ARM: kirkwood: Convert mplcec4 board to pinctrl

Signed-off-by: Stefan Peter <s.peter@mpl.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-6281.dtsi

@@ -34,6 +34,11 @@ pmx_uart1: pmx-uart1 {
 				marvell,pins = "mpp13", "mpp14";
 				marvell,function = "uart1";
 			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
 		};
 	};
-};
+};
\ No newline at end of file

arch/arm/boot/dts/kirkwood-mplcec4.dts

 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "MPL CEC4";
@@ -16,6 +17,64 @@ chosen {
         };
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				      &pmx_led_health &pmx_sdio
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_user1o
+				      &pmx_led_user1g &pmx_led_user0o
+				      &pmx_led_user0g &pmx_led_misc
+				      &pmx_sdio_cd
+				    >;
+			pinctrl-names = "default";
+
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
                 i2c@11000 {
                         status = "okay";
 

arch/arm/mach-kirkwood/board-mplcec4.c

@@ -24,51 +24,16 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
 };
 
-static unsigned int mplcec4_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,	/* Status LED Green High Active */
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_SD_CLK,
-	MPP13_SD_CMD,	/* Alt UART1_TXD */
-	MPP14_SD_D0,	/* Alt UART1_RXD */
-	MPP15_SD_D1,
-	MPP16_SD_D2,
-	MPP17_SD_D3,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP28_GPIO,	/* Input SYS_POR_DET (active High) */
-	MPP29_GPIO,	/* Input SYS_RTC_INT (active High) */
-	MPP34_SATA1_ACTn,
-	MPP35_SATA0_ACTn,
-	MPP40_GPIO,	/* LED User1 orange */
-	MPP41_GPIO,	/* LED User1 green */
-	MPP44_GPIO,	/* LED User0 orange */
-	MPP45_GPIO,	/* LED User0 green */
-	MPP46_GPIO,	/* Status LED Yellow High Active */
-	MPP47_GPIO,	/* SD_CD# (in/IRQ)*/
-	0
-};
-
-
 static struct mvsdio_platform_data mplcec4_mvsdio_data = {
 	.gpio_card_detect = 47,	/* MPP47 used as SD card detect */
 };
 
 
-
 void __init mplcec4_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(mplcec4_mpp_config);
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&mplcec4_ge00_data);
 	kirkwood_ge01_init(&mplcec4_ge01_data);