- 18 Sep, 2014 32 commits
-
-
Paolo Bonzini authored
commit 0f6c0a74 upstream. Currently, the EOI exit bitmap (used for APICv) does not include interrupts that are masked. However, this can cause a bug that manifests as an interrupt storm inside the guest. Alex Williamson reported the bug and is the one who really debugged this; I only wrote the patch. :) The scenario involves a multi-function PCI device with OHCI and EHCI USB functions and an audio function, all assigned to the guest, where both USB functions use legacy INTx interrupts. As soon as the guest boots, interrupts for these devices turn into an interrupt storm in the guest; the host does not see the interrupt storm. Basically the EOI path does not work, and the guest continues to see the interrupt over and over, even after it attempts to mask it at the APIC. The bug is only visible with older kernels (RHEL6.5, based on 2.6.32 with not many changes in the area of APIC/IOAPIC handling). Alex then tried forcing bit 59 (corresponding to the USB functions' IRQ) on in the eoi_exit_bitmap and TMR, and things then work. What happens is that VFIO asserts IRQ11, then KVM recomputes the EOI exit bitmap. It does not have set bit 59 because the RTE was masked, so the IOAPIC never sees the EOI and the interrupt continues to fire in the guest. My guess was that the guest is masking the interrupt in the redirection table in the interrupt routine, i.e. while the interrupt is set in a LAPIC's ISR, The simplest fix is to ignore the masking state, we would rather have an unnecessary exit rather than a missed IRQ ACK and anyway IOAPIC interrupts are not as performance-sensitive as for example MSIs. Alex tested this patch and it fixed his bug. [Thanks to Alex for his precise description of the problem and initial debugging effort. A lot of the text above is based on emails exchanged with him.] Reported-by:
Alex Williamson <alex.williamson@redhat.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Paul Burton authored
commit b1442d39 upstream. If one or more matching FCSR cause & enable bits are set in saved thread context then when that context is restored the kernel will take an FP exception. This is of course undesirable and considered an oops, leading to the kernel writing a backtrace to the console and potentially rebooting depending upon the configuration. Thus the kernel avoids this situation by clearing the cause bits of the FCSR register when handling FP exceptions and after emulating FP instructions. However the kernel does not prevent userland from setting arbitrary FCSR cause & enable bits via ptrace, using either the PTRACE_POKEUSR or PTRACE_SETFPREGS requests. This means userland can trivially cause the kernel to oops on any system with an FPU. Prevent this from happening by clearing the cause bits when writing to the saved FCSR context via ptrace. This problem appears to exist at least back to the beginning of the git era in the PTRACE_POKEUSR case. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7438/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
commit 8393c524 upstream. In commit 2c8c53e2 (MIPS: Optimize TLB handlers for Octeon CPUs) build_r4000_tlb_refill_handler() is modified. But it doesn't compatible with the original code in HUGETLB case. Because there is a copy & paste error and one line of code is missing. It is very easy to produce a bug with LTP's hugemmap05 test. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7496/Signed-off-by:
-
Hui Wang authored
commit 7440850c upstream. ON the machine, two pin complex (0xb and 0xe) are both routed to the same external right-side mic jack, this makes the jack can't work. To fix this problem, set the 0xe to "not connected". BugLink: https://bugs.launchpad.net/bugs/1350148Tested-by:
Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Axel Lin authored
commit 56de1377 upstream. Current code uses channel as array index, so the valid channel value is 0 .. ADS1015_CHANNELS - 1. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Janusz Dziemidowicz authored
commit 0213436a upstream. Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc294 ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by:
Janusz Dziemidowicz <rraptorr@nails.eu.org> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jarkko Sakkinen authored
commit 3e14d83e upstream. Regression in 41ab999c. Call to tpm_chip_put is missing. This will cause TPM device driver not to unload if tmp_get_random() is called. Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Jason Gunthorpe authored
commit f07a5e9a upstream. Most device drivers do call 'tpm_do_selftest' which executes a TPM_ContinueSelfTest. tpm_i2c_stm_st33 is just pointlessly different, I think it is bug. These days we have the general assumption that the TPM is usable by the kernel immediately after the driver is finished, so we can no longer defer the mandatory self test to userspace. Reported-by:
Richard Marciel <rmaciel@linux.vnet.ibm.com> Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Michael Welling authored
commit 46de8ff8 upstream. single-ulpi-bypass is a flag used for older OMAP3 silicon. The flag when set, can excite code that improperly uses the OMAP_UHH_HOSTCONFIG_UPLI_BYPASS define to clear the corresponding bit. Instead it clears all of the other bits disabling all of the ports in the process. Signed-off-by:
Michael Welling <mwelling@emacinc.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Thomas Petazzoni authored
commit e06871cd upstream. In commit f814f9ac ("spi/orion: add device tree binding"), Device Tree support was added to the spi-orion driver. However, this commit reads the "cell-index" property, without taking into account the fact that DT properties are big-endian encoded. Since most of the platforms using spi-orion with DT have apparently not used anything but cell-index = <0>, the problem was not visible. But as soon as one starts using cell-index = <1>, the problem becomes clearly visible, as the master->bus_num gets a wrong value (actually it gets the value 0, which conflicts with the first bus that has cell-index = <0>). This commit fixes that by using of_property_read_u32() to read the property value, which does the appropriate endianness conversion when needed. Fixes: f814f9ac ("spi/orion: add device tree binding") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Paul Mackerras authored
commit ef1af2e2 upstream. This does for PR KVM what c9438092 ("KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call") did for HV KVM, that is, eliminate a "suspicious rcu_dereference_check() usage!" warning by taking the SRCU lock around the call to kvmppc_rtas_hcall(). It also fixes a return of RESUME_HOST to return EMULATE_FAIL instead, since kvmppc_h_pr() is supposed to return EMULATE_* values. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Andy Lutomirski authored
commit 53b884ac upstream. This commit in Linux 3.6: commit c767a54b Author: Joe Perches <joe@perches.com> Date: Mon May 21 19:50:07 2012 -0700 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> caused warn_bad_vsyscall to output garbage in the middle of the line. Revert the bad part of it. The printk in question isn't actually bare; the level is "%s". The bug this fixes is purely cosmetic; backports are optional. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/03eac1f24110bbe496ecc12a4df467e0d88466d4.1406330947.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 3533f860 upstream. On some Windows hosts on FC SANs, TEST_UNIT_READY can return SRB_STATUS_ERROR. Correctly handle this. Note that there is sufficient sense information to support scsi error handling even in this case. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
K. Y. Srinivasan authored
commit f885fb73 upstream. Correctly set SRB flags for all valid I/O directions. Some IHV drivers on the Windows host require this. The host validates the command and SRB flags prior to passing the command down to native driver stack. Signed-off-by:
-
K. Y. Srinivasan authored
commit 56b26e69 upstream. On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by:
-
K. Y. Srinivasan authored
commit adb6f9e1 upstream. Based on the negotiated VMBUS protocol version, we adjust the size of the storage protocol messages. The two sizes we currently handle are pre-win8 and post-win8. In WS2012 R2, we are negotiating higher VMBUS protocol version than the win8 version. Make adjustments to correctly handle this. Signed-off-by:
-
K. Y. Srinivasan authored
commit 8caf92d8 upstream. Going forward it is possible that some of the commands that are not currently implemented will be implemented on future Windows hosts. Even if they are not implemented, we are told the host will corrrectly handle unsupported commands (by returning appropriate return code and sense information). Make command filtering depend on the host version. Signed-off-by:
-
K. Y. Srinivasan authored
commit 52f9614d upstream. Set cmd_per_lun to reflect value supported by the Host. Signed-off-by:
-
K. Y. Srinivasan authored
commit 4cd83ecd upstream. Hyper-V hosts can support multiple targets and multiple channels and larger number of LUNs per target. Update the code to reflect this. With this patch we can correctly enumerate all the paths in a multi-path storage environment. Signed-off-by:
-
Stephen M. Cameron authored
commit 0758f4f7 upstream. When copy_from_user fails, return -EFAULT, not -ENOMEM Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by:
Robert Elliott <elliott@hp.com> Reviewed-by:
Joe Handzik <joseph.t.handzik@hp.com> Reviewed-by:
Scott Teel <scott.teel@hp.com> Reviewed by: Mike MIller <michael.miller@canonical.com> Signed-off-by:
-
Ben Hutchings authored
commit 03a6c3ff upstream. bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Fixes: f16a1750 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by:
-
Martin K. Petersen authored
commit c1d40a52 upstream. Despite supporting modern SCSI features some storage devices continue to claim conformance to an older version of the SPC spec. This is done for compatibility with legacy operating systems. Linux by default will not attempt to read VPD pages on devices that claim SPC-2 or older. Introduce a blacklist flag that can be used to trigger VPD page inquiries on devices that are known to support them. Reported-by:
-
Eric Paris authored
commit 7d8b6c63 upstream. This is effectively a revert of 7b9a7ec5 plus fixing it a different way... We found, when trying to run an application from an application which had dropped privs that the kernel does security checks on undefined capability bits. This was ESPECIALLY difficult to debug as those undefined bits are hidden from /proc/$PID/status. Consider a root application which drops all capabilities from ALL 4 capability sets. We assume, since the application is going to set eff/perm/inh from an array that it will clear not only the defined caps less than CAP_LAST_CAP, but also the higher 28ish bits which are undefined future capabilities. The BSET gets cleared differently. Instead it is cleared one bit at a time. The problem here is that in security/commoncap.c::cap_task_prctl() we actually check the validity of a capability being read. So any task which attempts to 'read all things set in bset' followed by 'unset all things set in bset' will not even attempt to unset the undefined bits higher than CAP_LAST_CAP. So the 'parent' will look something like: CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 CapBnd: ffffffc000000000 All of this 'should' be fine. Given that these are undefined bits that aren't supposed to have anything to do with permissions. But they do... So lets now consider a task which cleared the eff/perm/inh completely and cleared all of the valid caps in the bset (but not the invalid caps it couldn't read out of the kernel). We know that this is exactly what the libcap-ng library does and what the go capabilities library does. They both leave you in that above situation if you try to clear all of you capapabilities from all 4 sets. If that root task calls execve() the child task will pick up all caps not blocked by the bset. The bset however does not block bits higher than CAP_LAST_CAP. So now the child task has bits in eff which are not in the parent. These are 'meaningless' undefined bits, but still bits which the parent doesn't have. The problem is now in cred_cap_issubset() (or any operation which does a subset test) as the child, while a subset for valid cap bits, is not a subset for invalid cap bits! So now we set durring commit creds that the child is not dumpable. Given it is 'more priv' than its parent. It also means the parent cannot ptrace the child and other stupidity. The solution here: 1) stop hiding capability bits in status This makes debugging easier! 2) stop giving any task undefined capability bits. it's simple, it you don't put those invalid bits in CAP_FULL_SET you won't get them in init and you won't get them in any other task either. This fixes the cap_issubset() tests and resulting fallout (which made the init task in a docker container untraceable among other things) 3) mask out undefined bits when sys_capset() is called as it might use ~0, ~0 to denote 'all capabilities' for backward/forward compatibility. This lets 'capsh --caps="all=eip" -- -c /bin/bash' run. 4) mask out undefined bit when we read a file capability off of disk as again likely all bits are set in the xattr for forward/backward compatibility. This lets 'setcap all+pe /bin/bash; /bin/bash' run Signed-off-by:
Eric Paris <eparis@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Andrew G. Morgan <morgan@kernel.org> Cc: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: Kees Cook <keescook@chromium.org> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Dan Walsh <dwalsh@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 4c07e328 upstream. The programmed frequency on xc4000 is not the middle frequency, but the initial frequency on the bandwidth range. However, the DVB API works with the middle frequency. This works fine on set_frontend, as the device calculates the needed offset. However, at get_frequency(), the returned value is the initial frequency. That's generally not a big problem on most drivers, however, starting with changeset 6fe1099c, the frequency drift is taken into account at dib7000p driver. This broke support for PCTV 340e, with uses dib7000p demod and xc4000 tuner. Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit a3eec916 upstream. The programmed frequency on xc5000 is not the middle frequency, but the initial frequency on the bandwidth range. However, the DVB API works with the middle frequency. Signed-off-by:
-
Vignesh Raman authored
commit 32333edb upstream. The commits 08c30aca "Bluetooth: Remove RFCOMM session refcnt" and 8ff52f7d "Bluetooth: Return RFCOMM session ptrs to avoid freed session" allow rfcomm_recv_ua and rfcomm_session_close to delete the session (and free the corresponding socket) and propagate NULL session pointer to the upper callers. Additional fix is required to terminate the loop in rfcomm_process_rx function to avoid use of freed 'sk' memory. The issue is only reproducible with kernel option CONFIG_PAGE_POISONING enabled making freed memory being changed and filled up with fixed char value used to unmask use-after-free issues. Signed-off-by:
Vignesh Raman <Vignesh_Raman@mentor.com> Signed-off-by:
Vitaly Kuzmichev <Vitaly_Kuzmichev@mentor.com> Acked-by:
Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Salva Peiró authored
commit f8ca6ac0 upstream. After the zeroing the whole struct struct media_entity_desc u_ent, it is no longer necessary to memset(0) its u_ent.name field. Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Pratyush Anand authored
commit a40178b2 upstream. Problem Summary: Problem has been observed generally with PM states where VBUS goes off during suspend. There are some SS USB devices which take longer time for link training compared to many others. Such devices fail to reconnect with same old address which was associated with it before suspend. When system resumes, at some point of time (dpm_run_callback-> usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device-> usb_port_resume) SW reads hub status. If device is present, then it finishes port resume and re-enumerates device with same address. If device is not present then, SW thinks that device was removed during suspend and therefore does logical disconnection and removes all the resource allocated for this device. Now, if I put sufficient delay just before root hub status read in usb_resume_device then, SW sees always that device is present. In normal course(without any delay) SW sees that no device is present and then SW removes all resource associated with the device at this port. In the latter case, after sometime, device says that hey I am here, now host enumerates it, but with new address. Problem had been reproduced when I connect verbatim USB3.0 hard disc with my STiH407 XHCI host running with 3.10 kernel. I see that similar problem has been reported here. https://bugzilla.kernel.org/show_bug.cgi?id=53211 Reading above it seems that bug was not in 3.6.6 and was present in 3.8 and again it was not present for some in 3.12.6, while it was present for few others. I tested with 3.13-FC19 running at i686 desktop, problem was still there. However, I was failed to reproduce it with 3.16-RC4 running at same i686 machine. I would say it is just a random observation. Problem for few devices is always there, as I am unable to find a proper fix for the issue. So, now question is what should be the amount of delay so that host is always able to recognize suspended device after resume. XHCI specs 4.19.4 says that when Link training is successful, port sets CSC bit to 1. So if SW reads port status before successful link training, then it will not find device to be present. USB Analyzer log with such buggy devices show that in some cases device switch on the RX termination after long delay of host enabling the VBUS. In few other cases it has been seen that device fails to negotiate link training in first attempt. It has been reported till now that few devices take as long as 2000 ms to train the link after host enabling its VBUS and RX termination. This patch implements a 2000 ms timeout for CSC bit to set ie for link training. If in a case link trains before timeout, loop will exit earlier. This patch implements above delay, but only for SS device and when persist is enabled. So, for the good device overhead is almost none. While for the bad devices penalty could be the time which it take for link training. But, If a device was connected before suspend, and was removed while system was asleep, then the penalty would be the timeout ie 2000 ms. Results: Verbatim USB SS hard disk connected with STiH407 USB host running 3.10 Kernel resumes in 461 msecs without this patch, but hard disk is assigned a new device address. Same system resumes in 790 msecs with this patch, but with old device address. Signed-off-by:
Pratyush Anand <pratyush.anand@st.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alexander Usyskin authored
commit fe2f17eb upstream. wait_event_timeout can return 0 or the remaining jiffies so return -ETIME if disconnected state not reached. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
commit 22b987a3 upstream. Link must be reset in case the fw doesn't respond to client disconnect request. We did charge the timer only in irq path from mei_cl_irq_close and not in mei_cl_disconnect Signed-off-by:
-
Alan Stern authored
commit 977dcfdc upstream. This patch fixes a bug in ohci-hcd. When an URB is unlinked, the corresponding Endpoint Descriptor is added to the ed_rm_list and taken off the hardware schedule. Once the ED is no longer visible to the hardware, finish_unlinks() handles the URBs that were unlinked or have completed. If any URBs remain attached to the ED, the ED is added back to the hardware schedule -- but only if the controller is running. This fails when a controller dies. A non-empty ED does not get added back to the hardware schedule and does not remain on the ed_rm_list; ohci-hcd loses track of it. The remaining URBs cannot be unlinked, which causes the USB stack to hang. The patch changes finish_unlinks() so that non-empty EDs remain on the ed_rm_list if the controller isn't running. This requires moving some of the existing code around, to avoid modifying the ED's hardware fields more than once. Signed-off-by:
-
Alan Stern authored
commit 256dbcd8 upstream. The debug routine fill_async_buffer() in ohci-hcd is buggy: It never produces any output because it forgets to initialize the output buffer size. Also, the debug routine ohci_dump() has an unused argument. This patch adds the correct initialization and removes the unused argument. Signed-off-by:
-
- 17 Sep, 2014 8 commits
-
-
Scott Jiang authored
commit 30443408 upstream. The third parameter for snd_pcm_format_set_silence needs the number of samples instead of sample bytes. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Vladimir Davydov authored
commit 093facf3 upstream. If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Vidya Sagar authored
commit 1f6ae47e upstream. We can't do ASPM configuration at enumeration-time because enabling it makes some defective hardware unresponsive, even if ASPM is disabled later (see 41cd766b ("PCI: Don't enable aspm before drivers have had a chance to veto it"). Therefore, we have to do it after a driver claims the device. We previously configured ASPM in pci_set_power_state(), but that's not a very good place because it's not really related to setting the PCI device power state, and doing it there means: - We incorrectly skipped ASPM config when setting a device that's already in D0 to D0. - We unnecessarily configured ASPM when setting a device to a low-power state (the ASPM feature only applies when the device is in D0). - We unnecessarily configured ASPM when called from a .resume() method (ASPM configuration needs to be restored during resume, but pci_restore_pcie_state() should already do this). Move ASPM configuration from pci_set_power_state() to do_pci_enable_device() so we do it when a driver enables a device. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=79621 Fixes: db288c9c ("PCI / PM: restore the original behavior of pci_set_power_state()") Suggested-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Vidya Sagar <sagar.tv@gmail.com> Signed-off-by:
-
Christoph Schulz authored
commit cbace46a upstream. Commit 30919b0b ("x86: avoid low BIOS area when allocating address space") moved the test for resource allocations that fall within the first 1MB of address space from the PCI-specific path to a generic path, such that all resource allocations will avoid this area. However, this breaks ISA cards which need to allocate a memory region within the first 1MB. An example is the i82365 PCMCIA controller and derivatives like the Ricoh RF5C296/396 which map part of the PCMCIA socket memory address space into the first 1MB of system memory address space. They do not work anymore as no usable memory region exists due to this change: Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets host opts [0]: none host opts [1]: none ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10 pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff pcmcia_socket pcmcia_socket1: cs: unable to map card memory! If filtering out the first 1MB is reverted, everything works as expected. Tested-by:
Robert Resch <fli4l@robert.reschpara.de> Signed-off-by:
Christoph Schulz <develop@kristov.de> Signed-off-by:
-
Lukas Czerner authored
commit 4f579ae7 upstream. Currently punch hole code on files with direct/indirect mapping has some problems which may lead to a data loss. For example (from Jan Kara): fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Also the code is a bit weird and it's not using infrastructure provided by indirect.c, but rather creating it's own way. This patch fixes the issues as well as making the operation to run 4 times faster from my testing (punching out 60GB file). It uses similar approach used in ext4_ind_truncate() which takes advantage of ext4_free_branches() function. Also rename the ext4_free_hole_blocks() to something more sensible, like the equivalent we have for extent mapped files. Call it ext4_ind_remove_space(). This has been tested mostly with fsx and some xfstests which are testing punch hole but does not require unwritten extents which are not supported with direct/indirect mapping. Not problems showed up even with 1024k block size. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 77ea2a4b upstream. free_holes_block() passed local variable as a block pointer to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local variable instead of proper place in inode / indirect block. We later zero out proper place in inode / indirect block but don't dirty the inode / buffer again which can lead to subtle issues (some changes e.g. to inode can be lost). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Kevin Hao authored
commit a152056c upstream. I got the following panic on my fsl p5020ds board. Unable to handle kernel paging request for data at address 0x7375627379737465 Faulting instruction address: 0xc000000000100778 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 CoreNet Generic Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145 task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000 NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000 REGS: c0000000fe08aa00 TRAP: 0300 Not tainted (3.15.0-next-20140613) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad2e24 XER: 00000000 DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1 GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80 GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000 GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200 GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000 GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8 GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10 GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400 GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80 NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168 LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168 Call Trace: [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable) [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90 [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130 [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64 [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8 [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384 [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8 [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654 [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4 [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514 [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4 [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94 [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368 [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104 [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734 [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84 [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104 [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4 [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38 [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158 [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80 [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30 [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238 [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268 [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008 7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2 ---[ end trace b4c9a94804a42d40 ]--- It seems that the corrupted partition header on my mtd device triggers a bug in the ftl. In function build_maps() it will allocate the buffers needed by the mtd partition, but if something goes wrong such as kmalloc failure, mtd read error or invalid partition header parameter, it will free all allocated buffers and then return non-zero. In my case, it seems that partition header parameter 'NumTransferUnits' is invalid. And the ftl_freepart() is a function which free all the partition buffers allocated by build_maps(). Given the build_maps() is a self cleaning function, so there is no need to invoke this function even if build_maps() return with error. Otherwise it will causes the buffers to be freed twice and then weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Peter Hurley authored
commit ae84db96 upstream. When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by:
Valerio Vanni <valerio.vanni@inwind.it> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
