2,3 {
pcie@3,0 {
reg = <0x1800 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
eth1: pcie@5,0 {
eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
local-mac-address = [00 00 00 00 00 00];
};
......@@ -312,6 +326,7 @@ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6
>;
};
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
View file @ 5d9331b4
......@@ -179,23 +179,30 @@ &pcie0 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@1,0 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@2,4 {
pcie@4,0 {
reg = <0x2000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
eth1: pcie@6,0 {
eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
local-mac-address = [00 00 00 00 00 00];
};
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
View file @ 5d9331b4
......@@ -635,13 +635,16 @@ &pcie0 {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
eth1: pcie@1,0 {
eth1: ethernet@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
local-mac-address = [00 00 00 00 00 00];
};
......
arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*
* Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
*
* https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
* https://www.toradex.com/products/carrier-board/mallow-carrier-board
*/
#include <dt-bindings/leds/common.h>
/ {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
/* SODIMM 52 - USER_LED_1_RED */
led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 54 - USER_LED_1_GREEN */
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 56 - USER_LED_2_RED */
led-2 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 58 - USER_LED_2_GREEN */
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
};
};
};
/* Verdin SPI_1 */
&ecspi2 {
pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@1 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm_irq>;
interrupt-parent = <&gpio3>;
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <18500000>;
};
};
/* EEPROM on Mallow */
&eeprom_carrier_board {
status = "okay";
};
/* Verdin ETH_1 */
&fec1 {
status = "okay";
};
/* Temperature sensor on Mallow */
&hwmon_temp {
compatible = "ti,tmp1075";
status = "okay";
};
/* Verdin I2C_2_DSI */
&i2c2 {
status = "okay";
};
/* Verdin I2C_4_CSI */
&i2c3 {
status = "okay";
};
/* Verdin I2C_1 */
&i2c4 {
status = "okay";
};
/* Verdin PCIE_1 */
&pcie0 {
status = "okay";
};
&pcie_phy {
status = "okay";
};
/* Verdin PWM_3_DSI */
&pwm1 {
status = "okay";
};
/* Verdin PWM_1 */
&pwm2 {
status = "okay";
};
/* Verdin PWM_2 */
&pwm3 {
status = "okay";
};
/* Verdin UART_3 */
&uart1 {
status = "okay";
};
/* Verdin UART_1 */
&uart2 {
status = "okay";
};
/* Verdin UART_2 */
&uart3 {
status = "okay";
};
/* Verdin USB_1 */
&usbotg1 {
status = "okay";
};
/* Verdin USB_2 */
&usbotg2 {
status = "okay";
};
/* Verdin SD_1 */
&usdhc2 {
status = "okay";
};
&iomuxc {
pinctrl_leds: ledsgrp {
fsl,pins =
<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x106>, /* SODIMM 52 */
<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x106>, /* SODIMM 54 */
<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x106>, /* SODIMM 56 */
<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x106>; /* SODIMM 58 */
};
pinctrl_tpm_cs: tpmcsgrp {
fsl,pins =
<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x146>; /* SODIMM 64 */
};
pinctrl_tpm_irq: tpmirqgrp {
fsl,pins =
<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x141>; /* SODIMM 66 */
};
};
arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*/
/dts-v1/;
#include "imx8mm-verdin.dtsi"
#include "imx8mm-verdin-nonwifi.dtsi"
#include "imx8mm-verdin-mallow.dtsi"
/ {
model = "Toradex Verdin iMX8M Mini on Mallow";
compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
"toradex,verdin-imx8mm-nonwifi",
"toradex,verdin-imx8mm",
"fsl,imx8mm";
};
arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*/
/dts-v1/;
#include "imx8mm-verdin.dtsi"
#include "imx8mm-verdin-wifi.dtsi"
#include "imx8mm-verdin-mallow.dtsi"
/ {
model = "Toradex Verdin iMX8M Mini WB on Mallow";
compatible = "toradex,verdin-imx8mm-wifi-mallow",
"toradex,verdin-imx8mm-wifi",
"toradex,verdin-imx8mm",
"fsl,imx8mm";
};
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View file @ 5d9331b4
......@@ -636,6 +636,8 @@ snvs_lpgpr: snvs-lpgpr {
clk: clock-controller@30380000 {
compatible = "fsl,imx8mm-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
......@@ -647,7 +649,6 @@ clk: clock-controller@30380000 {
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_ARM_PLL_OUT>,
......@@ -657,7 +658,6 @@ clk: clock-controller@30380000 {
<400000000>,
<400000000>,
<750000000>,
<594000000>,
<393216000>;
};
......@@ -1133,7 +1133,7 @@ lcdif: lcdif@32e00000 {
assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
<&clk IMX8MM_SYS_PLL2_1000M>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <594000000>, <500000000>, <200000000>;
assigned-clock-rates = <24000000>, <500000000>, <200000000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
status = "disabled";
......@@ -1151,12 +1151,8 @@ mipi_dsi: dsi@32e10000 {
clocks = <&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>;
clock-names = "bus_clk", "sclk_mipi";
assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
<&clk IMX8MM_CLK_DSI_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
<&clk IMX8MM_CLK_24M>;
assigned-clock-rates = <266000000>, <24000000>;
samsung,pll-clock-frequency = <24000000>;
assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
status = "disabled";
......@@ -1408,7 +1404,7 @@ gpu_3d: gpu@38000000 {
assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
assigned-clock-rates = <0>, <800000000>;
power-domains = <&pgc_gpu>;
};
......@@ -1423,7 +1419,7 @@ gpu_2d: gpu@38008000 {
assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
<&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
assigned-clock-rates = <0>, <1000000000>;
assigned-clock-rates = <0>, <800000000>;
power-domains = <&pgc_gpu>;
};
......
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
View file @ 5d9331b4
......@@ -3,6 +3,8 @@
* Copyright 2020 Compass Electronics Group, LLC
*/
#include "imx8mn-overdrive.dtsi"
/ {
aliases {
rtc0 = &rtc;
......
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
View file @ 5d9331b4
......@@ -7,6 +7,7 @@
/dts-v1/;
#include "imx8mn.dtsi"
#include "imx8mn-bsh-smm-s2-display.dtsi"
/ {
chosen {
......
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 BSH
*/
/ {
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 700000 0>; /* 700000 ns = 1337Hz */
brightness-levels = <0 100>;
num-interpolated-steps = <100>;
default-brightness-level = <50>;
status = "okay";
};
reg_3v3_dvdd: regulator-3v3-O3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvdd>;
regulator-name = "3v3-dvdd-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
reg_v3v3_avdd: regulator-3v3-O2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_avdd>;
regulator-name = "3v3-avdd-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bl>;
status = "okay";
};
&lcdif {
assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
assigned-clock-rates = <594000000>;
status = "okay";
};
&pgc_dispmix {
assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
assigned-clock-rates = <500000000>, <200000000>;
};
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;
samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <12000000>;
status = "okay";
panel@0 {
compatible = "sharp,ls068b3sx02", "syna,r63353";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_panel>;
reg = <0>;
backlight = <&backlight>;
dvdd-supply = <&reg_3v3_dvdd>;
avdd-supply = <&reg_v3v3_avdd>;
reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&mipi_dsi_out>;
};
};
};
ports {
port@1 {
reg = <1>;
mipi_dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&gpu {
status = "okay";
};
&iomuxc {
pinctrl_avdd: avddgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x16 /* VDD 3V3_VO2 */
>;
};
/* This is for both PWM and voltage regulators for display */
pinctrl_bl: blgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x16
>;
};
pinctrl_dvdd: dvddgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 /* VDD 3V3_VO3 */
>;
};
pinctrl_panel: panelgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x16 /* panel reset */
>;
};
};
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 DimOnOff
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
#include "imx8mn-var-som-symphony.dts"
/ {
model = "DimOnOff Gateway EVK board";
compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
"fsl,imx8mn";
/*
* U30 FPF2193 regulator.
* Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
*/
reg_disp_3v3: regulator-disp-3v3 {
compatible = "regulator-fixed";
regulator-name = "Display 3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
key-enter {
label = "enter";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_ENTER>;
wakeup-source;
};
};
/* Bourns PEC12R rotary encoder, 24 steps. */
rotary: rotary-encoder {
compatible = "rotary-encoder";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rotary>;
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
linux,axis = <0>; /* REL_X */
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
};
};
/* Disable Asynchronous Sample Rate Converter (audio) */
&easrc {
status = "disabled";
};
&ecspi1 {
/* Resistive touch controller */
/delete-node/ touchscreen@0;
};
&gpu {
status = "disabled";
};
&i2c2 {
adc@48 {
compatible = "ti,ads7924";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc>;
vref-supply = <&reg_disp_3v3>;
reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0>;
label = "Pot0";
};
channel@1 {
reg = <1>;
label = "Pot1";
};
channel@2 {
reg = <2>;
label = "Pot2";
};
channel@3 {
reg = <3>;
label = "Pot3";
};
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
reset-source; /* For watchdog. */
};
rtc@53 {
compatible = "nxp,pcf2131";
reg = <0x53>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
reset-source; /* For watchdog. */
interrupt-parent = <&gpio5>;
interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
};
};
&i2c3 {
touchscreen@38 {
status = "disabled";
};
codec@1a {
status = "disabled";
};
/* DS1337 RTC module */
rtc@68 {
status = "disabled";
};
};
&sai5 {
status = "disabled";
};
&iomuxc {
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xc6
>;
};
pinctrl_rotary: rotarygrp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x00000156
MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000156
>;
};
pinctrl_adc: adcgrp {
fsl,pins = <
MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00000156
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x00000156
MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x00000156
>;
};
};
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
View file @ 5d9331b4
......@@ -221,12 +221,6 @@ ptn5110: tcpc@50 {
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
status = "okay";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
typec1_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
......@@ -238,6 +232,12 @@ typec1_con: connector {
PDO_VAR(5000, 20000, 3000)>;
op-sink-microwatt = <15000000>;
self-powered;
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
&gpu {
assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
<&clk IMX8MN_CLK_GPU_SHADER>,
<&clk IMX8MN_CLK_GPU_AXI>,
<&clk IMX8MN_CLK_GPU_AHB>,
<&clk IMX8MN_GPU_PLL>;
assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
<&clk IMX8MN_GPU_PLL_OUT>,
<&clk IMX8MN_SYS_PLL1_800M>,
<&clk IMX8MN_SYS_PLL1_800M>;
assigned-clock-rates = <600000000>,
<600000000>,
<800000000>,
<400000000>,
<1200000000>;
};
arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 DimOnOff
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
#include "imx8mn-var-som.dtsi"
/ {
model = "RVE gateway";
compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
crystal_duart_24m: crystal-duart-24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
key-enter {
label = "enter";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_ENTER>;
};
key-exit {
label = "exit";
gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_ESC>;
};
};
lcd {
compatible = "hit,hd44780";
display-height-chars = <2>;
display-width-chars = <20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
data-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>,
<&gpio1 6 GPIO_ACTIVE_HIGH>,
<&gpio1 14 GPIO_ACTIVE_HIGH>,
<&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio5 24 GPIO_ACTIVE_HIGH>,
<&gpio5 2 GPIO_ACTIVE_HIGH>,
<&gpio1 12 GPIO_ACTIVE_HIGH>,
<&gpio5 25 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
/* Bourns PEC12R rotary encoder, 24 steps. */
rotary: rotary-encoder {
compatible = "rotary-encoder";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rotary>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>, /* A */
<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
linux,axis = <0>; /* REL_X */
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
};
};
&ecspi1 {
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
duart1: serial@0 {
compatible = "nxp,sc16is752";
reg = <0>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
spi-max-frequency = <4000000>;
clocks = <&crystal_duart_24m>;
interrupt-parent = <&gpio3>;
interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
"RADIO4", "RADIO_RESET", "TP12", "TP11";
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
};
/delete-node/ touchscreen@0;
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
/delete-property/ dmas;
/delete-property/ dma-names;
status = "okay";
duart2: serial@0 {
compatible = "nxp,sc16is752";
reg = <0>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
spi-max-frequency = <4000000>;
clocks = <&crystal_duart_24m>;
interrupt-parent = <&gpio3>;
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
"GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
"GPIO_EXT0", "TP13";
linux,rs485-enabled-at-boot-time;
rs485-rts-active-low;
};
};
/* Configure PWM pins in GPIO mode: */
&gpio5 {
gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
};
&gpu {
status = "disabled";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
/* Carrier board EEPROM */
eeprom_cb: eeprom@56 {
compatible = "atmel,24c04";
reg = <0x56>;
pagesize = <16>;
vcc-supply = <&reg_3p3v>;
};
lm75: sensor@48 {
compatible = "st,stlm75";
reg = <0x48>;
vs-supply = <&reg_3p3v>;
};
mcp7940: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
};
&i2c3 {
codec@1a {
status = "disabled";
};
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
pcf8574_1: gpio@38 {
compatible = "nxp,pcf8574";
reg = <0x38>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
"TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
"LED_B_COMM4";
};
pcf8574_2: gpio@39 {
compatible = "nxp,pcf8574";
reg = <0x39>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
"LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
"TP16", "TP17";
};
};
/* Bluetooth */
&uart2 {
status = "disabled";
};
&usbotg1 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
/* SD interface on expansion connector. */
&usdhc2 {
vmmc-supply = <&reg_3p3v>;
cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13
MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13
MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13
MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x13 /* SS0 */
MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x13 /* SC16 IRQ */
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x13
MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x13
MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x13
MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x13 /* SS0 */
MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x13 /* SC16 IRQ */
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0xc6 /* Enter */
MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xc6 /* Exit */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
>;
};
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x00000156 /* D0 */
MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x00000156 /* D1 */
MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00000156 /* D2 */
MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x00000156 /* D3 */
MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x00000156 /* D4 */
MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00000156 /* D5 */
MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00000156 /* D6 */
MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x00000156 /* D7 */
MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x00000156 /* E */
MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x00000156 /* RS */
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x00000156 /* R/W */
>;
};
pinctrl_rotary: rotarygrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x00000156 /* A */
MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x00000156 /* B */
>;
};
/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41
>;
};
};
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
View file @ 5d9331b4
......@@ -11,6 +11,7 @@
/ {
model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
......
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
View file @ 5d9331b4
......@@ -57,6 +57,15 @@ led {
linux,default-trigger = "heartbeat";
};
};
/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
reg_per_3v3: regulator-peripheral-3v3 {
compatible = "regulator-fixed";
regulator-name = "per_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&ethphy {
......@@ -79,6 +88,7 @@ pca9534: gpio@20 {
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
#gpio-cells = <2>;
wakeup-source;
vcc-supply = <&reg_per_3v3>;
/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
usb3-sata-sel-hog {
......@@ -118,9 +128,14 @@ extcon_usbotg1: typec@3d {
pinctrl-0 = <&pinctrl_ptn5150>;
status = "okay";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
View file @ 5d9331b4
......@@ -31,6 +31,14 @@ reg_eth_phy: regulator-eth-phy {
gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_3v3_fixed: regulator-3v3-fixed {
compatible = "regulator-fixed";
regulator-name = "fixed_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&A53_0 {
......@@ -234,6 +242,7 @@ eeprom_som: eeprom@52 {
compatible = "atmel,24c04";
reg = <0x52>;
pagesize = <16>;
vcc-supply = <&reg_3v3_fixed>;
};
};
......
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View file @ 5d9331b4
......@@ -637,6 +637,8 @@ snvs_pwrkey: snvs-powerkey {
clk: clock-controller@30380000 {
compatible = "fsl,imx8mn-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
......
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
View file @ 5d9331b4
......@@ -94,6 +94,17 @@ button-3 {
};
};
bridge-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7535_out>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -153,6 +164,21 @@ reg_usb1_host_vbus: regulator-usb1-vbus {
enable-active-high;
};
sound-adv7535 {
compatible = "simple-audio-card";
simple-audio-card,name = "sound-adv7535";
simple-audio-card,format = "i2s";
simple-audio-card,cpu {
sound-dai = <&sai5>;
system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&adv_bridge>;
};
};
sound-dmic {
compatible = "simple-audio-card";
simple-audio-card,name = "sound-pdm";
......@@ -274,6 +300,35 @@ pca6416_3: gpio@20 {
#interrupt-cells = <2>;
};
adv_bridge: hdmi@3d {
compatible = "adi,adv7535";
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
adi,dsi-lanes = <4>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7535_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
adv7535_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
pcieclk: clock-generator@68 {
compatible = "renesas,9fgv0241";
reg = <0x68>;
......@@ -398,6 +453,10 @@ hd3ss3220_out_ep: endpoint {
};
};
&lcdif1 {
status = "okay";
};
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
......@@ -407,6 +466,21 @@ &micfil {
status = "okay";
};
&mipi_dsi {
samsung,esc-clock-frequency = <10000000>;
status = "okay";
ports {
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7535_in>;
};
};
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
......@@ -433,6 +507,16 @@ &sai3 {
status = "okay";
};
&sai5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai5>;
assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
assigned-clock-rates = <12288000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
......@@ -612,6 +696,14 @@ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
>;
};
pinctrl_sai5: sai5grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0xd6
MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0xd6
MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0xd6
>;
};
pinctrl_tpm: tpmgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */
......
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
View file @ 5d9331b4
......@@ -75,7 +75,7 @@ &A53_3 {
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-connection-type = "rgmii-id";
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
status = "okay";
......
arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
View file @ 5d9331b4
......@@ -63,6 +63,50 @@ regulator-som-vdd3v3 {
regulator-always-on;
};
reg_csi1_1v8: regulator-csi1-vdd1v8 {
compatible = "regulator-fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "CSI1_VDD1V8";
gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_baseboard_vdd3v3>;
};
reg_csi1_3v3: regulator-csi1-vdd3v3 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "CSI1_VDD3V3";
gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_vdd5v0>;
};
reg_csi2_1v8: regulator-csi2-vdd1v8 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "CSI2_VDD1V8";
gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_baseboard_vdd3v3>;
};
reg_csi2_3v3: regulator-csi2-vdd3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "CSI2_VDD3V3";
gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_vdd5v0>;
};
regulator-vbus-usb20 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
......@@ -413,6 +457,18 @@ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
>;
};
pinctrl_reg_csi2_1v8: regcsi21v8grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x19
>;
};
pinctrl_reg_csi2_3v3: regcsi23v3grp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f
......
arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
View file @ 5d9331b4
......@@ -6,6 +6,8 @@
#include "imx8mp.dtsi"
#include <dt-bindings/leds/common.h>
/ {
model = "Polyhex i.MX8MPlus Debix SOM A";
compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
......@@ -20,6 +22,20 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_led>;
led-0 {
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
};
};
};
&A53_0 {
......@@ -203,6 +219,12 @@ &wdog1 {
};
&iomuxc {
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
......
arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
View file @ 5d9331b4
......@@ -175,10 +175,14 @@ typec@3d {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
port {
ptn5150_out_ep: endpoint {
remote-endpoint = <&dwc3_0_ep>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
port {
ptn5150_out_ep: endpoint {
remote-endpoint = <&dwc3_0_ep>;
};
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
View file @ 5d9331b4
......@@ -420,6 +420,18 @@ eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */
reg = <0x53>;
};
eeprom0wl: eeprom@58 {
compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x50 */
pagesize = <32>;
reg = <0x58>;
};
eeprom1wl: eeprom@5b {
compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x53 */
pagesize = <32>;
reg = <0x5b>;
};
ioexp: gpio@74 {
compatible = "nxp,pca9539";
reg = <0x74>;
......
arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
View file @ 5d9331b4
......@@ -57,8 +57,8 @@ sgtl5000: audio-codec@a {
clocks = <&clk IMX8MP_CLK_CLKOUT1>;
#sound-dai-cells = <0>;
VDDA-supply = <&reg_vcc_3v3_audio>;
VDDD-supply = <&reg_vcc_1v8_audio>;
VDDA-supply = <&reg_vcc_3v3_audio>;
VDDD-supply = <&reg_vcc_1v8_audio>;
VDDIO-supply = <&reg_vcc_1v8_audio>;
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi 0 → 100644
View file @ 5d9331b4
This diff is collapsed.
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "imx8mp-skov-reva.dtsi"
/ {
model = "SKOV IMX8MP CPU revB - HDMI";
compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
};
&iomuxc {
pinctrl_hdmi: hdmigrp {
fsl,pins = <
MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3
MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "imx8mp-skov-reva.dtsi"
/ {
model = "SKOV IMX8MP CPU revB - LT6";
compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
touchscreen {
compatible = "resistive-adc-touch";
io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
io-channel-names = "y", "z1", "z2", "x";
touchscreen-min-pressure = <65000>;
touchscreen-inverted-y;
touchscreen-swapped-x-y;
touchscreen-x-plate-ohms = <300>;
};
};
&reg_tft_vcom {
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
voltage-table = <3600000 26>;
status = "okay";
};
&pwm4 {
status = "okay";
};
&backlight {
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
adc_ts: adc@0 {
compatible = "ti,tsc2046e-adc";
reg = <0>;
pinctrl-0 = <&pinctrl_touch>;
pinctrl-names ="default";
spi-max-frequency = <1000000>;
interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
#io-channel-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
channel@1 {
reg = <1>;
settling-time-us = <700>;
oversampling-ratio = <5>;
};
channel@3 {
reg = <3>;
settling-time-us = <700>;
oversampling-ratio = <5>;
};
channel@4 {
reg = <4>;
settling-time-us = <700>;
oversampling-ratio = <5>;
};
channel@5 {
reg = <5>;
settling-time-us = <700>;
oversampling-ratio = <5>;
};
};
};
&pwm1 {
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
>;
};
pinctrl_touch: touchgrp {
fsl,pins = <
/* external pull up */
MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "imx8mp-skov-reva.dtsi"
/ {
model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
panel {
compatible = "multi-inno,mi1010ait-1cp";
backlight = <&backlight>;
power-supply = <&reg_tft_vcom>;
port {
in_lvds0: endpoint {
remote-endpoint = <&ldb_lvds_ch0>;
};
};
};
};
&backlight {
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touchscreen>;
interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1280>;
touchscreen-size-y = <800>;
vcc-supply = <&reg_vdd_3v3>;
iovcc-supply = <&reg_vdd_3v3>;
wakeup-source;
};
};
&lcdif2 {
status = "okay";
};
&lvds_bridge {
/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
assigned-clock-rates = <482300000>;
status = "okay";
ports {
port@1 {
ldb_lvds_ch0: endpoint {
remote-endpoint = <&in_lvds0>;
};
};
};
};
&media_blk_ctrl {
/* currently it is not possible to let display clocks confugure
* automatically, so we need to set them manually
*/
assigned-clock-rates = <500000000>, <200000000>, <0>,
/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
<68900000>,
/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
<964600000>;
};
&pwm4 {
status = "okay";
};
&pwm1 {
status = "okay";
};
&reg_tft_vcom {
regulator-min-microvolt = <3160000>;
regulator-max-microvolt = <3160000>;
voltage-table = <3160000 73>;
status = "okay";
};
&iomuxc {
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Alexander Stein
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/clock/imx8mp-clock.h>
&{/} {
compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
};
&backlight_lvds {
status = "okay";
};
&display {
compatible = "auo,g133han01";
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dual-lvds-odd-pixels;
panel_in_lvds0: endpoint {
remote-endpoint = <&ldb_lvds_ch0>;
};
};
port@1 {
reg = <1>;
dual-lvds-even-pixels;
panel_in_lvds1: endpoint {
remote-endpoint = <&ldb_lvds_ch1>;
};
};
};
};
&lcdif2 {
status = "okay";
};
&lvds_bridge {
assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
<&clk IMX8MP_VIDEO_PLL1>;
assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <988400000>;
status = "okay";
ports {
port@1 {
ldb_lvds_ch0: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
};
port@2 {
ldb_lvds_ch1: endpoint {
remote-endpoint = <&panel_in_lvds1>;
};
};
};
};
&pwm2 {
status = "okay";
};
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
View file @ 5d9331b4
......@@ -15,6 +15,7 @@
/ {
model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
chassis-type = "embedded";
chosen {
stdout-path = &uart4;
......@@ -55,6 +56,21 @@ clk_xtal25: clk-xtal25 {
clock-frequency = <25000000>;
};
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
type = "micro";
label = "X29";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon0>;
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
fan0: pwm-fan {
compatible = "pwm-fan";
pinctrl-names = "default";
......@@ -602,7 +618,6 @@ &usb3_0 {
&usb3_1 {
fsl,disable-port-power-control;
fsl,permanently-attached;
dr_mode = "host";
status = "okay";
};
......@@ -626,13 +641,10 @@ &usb_dwc3_0 {
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
type = "micro";
label = "X29";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon0>;
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
View file @ 5d9331b4
......@@ -8,6 +8,21 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "Type-C";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -132,13 +147,10 @@ &usb_dwc3_0 {
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "Type-C";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
View file @ 5d9331b4
......@@ -8,6 +8,21 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -83,8 +98,15 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
<&gpio1 10 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};
};
&gpio4 {
......@@ -175,13 +197,10 @@ &usb_dwc3_0 {
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......@@ -285,6 +304,7 @@ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
View file @ 5d9331b4
......@@ -8,6 +8,21 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -201,13 +216,10 @@ &usb_dwc3_0 {
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
View file @ 5d9331b4
......@@ -35,6 +35,21 @@ memory@40000000 {
reg = <0x0 0x40000000 0 0x80000000>;
};
connector {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
compatible = "gpio-usb-b-connector", "usb-b-connector";
type = "micro";
label = "Type-C";
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
......@@ -182,8 +197,6 @@ &ecspi1 {
tpm@0 {
compatible = "tcg,tpm_tis-spi";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x0>;
spi-max-frequency = <36000000>;
};
......@@ -694,13 +707,10 @@ &usb_dwc3_0 {
role-switch-default-mode = "peripheral";
status = "okay";
connector {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
compatible = "gpio-usb-b-connector", "usb-b-connector";
type = "micro";
label = "Type-C";
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*
* Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
*
* https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
* https://www.toradex.com/products/carrier-board/mallow-carrier-board
*/
#include <dt-bindings/leds/common.h>
/ {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
/* SODIMM 52 - USER_LED_1_RED */
led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 54 - USER_LED_1_GREEN */
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 56 - USER_LED_2_RED */
led-2 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 58 - USER_LED_2_GREEN */
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
};
};
};
&backlight {
power-supply = <&reg_3p3v>;
};
/* Verdin SPI_1 */
&ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@1 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm_irq>;
interrupt-parent = <&gpio3>;
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <18500000>;
};
};
/* EEPROM on Mallow */
&eeprom_carrier_board {
status = "okay";
};
/* Verdin ETH_1 */
&eqos {
status = "okay";
};
/* Verdin CAN_1 */
&flexcan1 {
status = "okay";
};
/* Verdin CAN_2 */
&flexcan2 {
status = "okay";
};
/* Temperature sensor on Mallow */
&hwmon_temp {
compatible = "ti,tmp1075";
status = "okay";
};
/* Verdin I2C_2_DSI */
&i2c2 {
status = "okay";
};
/* Verdin I2C_4_CSI */
&i2c3 {
status = "okay";
};
/* Verdin I2C_1 */
&i2c4 {
status = "okay";
};
/* Verdin PCIE_1 */
&pcie {
status = "okay";
};
&pcie_phy {
status = "okay";
};
/* Verdin PWM_1 */
&pwm1 {
status = "okay";
};
/* Verdin PWM_2 */
&pwm2 {
status = "okay";
};
/* Verdin PWM_3_DSI */
&pwm3 {
status = "okay";
};
&reg_usdhc2_vmmc {
vin-supply = <&reg_3p3v>;
};
/* Verdin UART_1 */
&uart1 {
status = "okay";
};
/* Verdin UART_2 */
&uart2 {
status = "okay";
};
/* Verdin UART_3 */
&uart3 {
status = "okay";
};
/* Verdin USB_1 */
&usb3_0 {
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
/* Verdin USB_2 */
&usb3_1 {
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
/* Verdin SD_1 */
&usdhc2 {
status = "okay";
};
&iomuxc {
pinctrl_leds: ledsgrp {
fsl,pins =
<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x106>, /* SODIMM 52 */
<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x106>, /* SODIMM 54 */
<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x106>, /* SODIMM 56 */
<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x106>; /* SODIMM 58 */
};
pinctrl_tpm_cs: tpmcsgrp {
fsl,pins =
<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */
};
pinctrl_tpm_irq: tpmirqgrp {
fsl,pins =
<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x16>; /* SODIMM 66 */
};
};
arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*/
/dts-v1/;
#include "imx8mp-verdin.dtsi"
#include "imx8mp-verdin-nonwifi.dtsi"
#include "imx8mp-verdin-mallow.dtsi"
/ {
model = "Toradex Verdin iMX8M Plus on Mallow Board";
compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
"toradex,verdin-imx8mp-nonwifi",
"toradex,verdin-imx8mp",
"fsl,imx8mp";
};
arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2023 Toradex
*/
/dts-v1/;
#include "imx8mp-verdin.dtsi"
#include "imx8mp-verdin-wifi.dtsi"
#include "imx8mp-verdin-mallow.dtsi"
/ {
model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
compatible = "toradex,verdin-imx8mp-wifi-mallow",
"toradex,verdin-imx8mp-wifi",
"toradex,verdin-imx8mp",
"fsl,imx8mp";
};
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
View file @ 5d9331b4
......@@ -45,6 +45,23 @@ backlight_mezzanine: backlight-mezzanine {
status = "disabled";
};
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
label = "Type-C";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_1_id>;
self-powered;
type = "micro";
vbus-supply = <&reg_usb1_vbus>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
......@@ -835,15 +852,10 @@ &usb_dwc3_0 {
srp-disable;
usb-role-switch;
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
label = "Type-C";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_1_id>;
self-powered;
type = "micro";
vbus-supply = <&reg_usb1_vbus>;
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
......
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View file @ 5d9331b4
......@@ -264,6 +264,7 @@ reserved-memory {
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
status = "disabled";
};
};
......@@ -726,6 +727,8 @@ snvs_lpgpr: snvs-lpgpr {
clk: clock-controller@30380000 {
compatible = "fsl,imx8mp-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
......@@ -793,8 +796,8 @@ pgc_audio: power-domain@5 {
<&clk IMX8MP_CLK_AUDIO_AXI>;
assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
<&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-rates = <400000000>,
<600000000>;
};
......@@ -887,6 +890,15 @@ pgc_mlmix: power-domain@24 {
clocks = <&clk IMX8MP_CLK_ML_AXI>,
<&clk IMX8MP_CLK_ML_AHB>,
<&clk IMX8MP_CLK_NPU_ROOT>;
assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
<&clk IMX8MP_CLK_ML_AXI>,
<&clk IMX8MP_CLK_ML_AHB>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_SYS_PLL1_800M>;
assigned-clock-rates = <800000000>,
<800000000>,
<300000000>;
};
};
};
......@@ -2012,6 +2024,18 @@ vpumix_blk_ctrl: blk-ctrl@38330000 {
interconnect-names = "g1", "g2", "vc8000e";
};
npu: npu@38500000 {
compatible = "vivante,gc";
reg = <0x38500000 0x200000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
<&clk IMX8MP_CLK_NPU_ROOT>,
<&clk IMX8MP_CLK_ML_AXI>,
<&clk IMX8MP_CLK_ML_AHB>;
clock-names = "core", "shader", "bus", "reg";
power-domains = <&pgc_mlmix>;
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
......
arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
View file @ 5d9331b4
......@@ -39,7 +39,7 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
fan: gpio-fan {
compatible = "gpio-fan";
gpio-fan,speed-map = <0 0 8600 1>;
gpio-fan,speed-map = <0 0>, <8600 1>;
gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
#cooling-cells = <2>;
pinctrl-names = "default";
......
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
View file @ 5d9331b4
......@@ -11,6 +11,7 @@
/ {
model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
chassis-type = "embedded";
aliases {
eeprom0 = &eeprom3;
......
arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
View file @ 5d9331b4
......@@ -117,21 +117,25 @@ &flexcan3 {
&lpuart0 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
dma-names = "rx","tx";
};
&lpuart1 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
dma-names = "rx","tx";
};
&lpuart2 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
dma-names = "rx","tx";
};
&lpuart3 {
compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
dma-names = "rx","tx";
};
&i2c0 {
......
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
View file @ 5d9331b4
......@@ -31,7 +31,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
};
gpio-sbu-mux {
compatible = "gpio-sbu-mux";
compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_typec_mux>;
select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
......@@ -50,6 +50,10 @@ &dsp {
status = "okay";
};
&dsp_reserved {
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
......@@ -152,12 +156,6 @@ ptn5110: tcpc@50 {
interrupt-parent = <&lsio_gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
port {
typec_dr_sw: endpoint {
remote-endpoint = <&usb3_drd_sw>;
};
};
usb_con1: connector {
compatible = "usb-c-connector";
label = "USB-C";
......@@ -169,8 +167,17 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
typec_dr_sw: endpoint {
remote-endpoint = <&usb3_drd_sw>;
};
};
port@1 {
reg = <1>;
typec_con_ss: endpoint {
remote-endpoint = <&usb3_data_ss>;
};
......
arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi 0 → 100644
View file @ 5d9331b4
// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
/*
* Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Alexander Stein
*/
&vpu_core0 {
reg = <0x2d040000 0x10000>;
};
&vpu_core1 {
reg = <0x2d050000 0x10000>;
};
/delete-node/ &mu2_m0;
/delete-node/ &vpu_core2;
arch/arm64/boot/dts/freescale/imx8qxp.dtsi
View file @ 5d9331b4
......@@ -48,7 +48,6 @@ aliases {
serial3 = &lpuart3;
vpu-core0 = &vpu_core0;
vpu-core1 = &vpu_core1;
vpu-core2 = &vpu_core2;
};
cpus {
......@@ -184,6 +183,7 @@ decoder_rpc: decoder-rpc@92000000 {
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
status = "disabled";
};
encoder_rpc: encoder-rpc@94400000 {
......@@ -317,6 +317,7 @@ map0 {
};
#include "imx8qxp-ss-img.dtsi"
#include "imx8qxp-ss-vpu.dtsi"
#include "imx8qxp-ss-adma.dtsi"
#include "imx8qxp-ss-conn.dtsi"
#include "imx8qxp-ss-lsio.dtsi"
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
View file @ 5d9331b4
......@@ -76,6 +76,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
off-on-delay-us = <12000>;
enable-active-high;
};
};
......@@ -237,18 +238,19 @@ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
......@@ -265,14 +267,15 @@ MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
......
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts 0 → 100644
View file @ 5d9331b4
This diff is collapsed.
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
View file @ 5d9331b4
......@@ -18,6 +18,7 @@ /{
model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
compatible = "tq,imx93-tqma9352-mba93xxla",
"tq,imx93-tqma9352", "fsl,imx93";
chassis-type = "embedded";
chosen {
stdout-path = &lpuart1;
......
arch/arm64/boot/dts/freescale/imx93.dtsi
View file @ 5d9331b4
......@@ -171,6 +171,18 @@ cm33: remoteproc-cm33 {
status = "disabled";
};
mqs1: mqs1 {
compatible = "fsl,imx93-mqs";
gpr = <&aonmix_ns_gpr>;
status = "disabled";
};
mqs2: mqs2 {
compatible = "fsl,imx93-mqs";
gpr = <&wakeupmix_gpr>;
status = "disabled";
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -282,6 +294,19 @@ tpm2: pwm@44320000 {
status = "disabled";
};
i3c1: i3c-master@44330000 {
compatible = "silvaco,i3c-master-v1";
reg = <0x44330000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <0>;
clocks = <&clk IMX93_CLK_BUS_AON>,
<&clk IMX93_CLK_I3C1_GATE>,
<&clk IMX93_CLK_I3C1_SLOW>;
clock-names = "pclk", "fast_clk", "slow_clk";
status = "disabled";
};
lpi2c1: i2c@44340000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x44340000 0x10000>;
......@@ -367,6 +392,19 @@ flexcan1: can@443a0000 {
status = "disabled";
};
sai1: sai@443b0000 {
compatible = "fsl,imx93-sai";
reg = <0x443b0000 0x10000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
iomuxc: pinctrl@443c0000 {
compatible = "fsl,imx93-iomuxc";
reg = <0x443c0000 0x10000>;
......@@ -395,6 +433,8 @@ clk: clock-controller@44450000 {
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
clock-names = "osc_32k", "osc_24m", "clk_ext1";
assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
assigned-clock-rates = <393216000>;
status = "okay";
};
......@@ -422,9 +462,10 @@ mediamix: power-domain@44462400 {
};
};
anatop: anatop@44480000 {
compatible = "fsl,imx93-anatop", "syscon";
clock-controller@44480000 {
compatible = "fsl,imx93-anatop";
reg = <0x44480000 0x2000>;
#clock-cells = <1>;
};
tmu: tmu@44482000 {
......@@ -447,6 +488,21 @@ tmu: tmu@44482000 {
#thermal-sensor-cells = <1>;
};
micfil: micfil@44520000 {
compatible = "fsl,imx93-micfil";
reg = <0x44520000 0x10000>;
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_PDM_IPG>,
<&clk IMX93_CLK_PDM_GATE>,
<&clk IMX93_CLK_AUDIO_PLL>;
clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
dmas = <&edma1 29 0 5>;
dma-names = "rx";
status = "disabled";
};
adc1: adc@44530000 {
compatible = "nxp,imx93-adc";
......@@ -473,7 +529,6 @@ edma2: dma-controller@42000000 {
compatible = "fsl,imx93-edma4";
reg = <0x42000000 0x210000>;
#dma-cells = <3>;
shared-interrupt;
dma-channels = <64>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
......@@ -616,6 +671,19 @@ tpm6: pwm@42510000 {
status = "disabled";
};
i3c2: i3c-master@42520000 {
compatible = "silvaco,i3c-master-v1";
reg = <0x42520000 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <0>;
clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
<&clk IMX93_CLK_I3C2_GATE>,
<&clk IMX93_CLK_I3C2_SLOW>;
clock-names = "pclk", "fast_clk", "slow_clk";
status = "disabled";
};
lpi2c3: i2c@42530000 {
compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x42530000 0x10000>;
......@@ -738,6 +806,51 @@ flexspi1: spi@425e0000 {
status = "disabled";
};
sai2: sai@42650000 {
compatible = "fsl,imx93-sai";
reg = <0x42650000 0x10000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai3: sai@42660000 {
compatible = "fsl,imx93-sai";
reg = <0x42660000 0x10000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
xcvr: xcvr@42680000 {
compatible = "fsl,imx93-xcvr";
reg = <0x42680000 0x800>,
<0x42680800 0x400>,
<0x42680c00 0x080>,
<0x42680e00 0x080>;
reg-names = "ram", "regs", "rxfifo", "txfifo";
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
<&clk IMX93_CLK_SPDIF_GATE>,
<&clk IMX93_CLK_DUMMY>,
<&clk IMX93_CLK_AUD_XCVR_GATE>;
clock-names = "ipg", "phy", "spba", "pll_ipg";
dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
lpuart7: serial@42690000 {
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42690000 0x1000>;
......@@ -755,7 +868,7 @@ lpuart8: serial@426a0000 {
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART8_GATE>;
clock-names = "ipg";
dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -874,7 +987,7 @@ usdhc1: mmc@42850000 {
<&clk IMX93_CLK_USDHC1_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <8>;
fsl,tuning-start-tap = <20>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
......@@ -888,7 +1001,7 @@ usdhc2: mmc@42860000 {
<&clk IMX93_CLK_USDHC2_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
......@@ -951,7 +1064,7 @@ usdhc3: mmc@428b0000 {
<&clk IMX93_CLK_USDHC3_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-start-tap = <1>;
fsl,tuning-step = <2>;
status = "disabled";
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7