Commit 85b064b6 authored by Richard Purdie's avatar Richard Purdie

leds: Remove uneeded leds-cm-x270 driver

The cm-x270 board uses leds-gpio so remove the now unneeded driver.
Acked-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
parent dd8e5a20
......@@ -113,12 +113,6 @@ config LEDS_GPIO
outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines.
config LEDS_CM_X270
tristate "LED Support for the CM-X270 LEDs"
depends on LEDS_CLASS && MACH_ARMCORE
help
This option enables support for the CM-X270 LEDs.
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
......
......@@ -17,7 +17,6 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
......
/*
* drivers/leds/leds-cm-x270.c
*
* Copyright 2007 CompuLab Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Based on leds-corgi.c
* Author: Richard Purdie <rpurdie@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#define GPIO_RED_LED (93)
#define GPIO_GREEN_LED (94)
static void cmx270_red_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
else
GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
}
static void cmx270_green_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
else
GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
}
static struct led_classdev cmx270_red_led = {
.name = "cm-x270:red",
.default_trigger = "nand-disk",
.brightness_set = cmx270_red_set,
};
static struct led_classdev cmx270_green_led = {
.name = "cm-x270:green",
.default_trigger = "heartbeat",
.brightness_set = cmx270_green_set,
};
#ifdef CONFIG_PM
static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
{
led_classdev_suspend(&cmx270_red_led);
led_classdev_suspend(&cmx270_green_led);
return 0;
}
static int cmx270led_resume(struct platform_device *dev)
{
led_classdev_resume(&cmx270_red_led);
led_classdev_resume(&cmx270_green_led);
return 0;
}
#endif
static int cmx270led_probe(struct platform_device *pdev)
{
int ret;
ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
if (ret < 0)
return ret;
ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
if (ret < 0)
led_classdev_unregister(&cmx270_red_led);
return ret;
}
static int cmx270led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&cmx270_red_led);
led_classdev_unregister(&cmx270_green_led);
return 0;
}
static struct platform_driver cmx270led_driver = {
.probe = cmx270led_probe,
.remove = cmx270led_remove,
#ifdef CONFIG_PM
.suspend = cmx270led_suspend,
.resume = cmx270led_resume,
#endif
.driver = {
.name = "cm-x270-led",
.owner = THIS_MODULE,
},
};
static int __init cmx270led_init(void)
{
return platform_driver_register(&cmx270led_driver);
}
static void __exit cmx270led_exit(void)
{
platform_driver_unregister(&cmx270led_driver);
}
module_init(cmx270led_init);
module_exit(cmx270led_exit);
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
MODULE_DESCRIPTION("CM-x270 LED driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:cm-x270-led");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment