- 01 Dec, 2014 19 commits
-
-
Sagi Grimberg authored
commit 3b726ae2 upstream. In this case the cm_id->context is the isert_np, and the cm_id->qp is NULL, so use that to distinct the cases. Since we don't expect any other events on this cm_id we can just return -1 for explicit termination of the cm_id by the cma layer. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Or Gerlitz authored
commit f57915cf upstream. This patch adds a max_send_sge=2 minimum in isert_conn_setup_qp() to ensure outgoing control PDU responses with tx_desc->num_sge=2 are able to function correctly. This addresses a bug with RDMA hardware using dev_attr.max_sge=3, that in the original code with the ConnectX-2 work-around would result in isert_conn->max_sge=1 being negotiated. Originally reported by Chris with ocrdma driver. Reported-by:
Chris Moore <Chris.Moore@emulex.com> Tested-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Kuninori Morimoto authored
commit 706c6621 upstream. R-Car sound doesn't support PAUSE. Remove SNDRV_PCM_INFO_PAUSE flags from snd_pcm_hardware info Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
commit c1b9b9b1 upstream. FSI doesn't support PAUSE. Remove SNDRV_PCM_INFO_PAUSE flags from snd_pcm_hardware info Signed-off-by:
-
Bart Van Assche authored
commit ab477c1f upstream. It is not guaranteed to that srp_sq_size is supported by the HCA. So if we failed to create the QP with ENOMEM, try with a smaller srp_sq_size. Keep it up until we hit MIN_SRPT_SQ_SIZE, then fail the connection. Reported-by:
Mark Lehrer <lehrer@gmail.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Nicholas Bellinger authored
commit ab8edab1 upstream. This patch addresses a bug where individual vhost-scsi configfs endpoint groups can be removed from below while active exports to QEMU userspace still exist, resulting in an OOPs. It adds a configfs_depend_item() in vhost_scsi_set_endpoint() to obtain an explicit dependency on se_tpg->tpg_group in order to prevent individual vhost-scsi WWPN endpoints from being released via normal configfs methods while an QEMU ioctl reference still exists. Also, add matching configfs_undepend_item() in vhost_scsi_clear_endpoint() to release the dependency, once QEMU's reference to the individual group at /sys/kernel/config/target/vhost/$WWPN/$TPGT is released. (Fix up vhost_scsi_clear_endpoint() error path - DanC) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Roland Dreier authored
commit 885e7b0e upstream. If an initiator sends a zero-length command (e.g. TEST UNIT READY) but sets the transfer direction in the transport layer to indicate a data-out phase, we still shouldn't try to transfer data. At best it's a NOP, and depending on the transport, we might crash on an uninitialized sg list. Reported-by:
Craig Watson <craig.watson@vanguard-rugged.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Or Gerlitz authored
commit f4a1edd5 upstream. Currenly we only support Large-Send and TX checksum offloads for encapsulated traffic of type VXLAN. We must make sure to advertize these offloads up to the stack only when VXLAN tunnel is set. Failing to do so, would mislead the the networking stack to assume that the driver can offload the internal TX checksum for GRE packets and other buggy schemes. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Or Gerlitz authored
commit 9737c6ab upstream. This is currently missing, which results in a crash when one attempts to set VXLAN tunnel over the mlx4_en when acting as PF. [ 2408.785472] BUG: unable to handle kernel NULL pointer dereference at (null) [...] [ 2408.994104] Call Trace: [ 2408.996584] [<ffffffffa021f7f5>] ? vxlan_get_rx_port+0xd6/0x103 [vxlan] [ 2409.003316] [<ffffffffa021f71f>] ? vxlan_lowerdev_event+0xf2/0xf2 [vxlan] [ 2409.010225] [<ffffffffa0630358>] mlx4_en_start_port+0x862/0x96a [mlx4_en] [ 2409.017132] [<ffffffffa063070f>] mlx4_en_open+0x17f/0x1b8 [mlx4_en] While here, make sure to invoke vxlan_get_rx_port() only when VXLAN offloads are actually enabled and not when they are only supported. Reported-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Jiri Bohac authored
commit 01462405 upstream. This fixes an old regression introduced by commit b0d0d915 (ipx: remove the BKL). When a recvmsg syscall blocks waiting for new data, no data can be sent on the same socket with sendmsg because ipx_recvmsg() sleeps with the socket locked. This breaks mars-nwe (NetWare emulator): - the ncpserv process reads the request using recvmsg - ncpserv forks and spawns nwconn - ncpserv calls a (blocking) recvmsg and waits for new requests - nwconn deadlocks in sendmsg on the same socket Commit b0d0d915 has simply replaced BKL locking with lock_sock/release_sock. Unlike now, BKL got unlocked while sleeping, so a blocking recvmsg did not block a concurrent sendmsg. Only keep the socket locked while actually working with the socket data and release it prior to calling skb_recv_datagram(). Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mathias Krause authored
commit a5f6fc28 upstream. pptp_getname() only partially initializes the stack variable sa, particularly only fills the pptp part of the sa_addr union. The code thereby discloses 16 bytes of kernel stack memory via getsockname(). Fix this by memset(0)'ing the union before. Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit b8e4500f upstream. Since commit 6fde8f03 ("bonding: fix locking in bond_loadbalance_arp_mon()") we can have a stale bond carrier state and stale curr_active_slave when using arp monitoring in loadbalance modes. The reason is that in bond_loadbalance_arp_mon() we can't have do_failover == true but slave_state_changed == false, whenever do_failover is true then slave_state_changed is also true. Then the following piece from bond_loadbalance_arp_mon(): if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) bond_update_slave_arr(bond, NULL); } else if (do_failover) { block_netpoll_tx(); bond_select_active_slave(bond); unblock_netpoll_tx(); } will execute only the first branch, always and regardless of do_failover. Since these two events aren't related in such way, we need to decouple and consider them separately. For example this issue could lead to the following result: Bonding Mode: load balancing (round-robin) *MII Status: down* MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 100 ARP IP target/s (n.n.n.n form): 192.168.9.2 Slave Interface: ens12 *MII Status: up* Speed: 10000 Mbps Duplex: full Link Failure Count: 2 Permanent HW addr: 00:0f:53:01:42:2c Slave queue ID: 0 Slave Interface: eth1 *MII Status: up* Speed: Unknown Duplex: Unknown Link Failure Count: 70 Permanent HW addr: 52:54:00:2f:0f:8e Slave queue ID: 0 Since some interfaces are up, then the status of the bond should also be up, but it will never change unless something invokes bond_set_carrier() (i.e. enslave, bond_select_active_slave etc). Now, if I force the calling of bond_select_active_slave via for example changing primary_reselect (it can change in any mode), then the MII status goes to "up" because it calls bond_select_active_slave() which should've been done from bond_loadbalance_arp_mon() itself. CC: Veaceslav Falico <vfalico@gmail.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> Fixes: 6fde8f03 ("bonding: fix locking in bond_loadbalance_arp_mon()") Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Acked-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Martin Hauke authored
commit bb2bdeb8 upstream. Added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by:
Martin Hauke <mardnh@gmx.de> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Alexey Khoroshilov authored
commit 8c2dd544 upstream. In case of any failure ieee802154fake_probe() just calls unregister_netdev(). But it does not look safe to unregister netdevice before it was registered. The patch implements straightforward resource deallocation in case of failure in ieee802154fake_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Panu Matilainen authored
commit 49dd18ba upstream. Trying to add an unreachable route incorrectly returns -ESRCH if if custom FIB rules are present: [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: Network is unreachable [root@localhost ~]# ip rule add to 55.66.77.88 table 200 [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: No such process [root@localhost ~]# Commit 83886b6b ("[NET]: Change "not found" return value for rule lookup") changed fib_rules_lookup() to use -ESRCH as a "not found" code internally, but for user space it should be translated into -ENETUNREACH. Handle the translation centrally in ipv4-specific fib_lookup(), leaving the DECnet case alone. On a related note, commit b7a71b51 ("ipv4: removed redundant conditional") removed a similar translation from ip_route_input_slow() prematurely AIUI. Fixes: b7a71b51 ("ipv4: removed redundant conditional") Signed-off-by:
Panu Matilainen <pmatilai@redhat.com> Signed-off-by:
-
Vincent BENAYOUN authored
commit 84bc8868 upstream. There could be a signed overflow in the following code. The expression, (32-logmask) is comprised between 0 and 31 included. It may be equal to 31. In such a case the left shift will produce a signed integer overflow. According to the C99 Standard, this is an undefined behavior. A simple fix is to replace the signed int 1 with the unsigned int 1U. Signed-off-by:
Vincent BENAYOUN <vincent.benayoun@trust-in-soft.com> Signed-off-by:
-
David S. Miller authored
commit 5a2b59d3 upstream. We are reading the memory location, so we have to have a memory constraint in there purely for the sake of showing the data flow to the compiler. Reported-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Paolo Bonzini authored
commit c1118b36 upstream. On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA. In that case, KVM will fail to patch VMCALL instructions to VMMCALL as required on AMD processors. The failure mode is currently a divide-by-zero exception, which obviously is a KVM bug that has to be fixed. However, picking the right instruction between VMCALL and VMMCALL will be faster and will help if you cannot upgrade the hypervisor. Reported-by:
Chris Webb <chris@arachsys.com> Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Chris J Arges <chris.j.arges@canonical.com> [ luis: used Chris backport to 3.16 ] Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 27 Nov, 2014 21 commits
-
-
Pali Rohár authored
commit a666b6ff upstream. Without this patch, dell-wmi is trying to access elements of dynamically allocated array without checking the array size. This can lead to memory corruption or a kernel panic. This patch adds the missing checks for array size. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Andrey Vagin authored
commit 1195d94e upstream. proc_dointvec_minmax() returns zero if a new value has been set. So we don't need to check all charecters have been handled. Below you can find two examples. In the new value has not been handled properly. $ strace ./a.out open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3 write(3, "0\n\0", 3) = 2 close(3) = 0 exit_group(0) $ cat /sys/kernel/debug/tracing/trace $strace ./a.out open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3 write(3, "0\n", 2) = 2 close(3) = 0 $ cat /sys/kernel/debug/tracing/trace a.out-697 [000] .... 3280.998235: unregister_ipcns_notifier <-proc_ipcauto_dointvec_minmax Fixes: 9eefe520 ("ipc: do not use a negative value to re-enable msgmni automatic recomputin") Signed-off-by:
Andrey Vagin <avagin@openvz.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Joe Perches <joe@perches.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Roger Quadros authored
commit a8ead0ec upstream. The 5th NAND partition should be named "NAND.u-boot-spl-os" instead of "NAND.u-boot-spl". This is to be consistent with other TI boards as well as u-boot. Fixes: 91994fac ("ARM: dts: am335x-evm: NAND: update MTD partition table") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andy Lutomirski authored
commit 81f49a8f upstream. is_compat_task() is the wrong check for audit arch; the check should be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not AUDIT_ARCH_I386. CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has no visible effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Pranith Kumar authored
commit 2aa792e6 upstream. The rcu_gp_kthread_wake() function checks for three conditions before waking up grace period kthreads: * Is the thread we are trying to wake up the current thread? * Are the gp_flags zero? (all threads wait on non-zero gp_flags condition) * Is there no thread created for this flavour, hence nothing to wake up? If any one of these condition is true, we do not call wake_up(). It was found that there are quite a few avoidable wake ups both during idle time and under stress induced by rcutorture. Idle: Total:66000, unnecessary:66000, case1:61827, case2:66000, case3:0 Total:68000, unnecessary:68000, case1:63696, case2:68000, case3:0 rcutorture: Total:254000, unnecessary:254000, case1:199913, case2:254000, case3:0 Total:256000, unnecessary:256000, case1:201784, case2:256000, case3:0 Here case{1-3} are the cases listed above. We can avoid these wake ups by using rcu_gp_kthread_wake() to conditionally wake up the grace period kthreads. There is a comment about an implied barrier supplied by the wake_up() logic. This barrier is necessary for the awakened thread to see the updated ->gp_flags. This flag is always being updated with the root node lock held. Also, the awakened thread tries to acquire the root node lock before reading ->gp_flags because of which there is proper ordering. Hence this commit tries to avoid calling wake_up() whenever we can by using rcu_gp_kthread_wake() function. Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Pablo Neira authored
commit e10038a8 upstream. This structure is not exposed to userspace, so fix this by defining struct sk_filter; so we skip the casting in kernelspace. This is safe since userspace has no way to lurk with that internal pointer. Fixes: e6f30c73 ("netfilter: x_tables: add xt_bpf match") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Devesh Sharma authored
commit 8b0f93d9 upstream. During create-ah from userspace, uverbs is sending garbage data in attr.dmac and attr.vlan_id. This patch sets attr.dmac and attr.vlan_id to zero. Fixes: dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by:
Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 96a2adbc upstream. kernel/time/jiffies.c provides a default clocksource_default_clock() definition explicitly marked "weak". arch/s390 provides its own definition intended to override the default, but the "weak" attribute on the declaration applied to the s390 definition as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the clocksource_default_clock() declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: f1b82746 ("clocksource: Cleanup clocksource selection") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Ingo Molnar <mingo@kernel.org> CC: Daniel Lezcano <daniel.lezcano@linaro.org> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 107bcc6d upstream. kernel/debug/debug_core.c provides a default kgdb_arch_pc() definition explicitly marked "weak". Several architectures provide their own definitions intended to override the default, but the "weak" attribute on the declaration applied to the arch definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: 688b744d ("kgdb: fix signedness mixmatches, add statics, add declaration to header") Tested-by: Vineet Gupta <vgupta@synopsys.com> # for ARC build Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 5ab03ac5 upstream. For the following functions: elfcorehdr_alloc() elfcorehdr_free() elfcorehdr_read() elfcorehdr_read_notes() remap_oldmem_pfn_range() fs/proc/vmcore.c provides default definitions explicitly marked "weak". arch/s390 provides its own definitions intended to override the default ones, but the "weak" attribute on the declarations applied to the s390 definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declarations so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: be8a8d06 ("vmcore: introduce ELF header in new memory feature") Fixes: 9cb21813 ("vmcore: introduce remap_oldmem_pfn_range()") Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> CC: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Bjorn Helgaas authored
commit e0a8400c upstream. drivers/base/memory.c provides a default memory_block_size_bytes() definition explicitly marked "weak". Several architectures provide their own definitions intended to override the default, but the "weak" attribute on the declaration applied to the arch definitions as well, so the linker chose one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: 41f10726 ("drivers: base: Add prototype declaration to the header file") Signed-off-by:
-
Roger Quadros authored
commit 73b3a665 upstream. For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the PULL_DIS bit which disables the PULLs. PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't use it in the PIN_OUTPUT_PULLUP/DOWN macros. Fixes: 23d9cec0 ("pinctrl: dra: dt-bindings: Fix pull enable/disable") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Junjie Mao authored
commit 805dbe17 upstream. The driver is not released when ieee80211_register_hw fails in mac80211_hwsim_create_radio, leading to the access to the unregistered (and possibly freed) device in platform_driver_unregister: [ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.448292] ------------[ cut here ]------------ [ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50() [ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2 [ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000 [ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001 [ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c [ 0.454632] Call Trace: [ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20 [ 0.457748] [<79170bb3>] kobject_get+0x33/0x50 [ 0.458274] [<7925824f>] get_device+0xf/0x20 [ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0 [ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.469829] ---[ end trace ad8ac403ff8aef5c ]--- [ 0.470509] ------------[ cut here ]------------ [ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00() [ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS) [ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc [ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000 [ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a [ 0.477523] Call Trace: [ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30 [ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0 [ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.480479] ---[ end trace ad8ac403ff8aef5d ]--- [ 0.495478] BUG: unable to handle kernel paging request at 00200200 [ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 [ 0.496923] *pde = 00000000 [ 0.497290] Oops: 0002 [#1] [ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000 [ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0 [ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0 [ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70 [ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54 [ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690 [ 0.503773] Stack: [ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460 [ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8 [ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80 [ 0.505451] Call Trace: [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0 [ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54 [ 0.505451] CR2: 0000000000200200 [ 0.505451] ---[ end trace ad8ac403ff8aef5e ]--- [ 0.505451] Kernel panic - not syncing: Fatal exception Fixes: 9ea92774 ("mac80211_hwsim: Register and bind to driver") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 9ef91514 upstream. When an AUDIT_GET_FEATURE message is sent from userspace to the kernel, it should reply with a message tagged as an AUDIT_GET_FEATURE type with a struct audit_feature. The current reply is a message tagged as an AUDIT_GET type with a struct audit_feature. This appears to have been a cut-and-paste-eo in commit b0fed402. Reported-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Cristian Stoica authored
commit 307fd543 upstream. Replace equivalent (and partially incorrect) scatter-gather functions with ones from crypto-API. The replacement is motivated by page-faults in sg_copy_part triggered by successive calls to crypto_hash_update. The following fault appears after calling crypto_ahash_update twice, first with 13 and then with 285 bytes: Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xf9bf9a8c Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: tcrypt(+) caamhash caam_jr caam tls CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted 3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75 task: e9308530 ti: e700e000 task.ti: e700e000 NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0 REGS: e700fb80 TRAP: 0300 Not tainted (3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2) MSR: 00029002 <CE,EE,ME> CR: 44f92024 XER: 20000000 DEAR: 00000008, ESR: 00000000 GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888 GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154 GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48 GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000 NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash] LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] Call Trace: [e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable) [e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] [e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls] [e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls] [e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70 [e700fe40] [c02259f0] alg_test_aead+0x50/0xc0 [e700fe60] [c02241e4] alg_test+0x114/0x2e0 [e700fee0] [c022276c] cryptomgr_test+0x4c/0x60 [e700fef0] [c004f658] kthread+0x98/0xa0 [e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64 Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Pawel Moll authored
commit b3f20785 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.comSigned-off-by:
-
Derek Browne authored
commit 43e968ce upstream. This patch is to enable SDIO host controller for Intel Quark X1000. Signed-off-by:
Derek Browne <Derek.Browne@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Frank Schaefer authored
commit 627530c3 upstream. When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Stephan Mueller authored
commit 725c7f61 upstream. The Yoga 3 does not contain any physical rfkill switch. Therefore disable the rfkill switch identically to the Yoga 2 approach. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Nadav Amit authored
commit a2b9e6c1 upstream. Commit fc3a9157 ("KVM: X86: Don't report L2 emulation failures to user-space") disabled the reporting of L2 (nested guest) emulation failures to userspace due to race-condition between a vmexit and the instruction emulator. The same rational applies also to userspace applications that are permitted by the guest OS to access MMIO area or perform PIO. This patch extends the current behavior - of injecting a #UD instead of reporting it to userspace - also for guest userspace code. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Alex Deucher authored
commit 83d04c39 upstream. Fixes kfree of the sadb buffer when it's NULL. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
