staging: remove isdn capi drivers

As described in drivers/staging/isdn/TODO, the drivers are all
assumed to be unmaintained and unused now, with gigaset being the
last one to stop being maintained after Paul Bolle lost access
to an ISDN network.

The CAPI subsystem remains for now, as it is still required by
bluetooth/cmtp.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191210210455.3475361-1-arnd@arndb.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/isdn/avmb1.rst

-================================
-Driver for active AVM Controller
-================================
-
-The driver provides a kernel capi2.0 Interface (kernelcapi) and
-on top of this a User-Level-CAPI2.0-interface (capi)
-and a driver to connect isdn4linux with CAPI2.0 (capidrv).
-The lowlevel interface can be used to implement a CAPI2.0
-also for passive cards since July 1999.
-
-The author can be reached at calle@calle.in-berlin.de.
-The command avmcapictrl is part of the isdn4k-utils.
-t4-files can be found at ftp://ftp.avm.de/cardware/b1/linux/firmware
-
-Currently supported cards:
-
-	- B1 ISA (all versions)
-	- B1 PCI
-	- T1/T1B (HEMA card)
-	- M1
-	- M2
-	- B1 PCMCIA
-
-Installing
-----------
-
-You need at least /dev/capi20 to load the firmware.
-
-::
-
-    mknod /dev/capi20 c 68 0
-    mknod /dev/capi20.00 c 68 1
-    mknod /dev/capi20.01 c 68 2
-    .
-    .
-    .
-    mknod /dev/capi20.19 c 68 20
-
-Running
--------
-
-To use the card you need the t4-files to download the firmware.
-AVM GmbH provides several t4-files for the different D-channel
-protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn.
-
-if you configure as modules load the modules this way::
-
-    insmod /lib/modules/current/misc/capiutil.o
-    insmod /lib/modules/current/misc/b1.o
-    insmod /lib/modules/current/misc/kernelcapi.o
-    insmod /lib/modules/current/misc/capidrv.o
-    insmod /lib/modules/current/misc/capi.o
-
-if you have an B1-PCI card load the module b1pci.o::
-
-    insmod /lib/modules/current/misc/b1pci.o
-
-and load the firmware with::
-
-    avmcapictrl load /lib/isdn/b1.t4 1
-
-if you have an B1-ISA card load the module b1isa.o
-and add the card by calling::
-
-    avmcapictrl add 0x150 15
-
-and load the firmware by calling::
-
-    avmcapictrl load /lib/isdn/b1.t4 1
-
-if you have an T1-ISA card load the module t1isa.o
-and add the card by calling::
-
-    avmcapictrl add 0x450 15 T1 0
-
-and load the firmware by calling::
-
-    avmcapictrl load /lib/isdn/t1.t4 1
-
-if you have an PCMCIA card (B1/M1/M2) load the module b1pcmcia.o
-before you insert the card.
-
-Leased Lines with B1
---------------------
-
-Init card and load firmware.
-
-For an D64S use "FV: 1" as phone number
-
-For an D64S2 use "FV: 1" and "FV: 2" for multilink
-or "FV: 1,2" to use CAPI channel bundling.
-
-/proc-Interface
------------------
-
-/proc/capi::
-
-  dr-xr-xr-x   2 root     root            0 Jul  1 14:03 .
-  dr-xr-xr-x  82 root     root            0 Jun 30 19:08 ..
-  -r--r--r--   1 root     root            0 Jul  1 14:03 applications
-  -r--r--r--   1 root     root            0 Jul  1 14:03 applstats
-  -r--r--r--   1 root     root            0 Jul  1 14:03 capi20
-  -r--r--r--   1 root     root            0 Jul  1 14:03 capidrv
-  -r--r--r--   1 root     root            0 Jul  1 14:03 controller
-  -r--r--r--   1 root     root            0 Jul  1 14:03 contrstats
-  -r--r--r--   1 root     root            0 Jul  1 14:03 driver
-  -r--r--r--   1 root     root            0 Jul  1 14:03 ncci
-  -r--r--r--   1 root     root            0 Jul  1 14:03 users
-
-/proc/capi/applications:
-   applid level3cnt datablkcnt datablklen ncci-cnt recvqueuelen
-	level3cnt:
-	    capi_register parameter
-	datablkcnt:
-	    capi_register parameter
-	ncci-cnt:
-	    current number of nccis (connections)
-	recvqueuelen:
-	    number of messages on receive queue
-
-   for example::
-
-	1 -2 16 2048 1 0
-	2 2 7 2048 1 0
-
-/proc/capi/applstats:
-   applid recvctlmsg nrecvdatamsg nsentctlmsg nsentdatamsg
-	recvctlmsg:
-	    capi messages received without DATA_B3_IND
-	recvdatamsg:
-	    capi DATA_B3_IND received
-	sentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	sentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2057 1699 1721 1699
-
-/proc/capi/capi20: statistics of capi.o (/dev/capi20)
-    minor nopen nrecvdropmsg nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	minor:
-	    minor device number of capi device
-	nopen:
-	    number of calls to devices open
-	nrecvdropmsg:
-	    capi messages dropped (messages in recvqueue in close)
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2 18 0 16 2
-
-/proc/capi/capidrv: statistics of capidrv.o (capi messages)
-    nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example:
-	2780 2226 2256 2226
-
-/proc/capi/controller:
-   controller drivername state cardname   controllerinfo
-
-   for example::
-
-	1 b1pci      running  b1pci-e000       B1 3.07-01 0xe000 19
-	2 t1isa      running  t1isa-450        B1 3.07-01 0x450 11 0
-	3 b1pcmcia   running  m2-150           B1 3.07-01 0x150 5
-
-/proc/capi/contrstats:
-    controller nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2845 2272 2310 2274
-	2 2 0 2 0
-	3 2 0 2 0
-
-/proc/capi/driver:
-   drivername ncontroller
-
-   for example::
-
-	b1pci                            1
-	t1isa                            1
-	b1pcmcia                         1
-	b1isa                            0
-
-/proc/capi/ncci:
-   apllid ncci winsize sendwindow
-
-   for example::
-
-	1 0x10101 8 0
-
-/proc/capi/users: kernelmodules that use the kernelcapi.
-   name
-
-   for example::
-
-	capidrv
-	capi20
-
-Questions
----------
-
-Check out the FAQ (ftp.isdn4linux.de) or subscribe to the
-linux-avmb1@calle.in-berlin.de mailing list by sending
-a mail to majordomo@calle.in-berlin.de with
-subscribe linux-avmb1
-in the body.
-
-German documentation and several scripts can be found at
-ftp://ftp.avm.de/cardware/b1/linux/
-
-Bugs
-----
-
-If you find any please let me know.
-
-Enjoy,
-
-Carsten Paeth (calle@calle.in-berlin.de)

Documentation/isdn/hysdn.rst

-============
-Hysdn Driver
-============
-
-The hysdn driver has been written by
-Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
-for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
-under the GNU General Public License.
-
-The CAPI 2.0-support was added by Ulrich Albrecht (ualbrecht@hypercope.de)
-for Hypercope GmbH Aachen, Germany.
-
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-.. Table of contents
-
-    1. About the driver
-
-    2. Loading/Unloading the driver
-
-    3. Entries in the /proc filesystem
-
-    4. The /proc/net/hysdn/cardconfX file
-
-    5. The /proc/net/hysdn/cardlogX file
-
-    6. Where to get additional info and help
-
-
-1. About the driver
-===================
-
-   The drivers/isdn/hysdn subdir contains a driver for HYPERCOPEs active
-   PCI isdn cards Champ, Ergo and Metro. To enable support for this cards
-   enable ISDN support in the kernel config and support for HYSDN cards in
-   the active cards submenu. The driver may only be compiled and used if
-   support for loadable modules and the process filesystem have been enabled.
-
-   These cards provide two different interfaces to the kernel. Without the
-   optional CAPI 2.0 support, they register as ethernet card. IP-routing
-   to a ISDN-destination is performed on the card itself. All necessary
-   handlers for various protocols like ppp and others as well as config info
-   and firmware may be fetched from Hypercopes WWW-Site www.hypercope.de.
-
-   With CAPI 2.0 support enabled, the card can also be used as a CAPI 2.0
-   compliant devices with either CAPI 2.0 applications
-   (check isdn4k-utils) or -using the capidrv module- as a regular
-   isdn4linux device. This is done via the same mechanism as with the
-   active AVM cards and in fact uses the same module.
-
-
-2. Loading/Unloading the driver
-===============================
-
-   The module has no command line parameters and auto detects up to 10 cards
-   in the id-range 0-9.
-   If a loaded driver shall be unloaded all open files in the /proc/net/hysdn
-   subdir need to be closed and all ethernet interfaces allocated by this
-   driver must be shut down. Otherwise the module counter will avoid a module
-   unload.
-
-   If you are using the CAPI 2.0-interface, make sure to load/modprobe the
-   kernelcapi-module first.
-
-   If you plan to use the capidrv-link to isdn4linux, make sure to load
-   capidrv.o after all modules using this driver (i.e. after hysdn and
-   any avm-specific modules).
-
-3. Entries in the /proc filesystem
-==================================
-
-   When the module has been loaded it adds the directory hysdn in the
-   /proc/net tree. This directory contains exactly 2 file entries for each
-   card. One is called cardconfX and the other cardlogX, where X is the
-   card id number from 0 to 9.
-   The cards are numbered in the order found in the PCI config data.
-
-4. The /proc/net/hysdn/cardconfX file
-=====================================
-
-   This file may be read to get by everyone to get info about the cards type,
-   actual state, available features and used resources.
-   The first 3 entries (id, bus and slot) are PCI info fields, the following
-   type field gives the information about the cards type:
-
-   - 4 -> Ergo card (server card with 2 b-chans)
-   - 5 -> Metro card (server card with 4 or 8 b-chans)
-   - 6 -> Champ card (client card with 2 b-chans)
-
-   The following 3 fields show the hardware assignments for irq, iobase and the
-   dual ported memory (dp-mem).
-
-   The fields b-chans and fax-chans announce the available card resources of
-   this types for the user.
-
-   The state variable indicates the actual drivers state for this card with the
-   following assignments.
-
-   - 0 -> card has not been booted since driver load
-   - 1 -> card booting is actually in progess
-   - 2 -> card is in an error state due to a previous boot failure
-   - 3 -> card is booted and active
-
-   And the last field (device) shows the name of the ethernet device assigned
-   to this card. Up to the first successful boot this field only shows a -
-   to tell that no net device has been allocated up to now. Once a net device
-   has been allocated it remains assigned to this card, even if a card is
-   rebooted and an boot error occurs.
-
-   Writing to the cardconfX file boots the card or transfers config lines to
-   the cards firmware. The type of data is automatically detected when the
-   first data is written. Only root has write access to this file.
-   The firmware boot files are normally called hyclient.pof for client cards
-   and hyserver.pof for server cards.
-   After successfully writing the boot file, complete config files or single
-   config lines may be copied to this file.
-   If an error occurs the return value given to the writing process has the
-   following additional codes (decimal):
-
-   ==== ============================================
-   1000 Another process is currently bootng the card
-   1001 Invalid firmware header
-   1002 Boards dual-port RAM test failed
-   1003 Internal firmware handler error
-   1004 Boot image size invalid
-   1005 First boot stage (bootstrap loader) failed
-   1006 Second boot stage failure
-   1007 Timeout waiting for card ready during boot
-   1008 Operation only allowed in booted state
-   1009 Config line too long
-   1010 Invalid channel number
-   1011 Timeout sending config data
-   ==== ============================================
-
-   Additional info about error reasons may be fetched from the log output.
-
-5. The /proc/net/hysdn/cardlogX file
-====================================
-
-   The cardlogX file entry may be opened multiple for reading by everyone to
-   get the cards and drivers log data. Card messages always start with the
-   keyword LOG. All other lines are output from the driver.
-   The driver log data may be redirected to the syslog by selecting the
-   appropriate bitmask. The cards log messages will always be send to this
-   interface but never to the syslog.
-
-   A root user may write a decimal or hex (with 0x) value t this file to select
-   desired output options. As mentioned above the cards log dat is always
-   written to the cardlog file independent of the following options only used
-   to check and debug the driver itself:
-
-   For example::
-
-	echo "0x34560078" > /proc/net/hysdn/cardlog0
-
-   to output the hex log mask 34560078 for card 0.
-
-   The written value is regarded as an unsigned 32-Bit value, bit ored for
-   desired output. The following bits are already assigned:
-
-   ==========   ============================================================
-   0x80000000   All driver log data is alternatively via syslog
-   0x00000001   Log memory allocation errors
-   0x00000010   Firmware load start and close are logged
-   0x00000020   Log firmware record parser
-   0x00000040   Log every firmware write actions
-   0x00000080   Log all card related boot messages
-   0x00000100   Output all config data sent for debugging purposes
-   0x00000200   Only non comment config lines are shown wth channel
-   0x00000400   Additional conf log output
-   0x00001000   Log the asynchronous scheduler actions (config and log)
-   0x00100000   Log all open and close actions to /proc/net/hysdn/card files
-   0x00200000   Log all actions from /proc file entries
-   0x00010000   Log network interface init and deinit
-   ==========   ============================================================
-
-6. Where to get additional info and help
-========================================
-
-   If you have any problems concerning the driver or configuration contact
-   the Hypercope support team (support@hypercope.de) and or the authors
-   Werner Cornelius (werner@isdn4linux or cornelius@titro.de) or
-   Ulrich Albrecht (ualbrecht@hypercope.de).

Documentation/isdn/index.rst

@@ -9,9 +9,6 @@ ISDN
 
    interface_capi
 
-   avmb1
-   gigaset
-   hysdn
    m_isdn
 
    credits

Documentation/userspace-api/ioctl/ioctl-number.rst

@@ -132,7 +132,6 @@ Code  Seq#    Include File                                           Comments
 'F'   80-8F  linux/arcfb.h                                           conflict!
 'F'   DD     video/sstfb.h                                           conflict!
 'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
-'G'   00-0F  linux/gigaset_dev.h                                     conflict!
 'H'   00-7F  linux/hiddev.h                                          conflict!
 'H'   00-0F  linux/hidraw.h                                          conflict!
 'H'   01     linux/mei.h                                             conflict!

MAINTAINERS

@@ -8804,7 +8804,7 @@ S:	Maintained
 F:	drivers/isdn/mISDN
 F:	drivers/isdn/hardware
 
-ISDN/CAPI SUBSYSTEM
+ISDN/CMTP OVER BLUETOOTH
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 L:	netdev@vger.kernel.org
@@ -8812,7 +8812,6 @@ W:	http://www.isdn4linux.de
 S:	Odd Fixes
 F:	Documentation/isdn/
 F:	drivers/isdn/capi/
-F:	drivers/staging/isdn/
 F:	net/bluetooth/cmtp/
 F:	include/linux/isdn/
 F:	include/uapi/linux/isdn/

drivers/staging/Kconfig

@@ -116,8 +116,6 @@ source "drivers/staging/fieldbus/Kconfig"
 
 source "drivers/staging/kpc2000/Kconfig"
 
-source "drivers/staging/isdn/Kconfig"
-
 source "drivers/staging/wusbcore/Kconfig"
 source "drivers/staging/uwb/Kconfig"
 

drivers/staging/Makefile

@@ -48,7 +48,6 @@ obj-$(CONFIG_STAGING_GASKET_FRAMEWORK)	+= gasket/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_KPC2000)		+= kpc2000/
-obj-$(CONFIG_ISDN_CAPI)		+= isdn/
 obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_WUSB)		+= wusbcore/
 obj-$(CONFIG_EXFAT_FS)		+= exfat/

drivers/staging/isdn/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-menu "ISDN CAPI drivers"
-	depends on ISDN_CAPI
-
-source "drivers/staging/isdn/avm/Kconfig"
-
-source "drivers/staging/isdn/gigaset/Kconfig"
-
-source "drivers/staging/isdn/hysdn/Kconfig"
-
-endmenu
-

drivers/staging/isdn/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the kernel ISDN subsystem and device drivers.
-
-# Object files in subdirectories
-
-obj-$(CONFIG_CAPI_AVM)			+= avm/
-obj-$(CONFIG_HYSDN)			+= hysdn/
-obj-$(CONFIG_ISDN_DRV_GIGASET)		+= gigaset/

drivers/staging/isdn/TODO

-TODO: Remove in late 2019 unless there are users
-
-
-I tried to find any indication of whether the capi drivers are
-still in use, and have not found anything  from a long time ago.
-
-With public ISDN networks almost completely shut down over the past 12
-months, there is very little you can actually do with this hardware. The
-main remaining use case would be to connect ISDN voice phones to an
-in-house installation with Asterisk or LCR, but anyone trying this in
-turn seems to be using either the mISDN driver stack, or out-of-tree
-drivers from the hardware vendors.
-
-I may of course have missed something, so I would suggest moving
-these into drivers/staging/ just in case someone still uses one
-of the three remaining in-kernel drivers (avm, hysdn, gigaset).
-
-If nobody complains, we can remove them entirely in six months,
-or otherwise move the core code and any drivers that are still
-needed back into drivers/isdn.
-
-  Arnd Bergmann <arnd@arndb.de>

drivers/staging/isdn/avm/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-#
-# ISDN AVM drivers
-#
-
-menuconfig CAPI_AVM
-	bool "Active AVM cards"
-	help
-	  Enable support for AVM active ISDN cards.
-
-if CAPI_AVM
-
-config ISDN_DRV_AVMB1_B1ISA
-	tristate "AVM B1 ISA support"
-	depends on ISA
-	help
-	  Enable support for the ISA version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_B1PCI
-	tristate "AVM B1 PCI support"
-	depends on PCI
-	help
-	  Enable support for the PCI version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_B1PCIV4
-	bool "AVM B1 PCI V4 support"
-	depends on ISDN_DRV_AVMB1_B1PCI
-	help
-	  Enable support for the V4 version of AVM B1 PCI card.
-
-config ISDN_DRV_AVMB1_T1ISA
-	tristate "AVM T1/T1-B ISA support"
-	depends on ISA
-	help
-	  Enable support for the AVM T1 T1B card.
-	  Note: This is a PRI card and handle 30 B-channels.
-
-config ISDN_DRV_AVMB1_B1PCMCIA
-	tristate "AVM B1/M1/M2 PCMCIA support"
-	depends on PCMCIA
-	help
-	  Enable support for the PCMCIA version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_AVM_CS
-	tristate "AVM B1/M1/M2 PCMCIA cs module"
-	depends on ISDN_DRV_AVMB1_B1PCMCIA
-	help
-	  Enable the PCMCIA client driver for the AVM B1/M1/M2
-	  PCMCIA cards.
-
-config ISDN_DRV_AVMB1_T1PCI
-	tristate "AVM T1/T1-B PCI support"
-	depends on PCI
-	help
-	  Enable support for the AVM T1 T1B card.
-	  Note: This is a PRI card and handle 30 B-channels.
-
-config ISDN_DRV_AVMB1_C4
-	tristate "AVM C4/C2 support"
-	depends on PCI
-	help
-	  Enable support for the AVM C4/C2 PCI cards.
-	  These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-endif # CAPI_AVM

drivers/staging/isdn/avm/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the AVM ISDN device drivers
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA)	+= b1isa.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCI)	+= b1pci.o b1.o b1dma.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCMCIA)	+= b1pcmcia.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_AVM_CS)	+= avm_cs.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_T1ISA)	+= t1isa.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_T1PCI)	+= t1pci.o b1.o b1dma.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_C4)		+= c4.o b1.o

drivers/staging/isdn/avm/avm_cs.c

-/* $Id: avm_cs.c,v 1.4.6.3 2001/09/23 22:24:33 kai Exp $
- *
- * A PCMCIA client driver for AVM B1/M1/M2
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <asm/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-
-#include <linux/skbuff.h>
-#include <linux/capi.h>
-#include <linux/b1lli.h>
-#include <linux/b1pcmcia.h>
-
-/*====================================================================*/
-
-MODULE_DESCRIPTION("CAPI4Linux: PCMCIA client driver for AVM B1/M1/M2");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/*====================================================================*/
-
-static int avmcs_config(struct pcmcia_device *link);
-static void avmcs_release(struct pcmcia_device *link);
-static void avmcs_detach(struct pcmcia_device *p_dev);
-
-static int avmcs_probe(struct pcmcia_device *p_dev)
-{
-	/* General socket configuration */
-	p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-	p_dev->config_index = 1;
-	p_dev->config_regs = PRESENT_OPTION;
-
-	return avmcs_config(p_dev);
-} /* avmcs_attach */
-
-
-static void avmcs_detach(struct pcmcia_device *link)
-{
-	avmcs_release(link);
-} /* avmcs_detach */
-
-static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
-{
-	p_dev->resource[0]->end = 16;
-	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
-	return pcmcia_request_io(p_dev);
-}
-
-static int avmcs_config(struct pcmcia_device *link)
-{
-	int i = -1;
-	char devname[128];
-	int cardtype;
-	int (*addcard)(unsigned int port, unsigned irq);
-
-	devname[0] = 0;
-	if (link->prod_id[1])
-		strlcpy(devname, link->prod_id[1], sizeof(devname));
-
-	/*
-	 * find IO port
-	 */
-	if (pcmcia_loop_config(link, avmcs_configcheck, NULL))
-		return -ENODEV;
-
-	do {
-		if (!link->irq) {
-			/* undo */
-			pcmcia_disable_device(link);
-			break;
-		}
-
-		/*
-		 * configure the PCMCIA socket
-		 */
-		i = pcmcia_enable_device(link);
-		if (i != 0) {
-			pcmcia_disable_device(link);
-			break;
-		}
-
-	} while (0);
-
-	if (devname[0]) {
-		char *s = strrchr(devname, ' ');
-		if (!s)
-			s = devname;
-		else s++;
-		if (strcmp("M1", s) == 0) {
-			cardtype = AVM_CARDTYPE_M1;
-		} else if (strcmp("M2", s) == 0) {
-			cardtype = AVM_CARDTYPE_M2;
-		} else {
-			cardtype = AVM_CARDTYPE_B1;
-		}
-	} else
-		cardtype = AVM_CARDTYPE_B1;
-
-	/* If any step failed, release any partially configured state */
-	if (i != 0) {
-		avmcs_release(link);
-		return -ENODEV;
-	}
-
-
-	switch (cardtype) {
-	case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
-	case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
-	default:
-	case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
-	}
-	if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) {
-		dev_err(&link->dev,
-			"avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
-			(unsigned int) link->resource[0]->start, link->irq);
-		avmcs_release(link);
-		return -ENODEV;
-	}
-	return 0;
-
-} /* avmcs_config */
-
-
-static void avmcs_release(struct pcmcia_device *link)
-{
-	b1pcmcia_delcard(link->resource[0]->start, link->irq);
-	pcmcia_disable_device(link);
-} /* avmcs_release */
-
-
-static const struct pcmcia_device_id avmcs_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN-Controller B1", 0x95d42008, 0x845dc335),
-	PCMCIA_DEVICE_PROD_ID12("AVM", "Mobile ISDN-Controller M1", 0x95d42008, 0x81e10430),
-	PCMCIA_DEVICE_PROD_ID12("AVM", "Mobile ISDN-Controller M2", 0x95d42008, 0x18e8558a),
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, avmcs_ids);
-
-static struct pcmcia_driver avmcs_driver = {
-	.owner	= THIS_MODULE,
-	.name		= "avm_cs",
-	.probe = avmcs_probe,
-	.remove	= avmcs_detach,
-	.id_table = avmcs_ids,
-};
-module_pcmcia_driver(avmcs_driver);

drivers/staging/isdn/avm/b1isa.c

-/* $Id: b1isa.c,v 1.1.2.3 2004/02/10 01:07:12 keil Exp $
- *
- * Module for AVM B1 ISA-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/capi.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.3 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM B1 ISA card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static void b1isa_remove(struct pci_dev *pdev)
-{
-	avmctrl_info *cinfo = pci_get_drvdata(pdev);
-	avmcard *card;
-
-	if (!cinfo)
-		return;
-
-	card = cinfo->card;
-
-	b1_reset(card->port);
-	b1_reset(card->port);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	release_region(card->port, AVMB1_PORTLEN);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static char *b1isa_procinfo(struct capi_ctr *ctrl);
-
-static int b1isa_probe(struct pci_dev *pdev)
-{
-	avmctrl_info *cinfo;
-	avmcard *card;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1isa: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	cinfo = card->ctrlinfo;
-
-	card->port = pci_resource_start(pdev, 0);
-	card->irq = pdev->irq;
-	card->cardtype = avm_b1isa;
-	sprintf(card->name, "b1isa-%x", card->port);
-
-	if (card->port != 0x150 && card->port != 0x250
-	    && card->port != 0x300 && card->port != 0x340) {
-		printk(KERN_WARNING "b1isa: invalid port 0x%x.\n", card->port);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (b1_irq_table[card->irq & 0xf] == 0) {
-		printk(KERN_WARNING "b1isa: irq %d not valid.\n", card->irq);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "b1isa: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	retval = request_irq(card->irq, b1_interrupt, 0, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1isa: unable to get IRQ %d.\n", card->irq);
-		goto err_release_region;
-	}
-	b1_reset(card->port);
-	if ((retval = b1_detect(card->port, card->cardtype)) != 0) {
-		printk(KERN_NOTICE "b1isa: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_free_irq;
-	}
-	b1_reset(card->port);
-	b1_getrevision(card);
-
-	cinfo->capi_ctrl.owner = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "b1isa";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = b1_send_message;
-	cinfo->capi_ctrl.load_firmware = b1_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1isa_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1isa: attach controller failed.\n");
-		goto err_free_irq;
-	}
-
-	printk(KERN_INFO "b1isa: AVM B1 ISA at i/o %#x, irq %d, revision %d\n",
-	       card->port, card->irq, card->revision);
-
-	pci_set_drvdata(pdev, cinfo);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-static char *b1isa_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-#define MAX_CARDS 4
-static struct pci_dev isa_dev[MAX_CARDS];
-static int io[MAX_CARDS];
-static int irq[MAX_CARDS];
-
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-
-static int b1isa_add_card(struct capi_driver *driver, capicardparams *data)
-{
-	int i;
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (isa_dev[i].resource[0].start)
-			continue;
-
-		isa_dev[i].resource[0].start = data->port;
-		isa_dev[i].irq = data->irq;
-
-		if (b1isa_probe(&isa_dev[i]) == 0)
-			return 0;
-	}
-	return -ENODEV;
-}
-
-static struct capi_driver capi_driver_b1isa = {
-	.name		= "b1isa",
-	.revision	= "1.0",
-	.add_card       = b1isa_add_card,
-};
-
-static int __init b1isa_init(void)
-{
-	char *p;
-	char rev[32];
-	int i;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (!io[i])
-			break;
-
-		isa_dev[i].resource[0].start = io[i];
-		isa_dev[i].irq = irq[i];
-
-		if (b1isa_probe(&isa_dev[i]) != 0)
-			return -ENODEV;
-	}
-
-	strlcpy(capi_driver_b1isa.revision, rev, 32);
-	register_capi_driver(&capi_driver_b1isa);
-	printk(KERN_INFO "b1isa: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1isa_exit(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (isa_dev[i].resource[0].start)
-			b1isa_remove(&isa_dev[i]);
-	}
-	unregister_capi_driver(&capi_driver_b1isa);
-}
-
-module_init(b1isa_init);
-module_exit(b1isa_exit);

drivers/staging/isdn/avm/b1pcmcia.c

-/* $Id: b1pcmcia.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM B1/M1/M2 PCMCIA-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/capi.h>
-#include <linux/b1pcmcia.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.2 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM PCMCIA cards");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static void b1pcmcia_remove_ctr(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-
-	b1_reset(port);
-	b1_reset(port);
-
-	detach_capi_ctr(ctrl);
-	free_irq(card->irq, card);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static LIST_HEAD(cards);
-
-static char *b1pcmcia_procinfo(struct capi_ctr *ctrl);
-
-static int b1pcmcia_add_card(unsigned int port, unsigned irq,
-			     enum avmcardtype cardtype)
-{
-	avmctrl_info *cinfo;
-	avmcard *card;
-	char *cardname;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1pcmcia: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-	cinfo = card->ctrlinfo;
-
-	switch (cardtype) {
-	case avm_m1: sprintf(card->name, "m1-%x", port); break;
-	case avm_m2: sprintf(card->name, "m2-%x", port); break;
-	default: sprintf(card->name, "b1pcmcia-%x", port); break;
-	}
-	card->port = port;
-	card->irq = irq;
-	card->cardtype = cardtype;
-
-	retval = request_irq(card->irq, b1_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1pcmcia: unable to get IRQ %d.\n",
-		       card->irq);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	b1_reset(card->port);
-	if ((retval = b1_detect(card->port, card->cardtype)) != 0) {
-		printk(KERN_NOTICE "b1pcmcia: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_free_irq;
-	}
-	b1_reset(card->port);
-	b1_getrevision(card);
-
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "b1pcmcia";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = b1_send_message;
-	cinfo->capi_ctrl.load_firmware = b1_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1pcmcia_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1pcmcia: attach controller failed.\n");
-		goto err_free_irq;
-	}
-	switch (cardtype) {
-	case avm_m1: cardname = "M1"; break;
-	case avm_m2: cardname = "M2"; break;
-	default: cardname = "B1 PCMCIA"; break;
-	}
-
-	printk(KERN_INFO "b1pcmcia: AVM %s at i/o %#x, irq %d, revision %d\n",
-	       cardname, card->port, card->irq, card->revision);
-
-	list_add(&card->list, &cards);
-	return cinfo->capi_ctrl.cnr;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static char *b1pcmcia_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-int b1pcmcia_addcard_b1(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_b1pcmcia);
-}
-
-int b1pcmcia_addcard_m1(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_m1);
-}
-
-int b1pcmcia_addcard_m2(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_m2);
-}
-
-int b1pcmcia_delcard(unsigned int port, unsigned irq)
-{
-	struct list_head *l;
-	avmcard *card;
-
-	list_for_each(l, &cards) {
-		card = list_entry(l, avmcard, list);
-		if (card->port == port && card->irq == irq) {
-			b1pcmcia_remove_ctr(&card->ctrlinfo[0].capi_ctrl);
-			return 0;
-		}
-	}
-	return -ESRCH;
-}
-
-EXPORT_SYMBOL(b1pcmcia_addcard_b1);
-EXPORT_SYMBOL(b1pcmcia_addcard_m1);
-EXPORT_SYMBOL(b1pcmcia_addcard_m2);
-EXPORT_SYMBOL(b1pcmcia_delcard);
-
-static struct capi_driver capi_driver_b1pcmcia = {
-	.name		= "b1pcmcia",
-	.revision	= "1.0",
-};
-
-static int __init b1pcmcia_init(void)
-{
-	char *p;
-	char rev[32];
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	strlcpy(capi_driver_b1pcmcia.revision, rev, 32);
-	register_capi_driver(&capi_driver_b1pcmcia);
-	printk(KERN_INFO "b1pci: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1pcmcia_exit(void)
-{
-	unregister_capi_driver(&capi_driver_b1pcmcia);
-}
-
-module_init(b1pcmcia_init);
-module_exit(b1pcmcia_exit);

drivers/staging/isdn/avm/t1pci.c

-/* $Id: t1pci.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM T1 PCI-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/capi.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-#undef CONFIG_T1PCI_DEBUG
-#undef CONFIG_T1PCI_POLLDEBUG
-
-/* ------------------------------------------------------------- */
-static char *revision = "$Revision: 1.1.2.2 $";
-/* ------------------------------------------------------------- */
-
-static struct pci_device_id t1pci_pci_tbl[] = {
-	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_T1, PCI_ANY_ID, PCI_ANY_ID },
-	{ }				/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(pci, t1pci_pci_tbl);
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM T1 PCI card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static char *t1pci_procinfo(struct capi_ctr *ctrl);
-
-static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "t1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	card->dma = avmcard_dma_alloc("t1pci", pdev, 2048 + 128, 2048 + 128);
-	if (!card->dma) {
-		printk(KERN_WARNING "t1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err_free;
-	}
-
-	cinfo = card->ctrlinfo;
-	sprintf(card->name, "t1pci-%x", p->port);
-	card->port = p->port;
-	card->irq = p->irq;
-	card->membase = p->membase;
-	card->cardtype = avm_t1pci;
-
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "t1pci: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free_dma;
-	}
-
-	card->mbase = ioremap(card->membase, 64);
-	if (!card->mbase) {
-		printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n",
-		       card->membase);
-		retval = -EIO;
-		goto err_release_region;
-	}
-
-	b1dma_reset(card);
-
-	retval = t1pci_detect(card);
-	if (retval != 0) {
-		if (retval < 6)
-			printk(KERN_NOTICE "t1pci: NO card at 0x%x (%d)\n",
-			       card->port, retval);
-		else
-			printk(KERN_NOTICE "t1pci: card at 0x%x, but cable not connected or T1 has no power (%d)\n",
-			       card->port, retval);
-		retval = -EIO;
-		goto err_unmap;
-	}
-	b1dma_reset(card);
-
-	retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "t1pci: unable to get IRQ %d.\n", card->irq);
-		retval = -EBUSY;
-		goto err_unmap;
-	}
-
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "t1pci";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1dma_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1dma_release_appl;
-	cinfo->capi_ctrl.send_message  = b1dma_send_message;
-	cinfo->capi_ctrl.load_firmware = b1dma_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1dma_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = t1pci_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1dma_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "t1pci: attach controller failed.\n");
-		retval = -EBUSY;
-		goto err_free_irq;
-	}
-	card->cardnr = cinfo->capi_ctrl.cnr;
-
-	printk(KERN_INFO "t1pci: AVM T1 PCI at i/o %#x, irq %d, mem %#lx\n",
-	       card->port, card->irq, card->membase);
-
-	pci_set_drvdata(pdev, card);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_unmap:
-	iounmap(card->mbase);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free_dma:
-	avmcard_dma_free(card->dma);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static void t1pci_remove(struct pci_dev *pdev)
-{
-	avmcard *card = pci_get_drvdata(pdev);
-	avmctrl_info *cinfo = card->ctrlinfo;
-
-	b1dma_reset(card);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	iounmap(card->mbase);
-	release_region(card->port, AVMB1_PORTLEN);
-	avmcard_dma_free(card->dma);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static char *t1pci_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->membase : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-static int t1pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
-{
-	struct capicardparams param;
-	int retval;
-
-	if (pci_enable_device(dev) < 0) {
-		printk(KERN_ERR	"t1pci: failed to enable AVM-T1-PCI\n");
-		return -ENODEV;
-	}
-	pci_set_master(dev);
-
-	param.port = pci_resource_start(dev, 1);
-	param.irq = dev->irq;
-	param.membase = pci_resource_start(dev, 0);
-
-	printk(KERN_INFO "t1pci: PCI BIOS reports AVM-T1-PCI at i/o %#x, irq %d, mem %#x\n",
-	       param.port, param.irq, param.membase);
-
-	retval = t1pci_add_card(&param, dev);
-	if (retval != 0) {
-		printk(KERN_ERR "t1pci: no AVM-T1-PCI at i/o %#x, irq %d detected, mem %#x\n",
-		       param.port, param.irq, param.membase);
-		pci_disable_device(dev);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static struct pci_driver t1pci_pci_driver = {
-	.name           = "t1pci",
-	.id_table       = t1pci_pci_tbl,
-	.probe          = t1pci_probe,
-	.remove         = t1pci_remove,
-};
-
-static struct capi_driver capi_driver_t1pci = {
-	.name		= "t1pci",
-	.revision	= "1.0",
-};
-
-static int __init t1pci_init(void)
-{
-	char *p;
-	char rev[32];
-	int err;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	err = pci_register_driver(&t1pci_pci_driver);
-	if (!err) {
-		strlcpy(capi_driver_t1pci.revision, rev, 32);
-		register_capi_driver(&capi_driver_t1pci);
-		printk(KERN_INFO "t1pci: revision %s\n", rev);
-	}
-	return err;
-}
-
-static void __exit t1pci_exit(void)
-{
-	unregister_capi_driver(&capi_driver_t1pci);
-	pci_unregister_driver(&t1pci_pci_driver);
-}
-
-module_init(t1pci_init);
-module_exit(t1pci_exit);

drivers/staging/isdn/gigaset/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ISDN_DRV_GIGASET
-	tristate "Siemens Gigaset support"
-	depends on TTY
-	select CRC_CCITT
-	select BITREVERSE
-	help
-	  This driver supports the Siemens Gigaset SX205/255 family of
-	  ISDN DECT bases, including the predecessors Gigaset 3070/3075
-	  and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
-	  721X.
-	  If you have one of these devices, say M here and for at least
-	  one of the connection specific parts that follow.
-	  This will build a module called "gigaset".
-	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
-	  as a module, you have to build this driver as a module too,
-	  otherwise the Gigaset device won't show up as an ISDN device.
-
-if ISDN_DRV_GIGASET
-
-config GIGASET_CAPI
-	bool "Gigaset CAPI support"
-	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
-	default 'y'
-	help
-	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
-	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
-	  subsystem you'll have to enable the capidrv glue driver.
-	  (select ISDN_CAPI_CAPIDRV.)
-	  Say N to build the old native ISDN4Linux variant.
-	  If unsure, say Y.
-
-config GIGASET_BASE
-	tristate "Gigaset base station support"
-	depends on USB
-	help
-	  Say M here if you want to use the USB interface of the Gigaset
-	  base for connection to your system.
-	  This will build a module called "bas_gigaset".
-
-config GIGASET_M105
-	tristate "Gigaset M105 support"
-	depends on USB
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
-	  This will build a module called "usb_gigaset".
-
-config GIGASET_M101
-	tristate "Gigaset M101 support"
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
-	  This will build a module called "ser_gigaset".
-
-config GIGASET_DEBUG
-	bool "Gigaset debugging"
-	help
-	  This enables debugging code in the Gigaset drivers.
-	  If in doubt, say yes.
-
-endif # ISDN_DRV_GIGASET

drivers/staging/isdn/gigaset/Makefile

-# SPDX-License-Identifier: GPL-2.0
-gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
-
-ifdef CONFIG_GIGASET_CAPI
-gigaset-y += capi.o
-else
-gigaset-y += dummyll.o
-endif
-
-usb_gigaset-y := usb-gigaset.o
-ser_gigaset-y := ser-gigaset.o
-bas_gigaset-y := bas-gigaset.o isocdata.o
-
-obj-$(CONFIG_ISDN_DRV_GIGASET) += gigaset.o
-obj-$(CONFIG_GIGASET_M105) += usb_gigaset.o
-obj-$(CONFIG_GIGASET_BASE) += bas_gigaset.o
-obj-$(CONFIG_GIGASET_M101) += ser_gigaset.o

drivers/staging/isdn/gigaset/dummyll.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Dummy LL interface for the Gigaset driver
- *
- * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include <linux/export.h>
-#include "gigaset.h"
-
-void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_sent);
-
-void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
-
-void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
-
-int gigaset_isdn_icall(struct at_state_t *at_state)
-{
-	return ICALL_IGNORE;
-}
-
-void gigaset_isdn_connD(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_hupD(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_connB(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_hupB(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_start(struct cardstate *cs)
-{
-}
-
-void gigaset_isdn_stop(struct cardstate *cs)
-{
-}
-
-int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
-{
-	return 0;
-}
-
-void gigaset_isdn_unregdev(struct cardstate *cs)
-{
-}
-
-void gigaset_isdn_regdrv(void)
-{
-	pr_info("no ISDN subsystem interface\n");
-}
-
-void gigaset_isdn_unregdrv(void)
-{
-}

drivers/staging/isdn/gigaset/proc.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Stuff used by all variants of the driver
- *
- * Copyright (c) 2001 by Stefan Eilers,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-
-static ssize_t show_cidmode(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	struct cardstate *cs = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%u\n", cs->cidmode);
-}
-
-static ssize_t set_cidmode(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct cardstate *cs = dev_get_drvdata(dev);
-	long int value;
-	char *end;
-
-	value = simple_strtol(buf, &end, 0);
-	while (*end)
-		if (!isspace(*end++))
-			return -EINVAL;
-	if (value < 0 || value > 1)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	cs->waiting = 1;
-	if (!gigaset_add_event(cs, &cs->at_state, EV_PROC_CIDMODE,
-			       NULL, value, NULL)) {
-		cs->waiting = 0;
-		mutex_unlock(&cs->mutex);
-		return -ENOMEM;
-	}
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	mutex_unlock(&cs->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(cidmode, S_IRUGO | S_IWUSR, show_cidmode, set_cidmode);
-
-/* free sysfs for device */
-void gigaset_free_dev_sysfs(struct cardstate *cs)
-{
-	if (!cs->tty_dev)
-		return;
-
-	gig_dbg(DEBUG_INIT, "removing sysfs entries");
-	device_remove_file(cs->tty_dev, &dev_attr_cidmode);
-}
-
-/* initialize sysfs for device */
-void gigaset_init_dev_sysfs(struct cardstate *cs)
-{
-	if (!cs->tty_dev)
-		return;
-
-	gig_dbg(DEBUG_INIT, "setting up sysfs");
-	if (device_create_file(cs->tty_dev, &dev_attr_cidmode))
-		pr_err("could not create sysfs attribute\n");
-}