This patch adds ABI document for the following sysfs file:

/sys/bus/pci/devices/.../d3cold_allowed
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch fixes the following bug:

http://marc.info/?l=linux-pci&m=134338059022620&w=2

Where lspci does not work properly if a device and the corresponding
parent bridge (such as PCIe port) is suspended.  This is because the
device configuration space registers will be not accessible if the
corresponding parent bridge is suspended or the device is put into
D3cold state.

To solve the issue, the bridge/PCIe port connected to the device is
put into active state before read/write configuration space registers.
If the device is in D3cold state, it will be put into active state
too.

To avoid resume/suspend PCIe port for each configuration register
read/write, a small delay is added before the PCIe port to go
suspended.
Reported-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch fixes the following bug:

http://marc.info/?l=linux-pci&m=134329923124234&w=2

The root cause of the bug is as follow.

If a device is not bound with the corresponding driver, the device
runtime PM will be disabled and the device will be put into suspended
state.  So that, the bridge/PCIe port connected to it may be put into
suspended and low power state.  When do probing for the device later,
because the bridge/PCIe port connected to it is in low power state,
the IO access to device may fail.

To solve the issue, the bridge/PCIe port connected to the device is
put into active state before probing.
Reported-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch fixes the following bug:

http://marc.info/?l=linux-usb&m=134318961120825&w=2

Originally, device lower power states include D1, D2, D3.  After that,
D3 is further divided into D3hot and D3cold.  To support both scenario
safely, original D3 is mapped to D3cold.

When adding D3cold support, because worry about some device may have
broken D3cold support, D3cold is disabled by default.  This disable D3
on original platform too.  But some original platform may only have
working D3, but no working D1, D2.  The root cause of the above bug is
it too.

To deal with this, this patch enables D3/D3cold by default for most
devices.  This restores the original behavior.  For some devices that
suspected to have broken D3cold support, such as PCIe port, D3cold is
disabled by default.
Reported-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull m68knommu arch fixes from Greg Ungerer:
 "This contains 2 fixes.  One fixes compilation of ColdFire clk code,
  the other makes sure we use the generic atomic64 support on all m68k
  targets."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types
  m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types

Merge tag 'pinctrl-fixes-v3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 - Fixed Nomadik errorpath
 - Fixed documentation spelling errors
 - Forward-declare struct device in a header file
 - Remove some extraneous code lines when getting pinctrl states
 - Correct the i.MX51 configure register number
 - Fix the Nomadik keypad function group list

* tag 'pinctrl-fixes-v3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: add kp_b_2 keyboard function group list
  pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI
  trivial: pinctrl core: remove extraneous code lines
  pinctrl: header: trivial: declare struct device
  Documentation/pinctrl.txt: Fix some misspelled macros
  pinctrl/nomadik: fix null in irqdomain errorpath

Pull sound fixes from Takashi Iwai:
 "This update became slightly bigger than usual for rc3, but most of the
  commits are small and trivial.  A large chunk is found for HD-audio
  ca0132 codec, which is mostly a clean up of the specific code, to make
  SPDIF working properly, and also in the new ASoC Arizona driver.

  One important fix is for usb-audio Oops fix since 3.5.  We still see
  some EHCI related bandwidth problem, but usb-audio should be more
  stabilized now.

  Other than that, a Kconfig fix is spread over files, and various
  HD-audio and ASoC fixes as usual, in addition to Julia's error path
  fixes."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits)
  ALSA: snd-als100: fix suspend/resume
  ALSA: hda - Fix leftover codec->power_transition
  ALSA: hda - don't create dysfunctional mixer controls for ca0132
  ALSA: sound/ppc/snd_ps3.c: fix error return code
  ALSA: sound/pci/rme9652/hdspm.c: fix error return code
  ALSA: sound/pci/sis7019.c: fix error return code
  ALSA: sound/pci/ctxfi/ctatc.c: fix error return code
  ALSA: sound/atmel/ac97c.c: fix error return code
  ALSA: sound/atmel/abdac.c: fix error return code
  ALSA: fix pcm.h kernel-doc warning and notation
  sound: oss/sb_audio: prevent divide by zero bug
  ASoC: wm9712: Fix inverted capture volume
  ASoC: wm9712: Fix microphone source selection
  ASoC: wm5102: Remove DRC2
  ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx
  ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream
  ALSA: lx6464es: Add a missing error check
  ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switch
  ASoC: jack: Always notify full jack status
  ASoC: wm5110: Add missing input PGA routes
  ...

It seems commit 4a9d4b02 ("switch fput to task_work_add") re-
introduced the problem addressed in 944be0b2 ("close_files(): add
scheduling point")

If a server process with a lot of files (say 2 million tcp sockets) is
killed, we can spend a lot of time in task_work_run() and trigger a soft
lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

So we've had a fair few reports of fbcon handover breakage between
efi/vesafb and i915 surface recently, so I dedicated a couple of
days to finding the problem.

Essentially the last thing we saw was the conflicting framebuffer
message and that was all.

So after much tracing with direct netconsole writes (printks
under console_lock not so useful), I think I found the race.

  Thread A (driver load)    Thread B (timer thread)
    unbind_con_driver ->              |
    bind_con_driver ->                |
    vc->vc_sw->con_deinit ->          |
    fbcon_deinit ->                   |
    console_lock()                    |
        |                             |
        |                       fbcon_flashcursor timer fires
        |                       console_lock() <- blocked for A
        |
        |
  fbcon_del_cursor_timer ->
    del_timer_sync
    (BOOM)

Of course because all of this is under the console lock,
we never see anything, also since we also just unbound the active
console guess what we never see anything.

Hopefully this fixes the problem for anyone seeing vesafb->kms
driver handoff.
Signed-off-by: David Airlie <airlied@redhat.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable@vger.kernel.org
Tested-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

snd_card_als100_probe() does not set pcm field in struct snd_sb.
As a result, PCM is not suspended and applications don't know that they need
to resume the playback.

Tested with Labway A381-F20 card (ALS120).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull PCI fixes from Bjorn Helgaas:
 "Here are two patches from Rafael Wysocki.

  One fixes an EHCI-related hibernation crash on ASUS boxes.  We fixed a
  similar suspend issue in v3.6-rc1, and this applies the same fix to
  the hibernate path.

  The other fixes D3/D3cold/D4 messages related to the D3cold support we
  merged in v3.6-rc1."

(Removed redundant top non-fast-forward merge commit from pulled branch)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: EHCI: Fix crash during hibernation on ASUS computers
  PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state()

Pull config cleanup for ia64 from Tony Luck:
 "Clean out references to dead CONFIG_MISC_DEVICES option"

* tag 'please-pull-ia64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] defconfig: Remove CONFIG_MISC_DEVICES

Pull more USB patches from Greg Kroah-Hartman:
 "Here are 10 more USB patches for 3.6-rc3.  They all fix reported
  problems (build problems for one of them, and easily repeatable oopses
  for the others.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  gpu/mfd/usb: Fix USB randconfig problems
  USB: CDC ACM: Fix NULL pointer dereference
  USB: emi62: remove __devinit* from the struct usb_device_id table
  USB: winbond: remove __devinit* from the struct usb_device_id table
  USB: vt6656: remove __devinit* from the struct usb_device_id table
  USB: rtl8187: remove __devinit* from the struct usb_device_id table
  USB: p54usb: remove __devinit* from the struct usb_device_id table
  USB: spca506: remove __devinit* from the struct usb_device_id table
  USB: jl2005bcd: remove __devinit* from the struct usb_device_id table
  USB: smsusb: remove __devinit* from the struct usb_device_id table

Pull one more driver core fix from Greg Kroah-Hartman:
 "Here is one fix for the dmesg line corruption problem that the
  previous set of patches caused.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  dyndbg: fix for SOH in logging messages

Pull x86 platform driver update from Matthew Garrett:
 "Some small updates for a few drivers, and some hardware enablement for
  new Ideapads and the gmux hardware in the latest Macs.

  This code won't run on older devices and has been well tested on new
  ones, so low risk of regressions."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  ideapad: add Lenovo IdeaPad Z570 support (part 3)
  ideapad: add Lenovo IdeaPad Z570 support (part 2)
  ideapad: add Lenovo IdeaPad Z570 support (part 1)
  classmate-laptop: always call input_sync() after input_report_switch()
  thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR
  dell-laptop: Fixed typo in touchpad LED quirk
  vga_switcheroo: Don't require handler init callback
  vga_switcheroo: Remove assumptions about registration/unregistration ordering
  apple-gmux: Add display mux support
  apple-gmux: Fix kconfig dependencies
  asus-wmi: record wlan status while controlled by userapp
  apple_gmux: Fix ACPI video unregister
  apple_gmux: Add support for newer hardware
  gmux: Add generic write32 function

Pull a hwmon fix from Guenter Roeck:
 "One patch with section conflict fixes."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  sections: Fix section conflicts in drivers/hwmon

Pull spi fixes from Mark Brown:
 "Grant is still away so another pull request with some fairly minor
  fixes, the most notable of which are several fixes for some common
  error patterns with the reference counting spi_master_get/put do."

* tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions
  spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove function
  spi/pl022: fix spi-pl022 pm enable at probe
  spi/bcm63xx: Ensure that memory is freed only after it is no longer used
  spi: omap2-mcspi: Fix the error handling in probe
  spi/s3c64xx: Add missing static storage class specifiers

commit 7c5763b8 (drivers:misc: Remove MISC_DEVICES config option) removed
CONFIG_MISC_DEVICES option, so remove the occurrences from the config files
as well.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Pull regulator fixes from Mark Brown:
 "A bunch of fixes which are a combination of minor fixes that have been
  shaken down due to greater testing exposure, the biggest block of
  which are for the Palmas driver which hadn't had all the changes
  required for mainline properly tested when it was merged."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl-regulator: fix up VINTANA1/VINTANA2
  regulator: core: request only valid gpio pins for regulator enable
  regulator: twl: Remove references to the twl4030 regulator
  regulator: gpio-regulator: Split setting of voltages and currents
  regulator: ab3100: add missing voltage table
  regulator: anatop: Fix wrong mask used in anatop_get_voltage_sel
  regulator: tps6586x: correct vin pin for sm0/sm1/sm2
  regulator: palmas: Fix palmas_probe error handling
  regulator: palmas: Call palmas_ldo_[read|write] in palmas_ldo_init
  regulator: palmas: Fix regmap offsets for PALMAS_REG_SMPS10 vsel_reg
  regulator: palmas: Fix calculating selector in palmas_map_voltage_ldo

Pull IOMMU fixes from Joerg Roedel:
 "Two fixes are necessary.  One patch fixes a boot crash on MacBook Air
  with interrupt remapping enabled and the other patch fixes a
  regression (which causes a boot crash on AMD IOMMUv2 systems too) in
  the init code of the AMD IOMMU driver."

* tag 'iommu-fixes-v3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix wrong check for ARRAY_SIZE()
  irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU

When the codec turn-on operation is canceled by the immediate
power-on, the driver left the power_transition flag as is.
This caused the persistent avoidance of power-save behavior.

Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Additional updates for 3.6

A batch more bugfixes, all driver-specific and fairly small and
unremarkable in a global context.  The biggest batch are for the newly
added Arizona drivers.

Fix config warning:

warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies
(USB_SUPPORT && USB_ARCH_HAS_HCD)

and build error:
ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined!

by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C
drivers/i2c/Kconfig:5:  symbol I2C is selected by FB_DDC
drivers/video/Kconfig:86:       symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/Kconfig:385:      symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/Kconfig:373:      symbol FB_CYBER2000 depends on FB

which is due to drivers/usb/Kconfig:
config USB_ARCH_HAS_OHCI
	...
	default y if ARCH_PNX4008 && I2C

Fix by dropping I2C from the above dependency; logic is that this is not a
platform dependency but a configuration dependency: the _architecture_ still
supports USB even is I2C is not selected.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB
drivers/mfd/Kconfig:396:        symbol MFD_TC6393XB depends on GPIOLIB
drivers/gpio/Kconfig:35:        symbol GPIOLIB is selected by FB_VIA
drivers/video/Kconfig:1560:     symbol FB_VIA depends on FB

which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on
it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 fixes from Ingo Molnar.

A x32 socket ABI fix with a -stable backport tag among other fixes.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x32: Use compat shims for {g,s}etsockopt
  Revert "x86-64/efi: Use EFI to deal with platform wall clock"
  x86, apic: fix broken legacy interrupts in the logical apic mode
  x86, build: Globally set -fno-pic
  x86, avx: don't use avx instructions with "noxsave" boot param

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix migration thread runtime bogosity
  sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
  sched,cgroup: Fix up task_groups list
  sched: fix divide by zero at {thread_group,task}_times
  sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies

Pull x86 perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: disable PEBS on a guest entry.
  perf/x86: Add Intel Westmere-EX uncore support
  perf/x86: Fixes for Nehalem-EX uncore driver
  perf, x86: Fix uncore_types_exit section mismatch

Pull a mutex fix from Ingo Molnar.

Fix the fastpath_lock failure contention flag for xchg-based mutexes.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Place lock in contended state after fastpath_lock failure

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>

This is the part 3 for fan control
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>

This is part 2 for touchpad toggle
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>

This is part 1 for special button handling.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

This is a series of fixes for CA0132, especially the missing SPDIF I/O
and the mixer build errors.

It's possible that these amps are settable somehow, e g through
secret codec verbs, but for now, don't create the controls (as
they won't be working anyway, and cause errors in amixer).

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1038651Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Initialize ret before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Initialize rc before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Initialize err before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the first case, the second test of whether retval is negative is
redundant.  It is dropped and the previous and subsequent tests are
combined.

In the second case, add an initialization of retval on failure of ioremap.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Initialize retval before returning from a failed call to ioremap.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix kernel-doc warning in <sound/pcm.h> and add function name to make
the kernel-doc notation complete.

Warning(include/sound/pcm.h:1081): No description found for parameter 'substream'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>