Commit de64ee5e authored by Stefan Peter's avatar Stefan Peter Committed by Jason Cooper

ARM: kirkwood: Convert mplcec4 board to pinctrl

Signed-off-by: default avatarStefan Peter <s.peter@mpl.ch>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 9891b3f6
......@@ -34,6 +34,11 @@ pmx_uart1: pmx-uart1 {
marvell,pins = "mpp13", "mpp14";
marvell,function = "uart1";
};
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
marvell,function = "sdio";
};
};
};
};
\ No newline at end of file
};
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
......@@ -16,6 +17,64 @@ chosen {
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_nand &pmx_uart0
&pmx_led_health &pmx_sdio
&pmx_sata0 &pmx_sata1
&pmx_led_user1o
&pmx_led_user1g &pmx_led_user0o
&pmx_led_user0g &pmx_led_misc
&pmx_sdio_cd
>;
pinctrl-names = "default";
pmx_led_health: pmx-led-health {
marvell,pins = "mpp7";
marvell,function = "gpo";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp34";
marvell,function = "sata1";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp35";
marvell,function = "sata0";
};
pmx_led_user1o: pmx-led-user1o {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_user1g: pmx-led-user1g {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_user0o: pmx-led-user0o {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_user0g: pmx-led-user0g {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_misc: pmx-led-misc {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
......
......@@ -24,51 +24,16 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(2),
};
static unsigned int mplcec4_mpp_config[] __initdata = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Status LED Green High Active */
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_SD_CLK,
MPP13_SD_CMD, /* Alt UART1_TXD */
MPP14_SD_D0, /* Alt UART1_RXD */
MPP15_SD_D1,
MPP16_SD_D2,
MPP17_SD_D3,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP28_GPIO, /* Input SYS_POR_DET (active High) */
MPP29_GPIO, /* Input SYS_RTC_INT (active High) */
MPP34_SATA1_ACTn,
MPP35_SATA0_ACTn,
MPP40_GPIO, /* LED User1 orange */
MPP41_GPIO, /* LED User1 green */
MPP44_GPIO, /* LED User0 orange */
MPP45_GPIO, /* LED User0 green */
MPP46_GPIO, /* Status LED Yellow High Active */
MPP47_GPIO, /* SD_CD# (in/IRQ)*/
0
};
static struct mvsdio_platform_data mplcec4_mvsdio_data = {
.gpio_card_detect = 47, /* MPP47 used as SD card detect */
};
void __init mplcec4_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(mplcec4_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&mplcec4_ge00_data);
kirkwood_ge01_init(&mplcec4_ge01_data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment