Merge remote-tracking branches 'asoc/topic/rt286', 'asoc/topic/rt5616' and...

Merge remote-tracking branches 'asoc/topic/rt286', 'asoc/topic/rt5616' and 'asoc/topic/rt5677' into asoc-next

Documentation/devicetree/bindings/sound/rt5616.txt

+RT5616 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5616".
+
+- reg : The I2C address of the device.
+
+Pins on the device (for linking into audio routes) for RT5616:
+
+  * IN1P
+  * IN2P
+  * IN2N
+  * LOUTL
+  * LOUTR
+  * HPOL
+  * HPOR
+
+Example:
+
+codec: rt5616@1b {
+	compatible = "realtek,rt5616";
+	reg = <0x1b>;
+};

Documentation/devicetree/bindings/sound/rt5659.txt

+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2N pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+  3: using GPIO9 pin as dmic1 data pin
+  4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2P pin as dmic2 data pin
+  2: using GPIO6 pin as dmic2 data pin
+  3: using GPIO10 pin as dmic2 data pin
+  4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD3 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * SPOL
+  * SPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+  * SPDIF
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5659";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/sound/rt5677.txt

@@ -18,7 +18,7 @@ Required properties:
 Optional properties:
 
 - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
-- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
 
 - realtek,in1-differential
 - realtek,in2-differential

include/sound/rt5659.h

+/*
+ * linux/sound/rt5659.h -- Platform data for RT5659
+ *
+ * Copyright 2013 Realtek Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_RT5659_H
+#define __LINUX_SND_RT5659_H
+
+enum rt5659_dmic1_data_pin {
+	RT5659_DMIC1_NULL,
+	RT5659_DMIC1_DATA_IN2N,
+	RT5659_DMIC1_DATA_GPIO5,
+	RT5659_DMIC1_DATA_GPIO9,
+	RT5659_DMIC1_DATA_GPIO11,
+};
+
+enum rt5659_dmic2_data_pin {
+	RT5659_DMIC2_NULL,
+	RT5659_DMIC2_DATA_IN2P,
+	RT5659_DMIC2_DATA_GPIO6,
+	RT5659_DMIC2_DATA_GPIO10,
+	RT5659_DMIC2_DATA_GPIO12,
+};
+
+enum rt5659_jd_src {
+	RT5659_JD_NULL,
+	RT5659_JD3,
+};
+
+struct rt5659_platform_data {
+	bool in1_diff;
+	bool in3_diff;
+	bool in4_diff;
+
+	int ldo1_en; /* GPIO for LDO1_EN */
+	int reset; /* GPIO for RESET */
+
+	enum rt5659_dmic1_data_pin dmic1_data_pin;
+	enum rt5659_dmic2_data_pin dmic2_data_pin;
+	enum rt5659_jd_src jd_src;
+};
+
+#endif
+

sound/soc/codecs/Kconfig

@@ -95,10 +95,12 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_PCM512x_SPI if SPI_MASTER
 	select SND_SOC_RT286 if I2C
 	select SND_SOC_RT298 if I2C
+	select SND_SOC_RT5616 if I2C
 	select SND_SOC_RT5631 if I2C
 	select SND_SOC_RT5640 if I2C
 	select SND_SOC_RT5645 if I2C
 	select SND_SOC_RT5651 if I2C
+	select SND_SOC_RT5659 if I2C
 	select SND_SOC_RT5670 if I2C
 	select SND_SOC_RT5677 if I2C && SPI_MASTER
 	select SND_SOC_SGTL5000 if I2C
@@ -563,14 +565,18 @@ config SND_SOC_PCM512x_SPI
 
 config SND_SOC_RL6231
 	tristate
+	default y if SND_SOC_RT5616=y
 	default y if SND_SOC_RT5640=y
 	default y if SND_SOC_RT5645=y
 	default y if SND_SOC_RT5651=y
+	default y if SND_SOC_RT5659=y
 	default y if SND_SOC_RT5670=y
 	default y if SND_SOC_RT5677=y
+	default m if SND_SOC_RT5616=m
 	default m if SND_SOC_RT5640=m
 	default m if SND_SOC_RT5645=m
 	default m if SND_SOC_RT5651=m
+	default m if SND_SOC_RT5659=m
 	default m if SND_SOC_RT5670=m
 	default m if SND_SOC_RT5677=m
 
@@ -589,6 +595,9 @@ config SND_SOC_RT298
 	tristate
 	depends on I2C
 
+config SND_SOC_RT5616
+	tristate
+
 config SND_SOC_RT5631
 	tristate "Realtek ALC5631/RT5631 CODEC"
 	depends on I2C
@@ -602,6 +611,9 @@ config SND_SOC_RT5645
 config SND_SOC_RT5651
 	tristate
 
+config SND_SOC_RT5659
+	tristate
+
 config SND_SOC_RT5670
 	tristate
 

sound/soc/codecs/Makefile

@@ -92,10 +92,12 @@ snd-soc-rl6231-objs := rl6231.o
 snd-soc-rl6347a-objs := rl6347a.o
 snd-soc-rt286-objs := rt286.o
 snd-soc-rt298-objs := rt298.o
+snd-soc-rt5616-objs := rt5616.o
 snd-soc-rt5631-objs := rt5631.o
 snd-soc-rt5640-objs := rt5640.o
 snd-soc-rt5645-objs := rt5645.o
 snd-soc-rt5651-objs := rt5651.o
+snd-soc-rt5659-objs := rt5659.o
 snd-soc-rt5670-objs := rt5670.o
 snd-soc-rt5677-objs := rt5677.o
 snd-soc-rt5677-spi-objs := rt5677-spi.o
@@ -294,10 +296,12 @@ obj-$(CONFIG_SND_SOC_RL6231)	+= snd-soc-rl6231.o
 obj-$(CONFIG_SND_SOC_RL6347A)	+= snd-soc-rl6347a.o
 obj-$(CONFIG_SND_SOC_RT286)	+= snd-soc-rt286.o
 obj-$(CONFIG_SND_SOC_RT298)	+= snd-soc-rt298.o
+obj-$(CONFIG_SND_SOC_RT5616)	+= snd-soc-rt5616.o
 obj-$(CONFIG_SND_SOC_RT5631)	+= snd-soc-rt5631.o
 obj-$(CONFIG_SND_SOC_RT5640)	+= snd-soc-rt5640.o
 obj-$(CONFIG_SND_SOC_RT5645)	+= snd-soc-rt5645.o
 obj-$(CONFIG_SND_SOC_RT5651)	+= snd-soc-rt5651.o
+obj-$(CONFIG_SND_SOC_RT5659)	+= snd-soc-rt5659.o
 obj-$(CONFIG_SND_SOC_RT5670)	+= snd-soc-rt5670.o
 obj-$(CONFIG_SND_SOC_RT5677)	+= snd-soc-rt5677.o
 obj-$(CONFIG_SND_SOC_RT5677_SPI)	+= snd-soc-rt5677-spi.o

sound/soc/codecs/rt286.c

@@ -1114,6 +1114,12 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "Wilson Beach SDS")
 		}
 	},
+	{
+		.ident = "Intel Skylake RVP",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Skylake Client platform")
+		}
+	},
 	{ }
 };
 

sound/soc/codecs/rt298.c

@@ -854,8 +854,6 @@ static int rt298_set_dai_sysclk(struct snd_soc_dai *dai,
 	} else {
 		snd_soc_update_bits(codec,
 			RT298_I2S_CTRL2, 0x0100, 0x0100);
-		snd_soc_update_bits(codec,
-			RT298_PLL_CTRL, 0x4, 0x4);
 		snd_soc_update_bits(codec,
 			RT298_PLL_CTRL1, 0x20, 0x0);
 	}

sound/soc/codecs/rt5677.c

@@ -4788,7 +4788,7 @@ static int rt5677_remove(struct snd_soc_codec *codec)
 
 	regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
 	gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
-	gpiod_set_value_cansleep(rt5677->reset_pin, 0);
+	gpiod_set_value_cansleep(rt5677->reset_pin, 1);
 
 	return 0;
 }
@@ -4803,7 +4803,7 @@ static int rt5677_suspend(struct snd_soc_codec *codec)
 		regcache_mark_dirty(rt5677->regmap);
 
 		gpiod_set_value_cansleep(rt5677->pow_ldo2, 0);
-		gpiod_set_value_cansleep(rt5677->reset_pin, 0);
+		gpiod_set_value_cansleep(rt5677->reset_pin, 1);
 	}
 
 	return 0;
@@ -4814,8 +4814,11 @@ static int rt5677_resume(struct snd_soc_codec *codec)
 	struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
 
 	if (!rt5677->dsp_vad_en) {
+		rt5677->pll_src = 0;
+		rt5677->pll_in = 0;
+		rt5677->pll_out = 0;
 		gpiod_set_value_cansleep(rt5677->pow_ldo2, 1);
-		gpiod_set_value_cansleep(rt5677->reset_pin, 1);
+		gpiod_set_value_cansleep(rt5677->reset_pin, 0);
 		if (rt5677->pow_ldo2 || rt5677->reset_pin)
 			msleep(10);
 
@@ -5160,7 +5163,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 	rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev,
-			"realtek,reset", GPIOD_OUT_HIGH);
+			"realtek,reset", GPIOD_OUT_LOW);
 	if (IS_ERR(rt5677->reset_pin)) {
 		ret = PTR_ERR(rt5677->reset_pin);
 		dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret);