Commit dcb326a2 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge kroah.com:/home/greg/linux/BK/bleed-2.6

into kroah.com:/home/greg/linux/BK/i2c-2.6
parents be758139 37d85919
This diff is collapsed.
......@@ -15,9 +15,6 @@ config I2C
Both I2C and SMBus are supported here. You will need this for
hardware sensors support, and also for Video For Linux support.
Specifically, if you want to use a BT848 based frame grabber/overlay
boards under Linux, say Y here and also to "I2C bit-banging
interfaces", below.
If you want I2C support, you should say Y here and also to the
specific driver for your bus adapter(s) below.
......
......@@ -144,6 +144,17 @@ config I2C_ITE
This support is also available as a module. If so, the module
will be called i2c-ite.
config I2C_IXP42X
tristate "IXP42x GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP425
select I2C_ALGOBIT
help
Say Y here if you have an Intel IXP42x(420,421,422,425) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
will be called i2c-ixp42x.
config I2C_KEYWEST
tristate "Powermac Keywest I2C interface"
depends on I2C && PPC_PMAC
......
......@@ -15,6 +15,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP42X) += i2c-ixp42x.o
obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_PHILIPSPAR) += i2c-philips-par.o
......
......@@ -517,6 +517,7 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_
static void __devexit ali1535_remove(struct pci_dev *dev)
{
i2c_del_adapter(&ali1535_adapter);
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
}
static struct pci_driver ali1535_driver = {
......@@ -534,7 +535,6 @@ static int __init i2c_ali1535_init(void)
static void __exit i2c_ali1535_exit(void)
{
pci_unregister_driver(&ali1535_driver);
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
......
......@@ -608,6 +608,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
static void __devexit i801_remove(struct pci_dev *dev)
{
i2c_del_adapter(&i801_adapter);
release_region(i801_smba, (isich4 ? 16 : 8));
}
static struct pci_driver i801_driver = {
......@@ -625,7 +626,6 @@ static int __init i2c_i801_init(void)
static void __exit i2c_i801_exit(void)
{
pci_unregister_driver(&i801_driver);
release_region(i801_smba, (isich4 ? 16 : 8));
}
MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
......
/*
* drivers/i2c/i2c-adap-ixp42x.c
*
* Intel's IXP42x XScale NPU chipsets (IXP420, 421, 422, 425) do not have
* an on board I2C controller but provide 16 GPIO pins that are often
* used to create an I2C bus. This driver provides an i2c_adapter
* interface that plugs in under algo_bit and drives the GPIO pins
* as instructed by the alogorithm driver.
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (c) 2003-2004 MontaVista Software Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* NOTE: Since different platforms will use different GPIO pins for
* I2C, this driver uses an IXP42x-specific platform_data
* pointer to pass the GPIO numbers to the driver. This
* allows us to support all the different IXP42x platforms
* w/o having to put #ifdefs in this driver.
*
* See arch/arm/mach-ixp42x/ixdp425.c for an example of building a
* device list and filling in the ixp42x_i2c_pins data structure
* that is passed as the platform_data to this driver.
*/
#include <linux/config.h>
#ifdef CONFIG_I2C_DEBUG_BUS
#define DEBUG 1
#endif
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <asm/hardware.h> /* Pick up IXP42x-specific bits */
static inline int ixp42x_scl_pin(void *data)
{
return ((struct ixp42x_i2c_pins*)data)->scl_pin;
}
static inline int ixp42x_sda_pin(void *data)
{
return ((struct ixp42x_i2c_pins*)data)->sda_pin;
}
static void ixp42x_bit_setscl(void *data, int val)
{
gpio_line_set(ixp42x_scl_pin(data), 0);
gpio_line_config(ixp42x_scl_pin(data),
val ? IXP425_GPIO_IN : IXP425_GPIO_OUT );
}
static void ixp42x_bit_setsda(void *data, int val)
{
gpio_line_set(ixp42x_sda_pin(data), 0);
gpio_line_config(ixp42x_sda_pin(data),
val ? IXP425_GPIO_IN : IXP425_GPIO_OUT );
}
static int ixp42x_bit_getscl(void *data)
{
int scl;
gpio_line_config(ixp42x_scl_pin(data), IXP425_GPIO_IN );
gpio_line_get(ixp42x_scl_pin(data), &scl);
return scl;
}
static int ixp42x_bit_getsda(void *data)
{
int sda;
gpio_line_config(ixp42x_sda_pin(data), IXP425_GPIO_IN );
gpio_line_get(ixp42x_sda_pin(data), &sda);
return sda;
}
struct ixp42x_i2c_data {
struct ixp42x_i2c_pins *gpio_pins;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo_data;
};
static int ixp42x_i2c_remove(struct device *dev)
{
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp42x_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev);
dev_set_drvdata(&plat_dev->dev, NULL);
i2c_bit_del_bus(&drv_data->adapter);
kfree(drv_data);
return 0;
}
static int ixp42x_i2c_probe(struct device *dev)
{
int err;
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp42x_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp42x_i2c_data *drv_data =
kmalloc(sizeof(struct ixp42x_i2c_data), GFP_KERNEL);
if(!drv_data)
return -ENOMEM;
memzero(drv_data, sizeof(struct ixp42x_i2c_data));
drv_data->gpio_pins = gpio;
/*
* We could make a lot of these structures static, but
* certain platforms may have multiple GPIO-based I2C
* buses for various device domains, so we need per-device
* algo_data->data.
*/
drv_data->algo_data.data = gpio;
drv_data->algo_data.setsda = ixp42x_bit_setsda;
drv_data->algo_data.setscl = ixp42x_bit_setscl;
drv_data->algo_data.getsda = ixp42x_bit_getsda;
drv_data->algo_data.getscl = ixp42x_bit_getscl;
drv_data->algo_data.udelay = 10;
drv_data->algo_data.mdelay = 10;
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP425,
drv_data->adapter.algo_data = &drv_data->algo_data,
drv_data->adapter.dev.parent = &plat_dev->dev;
gpio_line_config(gpio->scl_pin, IXP425_GPIO_IN);
gpio_line_config(gpio->sda_pin, IXP425_GPIO_IN);
gpio_line_set(gpio->scl_pin, 0);
gpio_line_set(gpio->sda_pin, 0);
if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id);
kfree(drv_data);
return err;
}
dev_set_drvdata(&plat_dev->dev, drv_data);
return 0;
}
static struct device_driver ixp42x_i2c_driver = {
.name = "IXP42X-I2C",
.bus = &platform_bus_type,
.probe = ixp42x_i2c_probe,
.remove = ixp42x_i2c_remove,
};
static int __init ixp42x_i2c_init(void)
{
return driver_register(&ixp42x_i2c_driver);
}
static void __exit ixp42x_i2c_exit(void)
{
driver_unregister(&ixp42x_i2c_driver);
}
module_init(ixp42x_i2c_init);
module_exit(ixp42x_i2c_exit);
MODULE_DESCRIPTION("GPIO-based I2C driver for IXP42x systems");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
......@@ -391,6 +391,7 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_
static void __devexit sis5595_remove(struct pci_dev *dev)
{
i2c_del_adapter(&sis5595_adapter);
release_region(sis5595_base + SMB_INDEX, 2);
}
static struct pci_driver sis5595_driver = {
......@@ -408,7 +409,6 @@ static int __init i2c_sis5595_init(void)
static void __exit i2c_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_driver);
release_region(sis5595_base + SMB_INDEX, 2);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
......
......@@ -171,6 +171,7 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
static struct i2c_adapter voodoo3_i2c_adapter = {
.owner = THIS_MODULE,
.class = I2C_ADAP_CLASS_TV_ANALOG,
.name = "I2C Voodoo3/Banshee adapter",
.algo_data = &voo_i2c_bit_data,
};
......@@ -187,6 +188,7 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = {
static struct i2c_adapter voodoo3_ddc_adapter = {
.owner = THIS_MODULE,
.class = I2C_ADAP_CLASS_DDC,
.name = "DDC Voodoo3/Banshee adapter",
.algo_data = &voo_ddc_bit_data,
};
......
......@@ -102,6 +102,17 @@ config SENSORS_LM78
This driver can also be built as a module. If so, the module
will be called lm78.
config SENSORS_LM80
tristate "National Semiconductor LM80"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM80 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm80.
config SENSORS_LM83
tristate "National Semiconductor LM83"
depends on I2C && EXPERIMENTAL
......
......@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
obj-$(CONFIG_SENSORS_LM78) += lm78.o
obj-$(CONFIG_SENSORS_LM80) += lm80.o
obj-$(CONFIG_SENSORS_LM83) += lm83.o
obj-$(CONFIG_SENSORS_LM85) += lm85.o
obj-$(CONFIG_SENSORS_LM90) += lm90.o
......
......@@ -148,7 +148,7 @@ static int read_only = 0;
/* This is the driver that will be inserted */
static struct i2c_driver adm1021_driver = {
.owner = THIS_MODULE,
.name = "ADM1021-MAX1617",
.name = "adm1021",
.id = I2C_DRIVERID_ADM1021,
.flags = I2C_DF_NOTIFY,
.attach_adapter = adm1021_attach_adapter,
......@@ -206,12 +206,12 @@ set(temp_hyst, ADM1021_REG_THYST_W);
set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp_min1, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input, NULL);
static DEVICE_ATTR(temp_max2, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
static DEVICE_ATTR(temp_min2, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
static DEVICE_ATTR(temp_input2, S_IRUGO, show_remote_temp_input, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static DEVICE_ATTR(die_code, S_IRUGO, show_die_code, NULL);
......@@ -331,12 +331,12 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
adm1021_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_min1);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_min2);
device_create_file(&new_client->dev, &dev_attr_temp_input2);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_alarms);
if (data->type == adm1021)
device_create_file(&new_client->dev, &dev_attr_die_code);
......
......@@ -274,7 +274,7 @@ static ssize_t \
{ \
return show_in(dev, buf, 0x##offset); \
} \
static DEVICE_ATTR(in_input##offset, S_IRUGO, \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
show_in##offset, NULL) \
static ssize_t \
show_in##offset##_min (struct device *dev, char *buf) \
......@@ -296,9 +296,9 @@ static ssize_t set_in##offset##_max (struct device *dev, \
{ \
return set_in_max(dev, buf, count, 0x##offset); \
} \
static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in##offset##_min, set_in##offset##_min) \
static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in##offset##_max, set_in##offset##_max)
sysfs_in(0)
......@@ -310,9 +310,9 @@ sysfs_in(5)
sysfs_in(6)
#define device_create_file_in(client, offset) do { \
device_create_file(&client->dev, &dev_attr_in_input##offset); \
device_create_file(&client->dev, &dev_attr_in_min##offset); \
device_create_file(&client->dev, &dev_attr_in_max##offset); \
device_create_file(&client->dev, &dev_attr_in##offset##_input); \
device_create_file(&client->dev, &dev_attr_in##offset##_min); \
device_create_file(&client->dev, &dev_attr_in##offset##_max); \
} while (0)
/* 3 Fans */
......@@ -412,11 +412,11 @@ static ssize_t set_fan##offset##_div(struct device *dev, const char *buf, \
{ \
return set_fan_div(dev, buf, count, offset - 1); \
} \
static DEVICE_ATTR(fan_input##offset, S_IRUGO, \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
show_fan##offset, NULL) \
static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan##offset##_min, set_fan##offset##_min) \
static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
show_fan##offset##_div, set_fan##offset##_div)
sysfs_fan(1)
......@@ -424,9 +424,9 @@ sysfs_fan(2)
sysfs_fan(3)
#define device_create_file_fan(client, offset) do { \
device_create_file(&client->dev, &dev_attr_fan_input##offset); \
device_create_file(&client->dev, &dev_attr_fan_min##offset); \
device_create_file(&client->dev, &dev_attr_fan_div##offset); \
device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
} while (0)
/* 4 Temp. Sensors */
......@@ -484,7 +484,7 @@ static ssize_t show_temp##num(struct device *dev, char *buf) \
{ \
return show_temp(dev, buf, num-1); \
} \
static DEVICE_ATTR(temp_input##num, S_IRUGO, show_temp##num, NULL) \
static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL) \
static ssize_t show_temp_max##num(struct device *dev, char *buf) \
{ \
return show_temp_max(dev, buf, num-1); \
......@@ -494,7 +494,7 @@ static ssize_t set_temp_max##num(struct device *dev, const char *buf, \
{ \
return set_temp_max(dev, buf, count, num-1); \
} \
static DEVICE_ATTR(temp_max##num, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
show_temp_max##num, set_temp_max##num) \
static ssize_t show_temp_hyst##num(struct device *dev, char *buf) \
{ \
......@@ -505,7 +505,7 @@ static ssize_t set_temp_hyst##num(struct device *dev, const char *buf, \
{ \
return set_temp_hyst(dev, buf, count, num-1); \
} \
static DEVICE_ATTR(temp_hyst##num, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_hyst##num, set_temp_hyst##num)
sysfs_temp(1)
......@@ -515,9 +515,9 @@ sysfs_temp(4)
/* VID */
#define device_create_file_temp(client, num) do { \
device_create_file(&client->dev, &dev_attr_temp_input##num); \
device_create_file(&client->dev, &dev_attr_temp_max##num); \
device_create_file(&client->dev, &dev_attr_temp_hyst##num); \
device_create_file(&client->dev, &dev_attr_temp##num##_input); \
device_create_file(&client->dev, &dev_attr_temp##num##_max); \
device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
} while (0)
static ssize_t show_vid(struct device *dev, char *buf)
......@@ -526,9 +526,9 @@ static ssize_t show_vid(struct device *dev, char *buf)
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(vid, S_IRUGO, show_vid, NULL)
static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid, NULL)
#define device_create_file_vid(client) \
device_create_file(&client->dev, &dev_attr_vid)
device_create_file(&client->dev, &dev_attr_in0_ref)
/* VRM */
static ssize_t show_vrm(struct device *dev, char *buf)
......@@ -597,12 +597,12 @@ static ssize_t set_pwm_enable1(struct device *dev, const char *buf,
return count;
}
static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1)
static DEVICE_ATTR(pwm_enable1, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1)
static DEVICE_ATTR(fan1_pwm_enable, S_IRUGO | S_IWUSR,
show_pwm_enable1, set_pwm_enable1)
#define device_create_file_pwm1(client) do { \
device_create_file(&new_client->dev, &dev_attr_pwm1); \
device_create_file(&new_client->dev, &dev_attr_pwm_enable1); \
device_create_file(&new_client->dev, &dev_attr_fan1_pwm); \
device_create_file(&new_client->dev, &dev_attr_fan1_pwm_enable); \
} while (0)
/* This function is called when:
......
......@@ -26,6 +26,11 @@
* and Philip Edelbrock <phil@netroedge.com>
*/
#include <linux/config.h>
#ifdef CONFIG_I2C_DEBUG_CHIP
#define DEBUG 1
#endif
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
......@@ -160,71 +165,71 @@ static int fscher_id = 0;
* Sysfs stuff
*/
#define sysfs_r(kind, offset, reg) \
static ssize_t show_##kind (struct fscher_data *, char *, int); \
static ssize_t show_##kind##offset (struct device *, char *); \
static ssize_t show_##kind##offset (struct device *dev, char *buf) \
#define sysfs_r(kind, sub, offset, reg) \
static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
static ssize_t show_##kind##offset##sub (struct device *, char *); \
static ssize_t show_##kind##offset##sub (struct device *dev, char *buf) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct fscher_data *data = i2c_get_clientdata(client); \
fscher_update_client(client); \
return show_##kind(data, buf, (offset)); \
return show_##kind##sub(data, buf, (offset)); \
}
#define sysfs_w(kind, offset, reg) \
static ssize_t set_##kind (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
static ssize_t set_##kind##offset (struct device *, const char *, size_t); \
static ssize_t set_##kind##offset (struct device *dev, const char *buf, size_t count) \
#define sysfs_w(kind, sub, offset, reg) \
static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
static ssize_t set_##kind##offset##sub (struct device *, const char *, size_t); \
static ssize_t set_##kind##offset##sub (struct device *dev, const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct fscher_data *data = i2c_get_clientdata(client); \
return set_##kind(client, data, buf, count, (offset), reg); \
return set_##kind##sub(client, data, buf, count, (offset), reg); \
}
#define sysfs_rw_n(kind, offset, reg) \
sysfs_r(kind, offset, reg) \
sysfs_w(kind, offset, reg) \
static DEVICE_ATTR(kind##offset, S_IRUGO | S_IWUSR, show_##kind##offset, set_##kind##offset);
#define sysfs_rw_n(kind, sub, offset, reg) \
sysfs_r(kind, sub, offset, reg) \
sysfs_w(kind, sub, offset, reg) \
static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
#define sysfs_rw(kind, reg) \
sysfs_r(kind, 0, reg) \
sysfs_w(kind, 0, reg) \
static DEVICE_ATTR(kind, S_IRUGO | S_IWUSR, show_##kind##0, set_##kind##0);
#define sysfs_rw(kind, sub, reg) \
sysfs_r(kind, sub, 0, reg) \
sysfs_w(kind, sub, 0, reg) \
static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
#define sysfs_ro_n(kind, offset, reg) \
sysfs_r(kind, offset, reg) \
static DEVICE_ATTR(kind##offset, S_IRUGO, show_##kind##offset, NULL);
#define sysfs_ro_n(kind, sub, offset, reg) \
sysfs_r(kind, sub, offset, reg) \
static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
#define sysfs_ro(kind, reg) \
sysfs_r(kind, 0, reg) \
static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0, NULL);
#define sysfs_ro(kind, sub, reg) \
sysfs_r(kind, sub, 0, reg) \
static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
sysfs_rw_n(pwm , offset, reg_min) \
sysfs_rw_n(fan_status, offset, reg_status) \
sysfs_rw_n(fan_div , offset, reg_ripple) \
sysfs_ro_n(fan_input , offset, reg_act)
sysfs_rw_n(fan, _pwm , offset, reg_min) \
sysfs_rw_n(fan, _status, offset, reg_status) \
sysfs_rw_n(fan, _div , offset, reg_ripple) \
sysfs_ro_n(fan, _input , offset, reg_act)
#define sysfs_temp(offset, reg_status, reg_act) \
sysfs_rw_n(temp_status, offset, reg_status) \
sysfs_ro_n(temp_input , offset, reg_act)
sysfs_rw_n(temp, _status, offset, reg_status) \
sysfs_ro_n(temp, _input , offset, reg_act)
#define sysfs_in(offset, reg_act) \
sysfs_ro_n(in_input, offset, reg_act)
sysfs_ro_n(in, _input, offset, reg_act)
#define sysfs_revision(reg_revision) \
sysfs_ro(revision, reg_revision)
sysfs_ro(revision, , reg_revision)
#define sysfs_alarms(reg_events) \
sysfs_ro(alarms, reg_events)
sysfs_ro(alarms, , reg_events)
#define sysfs_control(reg_control) \
sysfs_rw(control, reg_control)
sysfs_rw(control, , reg_control)
#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
sysfs_rw(watchdog_control, reg_control) \
sysfs_rw(watchdog_status , reg_status) \
sysfs_rw(watchdog_preset , reg_preset)
sysfs_rw(watchdog, _control, reg_control) \
sysfs_rw(watchdog, _status , reg_status) \
sysfs_rw(watchdog, _preset , reg_preset)
sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
......@@ -248,21 +253,21 @@ sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_P
#define device_create_file_fan(client, offset) \
do { \
device_create_file(&client->dev, &dev_attr_fan_status##offset); \
device_create_file(&client->dev, &dev_attr_pwm##offset); \
device_create_file(&client->dev, &dev_attr_fan_div##offset); \
device_create_file(&client->dev, &dev_attr_fan_input##offset); \
device_create_file(&client->dev, &dev_attr_fan##offset##_status); \
device_create_file(&client->dev, &dev_attr_fan##offset##_pwm); \
device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
} while (0)
#define device_create_file_temp(client, offset) \
do { \
device_create_file(&client->dev, &dev_attr_temp_status##offset); \
device_create_file(&client->dev, &dev_attr_temp_input##offset); \
device_create_file(&client->dev, &dev_attr_temp##offset##_status); \
device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
} while (0)
#define device_create_file_in(client, offset) \
do { \
device_create_file(&client->dev, &dev_attr_in_input##offset); \
device_create_file(&client->dev, &dev_attr_in##offset##_input); \
} while (0)
#define device_create_file_revision(client) \
......@@ -484,7 +489,7 @@ static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
}
static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
static ssize_t set_fan_pwm(struct i2c_client *client, struct fscher_data *data,
const char *buf, size_t count, int nr, int reg)
{
data->fan_min[FAN_INDEX_FROM_NUM(nr)] = simple_strtoul(buf, NULL, 10) & 0xff;
......@@ -493,7 +498,7 @@ static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
return count;
}
static ssize_t show_pwm (struct fscher_data *data, char *buf, int nr)
static ssize_t show_fan_pwm (struct fscher_data *data, char *buf, int nr)
{
return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
}
......
......@@ -307,29 +307,29 @@ static ssize_t set_fan_min2(struct device *dev, const char *buf, size_t count)
return count;
}
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp_max1, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
static DEVICE_ATTR(temp_hyst1, S_IWUSR|S_IRUGO,
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
show_temp_hyst1, set_temp_hyst1);
static DEVICE_ATTR(fan_auto1, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
static DEVICE_ATTR(fan_input1, S_IRUGO, show_fan_input1, NULL);
static DEVICE_ATTR(fan_input2, S_IRUGO, show_fan_input2, NULL);
static DEVICE_ATTR(fan_min1, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
static DEVICE_ATTR(fan_min2, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
static DEVICE_ATTR(fan_div1, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
static DEVICE_ATTR(fan_div2, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
static DEVICE_ATTR(in_input0, S_IRUGO, show_in_input0, NULL);
static DEVICE_ATTR(in_input1, S_IRUGO, show_in_input1, NULL);
static DEVICE_ATTR(in_input2, S_IRUGO, show_in_input2, NULL);
static DEVICE_ATTR(in_input3, S_IRUGO, show_in_input3, NULL);
static DEVICE_ATTR(in_min0, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
static DEVICE_ATTR(in_min1, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
static DEVICE_ATTR(in_min2, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
static DEVICE_ATTR(in_min3, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
static DEVICE_ATTR(in_max0, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
static DEVICE_ATTR(in_max1, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
static DEVICE_ATTR(in_max2, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
static DEVICE_ATTR(in_max3, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
show_beep_enable, set_beep_enable);
......@@ -424,28 +424,28 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
gl518_init_client((struct i2c_client *) new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_in_input0);
device_create_file(&new_client->dev, &dev_attr_in_input1);
device_create_file(&new_client->dev, &dev_attr_in_input2);
device_create_file(&new_client->dev, &dev_attr_in_input3);
device_create_file(&new_client->dev, &dev_attr_in_min0);
device_create_file(&new_client->dev, &dev_attr_in_min1);
device_create_file(&new_client->dev, &dev_attr_in_min2);
device_create_file(&new_client->dev, &dev_attr_in_min3);
device_create_file(&new_client->dev, &dev_attr_in_max0);
device_create_file(&new_client->dev, &dev_attr_in_max1);
device_create_file(&new_client->dev, &dev_attr_in_max2);
device_create_file(&new_client->dev, &dev_attr_in_max3);
device_create_file(&new_client->dev, &dev_attr_fan_auto1);
device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_input2);
device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_min2);
device_create_file(&new_client->dev, &dev_attr_fan_div1);
device_create_file(&new_client->dev, &dev_attr_fan_div2);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_fan1_auto);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_beep_enable);
device_create_file(&new_client->dev, &dev_attr_beep_mask);
......
This diff is collapsed.
......@@ -104,9 +104,9 @@ static ssize_t set_##value(struct device *dev, const char *buf, size_t count) \
set(temp_max, LM75_REG_TEMP_OS);
set(temp_hyst, LM75_REG_TEMP_HYST);
static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp_hyst1, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
static int lm75_attach_adapter(struct i2c_adapter *adapter)
{
......@@ -197,9 +197,9 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
lm75_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
return 0;
......
......@@ -289,7 +289,7 @@ static ssize_t \
{ \
return show_in(dev, buf, 0x##offset); \
} \
static DEVICE_ATTR(in_input##offset, S_IRUGO, \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
show_in##offset, NULL) \
static ssize_t \
show_in##offset##_min (struct device *dev, char *buf) \
......@@ -311,9 +311,9 @@ static ssize_t set_in##offset##_max (struct device *dev, \
{ \
return set_in_max(dev, buf, count, 0x##offset); \
} \
static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in##offset##_min, set_in##offset##_min) \
static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in##offset##_max, set_in##offset##_max)
show_in_offset(0);
......@@ -369,10 +369,10 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
return count;
}
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp_max1, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
show_temp_over, set_temp_over)
static DEVICE_ATTR(temp_hyst1, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst)
/* 3 Fans */
......@@ -460,8 +460,8 @@ static ssize_t set_fan_##offset##_min (struct device *dev, \
{ \
return set_fan_min(dev, buf, count, 0x##offset - 1); \
} \
static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_##offset##_min, set_fan_##offset##_min)
static ssize_t set_fan_1_div(struct device *dev, const char *buf,
......@@ -481,11 +481,11 @@ show_fan_offset(2);
show_fan_offset(3);
/* Fan 3 divisor is locked in H/W */
static DEVICE_ATTR(fan_div1, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
show_fan_1_div, set_fan_1_div)
static DEVICE_ATTR(fan_div2, S_IRUGO | S_IWUSR,
static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
show_fan_2_div, set_fan_2_div)
static DEVICE_ATTR(fan_div3, S_IRUGO, show_fan_3_div, NULL)
static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL)
/* VID */
static ssize_t show_vid(struct device *dev, char *buf)
......@@ -495,7 +495,7 @@ static ssize_t show_vid(struct device *dev, char *buf)
lm78_update_client(client);
return sprintf(buf, "%d\n", VID_FROM_REG(data->vid));
}
static DEVICE_ATTR(vid, S_IRUGO, show_vid, NULL);
static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid, NULL);
/* Alarms */
static ssize_t show_alarms(struct device *dev, char *buf)
......@@ -657,41 +657,41 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
lm78_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_in_input0);
device_create_file(&new_client->dev, &dev_attr_in_min0);
device_create_file(&new_client->dev, &dev_attr_in_max0);
device_create_file(&new_client->dev, &dev_attr_in_input1);
device_create_file(&new_client->dev, &dev_attr_in_min1);
device_create_file(&new_client->dev, &dev_attr_in_max1);
device_create_file(&new_client->dev, &dev_attr_in_input2);
device_create_file(&new_client->dev, &dev_attr_in_min2);
device_create_file(&new_client->dev, &dev_attr_in_max2);
device_create_file(&new_client->dev, &dev_attr_in_input3);
device_create_file(&new_client->dev, &dev_attr_in_min3);
device_create_file(&new_client->dev, &dev_attr_in_max3);
device_create_file(&new_client->dev, &dev_attr_in_input4);
device_create_file(&new_client->dev, &dev_attr_in_min4);
device_create_file(&new_client->dev, &dev_attr_in_max4);
device_create_file(&new_client->dev, &dev_attr_in_input5);
device_create_file(&new_client->dev, &dev_attr_in_min5);
device_create_file(&new_client->dev, &dev_attr_in_max5);
device_create_file(&new_client->dev, &dev_attr_in_input6);
device_create_file(&new_client->dev, &dev_attr_in_min6);
device_create_file(&new_client->dev, &dev_attr_in_max6);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_div1);
device_create_file(&new_client->dev, &dev_attr_fan_input2);
device_create_file(&new_client->dev, &dev_attr_fan_min2);
device_create_file(&new_client->dev, &dev_attr_fan_div2);
device_create_file(&new_client->dev, &dev_attr_fan_input3);
device_create_file(&new_client->dev, &dev_attr_fan_min3);
device_create_file(&new_client->dev, &dev_attr_fan_div3);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_in5_input);
device_create_file(&new_client->dev, &dev_attr_in5_min);
device_create_file(&new_client->dev, &dev_attr_in5_max);
device_create_file(&new_client->dev, &dev_attr_in6_input);
device_create_file(&new_client->dev, &dev_attr_in6_min);
device_create_file(&new_client->dev, &dev_attr_in6_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_fan3_input);
device_create_file(&new_client->dev, &dev_attr_fan3_min);
device_create_file(&new_client->dev, &dev_attr_fan3_div);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_vid);
device_create_file(&new_client->dev, &dev_attr_in0_ref);
return 0;
......
This diff is collapsed.
......@@ -201,17 +201,17 @@ static ssize_t show_alarms(struct device *dev, char *buf)
return sprintf(buf, "%d\n", data->alarms);
}
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp_input2, S_IRUGO, show_temp_input2, NULL);
static DEVICE_ATTR(temp_input3, S_IRUGO, show_temp_input3, NULL);
static DEVICE_ATTR(temp_input4, S_IRUGO, show_temp_input4, NULL);
static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_high1,
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
static DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input3, NULL);
static DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input4, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1,
set_temp_high1);
static DEVICE_ATTR(temp_max2, S_IWUSR | S_IRUGO, show_temp_high2,
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
set_temp_high2);
static DEVICE_ATTR(temp_max3, S_IWUSR | S_IRUGO, show_temp_high3,
static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_high3,
set_temp_high3);
static DEVICE_ATTR(temp_max4, S_IWUSR | S_IRUGO, show_temp_high4,
static DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_high4,
set_temp_high4);
static DEVICE_ATTR(temp_crit, S_IWUSR | S_IRUGO, show_temp_crit,
set_temp_crit);
......@@ -320,14 +320,14 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind)
*/
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_input2);
device_create_file(&new_client->dev, &dev_attr_temp_input3);
device_create_file(&new_client->dev, &dev_attr_temp_input4);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_max3);
device_create_file(&new_client->dev, &dev_attr_temp_max4);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp3_input);
device_create_file(&new_client->dev, &dev_attr_temp4_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
device_create_file(&new_client->dev, &dev_attr_temp4_max);
device_create_file(&new_client->dev, &dev_attr_temp_crit);
device_create_file(&new_client->dev, &dev_attr_alarms);
......
......@@ -460,8 +460,8 @@ static ssize_t set_fan_##offset##_min (struct device *dev, \
{ \
return set_fan_min(dev, buf, count, 0x##offset - 1); \
} \
static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_##offset##_min, set_fan_##offset##_min)
show_fan_offset(1);
......@@ -480,7 +480,7 @@ static ssize_t show_vid_reg(struct device *dev, char *buf)
return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL)
static DEVICE_ATTR(in0_ref, S_IRUGO, show_vid_reg, NULL)
static ssize_t show_vrm_reg(struct device *dev, char *buf)
{
......@@ -564,9 +564,9 @@ static ssize_t show_pwm_enable##offset (struct device *dev, char *buf) \
{ \
return show_pwm_enable(dev, buf, 0x##offset - 1); \
} \
static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR, \
show_pwm_##offset, set_pwm_##offset) \
static DEVICE_ATTR(pwm_enable##offset, S_IRUGO, show_pwm_enable##offset, NULL)
static DEVICE_ATTR(fan##offset##_pwm_enable, S_IRUGO, show_pwm_enable##offset, NULL)
show_pwm_reg(1);
show_pwm_reg(2);
......@@ -649,10 +649,10 @@ static ssize_t set_in_##offset##_max (struct device *dev, \
{ \
return set_in_max(dev, buf, count, 0x##offset); \
} \
static DEVICE_ATTR(in_input##offset, S_IRUGO, show_in_##offset, NULL) \
static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, NULL) \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in_##offset##_min, set_in_##offset##_min) \
static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in_##offset##_max, set_in_##offset##_max)
show_in_reg(0);
......@@ -738,10 +738,10 @@ static ssize_t set_temp_##offset##_max (struct device *dev, \
{ \
return set_temp_max(dev, buf, count, 0x##offset - 1); \
} \
static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
show_temp_##offset##_min, set_temp_##offset##_min) \
static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
show_temp_##offset##_max, set_temp_##offset##_max)
show_temp_reg(1);
......@@ -886,46 +886,46 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
lm85_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_input2);
device_create_file(&new_client->dev, &dev_attr_fan_input3);
device_create_file(&new_client->dev, &dev_attr_fan_input4);
device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_min2);
device_create_file(&new_client->dev, &dev_attr_fan_min3);
device_create_file(&new_client->dev, &dev_attr_fan_min4);
device_create_file(&new_client->dev, &dev_attr_pwm1);
device_create_file(&new_client->dev, &dev_attr_pwm2);
device_create_file(&new_client->dev, &dev_attr_pwm3);
device_create_file(&new_client->dev, &dev_attr_pwm_enable1);
device_create_file(&new_client->dev, &dev_attr_pwm_enable2);
device_create_file(&new_client->dev, &dev_attr_pwm_enable3);
device_create_file(&new_client->dev, &dev_attr_in_input0);
device_create_file(&new_client->dev, &dev_attr_in_input1);
device_create_file(&new_client->dev, &dev_attr_in_input2);
device_create_file(&new_client->dev, &dev_attr_in_input3);
device_create_file(&new_client->dev, &dev_attr_in_input4);
device_create_file(&new_client->dev, &dev_attr_in_min0);
device_create_file(&new_client->dev, &dev_attr_in_min1);
device_create_file(&new_client->dev, &dev_attr_in_min2);
device_create_file(&new_client->dev, &dev_attr_in_min3);
device_create_file(&new_client->dev, &dev_attr_in_min4);
device_create_file(&new_client->dev, &dev_attr_in_max0);
device_create_file(&new_client->dev, &dev_attr_in_max1);
device_create_file(&new_client->dev, &dev_attr_in_max2);
device_create_file(&new_client->dev, &dev_attr_in_max3);
device_create_file(&new_client->dev, &dev_attr_in_max4);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_input2);
device_create_file(&new_client->dev, &dev_attr_temp_input3);
device_create_file(&new_client->dev, &dev_attr_temp_min1);
device_create_file(&new_client->dev, &dev_attr_temp_min2);
device_create_file(&new_client->dev, &dev_attr_temp_min3);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_max3);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan3_input);
device_create_file(&new_client->dev, &dev_attr_fan4_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan3_min);
device_create_file(&new_client->dev, &dev_attr_fan4_min);
device_create_file(&new_client->dev, &dev_attr_fan1_pwm);
device_create_file(&new_client->dev, &dev_attr_fan2_pwm);
device_create_file(&new_client->dev, &dev_attr_fan3_pwm);
device_create_file(&new_client->dev, &dev_attr_fan1_pwm_enable);
device_create_file(&new_client->dev, &dev_attr_fan2_pwm_enable);
device_create_file(&new_client->dev, &dev_attr_fan3_pwm_enable);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp3_input);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp3_min);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_vid);
device_create_file(&new_client->dev, &dev_attr_in0_ref);
device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
......
......@@ -245,23 +245,23 @@ static ssize_t show_alarms(struct device *dev, char *buf)
return sprintf(buf, "%d\n", data->alarms);
}
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp_input2, S_IRUGO, show_temp_input2, NULL);
static DEVICE_ATTR(temp_min1, S_IWUSR | S_IRUGO, show_temp_low1,
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_low1,
set_temp_low1);
static DEVICE_ATTR(temp_min2, S_IWUSR | S_IRUGO, show_temp_low2,
static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
set_temp_low2);
static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_high1,
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1,
set_temp_high1);
static DEVICE_ATTR(temp_max2, S_IWUSR | S_IRUGO, show_temp_high2,
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
set_temp_high2);
static DEVICE_ATTR(temp_crit1, S_IWUSR | S_IRUGO, show_temp_crit1,
static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit1,
set_temp_crit1);
static DEVICE_ATTR(temp_crit2, S_IWUSR | S_IRUGO, show_temp_crit2,
static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
set_temp_crit2);
static DEVICE_ATTR(temp_hyst1, S_IWUSR | S_IRUGO, show_temp_hyst1,
static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1,
set_temp_hyst1);
static DEVICE_ATTR(temp_hyst2, S_IRUGO, show_temp_hyst2, NULL);
static DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_hyst2, NULL);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
/*
......@@ -381,16 +381,16 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
lm90_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_input2);
device_create_file(&new_client->dev, &dev_attr_temp_min1);
device_create_file(&new_client->dev, &dev_attr_temp_min2);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_crit1);
device_create_file(&new_client->dev, &dev_attr_temp_crit2);
device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_temp_hyst2);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
device_create_file(&new_client->dev, &dev_attr_temp2_crit);
device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst);
device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
......
......@@ -482,10 +482,10 @@ static ssize_t set_in##offset##_max (struct device *dev, \
{ \
return set_in_max(dev, buf, count, 0x##offset); \
} \
static DEVICE_ATTR(in_input##offset, S_IRUGO, show_in##offset, NULL) \
static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL) \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in##offset##_min, set_in##offset##_min) \
static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in##offset##_max, set_in##offset##_max)
show_in_offset(0);
......@@ -556,10 +556,10 @@ static ssize_t set_temp_##offset##_hyst (struct device *dev, \
{ \
return set_temp_hyst(dev, buf, count, 0x##offset - 1); \
} \
static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
show_temp_##offset##_over, set_temp_##offset##_over) \
static DEVICE_ATTR(temp_hyst##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_##offset##_hyst, set_temp_##offset##_hyst)
show_temp_offset(1);
......@@ -631,10 +631,10 @@ static ssize_t set_fan_##offset##_div (struct device *dev, \
{ \
return set_fan_div(dev, buf, count, 0x##offset - 1); \
} \
static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL) \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_##offset##_min, set_fan_##offset##_min) \
static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \
static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
show_fan_##offset##_div, set_fan_##offset##_div)
show_fan_offset(1);
......@@ -653,7 +653,7 @@ static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver via686a_driver = {
.owner = THIS_MODULE,
.name = "VIA686A",
.name = "via686a",
.id = I2C_DRIVERID_VIA686A,
.flags = I2C_DF_NOTIFY,
.attach_adapter = via686a_attach_adapter,
......@@ -742,36 +742,36 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
via686a_init_client(new_client);
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_in_input0);
device_create_file(&new_client->dev, &dev_attr_in_input1);
device_create_file(&new_client->dev, &dev_attr_in_input2);
device_create_file(&new_client->dev, &dev_attr_in_input3);
device_create_file(&new_client->dev, &dev_attr_in_input4);
device_create_file(&new_client->dev, &dev_attr_in_min0);
device_create_file(&new_client->dev, &dev_attr_in_min1);
device_create_file(&new_client->dev, &dev_attr_in_min2);
device_create_file(&new_client->dev, &dev_attr_in_min3);
device_create_file(&new_client->dev, &dev_attr_in_min4);
device_create_file(&new_client->dev, &dev_attr_in_max0);
device_create_file(&new_client->dev, &dev_attr_in_max1);
device_create_file(&new_client->dev, &dev_attr_in_max2);
device_create_file(&new_client->dev, &dev_attr_in_max3);
device_create_file(&new_client->dev, &dev_attr_in_max4);
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_input2);
device_create_file(&new_client->dev, &dev_attr_temp_input3);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_max3);
device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_temp_hyst2);
device_create_file(&new_client->dev, &dev_attr_temp_hyst3);
device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_input2);
device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_min2);
device_create_file(&new_client->dev, &dev_attr_fan_div1);
device_create_file(&new_client->dev, &dev_attr_fan_div2);
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp3_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp3_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst);
device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
......
This diff is collapsed.
......@@ -12,6 +12,9 @@
* Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
* <khali@linux-fr.org>.
*
* Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
* error handling mechanism.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
......@@ -141,8 +144,8 @@ static ssize_t show_temp_over(struct device *dev, char *buf)
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
}
static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp_max1, S_IRUGO, show_temp_over, NULL)
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL)
/*
* Real code
......@@ -256,8 +259,8 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind)
*/
/* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_input1);
device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
return 0;
......
......@@ -175,7 +175,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
driver = list_entry(item, struct i2c_driver, list);
if (driver->detach_adapter)
if ((res = driver->detach_adapter(adap))) {
dev_warn(&adap->dev, "can't detach adapter"
dev_warn(&adap->dev, "can't detach adapter "
"while detaching driver %s: driver not "
"detached!", driver->name);
goto out_unlock;
......@@ -618,7 +618,7 @@ int i2c_control(struct i2c_client *client,
int ret = 0;
struct i2c_adapter *adap = client->adapter;
dev_dbg(&client->dev, "i2c ioctl, cmd: 0x%x, arg: %#lx\n", cmd, arg);
dev_dbg(&client->adapter->dev, "i2c ioctl, cmd: 0x%x, arg: %#lx\n", cmd, arg);
switch (cmd) {
case I2C_RETRIES:
adap->retries = arg;
......
......@@ -760,7 +760,7 @@ static int __devinitdata sis_96x_compatible = 0;
#define SIS_DETECT_REGISTER 0x40
static void __init quirk_sis_503_smbus(struct pci_dev *dev)
static void __init quirk_sis_503(struct pci_dev *dev)
{
u8 reg;
u16 devid;
......@@ -768,7 +768,7 @@ static void __init quirk_sis_503_smbus(struct pci_dev *dev)
pci_read_config_byte(dev, SIS_DETECT_REGISTER, &reg);
pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
if ((devid & 0xfff0) != 0x0960) {
if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
return;
}
......@@ -880,12 +880,14 @@ static struct pci_fixup pci_fixups[] __devinitdata = {
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma },
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci },
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503_smbus },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus },
{ PCI_FIXUP_HEADER, PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus },
......
......@@ -569,6 +569,7 @@
#define PCI_DEVICE_ID_SI_6202 0x0002
#define PCI_DEVICE_ID_SI_503 0x0008
#define PCI_DEVICE_ID_SI_ACPI 0x0009
#define PCI_DEVICE_ID_SI_LPC 0x0018
#define PCI_DEVICE_ID_SI_5597_VGA 0x0200
#define PCI_DEVICE_ID_SI_6205 0x0205
#define PCI_DEVICE_ID_SI_501 0x0406
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment