In commit 682cd3cf
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.

To fix this issue, we also apply this new MTU value for node level.

Fixes: 682cd3cf ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The CNIC kconfig symbol selects UIO and UIO depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to CNIC.

Quietens this kconfig warning:

WARNING: unmet direct dependencies detected for UIO
  Depends on [n]: MMU [=n]
  Selected by [m]:
  - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)

Fixes: adfc5217 ("broadcom: Move the Broadcom drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Thomas Falcon says:

====================
ibmvnic: Bug fixes for queue descriptor processing

This series resolves a few issues in the ibmvnic driver's
RX buffer and TX completion processing. The first patch
includes memory barriers to synchronize queue descriptor
reads. The second patch fixes a memory leak that could
occur if the device returns a TX completion with an error
code in the descriptor, in which case the respective socket
buffer and other relevant data structures may not be freed
or updated properly.

v3: Correct length of Fixes tags, requested by Jakub Kicinski

v2: Provide more detailed comments explaining specifically what
    reads are being ordered, suggested by Michael Ellerman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-30

The first patch is by me an target the tcan4x5x bindings for the m_can driver.
It fixes the error path in the tcan4x5x_can_probe() function.

The next two patches are by Jeroen Hofstee and makes the lost of arbitration
error counters of sja1000 and the sun4i drivers consistent with the other
drivers.

Zhang Qilong contributes two patch that clean up the error path in the c_can
and kvaser_pciefd drivers.

* tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
  can: c_can: c_can_power_up(): fix error handling
  can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
  can: sja1000: sja1000_err(): don't count arbitration lose as an error
  can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
====================

Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:

  min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
  		+ VXLAN_HLEN + iphdr_len;

But the vxlan_config_apply only requested needed headroom for:

  lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM

So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.

Cc: Annika Wickert <annika.wickert@exaring.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Annika Wickert <aw@awlnx.space>
Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

there is kernel panic in inet_twsk_free() while chtls
module unload when socket is in TIME_WAIT state because
sk_prot_creator was not preserved on connection socket.

Fixes: cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: Udai Sharma <udai.sharma@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid
reference leak.

Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201128133922.3276973-3-zhangqilong3@huawei.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In the error handling in c_can_power_up(), there are two bugs:

1) c_can_pm_runtime_get_sync() will increase usage counter if device is not
   empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a
   reference leak here.

2) c_can_reset_ram() operation will set start bit when enable is true. We
   should clear it in the error handling.

We fix it by adding c_can_pm_runtime_put_sync() for 1), and
c_can_reset_ram(enable is false) for 2) in the error handling.

Fixes: 82120032 ("can: c_can: Add d_can suspend resume support")
Fixes: 52cde85a ("can: c_can: Add d_can raminit support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201128133922.3276973-2-zhangqilong3@huawei.com
[mkl: return "0" instead of "ret"]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sun4i driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.

Fixes: 0738eff1 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sja1000 driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.

Fixes: 8935f57e ("can: sja1000: fix network statistics update")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call
during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on
them.

Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Fixes: a1a8b459 ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b32922 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Dany Madden says:

====================
ibmvnic: assorted bug fixes

Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic:
assorted bug fixes" sent by Lijun Pan.
====================

Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce the wait time for Command Response Queue response from 30 seconds
to 20 seconds, as recommended by VIOS and Power Hypervisor teams.

Fixes: bd0b6723 ("ibmvnic: Move login and queue negotiation into ibmvnic_open")
Fixes: 53da09e9 ("ibmvnic: Add set_link_state routine for setting adapter link state")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reset timeout is going off right after adapter reset. This patch ensures
that timeout is scheduled if it has been 5 seconds since the last reset.
5 seconds is the default watchdog timeout.

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

send_login() does not check for the result of ibmvnic_send_crq() of the
login request. This results in the driver needlessly retrying the login
10 times even when CRQ is no longer active. Check the return code and
give up in case of errors in sending the CRQ.

The only time we want to retry is if we get a PARITALSUCCESS response
from the partner.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that
the worker thread will start reset process and free the login response
buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will
then try to access the login response buffer and crash.

Have ibmvnic track pending logins and discard any stale login responses.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.

Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.

Fixes: b27507bb ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.

Fixes: c8b2ad0a ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.

Remove the no longer need free_all_rwi().

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
   by syzbot.

2) Remove spurious reports on nf_tables when lockdep gets disabled,
   from Florian Westphal.

3) Fix memleak in the error path of error path of
   ip_vs_control_net_init(), from Wang Hai.

4) Fix missing control data in flow dissector, otherwise IP address
   matching in hardware offload infra does not work.

5) Fix hardware offload match on prefix IP address when userspace
   does not send a bitwise expression to represent the prefix.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables_offload: build mask based from the matching bytes
  netfilter: nftables_offload: set address type in control dissector
  ipvs: fix possible memory leak in ip_vs_control_net_init
  netfilter: nf_tables: avoid false-postive lockdep splat
  netfilter: ipset: prevent uninit-value in hash_ip6_add
====================

Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

a proper kernel configuration for running kselftest can be obtained with:

 $ yes | make kselftest-merge

enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-11-28

1) Do not reference the skb for xsk's generic TX side since when looped
   back into RX it might crash in generic XDP, from Björn Töpel.

2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
   from Magnus Karlsson.

3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
   from Marek Majtyka.

4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
   from Zhen Lei.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add MAINTAINERS entry for BPF LSM
  bpftool: Fix error return value in build_btf_type_table
  net, xsk: Avoid taking multiple skbuff references
  xsk: Fix incorrect netdev reference count
  xsk: Fix umem cleanup bug at socket destruct
  MAINTAINERS: Update XDP and AF_XDP entries
====================

Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)

* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
  batman-adv: Don't always reallocate the fragmentation skb head
  batman-adv: Reserve needed_*room for fragments
  batman-adv: Consider fragmentation for needed_headroom
====================

Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:

For hook NF_INET_PRE_ROUTING:
  setup_pre_routing / br_nf_pre_routing_finish

For hook NF_INET_FORWARD:
  br_nf_forward_ip / br_nf_forward_finish

But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:

  /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
   * about the value of skb->pkt_type. */

But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:

  br_nf_pre_routing
  br_nf_pre_routing_ipv6
     br_nf_pre_routing_finish
  br_nf_forward_ip
     br_nf_forward_finish
  br_nf_post_routing           <- pkt_type is updated to PACKET_HOST
     br_nf_dev_queue_xmit      <- but not reverted to its original value
  vxlan_xmit
     vxlan_xmit_one
        skb_tunnel_check_pmtu  <- a check on pkt_type is performed

In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).

If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
  and CAN subtrees.

  Current release - regressions:

   - gro_cells: reduce number of synchronize_net() calls

   - ch_ktls: release a lock before jumping to an error path

  Current release - always broken:

   - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header

  Previous release - regressions:

   - net/tls: fix missing received data after fast remote close

   - vsock/virtio: discard packets only when socket is really closed

   - sock: set sk_err to ee_errno on dequeue from errq

   - cxgb4: fix the panic caused by non smac rewrite

  Previous release - always broken:

   - tcp: fix corner cases around setting ECN with BPF selection of
     congestion control

   - tcp: fix race condition when creating child sockets from syncookies
     on loopback interface

   - usbnet: ipheth: fix connectivity with iOS 14

   - tun: honor IOCB_NOWAIT flag

   - net/packet: fix packet receive on L3 devices without visible hard
     header

   - devlink: Make sure devlink instance and port are in same net
     namespace

   - net: openvswitch: fix TTL decrement action netlink message format

   - bonding: wait for sysfs kobject destruction before freeing struct
     slave

   - net: stmmac: fix upstream patch applied to the wrong context

   - bnxt_en: fix return value and unwind in probe error paths

  Misc:

   - devlink: add extra layer of categorization to the reload stats uAPI
     before it's released"

* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
  ch_ktls: lock is not freed
  net/tls: Protect from calling tls_dev_del for TLS RX twice
  devlink: Make sure devlink instance and port are in same net namespace
  devlink: Hold rtnl lock while reading netdev attributes
  ptp: clockmatrix: bug fix for idtcm_strverscmp
  enetc: Let the hardware auto-advance the taprio base-time of 0
  gro_cells: reduce number of synchronize_net() calls
  net: stmmac: fix incorrect merge of patch upstream
  ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
  Documentation: netdev-FAQ: suggest how to post co-dependent series
  ibmvnic: enhance resetting status check during module exit
  ...

Pull SCSI fixes from James Bottomley:
 "Three small fixes in the UFS driver: two are for power management
  issues and the third is to fix a slew of problem in the sysfs code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Fix race between shutdown and runtime resume flow
  scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
  scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()

Pull io_uring fixes from Jens Axboe:

 - Out of bounds fix for the cq size cap from earlier this release (Joseph)

 - iov_iter type check fix (Pavel)

 - Files grab + cancelation fix (Pavel)

* tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  io_uring: fix files grab/cancel race
  io_uring: fix ITER_BVEC check
  io_uring: fix shift-out-of-bounds when round up cq size

Pull block fix from Jens Axboe:
 "Just a single fix, for a crash in the keyslot manager"

* tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
  block/keyslot-manager: prevent crash when num_slots=1

Pull btrfs fixes from David Sterba:
 "A few fixes for various warnings that accumulated over past two weeks:

   - tree-checker: add missing return values for some errors

   - lockdep fixes
      - when reading qgroup config and starting quota rescan
      - reverse order of quota ioctl lock and VFS freeze lock

   - avoid accessing potentially stale fs info during device scan,
     reported by syzbot

   - add scope NOFS protection around qgroup relation changes

   - check for running transaction before flushing qgroups

   - fix tracking of new delalloc ranges for some cases"

* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix lockdep splat when enabling and disabling qgroups
  btrfs: do nofs allocations when adding and removing qgroup relations
  btrfs: fix lockdep splat when reading qgroup config on mount
  btrfs: tree-checker: add missing returns after data_ref alignment checks
  btrfs: don't access possibly stale fs_info data for printing duplicate device
  btrfs: tree-checker: add missing return after error in root_item
  btrfs: qgroup: don't commit transaction when we already hold the handle
  btrfs: fix missing delalloc new bit for new delalloc ranges

Pull rdma fixes from Jason Gunthorpe:
 "Two security issues and several small bug fixes. Things seem to have
  stabilized for this release here.

  Summary:

   - Significant out of bounds access security issue in i40iw

   - Fix misuse of mmu notifiers in hfi1

   - Several errors in the register map/usage in hns

   - Missing error returns in mthca"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for memory window mtpt configuration
  RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
  RDMA/hns: Fix wrong field of SRQ number the device supports
  IB/hfi1: Ensure correct mm is used at all times
  RDMA/i40iw: Address an mmap handler exploit in i40iw
  IB/mthca: fix return value of error branch in mthca_init_cq()

Pull mtd fixes from Miquel Raynal:
 "Because of a recent change in the core, NAND controller drivers
  initializing the ECC engine too early in the probe path are broken.

  Drivers should wait for the NAND device to be discovered and its
  memory layout known before doing any ECC related initialization, so
  instead of reverting the faulty change which is actually moving in the
  right direction, let's fix the drivers directly: socrates, sharpsl,
  r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
  lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
  xway and gpio"

* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
  mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()