Commit 8c781bf7 authored by Albert Lee's avatar Albert Lee Committed by Jeff Garzik

libata: pata_pdc2027x PLL input clock fix

Recently the PLL input clock of pata_pdc2027x is sometimes detected
higer than expected (e.g. 20.027 MHz compared to 16.714 MHz).
It seems sometimes the mdelay() function is not as precise as it
used to be. Per Alan's advice, HT or power management might affect
the precision of mdelay().

This patch calls gettimeofday() to mesure the time elapsed and
calculate the PLL input clock accordingly.
Signed-off-by: default avatarAlbert Lee <albertcc@tw.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent abcdceb9
......@@ -689,10 +689,12 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
long pll_clock;
struct timeval start_time, end_time;
long pll_clock, usec_elapsed;
/* Read current counter value */
start_count = pdc_read_counter(host);
do_gettimeofday(&start_time);
/* Start the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
......@@ -705,6 +707,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
/* Read the counter values again */
end_count = pdc_read_counter(host);
do_gettimeofday(&end_time);
/* Stop the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
......@@ -713,7 +716,11 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
readl(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
pll_clock = (start_count - end_count) * 10;
usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
(end_time.tv_usec - start_time.tv_usec);
pll_clock = (start_count - end_count) / 100 *
(100000000 / usec_elapsed);
PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment