Commit 85b064b6 authored by Richard Purdie's avatar Richard Purdie

leds: Remove uneeded leds-cm-x270 driver

The cm-x270 board uses leds-gpio so remove the now unneeded driver.
Acked-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
parent dd8e5a20
...@@ -113,12 +113,6 @@ config LEDS_GPIO ...@@ -113,12 +113,6 @@ config LEDS_GPIO
outputs. To be useful the particular board must have LEDs outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines. and they must be connected to the GPIO lines.
config LEDS_CM_X270
tristate "LED Support for the CM-X270 LEDs"
depends on LEDS_CLASS && MACH_ARMCORE
help
This option enables support for the CM-X270 LEDs.
config LEDS_CLEVO_MAIL config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
......
...@@ -17,7 +17,6 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o ...@@ -17,7 +17,6 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
......
/*
* drivers/leds/leds-cm-x270.c
*
* Copyright 2007 CompuLab Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Based on leds-corgi.c
* Author: Richard Purdie <rpurdie@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#define GPIO_RED_LED (93)
#define GPIO_GREEN_LED (94)
static void cmx270_red_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
else
GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
}
static void cmx270_green_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value)
GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
else
GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
}
static struct led_classdev cmx270_red_led = {
.name = "cm-x270:red",
.default_trigger = "nand-disk",
.brightness_set = cmx270_red_set,
};
static struct led_classdev cmx270_green_led = {
.name = "cm-x270:green",
.default_trigger = "heartbeat",
.brightness_set = cmx270_green_set,
};
#ifdef CONFIG_PM
static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
{
led_classdev_suspend(&cmx270_red_led);
led_classdev_suspend(&cmx270_green_led);
return 0;
}
static int cmx270led_resume(struct platform_device *dev)
{
led_classdev_resume(&cmx270_red_led);
led_classdev_resume(&cmx270_green_led);
return 0;
}
#endif
static int cmx270led_probe(struct platform_device *pdev)
{
int ret;
ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
if (ret < 0)
return ret;
ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
if (ret < 0)
led_classdev_unregister(&cmx270_red_led);
return ret;
}
static int cmx270led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&cmx270_red_led);
led_classdev_unregister(&cmx270_green_led);
return 0;
}
static struct platform_driver cmx270led_driver = {
.probe = cmx270led_probe,
.remove = cmx270led_remove,
#ifdef CONFIG_PM
.suspend = cmx270led_suspend,
.resume = cmx270led_resume,
#endif
.driver = {
.name = "cm-x270-led",
.owner = THIS_MODULE,
},
};
static int __init cmx270led_init(void)
{
return platform_driver_register(&cmx270led_driver);
}
static void __exit cmx270led_exit(void)
{
platform_driver_unregister(&cmx270led_driver);
}
module_init(cmx270led_init);
module_exit(cmx270led_exit);
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
MODULE_DESCRIPTION("CM-x270 LED driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:cm-x270-led");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment