arm64: dts: mt8183: Configure CPU cooling

Add two passive trip points at 68°C and 80°C for the CPU temperature.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm64/boot/dts/mediatek/mt8183.dtsi

@@ -13,6 +13,7 @@
 #include <dt-bindings/power/mt8183-power.h>
 #include <dt-bindings/reset-controller/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -678,6 +679,61 @@ cpu_thermal: cpu_thermal {
 				polling-delay = <500>;
 				thermal-sensors = <&thermal 0>;
 				sustainable-power = <5000>;
+
+				trips {
+					threshold: trip-point@0 {
+						temperature = <68000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					target: trip-point@1 {
+						temperature = <80000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_crit: cpu-crit {
+						temperature = <115000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						cooling-device = <&cpu0
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu1
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu2
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu3
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+						contribution = <3072>;
+					};
+					map1 {
+						trip = <&target>;
+						cooling-device = <&cpu4
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu5
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu6
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu7
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+						contribution = <1024>;
+					};
+				};
 			};
 
 			/* The tzts1 ~ tzts6 don't need to polling */