Try our best to replace the conditional compilation using
"#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to
simplify the code and to increase compile coverage.

Now we can also remove the __maybe_unused used in max_mapped_addr
declaration.

We also remove the BUG_ON check of mapping the last 4K bytes of the
addressable memory since this is always true for every kernel actually.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The is_kdump_kernel() returns false for !CRASH_DUMP case, so we don't
need the #ifdef CONFIG_CRASH_DUMP for is_kdump_kernel() checking.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the DA9063 as used on the HiFive Unmatched.

 - Support for relative extables, which puts us in line with other
   architectures and save some space in vmlinux.

 - A handful of kexec fixes/improvements, including the ability to run
   crash kernels from PCI-addressable memory on the HiFive Unmatched.

 - Support for the SBI SRST extension, which allows systems that do not
   have an explicit driver in Linux to reboot.

 - A handful of fixes and cleanups, including to the defconfigs and
   device trees.

* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  RISC-V: Use SBI SRST extension when available
  riscv: mm: fix wrong phys_ram_base value for RV64
  RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
  riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
  riscv: errata: alternative: mark vendor_patch_func __initdata
  riscv: head: make secondary_start_common() static
  riscv: remove cpu_stop()
  riscv: try to allocate crashkern region from 32bit addressible memory
  riscv: use hart id instead of cpu id on machine_kexec
  riscv: Don't use va_pa_offset on kdump
  riscv: dts: sifive: fu540-c000: Fix PLIC node
  riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
  riscv: dts: sifive: Group tuples in register properties
  riscv: dts: sifive: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Fix clock controller node
  riscv: dts: microchip: mpfs: Fix reference clock node
  riscv: dts: microchip: mpfs: Fix PLIC node
  riscv: dts: microchip: mpfs: Drop empty chosen node
  riscv: dts: canaan: Group tuples in interrupt properties
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...

Merge branch 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - Some Kconfig changes resulted in BIG_KEYS being unselectable, which
   Justin sent a patch to fix.

 - Geert pointed out that moving to BLAKE2s bloated vmlinux on little
   machines, like m68k, so we now compensate for this.

 - Numerous style and house cleaning fixes, meant to have a cleaner base
   for future changes.

* 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: simplify arithmetic function flow in account()
  random: selectively clang-format where it makes sense
  random: access input_pool_data directly rather than through pointer
  random: cleanup fractional entropy shift constants
  random: prepend remaining pool constants with POOL_
  random: de-duplicate INPUT_POOL constants
  random: remove unused OUTPUT_POOL constants
  random: rather than entropy_store abstraction, use global
  random: remove unused extract_entropy() reserved argument
  random: remove incomplete last_data logic
  random: cleanup integer types
  random: cleanup poolinfo abstraction
  random: fix typo in comments
  lib/crypto: sha1: re-roll loops to reduce code size
  lib/crypto: blake2s: move hmac construction into wireguard
  lib/crypto: add prompts back to crypto libraries

Pull hwspinlock updates from Bjorn Andersson:
 "This contains a change to the stm32 hwspinlock driver to ensure that
  the hardware is operational even without CONFIG_PM"

* tag 'hwlock-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: stm32: enable clock at probe

Now that have_bytes is never modified, we can simplify this function.
First, we move the check for negative entropy_count to be first. That
ensures that subsequent reads of this will be non-negative. Then,
have_bytes and ibytes can be folded into their one use site in the
min_t() function.
Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This is an old driver that has seen a lot of different eras of kernel
coding style. In an effort to make it easier to code for, unify the
coding style around the current norm, by accepting some of -- but
certainly not all of -- the suggestions from clang-format. This should
remove ambiguity in coding style, especially with regards to spacing,
when code is being changed or amended. Consequently it also makes code
review easier on the eyes, following one uniform style rather than
several.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This gets rid of another abstraction we no longer need. It would be nice
if we could instead make pool an array rather than a pointer, but the
latent entropy plugin won't be able to do its magic in that case. So
instead we put all accesses to the input pool's actual data through the
input_pool_data array directly.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The entropy estimator is calculated in terms of 1/8 bits, which means
there are various constants where things are shifted by 3. Move these
into our pool info enum with the other relevant constants. While we're
at it, move an English assertion about sizes into a proper BUILD_BUG_ON
so that the compiler can ensure this invariant.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The other pool constants are prepended with POOL_, but not these last
ones. Rename them. This will then let us move them into the enum in the
following commit.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

We already had the POOL_* constants, so deduplicate the older INPUT_POOL
ones. As well, fold EXTRACT_SIZE into the poolinfo enum, since it's
related.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

We no longer have an output pool. Rather, we have just a wakeup bits
threshold for /dev/random reads, presumably so that processes don't
hang. This value, random_write_wakeup_bits, is configurable anyway. So
all the no longer usefully named OUTPUT_POOL constants were doing was
setting a reasonable default for random_write_wakeup_bits. This commit
gets rid of the constants and just puts it all in the default value of
random_write_wakeup_bits.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Originally, the RNG used several pools, so having things abstracted out
over a generic entropy_store object made sense. These days, there's only
one input pool, and then an uneven mix of usage via the abstraction and
usage via &input_pool. Rather than this uneasy mixture, just get rid of
the abstraction entirely and have things always use the global. This
simplifies the code and makes reading it a bit easier.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

This argument is always set to zero, as a result of us not caring about
keeping a certain amount reserved in the pool these days. So just remove
it and cleanup the function signatures.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

There were a few things added under the "if (fips_enabled)" banner,
which never really got completed, and the FIPS people anyway are
choosing a different direction. Rather than keep around this halfbaked
code, get rid of it so that we can focus on a single design of the RNG
rather than two designs.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Rather than using the userspace type, __uXX, switch to using uXX. And
rather than using variously chosen `char *` or `unsigned char *`, use
`u8 *` uniformly for things that aren't strings, in the case where we
are doing byte-by-byte traversal.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Now that we're only using one polynomial, we can cleanup its
representation into constants, instead of passing around pointers
dynamically to select different polynomials. This improves the codegen
and makes the code a bit more straightforward.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

s/or/for
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

With SHA-1 no longer being used for anything performance oriented, and
also soon to be phased out entirely, we can make up for the space added
by unrolled BLAKE2s by simply re-rolling SHA-1. Since SHA-1 is so much
more complex, re-rolling it more or less takes care of the code size
added by BLAKE2s. And eventually, hopefully we'll see SHA-1 removed
entirely from most small kernel builds.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Basically nobody should use blake2s in an HMAC construction; it already
has a keyed variant. But unfortunately for historical reasons, Noise,
used by WireGuard, uses HKDF quite strictly, which means we have to use
this. Because this really shouldn't be used by others, this commit moves
it into wireguard's noise.c locally, so that kernels that aren't using
WireGuard don't get this superfluous code baked in. On m68k systems,
this shaves off ~314 bytes.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Commit 6048fdcc ("lib/crypto: blake2s: include as built-in") took
away a number of prompt texts from other crypto libraries. This makes
values flip from built-in to module when oldconfig runs, and causes
problems when these crypto libs need to be built in for thingslike
BIG_KEYS.

Fixes: 6048fdcc ("lib/crypto: blake2s: include as built-in")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
[Jason: - moved menu into submenu of lib/ instead of root menu
        - fixed chacha sub-dependencies for CONFIG_CRYPTO]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Pull dmaengine updates from Vinod Koul:
 "A bunch of new support and few updates to drivers:

  New support:
   - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
     driver
   - Support for TI J721S2 SoC in k3-udma driver
   - Support for Ingenic MDMA and BDMA in the JZ4760
   - Support for Renesas r8a779f0 dmac

  Updates:
   - We are finally getting rid of slave_id, so this brings in the
     changes across tree for that
   - updates for idxd driver
   - at_xdmac driver cleanup"

* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dt-bindings: dma-controller: Split interrupt fields in example
  dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
  dmaengine: at_xdmac: Fix race over irq_status
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
  dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
  dmaengine: at_xdmac: Fix lld view setting
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
  dmaengine: at_xdmac: Fix concurrency over xfers_list
  dmaengine: at_xdmac: Move the free desc to the tail of the desc list
  dmaengine: at_xdmac: Fix race for the tx desc callback
  dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
  dmaengine: at_xdmac: Print debug message after realeasing the lock
  dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
  dmaengine: at_xdmac: Don't start transactions at tx_submit level
  dmaengine: idxd: deprecate token sysfs attributes for read buffers
  dmaengine: idxd: change bandwidth token to read buffers
  dmaengine: idxd: fix wq settings post wq disable
  dmaengine: idxd: change MSIX allocation based on per wq activation
  dmaengine: idxd: fix descriptor flushing locking
  dmaengine: idxd: embed irq_entry in idxd_wq struct
  ...

Pull ATA updates from Damien Le Moal:
 "A larger than usual set of changes for this cycle. The bulk of the
  changes are part of a rework of libata messages and debugging features
  from Hannes. In more detail, the changes are as follows.

   - Small code cleanups in the pata_ali driver (unnecessary variable
     initialization and simplified return statement, from Jason and
     Colin.

   - Switch to using struct_group() in the sata_fsl driver, from Kees.

   - Convert many sysfs attribute show functions to use sysfs_emit()
     instead of snprintf(), from me.

   - sata_dwc_460ex driver code cleanups, from Andy.

   - Improve DMA setup and remove superfluous error message in
     libahci_platform, from Andy

   - A small code cleanup in libata to use min() instead of open coding
     test, from Changcheng.

   - Rework of libata messages from Hannes. This is especially focused
     on replacing compile time defined debugging messages (DPRINTK() and
     VPRINTK()) with regular dynamic debugging messages (pr_debug()) and
     traceipoint events. Both libata-core and many drivers are updated
     to have a consistent debugging level control for all drivers.

   - Extend compile test support to as many drivers as possible in ATA
     Kconfig to improve compile test coverage, from me.

   - Fixes to avoid compile time warnings (W=1) and sparse warnings in
     sata_fsl and ahci_xgene drivers, from me.

   - Fix the interface of the read_id() port operation method to clarify
     that the data buffer passed as an argument is little endian. This
     avoids sparse warnings in the pata_netcell, pata_it821x,
     ahci_xgene, ahci_cevaxi and ahci_brcm drivers. From me.

   - Small code cleanup in the pata_octeon_cf driver, from Minghao.

   - Improved IRQ configuration code in pata_of_platform, from Lad.

   - Simplified implementation of __ata_scsi_queuecmd(), from Wenchao.

   - Debounce delay flag renaming, from Paul.

   - Add support for AMD A85 FCH (Hudson D4) AHCI adapters, from Paul"

* tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (106 commits)
  ata: pata_ali: remove redundant return statement
  ata: ahci: Add support for AMD A85 FCH (Hudson D4)
  ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY
  ata: libata-scsi: simplify __ata_scsi_queuecmd()
  ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt
  ata: pata_samsung_cf: add compile test support
  ata: pata_pxa: add compile test support
  ata: pata_imx: add compile test support
  ata: pata_ftide010: add compile test support
  ata: pata_cs5535: add compile test support
  ata: pata_octeon_cf: remove redundant val variable
  ata: fix read_id() ata port operation interface
  ata: ahci_xgene: use correct type for port mmio address
  ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions
  ata: sata_fsl: fix scsi host initialization
  ata: pata_bk3710: add compile test support
  ata: ahci_seattle: add compile test support
  ata: ahci_xgene: add compile test support
  ata: ahci_tegra: add compile test support
  ata: ahci_sunxi: add compile test support
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for controlling the Cortex R7 co-processor in
  Renesas Gen3, support for R5F clusters and C71x DSPs on TI J721S2 and
  compute, audio and modem subsystems on Qualcomm SM6350.

  It fixes a couple of sparse errors related to memcpy_to/fromio and
  corrects the kerneldoc spelling of "Return:".

  The stm32 driver no longer attempts to communicate with the remote
  after the firmware has crashed"

* tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  remoteproc: stm32: Improve crash recovery time
  remoteproc: rcar_rproc: Remove trailing semicolon
  remoteproc: rcar_rproc: Fix pm_runtime_get_sync error check
  remoteproc: qcom: pas: Add SM6350 CDSP support
  remoteproc: qcom: pas: Add SM6350 ADSP support
  remoteproc: qcom: pas: Add SM6350 MPSS support
  dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
  remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP
  remoteproc: imx_rproc: correct firmware reload
  remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
  remoteproc: Add Renesas rcar driver
  dt-bindings: remoteproc: Add Renesas R-Car
  remoteproc: Fix remaining wrong return formatting in documentation
  MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance
  remoteproc: ingenic: Request IRQ disabled
  remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs
  remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs
  dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs
  dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs
  remoteproc: coredump: Correct argument 2 type for memcpy_fromio
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This adds pr_fmt for the rpmsg_char driver, fixes error handling in
  rpmsg_dev_probe() and corrects the spelling of "Return:" in various
  places, in order to fix kerneldoc"

* tag 'rpmsg-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: core: Clean up resources on announce_create failure.
  rpmsg: Fix documentation return formatting
  rpmsg: char: Add pr_fmt() to prefix messages

The "PAGE_SIZE - 2 - size" calculation in legacy_parse_param() is an
unsigned type so a large value of "size" results in a high positive
value instead of a negative value as expected.  Fix this by getting rid
of the subtraction.
Signed-off-by: Jamie Hill-Daniel <jamie@hill-daniel.co.uk>
Signed-off-by: William Liu <willsroot@protonmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more power management updates from Rafael Wysocki:
 "This is a continuation of the rework of device power management macros
  used for declaring device power management callbacks (Paul Cercueil)"

* tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  iio: pressure: bmp280: Use new PM macros
  PM: runtime: Add EXPORT[_GPL]_RUNTIME_DEV_PM_OPS macros
  PM: runtime: Add DEFINE_RUNTIME_DEV_PM_OPS() macro
  PM: core: Add EXPORT[_GPL]_SIMPLE_DEV_PM_OPS macros
  PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro
  PM: core: Remove DEFINE_UNIVERSAL_DEV_PM_OPS() macro

Pull more ACPI updates from Rafael Wysocki:
 "The most significant item here is the Platform Firmware Runtime Update
  and Telemetry (PFRUT) support designed to allow certain pieces of the
  platform firmware to be updated on the fly, among other things.

  Also important is the e820 handling change on x86 that should work
  around PCI BAR allocation issues on some systems shipping since 2019.

  The rest is just a handful of assorted fixes and cleanups on top of
  the ACPI material merged previously.

  Specifics:

   - Add support for the the Platform Firmware Runtime Update and
     Telemetry (PFRUT) interface based on ACPI to allow certain pieces
     of the platform firmware to be updated without restarting the
     system and to provide a mechanism for collecting platform firmware
     telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).

   - Ignore E820 reservations covering PCI host bridge windows on
     sufficiently recent x86 systems to avoid issues with allocating PCI
     BARs on systems where the E820 reservations cover the entire PCI
     host bridge memory window returned by the _CRS object in the
     system's ACPI tables (Hans de Goede).

   - Fix and clean up acpi_scan_init() (Rafael Wysocki).

   - Add more sanity checking to ACPI SPCR tables parsing (Mark
     Langsdorf).

   - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).

   - Drop unnecessary "static" from the ACPI PCC address space handling
     driver added recently (kernel test robot)"

* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PCC: pcc_ctx can be static
  ACPI: scan: Rename label in acpi_scan_init()
  ACPI: scan: Simplify initialization of power and sleep buttons
  ACPI: scan: Change acpi_scan_init() return value type to void
  ACPI: SPCR: check if table->serial_port.access_width is too wide
  ACPI: APD: Check for NULL pointer after calling devm_ioremap()
  x86/PCI: Ignore E820 reservations for bridge windows on newer systems
  ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
  ACPI: pfr_update: Fix return value check in pfru_write()
  ACPI: tools: Introduce utility for firmware updates/telemetry
  ACPI: Introduce Platform Firmware Runtime Telemetry driver
  ACPI: Introduce Platform Firmware Runtime Update device driver
  efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures

Pull more slab updates from Vlastimil Babka:
 "Finish the conversion to struct slab by removing slab-specific fields
  from struct page.

  The first slab update (see merge commit ca1a46d6) did most of the
  conversion, but there was also series in iommu tree removing the
  iommu's usage of struct page 'freelist' field, blocking the final
  struct page cleanup.

  Now that the iommu changes have been merged, we can finish the job"

* tag 'slab-for-5.17-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: Remove slab from struct page

Pull ARC fixes from Vineet Gupta:
 "Nothing too exciting for now"

* tag 'arc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: use swap() to make code cleaner
  arc: perf: Move static structs to where they're really used
  ARC: perf: fix misleading comment about pmu vs counter stop
  arc: Replace lkml.org links with lore
  ARC: perf: Remove redundant initialization of variable idx
  ARC: thread_info.h: correct two typos in a comment

Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Add 'trace' subcommand for 'perf ftrace', setting the stage for
     more 'perf ftrace' subcommands. Not using a subcommand yields the
     previous behaviour of 'perf ftrace'.

   - Add 'latency' subcommand to 'perf ftrace', that can use the
     function graph tracer or a BPF optimized one, via the -b/--use-bpf
     option.

     E.g.:

	$ sudo perf ftrace latency -a -T mutex_lock sleep 1
	#   DURATION     |      COUNT | GRAPH                          |
	     0 - 1    us |       4596 | ########################       |
	     1 - 2    us |       1680 | #########                      |
	     2 - 4    us |       1106 | #####                          |
	     4 - 8    us |        546 | ##                             |
	     8 - 16   us |        562 | ###                            |
	    16 - 32   us |          1 |                                |
	    32 - 64   us |          0 |                                |
	    64 - 128  us |          0 |                                |
	   128 - 256  us |          0 |                                |
	   256 - 512  us |          0 |                                |
	   512 - 1024 us |          0 |                                |
	     1 - 2    ms |          0 |                                |
	     2 - 4    ms |          0 |                                |
	     4 - 8    ms |          0 |                                |
	     8 - 16   ms |          0 |                                |
	    16 - 32   ms |          0 |                                |
	    32 - 64   ms |          0 |                                |
	    64 - 128  ms |          0 |                                |
	   128 - 256  ms |          0 |                                |
	   256 - 512  ms |          0 |                                |
	   512 - 1024 ms |          0 |                                |
	     1 - ...   s |          0 |                                |

     The original implementation of this command was in the bcc tool.

   - Support --cputype option for hybrid events in 'perf stat'.

  Improvements:

   - Call chain improvements for ARM64.

   - No need to do any affinity setup when profiling pids.

   - Reduce multiplexing with duration_time in 'perf stat' metrics.

   - Improve error message for uncore events, stating that some event
     groups are can only be used in system wide (-a) mode.

   - perf stat metric group leader fixes/improvements, including arch
     specific changes to better support Intel topdown events.

   - Probe non-deprecated sysfs path first, i.e. try the path
     /sys/devices/system/cpu/cpuN/topology/thread_siblings first, then
     the old /sys/devices/system/cpu/cpuN/topology/core_cpus.

   - Disable debuginfod by default in 'perf record', to avoid stalls on
     distros such as Fedora 35.

   - Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.

   - Enable ignore_missing_thread in 'perf trace'

  Fixes:

   - Avoid TUI crash when navigating in the annotation of recursive
     functions.

   - Fix hex dump character output in 'perf script'.

   - Fix JSON indentation to 4 spaces standard in the ARM vendor event
     files.

   - Fix use after free in metric__new().

   - Fix IS_ERR_OR_NULL() usage in the perf BPF loader.

   - Fix up cross-arch register support, i.e. when printing register
     names take into account the architecture where the perf.data file
     was collected.

   - Fix SMT fallback with large core counts.

   - Don't lower case MetricExpr when parsing JSON files so as not to
     lose info such as the ":G" event modifier in metrics.

  perf test:

   - Add basic stress test for sigtrap handling to 'perf test'.

   - Fix 'perf test' failures on s/390

   - Enable system wide for metricgroups test in 'perf test´.

   - Use 3 digits for test numbering now we can have more tests.

  Arch specific:

   - Add events for Arm Neoverse N2 in the ARM JSON vendor event files

   - Support PERF_MEM_LVLNUM encodings in powerpc, that came from a
     single patch series, where I incorrectly merged the kernel bits,
     that were then reverted after coordination with Michael Ellerman
     and Stephen Rothwell.

   - Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.

   - Update AMD documentation, with info on raw event encoding.

   - Add support for global and local variants of the "p_stage_cyc" sort
     key, applicable to perf.data files collected on powerpc.

   - Remove duplicate and incorrect aux size checks in the ARM CoreSight
     ETM code.

  Refactorings:

   - Add a perf_cpu abstraction to disambiguate CPUs and CPU map
     indexes, fixing problems along the way.

   - Document CPU map methods.

  UAPI sync:

   - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench
     mem memcpy'

   - Sync UAPI files with the kernel sources: drm, msr-index,
     cpufeatures.

  Build system

   - Enable warnings through HOSTCFLAGS.

   - Drop requirement for libstdc++.so for libopencsd check

  libperf:

   - Make libperf adopt perf_counts_values__scale() from tools/perf/util/.

   - Add a stat multiplexing test to libperf"

* tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits)
  perf record: Disable debuginfod by default
  perf evlist: No need to do any affinity setup when profiling pids
  perf cpumap: Add is_dummy() method
  perf metric: Fix metric_leader
  perf cputopo: Fix CPU topology reading on s/390
  perf metricgroup: Fix use after free in metric__new()
  libperf tests: Update a use of the new cpumap API
  perf arm: Fix off-by-one directory path
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Update tools's copy of drm.h header
  tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
  perf pmu-events: Don't lower case MetricExpr
  perf expr: Add debug logging for literals
  perf tools: Probe non-deprecated sysfs path 1st
  perf tools: Fix SMT fallback with large core counts
  perf cpumap: Give CPUs their own type
  perf stat: Correct first_shadow_cpu to return index
  perf script: Fix flipped index and cpu
  perf c2c: Use more intention revealing iterator
  ...

Pull orangefs fixes from Mike Marshall:
 "Two fixes:

   - Fix the size of a memory allocation in orangefs_bufmap_alloc()
     (Christophe JAILLET)

   - Use default_groups in kobj_type (Greg KH)"

* tag 'for-linus-5.17-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()
  orangefs: use default_groups in kobj_type

Merge support for the Platform Firmware Runtime Update and Telemetry
interface based on ACPI.

The interface provided here allows updating certain pieces of the
platform firmware without restarting the system and collecting
platform firmware telemetry data.

This also includes a utility for accesing the new interface from user
space.

* acpi-pfrut:
  ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
  ACPI: pfr_update: Fix return value check in pfru_write()
  ACPI: tools: Introduce utility for firmware updates/telemetry
  ACPI: Introduce Platform Firmware Runtime Telemetry driver
  ACPI: Introduce Platform Firmware Runtime Update device driver
  efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures

Merge additional ACPI-related updates for 5.17-rc1:

 - Ignore E820 reservations covering PCI host bridge windows on
   sufficiently recent x86 systems to avoid issues with allocating
   PCI BARs on systems where the E820 reservations cover the entire
   PCI host bridge memory window returned by the _CRS object in the
   system's ACPI tables (Hans de Goede).

 - Add more sanity checking to ACPI SPCR tables parsing (Mark
   Langsdorf).

 - Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).

 - Drop unnecessary "static" from the ACPI PCC address space handling
   driver added recently (kernel test robot).

* acpi-x86:
  x86/PCI: Ignore E820 reservations for bridge windows on newer systems

* acpi-tables:
  ACPI: SPCR: check if table->serial_port.access_width is too wide

* acpi-soc:
  ACPI: APD: Check for NULL pointer after calling devm_ioremap()

* acpi-pcc:
  ACPI: PCC: pcc_ctx can be static

Pull cifs updates from Steve French:

 - multichannel patches mostly related to improving reconnect behavior

 - minor cleanup patches

* tag '5.17-rc-part1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix FILE_BOTH_DIRECTORY_INFO definition
  cifs: move superblock magic defitions to magic.h
  cifs: Fix smb311_update_preauth_hash() kernel-doc comment
  cifs: avoid race during socket reconnect between send and recv
  cifs: maintain a state machine for tcp/smb/tcon sessions
  cifs: fix hang on cifs_get_next_mid()
  cifs: take cifs_tcp_ses_lock for status checks
  cifs: reconnect only the connection and not smb session where possible
  cifs: add WARN_ON for when chan_count goes below minimum
  cifs: adjust DebugData to use chans_need_reconnect for conn status
  cifs: use the chans_need_reconnect bitmap for reconnect status
  cifs: track individual channel status using chans_need_reconnect
  cifs: remove redundant assignment to pointer p

Prior to Linux v5.4 devtmpfs used mount_single() which treats the given
mount options as "remount" options, so it updates the configuration of
the single super_block on each mount.

Since that was changed, the mount options used for devtmpfs are ignored.
This is a regression which affect systemd - which mounts devtmpfs with
"-o mode=755,size=4m,nr_inodes=1m".

This patch restores the "remount" effect by calling reconfigure_single()

Fixes: d401727e ("devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single()")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fbdev maintainership update from Helge Deller:
 "The fbdev layer is orphaned, but seems to need some care. So I'd like
  to step up as new maintainer"

* tag 'fbdev-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  MAINTAINERS: Add Helge as fbdev maintainer

Pull input updates from Dmitry Torokhov:
 "Updates to Goodix touchscreen driver (addition of pen support) and
  Silead touchscreen driver (also addition of pen support and parsing of
  embedded firmware to determine screen size), along with assorted fixes
  for other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ti_am335x_tsc - fix a typo in a comment
  Input: zinitix - add compatible for bt532
  Input: zinitix - handle proper supply names
  dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
  Input: axp20x-pek - revert "always register interrupt handlers" change
  Input: gpio-keys - avoid clearing twice some memory
  Input: byd - fix typo in a comment
  Input: ucb1400_ts - remove redundant variable penup
  Input: ti_am335x_tsc - lower the X and Y sampling time
  Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
  Input: ti_am335x_tsc - set ADCREFM for X configuration
  Input: silead - add pen support
  Input: silead - add support for EFI-embedded fw using different min/max coordinates
  Input: goodix - 2 small fixes for pen support
  Input: goodix - improve gpiod_get() error logging
  Input: goodix - add pen support
  Input: ff-core - correct magnitude setting for rumble compatibility
  Input: palmas-pwrbutton - make a couple of arrays static const
  Input: wacom_i2c - clean up the query device fields
  Input: palmas-pwrbutton - use bitfield helpers