arm: dts: Fix dtc interrupt_map warnings

The dtc interrupt_map warning is off because its dependency,
interrupt_provider, is off by default. Fix all the warnings so it can be
enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts

@@ -60,6 +60,8 @@ pci@c0000000 {
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */

arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts

@@ -89,6 +89,8 @@ pci@c0000000 {
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */

arch/arm/boot/dts/qcom/qcom-sdx55.dtsi

@@ -340,10 +340,10 @@ pcie_rc: pcie@1c00000 {
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,