Merge tag 'omap-for-v4.3/dt-pt1' of...

Merge tag 'omap-for-v4.3/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap dts changes for v4.3, part 1" from Tony Lindgren:

Omap dts changes for v4.3 merge window. There are also related
changes for reemoteproc platform_data and audio options for
omap2plus_defconfig to keep audio working when changing boards
to use SIMPLE_CARD. The summary of changes is:

- A large set of audio related changes for SIMPLE_CARD from
  Peter Ujfalusi <peter.ujfalusi@ti.com> for am335x and am437x

- Pinctrl dts defines for dra7 virtual mode to configure timings

- Change to use cpsw slave0 for dra7 Ethernet

- Remove unconfigured and wrong l3-mux entry for dm816x

- Add support for Gumstix Palo35 and TobiDuo boards, and  Overo
  PoP NAND and McBSP2

- Start using new HDMI binding for tilcdc

- Start using new sDMA crossbar for dra7

- Start using rproc for am335x and am437x M3 coprocessor

* tag 'omap-for-v4.3/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (32 commits)
  ARM: dts: am335x-evm: Switch using simple-audio-card for audio support
  ARM: dts: am335x-evm: Add sleep pin settings for mcasp1
  ARM: dts: am335x-evm: Rename pinctrl section for McASP1
  ARM: dts: am335x-evm: Fix mcasp1 node's indentation
  ARM: dts: am335x-evmsk: Switch using simple-audio-card for audio support
  ARM: dts: am335x-evmsk: Add sleep pin settings for mcasp1
  ARM: dts: am335x-evmsk: Fix mcasp1 node's indentation
  ARM: dts: am437x-gp-evm: Enable analog audio via simple-card
  ARM: dts: am437x-gp-evm: McASP1 node for audio support
  ARM: dts: am437x-gp-evm: Add node for tlv320aic3106 audio codec
  ARM: dts: am437x-gp-evm: Rename fixed regulator vmmcsd_fixed to evm_v3_3d
  ARM: dts: am437x-gp-evm: Add gpio-hog for configuring the display/audio mux
  ARM: dts: am43xx-epos-evm: Enable analog audio via simple-card
  ARM: dts: am43xx-epos-evm: Add node for tlv320aic3111 audio codec
  ARM: dts: am43xx-epos-evm: McASP1 node for audio support
  ARM: dts: am43xx-epos-evm: Add regulator for VBAT and DCDC4 of tps65218
  ARM: dts: am43xx-epos-evm: Add gpio-hog for configuring the display/audio mux
  ARM: dts: am437x-sk-evm: Switch using simple-audio-card for audio support
  ARM: dts: am437x-sk-evm: Add sleep pin settings for mcasp1
  ARM: omap2plus_defconfig: Enable audio related config options
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -409,15 +409,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-overo-alto35.dtb \
 	omap3-overo-chestnut43.dtb \
 	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
 	omap3-overo-palo43.dtb \
 	omap3-overo-storm-alto35.dtb \
 	omap3-overo-storm-chestnut43.dtb \
 	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
 	omap3-overo-storm-palo43.dtb \
 	omap3-overo-storm-summit.dtb \
 	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
 	omap3-pandora-600mhz.dtb \
 	omap3-pandora-1ghz.dtb \
 	omap3-sbc-t3517.dtb \

arch/arm/boot/dts/am335x-boneblack.dts

@@ -68,16 +68,26 @@ nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
 
 &lcdc {
 	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
 };
 
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
+&i2c0 {
+	tda19988 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
+
+		port {
+			hdmi_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
 	};
 };
 

arch/arm/boot/dts/am335x-evm.dts

@@ -136,16 +136,29 @@ display-timings {
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
 	};
 };
 
@@ -342,7 +355,7 @@ lcd_pins_s0: lcd_pins_s0 {
 		>;
 	};
 
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
+	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@@ -351,6 +364,15 @@ am335x_evm_audio_pins: am335x_evm_audio_pins {
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
 			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
@@ -460,6 +482,7 @@ tmp275: tmp275@48 {
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -575,19 +598,21 @@ partition@9 {
 #include "tps65910.dtsi"
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tps {

arch/arm/boot/dts/am335x-evmsk.dts

@@ -141,14 +141,26 @@ backlight {
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	panel {
@@ -396,6 +408,15 @@ mcasp1_pins: mcasp1_pins {
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
 			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
@@ -462,6 +483,7 @@ lis331dlh: lis331dlh@18 {
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -661,19 +683,21 @@ wlcore: wlcore@2 {
 };
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tscadc {

arch/arm/boot/dts/am33xx.dtsi

@@ -103,6 +103,15 @@ l4_wkup: l4_wkup@44c00000 {
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x280000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+
 			prcm: prcm@200000 {
 				compatible = "ti,am3-prcm";
 				reg = <0x200000 0x4000>;
@@ -762,14 +771,6 @@ ocmcram: ocmcram@40300000 {
 			reg = <0x40300000 0x10000>; /* 64k */
 		};
 
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
 		elm: elm@48080000 {
 			compatible = "ti,am3352-elm";
 			reg = <0x48080000 0x2000>;

arch/arm/boot/dts/am4372.dtsi

@@ -83,6 +83,15 @@ l4_wkup: l4_wkup@44c00000 {
 			#size-cells = <1>;
 			ranges = <0 0x44c00000 0x287000>;
 
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am4372-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+
 			prcm: prcm@1f0000 {
 				compatible = "ti,am4-prcm";
 				reg = <0x1f0000 0x11000>;

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -24,9 +24,9 @@ aliases {
 		serial3 = &uart3;
 	};
 
-	vmmcsd_fixed: fixedregulator-sd {
+	evm_v3_3d: fixedregulator-v3_3d {
 		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
+		regulator-name = "evm_v3_3d";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
@@ -83,17 +83,6 @@ lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -124,6 +113,32 @@ refclk: oscillator {
 		clock-frequency = <12000000>;
 	};
 
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-GP-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -270,7 +285,7 @@ dss_pins: dss_pins {
 		>;
 	};
 
-	lcd_pins: lcd_pins {
+	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
 			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -409,6 +424,24 @@ uart3_pins: uart3_pins {
 			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 		>;
 	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_sleep_pins: mcasp1_sleep_pins {
+		pinctrl-single,pins = <
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
 };
 
 &i2c0 {
@@ -521,6 +554,19 @@ ov2659_1: endpoint {
 			};
 		};
 	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+	};
 };
 
 &epwmss0 {
@@ -558,13 +604,27 @@ &gpio4 {
 };
 
 &gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 	ti,no-reset-on-init;
+
+	p8 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&evm_v3_3d>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
@@ -790,3 +850,21 @@ vpfe1_ep: endpoint {
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -32,14 +32,29 @@ backlight {
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-SK-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	matrix_keypad: matrix_keypad@0 {
@@ -364,6 +379,15 @@ mcasp1_pins: mcasp1_pins {
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
 			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
@@ -480,6 +504,7 @@ edt-ft5306@38 {
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -640,8 +665,10 @@ &elm {
 };
 
 &mcasp1 {
-	pinctrl-names = "default";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
 	status = "okay";
 

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -14,6 +14,7 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
@@ -31,21 +32,18 @@ vmmcsd_fixed: fixedregulator-sd {
 		enable-active-high;
 	};
 
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
 	lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -108,6 +106,38 @@ backlight {
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
 };
 
 &am43xx_pinmux {
@@ -278,7 +308,7 @@ dss_pins: dss_pins {
 			>;
 		};
 
-		lcd_pins: lcd_pins {
+		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
 				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -320,6 +350,24 @@ vpfe1_pins_sleep: vpfe1_pins_sleep {
 				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
 };
 
 &mmc1 {
@@ -399,6 +447,15 @@ dcdc3: regulator-dcdc3 {
 			regulator-always-on;
 		};
 
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
 		dcdc5: regulator-dcdc5 {
 			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
@@ -441,6 +498,23 @@ pixcir_ts@5c {
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
 };
 
 &i2c2 {
@@ -458,7 +532,21 @@ &gpio1 {
 };
 
 &gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
+
+	p1 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &gpio3 {
@@ -686,3 +774,21 @@ vpfe1_ep: endpoint {
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};

arch/arm/boot/dts/dm816x.dtsi

@@ -58,7 +58,7 @@ mpu {
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;

arch/arm/boot/dts/dra7.dtsi

@@ -308,6 +308,15 @@ sdma: dma-controller@4a056000 {
 			dma-requests = <127>;
 		};
 
+		sdma_xbar: dma-router@4a002b78 {
+			compatible = "ti,dra7-dma-crossbar";
+			reg = <0x4a002b78 0xfc>;
+			#dma-cells = <1>;
+			dma-requests = <205>;
+			ti,dma-safe-map = <0>;
+			dma-masters = <&sdma>;
+		};
+
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
@@ -403,7 +412,7 @@ uart1: serial@4806a000 {
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
+			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
 			dma-names = "tx", "rx";
 		};
 
@@ -414,7 +423,7 @@ uart2: serial@4806c000 {
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
+			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
 			dma-names = "tx", "rx";
 		};
 
@@ -425,7 +434,7 @@ uart3: serial@48020000 {
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
+			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
 			dma-names = "tx", "rx";
 		};
 
@@ -436,7 +445,7 @@ uart4: serial@4806e000 {
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
                         status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
+			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
 			dma-names = "tx", "rx";
 		};
 
@@ -447,7 +456,7 @@ uart5: serial@48066000 {
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
+			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
 			dma-names = "tx", "rx";
 		};
 
@@ -458,7 +467,7 @@ uart6: serial@48068000 {
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
+			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
 			dma-names = "tx", "rx";
 		};
 
@@ -867,7 +876,7 @@ mmc1: mmc@4809c000 {
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
+			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 			pbias-supply = <&pbias_mmc_reg>;
@@ -879,7 +888,7 @@ mmc2: mmc@480b4000 {
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
+			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -890,7 +899,7 @@ mmc3: mmc@480ad000 {
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
+			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -901,7 +910,7 @@ mmc4: mmc@480d1000 {
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
+			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 		};
@@ -1046,14 +1055,14 @@ mcspi1: spi@48098000 {
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
 			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
+			dmas = <&sdma_xbar 35>,
+			       <&sdma_xbar 36>,
+			       <&sdma_xbar 37>,
+			       <&sdma_xbar 38>,
+			       <&sdma_xbar 39>,
+			       <&sdma_xbar 40>,
+			       <&sdma_xbar 41>,
+			       <&sdma_xbar 42>;
 			dma-names = "tx0", "rx0", "tx1", "rx1",
 				    "tx2", "rx2", "tx3", "rx3";
 			status = "disabled";
@@ -1067,10 +1076,10 @@ mcspi2: spi@4809a000 {
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
+			dmas = <&sdma_xbar 43>,
+			       <&sdma_xbar 44>,
+			       <&sdma_xbar 45>,
+			       <&sdma_xbar 46>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -1083,7 +1092,7 @@ mcspi3: spi@480b8000 {
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
 			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
+			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};
@@ -1096,7 +1105,7 @@ mcspi4: spi@480ba000 {
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
 			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
+			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
 			dma-names = "tx0", "rx0";
 			status = "disabled";
 		};

arch/arm/boot/dts/dra72-evm.dts

@@ -343,6 +343,12 @@ pcf_gpio_21: gpio@21 {
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		cpsw_sel_s0 {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
 	};
 };
 
@@ -571,9 +577,10 @@ &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };
@@ -582,7 +589,6 @@ &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	active_slave = <1>;
 };
 
 &dcan1 {

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -218,3 +218,58 @@ &uart2 {
 	pinctrl-0 = <&uart2_pins>;
 };
 
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x80000>; /* 512KiB */
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1C0000>; /* 1792KiB */
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>; /* 256KiB */
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x800000>; /* 8192KiB */
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0xA80000 0>;
+			/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+		};
+	};
+};

arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi

@@ -62,6 +62,7 @@ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
 			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
 			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
 			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs1.mcspi1_cs1 */
 		>;
 	};
 
@@ -123,7 +124,7 @@ lcd0: display@0 {
 		label = "lcd";
 
 		reg = <1>;					/* CS1 */
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <500000>;
 		spi-cpol;
 		spi-cpha;
 

arch/arm/boot/dts/omap3-overo-palo35-common.dtsi

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/boot/dts/omap3-overo-palo35.dts

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};

arch/arm/boot/dts/omap3-overo-storm-palo35.dts

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};

arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};

arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	smsc1: ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+
+		reg = <4 0 0xff>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 65 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};

arch/arm/boot/dts/omap3-overo-tobiduo.dts

+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};

arch/arm/boot/dts/omap3-overo.dtsi

@@ -32,7 +32,3 @@ OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
 		>;
 	};
 };
-
-&mcbsp2 {
-	status = "okay";
-};

arch/arm/configs/omap2plus_defconfig

@@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_EDMA_SOC=m
 CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_OMAP_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB_KBD=m

arch/arm/mach-omap2/pdata-quirks.c

@@ -17,6 +17,7 @@
 
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -278,6 +279,14 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 };
 #endif
 
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static struct wkup_m3_platform_data wkup_m3_data = {
+	.reset_name = "wkup_m3",
+	.assert_reset = omap_device_assert_hardreset,
+	.deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP5
 static void __init omap5_uevm_legacy_init(void)
 {
@@ -340,6 +349,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
 		       &am35xx_emac_pdata),
 #endif
+#ifdef CONFIG_SOC_AM33XX
+	OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
+#endif
 #ifdef CONFIG_ARCH_OMAP4
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
@@ -353,6 +366,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_SOC_AM43XX
 	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",

include/dt-bindings/pinctrl/dra.h

@@ -30,6 +30,26 @@
 #define MUX_MODE14	0xe
 #define MUX_MODE15	0xf
 
+/* Certain pins need virtual mode, but note: they may glitch */
+#define MUX_VIRTUAL_MODE0	(MODE_SELECT | (0x0 << 4))
+#define MUX_VIRTUAL_MODE1	(MODE_SELECT | (0x1 << 4))
+#define MUX_VIRTUAL_MODE2	(MODE_SELECT | (0x2 << 4))
+#define MUX_VIRTUAL_MODE3	(MODE_SELECT | (0x3 << 4))
+#define MUX_VIRTUAL_MODE4	(MODE_SELECT | (0x4 << 4))
+#define MUX_VIRTUAL_MODE5	(MODE_SELECT | (0x5 << 4))
+#define MUX_VIRTUAL_MODE6	(MODE_SELECT | (0x6 << 4))
+#define MUX_VIRTUAL_MODE7	(MODE_SELECT | (0x7 << 4))
+#define MUX_VIRTUAL_MODE8	(MODE_SELECT | (0x8 << 4))
+#define MUX_VIRTUAL_MODE9	(MODE_SELECT | (0x9 << 4))
+#define MUX_VIRTUAL_MODE10	(MODE_SELECT | (0xa << 4))
+#define MUX_VIRTUAL_MODE11	(MODE_SELECT | (0xb << 4))
+#define MUX_VIRTUAL_MODE12	(MODE_SELECT | (0xc << 4))
+#define MUX_VIRTUAL_MODE13	(MODE_SELECT | (0xd << 4))
+#define MUX_VIRTUAL_MODE14	(MODE_SELECT | (0xe << 4))
+#define MUX_VIRTUAL_MODE15	(MODE_SELECT | (0xf << 4))
+
+#define MODE_SELECT		(1 << 8)
+
 #define PULL_ENA		(0 << 16)
 #define PULL_DIS		(1 << 16)
 #define PULL_UP			(1 << 17)