Handle platforms with multiple GTs by iterate over all GTs.
Add a Fixes commit so this gets propagated for MTL support.

Fixes: 213c4367 ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Suggested-by: John Harrison <john.c.harrison@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025102826.16955-1-nirmoy.das@intel.com
(cherry picked from commit 949113d3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When i915 perf interface is not available dereferencing it will lead to
NULL dereferences.

As returning -ENOTSUPP is pretty clear return when perf interface is not
available.

Fixes: 2fec5391 ("i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027172822.2753059-1-harshit.m.mogalapalli@oracle.com
[tursulin: added stable tag]
(cherry picked from commit 36f27350)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

eDP specification supports HBR3 link rate since v1.4a. Moreover,
C10 phy can support HBR3 link rate for both DP and eDP. Therefore,
do not clamp the supported rates for eDP at 6.75Gbps.

Cc: <stable@vger.kernel.org>

BSpec: 70073 74224
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018113622.2761997-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit a3431650)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

gen8_ggtt_invalidate() is only needed for limited set of platforms
where GGTT is mapped as WC. This was added as way to fix WC based GGTT in
commit 0f9b91c7 ("drm/i915: flush system agent TLBs on SNB") and
there are no reference in HW docs that forces us to use this on non-WC
backed GGTT.

This can also cause unwanted side-effects on XE_HP platforms where
GFX_FLSH_CNTL_GEN6 is not valid anymore.

v2: Add a func to detect wc ggtt detection (Ville)
v3: Improve commit log and add reference commit (Daniel)

Fixes: d2eae8e9 ("drm/i915/dg2: Drop force_probe requirement")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.2+
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018093815.1349-1-nirmoy.das@intel.com
(cherry picked from commit 81de3e29)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The newly added memset() causes a warning for some reason I could not
figure out:

In file included from arch/x86/include/asm/string.h:3,
                 from drivers/gpu/drm/i915/gt/intel_rc6.c:6:
In function 'rc6_res_reg_init',
    inlined from 'intel_rc6_init' at drivers/gpu/drm/i915/gt/intel_rc6.c:610:2:
arch/x86/include/asm/string_32.h:195:29: error: '__builtin_memset' writing 16 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
  195 | #define memset(s, c, count) __builtin_memset(s, c, count)
      |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/i915/gt/intel_rc6.c:584:9: note: in expansion of macro 'memset'
  584 |         memset(rc6->res_reg, INVALID_MMIO_REG.reg, sizeof(rc6->res_reg));
      |         ^~~~~~
In function 'intel_rc6_init':

Change it to an normal initializer and an added memcpy() that does not have
this problem.

Fixes: 4bb9ca7e ("drm/i915/mtl: C6 residency and C state type for MTL SAMedia")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016201012.1022812-1-arnd@kernel.org
(cherry picked from commit 0520b30b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()

sideswiped each other.

Signal disconnected always.
Signed-off-by: Dave Airlie <airlied@redhat.com>

amd-drm-next-6.7-2023-10-20:

amdgpu:
- SMU 13 updates
- UMSCH updates
- DC MPO fixes
- RAS updates
- MES 11 fixes
- Fix possible memory leaks in error pathes
- GC 11.5 fixes
- Kernel doc updates
- PSP updates
- APU IMU fixes
- Misc code cleanups
- SMU 11 fixes
- OD fix
- Frame size warning fixes
- SR-IOV fixes
- NBIO 7.11 updates
- NBIO 7.7 updates
- XGMI fixes
- devcoredump updates

amdkfd:
- Misc code cleanups
- SVM fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020195043.4937-1-alexander.deucher@amd.com

Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of git://anongit.freedesktop.org/drm/drm into drm-next

vmemdup-user-array API and changes with it.

This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com

Updates for v6.7

DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
  skip validity check for DP CTS EDID checksum

DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
  from log / trace output

gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643

core:
- decouple msm_drv from kms to more cleanly support headless devices (like
  imx5+a2xx)

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.comSigned-off-by: Dave Airlie <airlied@redhat.com>

This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull phy fixes from Vinod Koul:

 - mapphone-mdm6600 runtime pm & pinctrl handling fixes

 - Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
   fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
   check, qmp combo fix for 8550 power config register

 - realtek usb fix for debugfs_create_dir() and kconfig dependency

* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
  phy: qualcomm: Fix typos in comments
  phy: qcom-qmp-combo: initialize PCS_USB registers
  phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
  phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
  phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
  phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
  phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
  phy: qcom-qmp-usb: initialize PCS_USB registers
  phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
  phy: mapphone-mdm6600: Fix runtime PM for remove
  phy: mapphone-mdm6600: Fix runtime disable on probe

Pull EFI fixes from Ard Biesheuvel:
 "The boot_params pointer fix uses a somewhat ugly extern struct
  declaration but this will be cleaned up the next cycle.

   - don't try to print warnings to the console when it is no longer
     available

   - fix theoretical memory leak in SSDT override handling

   - make sure that the boot_params global variable is set before the
     KASLR code attempts to hash it for 'randomness'

   - avoid soft lockups in the memory acceptance code"

* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
  x86/boot: efistub: Assign global boot_params variable
  efi: fix memory leak in krealloc failure handling
  x86/efistub: Don't try to print after ExitBootService()

Pull powerpc fixes from Michael Ellerman:

 - Fix stale propagated yield_cpu in qspinlocks leading to lockups

 - Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER

 - Fix a spurious warning when copros are in use at exit time

Thanks to Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
and Shrikanth Hegde.

* tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/qspinlock: Fix stale propagated yield_cpu
  powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()
  powerpc/mm: Allow ARCH_FORCE_MAX_ORDER up to 12

Pull gpio fixes from Bartosz Golaszewski:

 - fix interrupt handling in suspend and wakeup in gpio-vf610

 - fix a bug on setting direction to output in gpio-vf610

 - add a missing memset() in gpio ACPI code

* tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add missing memset(0) to acpi_get_gpiod_from_data()
  gpio: vf610: set value before the direction to avoid a glitch
  gpio: vf610: mask the gpio irq in system suspend and support wakeup

Pull rust fixes from Miguel Ojeda:

 - GCC build: fix bindgen build error with '-fstrict-flex-arrays'

 - Error module: fix the description for 'ECHILD' and fix Markdown
   style nit

 - Code docs: fix logo replacement

 - Docs: update docs output path

 - Kbuild: remove old docs output path in 'cleandocs' target

* tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux:
  rust: docs: fix logo replacement
  kbuild: remove old Rust docs output path
  docs: rust: update Rust docs output path
  rust: fix bindgen build error with fstrict-flex-arrays
  rust: error: Markdown style nit
  rust: error: fix the description for `ECHILD`

Pull scheduler fix from Ingo Molnar:
 "Fix a recently introduced use-after-free bug"

* tag 'sched-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/eevdf: Fix heap corruption more

Pull perf events fix from Ingo Molnar:
 "Fix group event semantics"

* tag 'perf-urgent-2023-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Disallow mis-matched inherited group reads

Merge tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - kprobe-events: Fix kprobe events to reject if the attached symbol is
   not unique name because it may not the function which the user want
   to attach to. (User can attach a probe to such symbol using the
   nearest unique symbol + offset.)

 - selftest: Add a testcase to ensure the kprobe event rejects non
   unique symbol correctly.

* tag 'probes-fixes-v6.6-rc6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/ftrace: Add new test case which checks non unique symbol
  tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols

Pull s390 fixes from Vasily Gorbik:

 - Fix IOMMU bitmap allocation in s390 PCI to avoid out of bounds access
   when IOMMU pages aren't a multiple of 64

 - Fix kasan crashes when accessing DCSS mapping in memory holes by
   adding corresponding kasan zero shadow mappings

 - Fix a memory leak in css_alloc_subchannel in case
   dma_set_coherent_mask fails

* tag 's390-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix iommu bitmap allocation
  s390/kasan: handle DCSS mapping in memory holes
  s390/cio: fix a memleak in css_alloc_subchannel

Merge tag 'platform-drivers-x86-v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Fix spurious brightness down presses on newer Asus laptop models

 -  Fix backlight control not working on T2 Mac Pro all-in-ones

 -  Add Armin Wolf as new maintainer for the WMI bus driver and change
    its status from orphaned to maintained

 -  A few other small fixes

* tag 'platform-drivers-x86-v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: mlxbf-tmfifo: Fix a warning message
  apple-gmux: Hard Code max brightness for MMIO gmux
  platform/surface: platform_profile: Propagate error if profile registration fails
  platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
  platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
  platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
  platform/x86: wmi: Update MAINTAINERS entry
  platform/x86: msi-ec: Fix the 3rd config
  platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
  platform: mellanox: Fix a resource leak in an error handling path in probing flow

Pull USB / Thunderbolt fixes and ids from Greg KH:
 "Here are four small patches for USB and Thunderbolt for 6.6-rc7 that
  do the following:

   - new usb-serial device ids

   - thunderbolt driver fix for reported issue

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
  USB: serial: option: add entry for Sierra EM9191 with new firmware
  USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
  thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished

Pull crypto fix from Herbert Xu:
 "Fix a 6.5 regression in crypto/asymmetric_keys"

* tag 'v6.6-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  KEYS: asymmetric: Fix sign/verify on pkcs1pad without a hash

Pull iomap fix from Darrick Wong:

 - Fix a bug where a writev consisting of a bunch of sub-fsblock writes
   where the last buffer address is invalid could lead to an infinite
   loop

* tag 'iomap-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix short copy in iomap_write_iter()

Merge tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix regression in reading scale and unit files from sysfs for PMU
   events, so that we can use that info to pretty print instead of
   printing raw numbers:

     # perf stat -e power/energy-ram/,power/energy-gpu/ sleep 2

      Performance counter stats for 'system wide':

                 1.64 Joules power/energy-ram/
                 0.20 Joules power/energy-gpu/

          2.001228914 seconds time elapsed
     #
     # grep -m1 "model name" /proc/cpuinfo
     model name	: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
     #

 - The small llvm.cpp file used to check if the llvm devel files are
   present was incorrectly deleted when removing the BPF event in 'perf
   trace', put it back as it is also used by tools/bpf/bpftool, that
   uses llvm routines to do disassembly of BPF object files.

 - Fix use of addr_location__exit() in dlfilter__object_code(), making
   sure that it is only used to pair a previous addr_location__init()
   call.

* tag 'perf-tools-fixes-for-v6.6-2-2023-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools build: Fix llvm feature detection, still used by bpftool
  perf dlfilter: Add a test for object_code()
  perf dlfilter: Fix use of addr_location__exit() in dlfilter__object_code()
  perf pmu: Fix perf stat output with correct scale and unit

Merge tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "One single fix to assert check in user_events abi_test to properly
  check bit value on Big Endian architectures. The code treated the bit
  values as Little Endian and the check failed on Big Endian"

* tag 'linux_kselftest_active-fixes-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/user_events: Fix abi_test for BE archs

Pull NFS client fixes from Anna Schumaker:
 "Stable Fix:
   - Fix a pNFS hang in nfs4_evict_inode()

  Fixes:
   - Force update of suid/sgid bits after an NFS v4.2 ALLOCATE op
   - Fix a potential oops in nfs_inode_remove_request()
   - Check the validity of the layout pointer in ff_layout_mirror_prepare_stats()
   - Fix incorrectly marking the pNFS MDS with USE_PNFS_DS in some cases"

* tag 'nfs-for-6.6-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server
  pNFS/flexfiles: Check the layout validity in ff_layout_mirror_prepare_stats
  pNFS: Fix a hang in nfs4_evict_inode()
  NFS: Fix potential oops in nfs_inode_remove_request()
  nfs42: client needs to strip file mode's suid/sgid bit after ALLOCATE op

Pull fanotify fix from Jan Kara:
 "Disable superblock / mount marks for filesystems that can encode file
  handles but not open them (currently only overlayfs).

  It is not clear the functionality is useful in any way so let's better
  disable it before someone comes up with some creative misuse"

* tag 'fsnotify_for_v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: limit reporting of event with non-decodeable file handles

Pull ACPI fixes from Rafael Wysocki:
 "These fix the ACPI initialization ordering on ARM and ACPI IRQ
  management in the cases when irq_create_fwspec_mapping() fails.

  Specifics:

   - Fix ACPI initialization ordering on ARM that was changed
     incorrectly during the 6.5 development cycle (Hanjun Guo)

   - Make acpi_register_gsi() return an error code as appropriate when
     irq_create_fwspec_mapping() returns 0 on failure (Sunil V L)"

* tag 'acpi-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Move acpi_arm_init() to the place of after acpi_ghes_init()
  ACPI: irq: Fix incorrect return value in acpi_register_gsi()

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in drivers.

  The mptsas one is really fixing an error path issue where it can leave
  the misc driver loaded even though the sas driver fails to initialize"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix double free of dsd_list during driver load
  scsi: mpt3sas: Fix in error path

Pull pin control fixes from Linus Walleij:

 - Concurrent register updates in the Qualcomm LPASS pin controller gets
   a proper lock.

 - revert a mutex fix that was causing problems: contention on the mutex
   or something of the sort lead to probe reordering and MMC block
   devices start to register in a different order, which unsuspecting
   userspace is not ready to handle

* tag 'pinctrl-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()"
  pinctrl: qcom: lpass-lpi: fix concurrent register updates

Pull MTD fixes from Miquel Raynal:
 "In the raw NAND subsystem, the major fix prevents using cached reads
  with devices not supporting it. There was two bug reports about this.

  Apart from that, three drivers (pl353, arasan and marvell) could
  sometimes hide page program failures due to their their own program
  page helper not being fully compliant with the specification (many
  drivers use the default helpers shared by the core). Adding a missing
  check prevents these situation.

  Finally, the Qualcomm driver had a broken error path.

  In the SPI-NAND subsystem one Micron device used a wrong bitmak
  reporting possibly corrupted ECC status.

  Finally, the physmap-core got stripped from its map_rom fallback by
  mistake, this feature is added back"

* tag 'mtd/fixes-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: Ensure the nand chip supports cached reads
  mtd: rawnand: qcom: Unmap the right resource upon probe failure
  mtd: rawnand: pl353: Ensure program page operations are successful
  mtd: rawnand: arasan: Ensure program page operations are successful
  mtd: spinand: micron: correct bitmask for ecc status
  mtd: physmap-core: Restore map_rom fallback
  mtd: rawnand: marvell: Ensure program page operations are successful

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Capture correct oemid-bits for eMMC cards
   - Fix error propagation for some ioctl commands
   - Hold retuning if SDIO is in 1-bit mode

  MMC host:
   - mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
   - sdhci-msm: Correct minimum number of clocks
   - sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
   - sdhci-sprd: Fix error code in sdhci_sprd_tuning()"

* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Capture correct oemid-bits for eMMC cards
  mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
  mmc: core: Fix error propagation for some ioctl commands
  mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
  mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
  mmc: core: sdio: hold retuning if sdio in 1-bit mode
  dt-bindings: mmc: sdhci-msm: correct minimum number of clocks

This commit is the last part of the fix that reduces the stack size in
the DML2 code.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319 ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When compiling with allmodconfig, gcc highlights the following error:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c: In function 'dml_core_mode_support':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:8229:1: error: the frame size of 2736 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 8229 | } // dml_core_mode_support
      | ^
cc1: all warnings being treated as errors

This commit mitigates part of this problem by extracting the prefetch
code to its own function. After applying this commit, the stack size
reduces from 2736 to 2464, however, the stack size issue becomes part of
the new function.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Chaitanya Dhere <chaitanya.dhere@amd.com>
Fixes: 7966f319 ("drm/amd/display: Introduce DML2")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Split SVM ranges that have been mapped into 2MB page table entries,
require to be remap in case the split has happened in a non-aligned
VA.
[WHY]:
This condition causes the 2MB page table entries be split into 4KB
PTEs.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Even if there's nothing currently parsing amdgpu's coredump files, if
we eventually have such tools they will be glad to find a version field
to properly read the file.

Create a version number to be displayed on top of coredump file, to be
incremented when the file format or content get changed.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Giving that we use codedump just for device resets, move it's functions
and structs to a more semantic file, the amdgpu_reset.{c, h}.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To better organize struct amdgpu_device, keep all reset information
related fields together in a separated struct.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

XGMI TA will set the capability flag to indicate whether the port_num
info is supported or not. KGD checks the flag and accordingly picks up
the right buffer format and send the right command to TA to retrieve
the info.

v2: simplify the code by reusing the same statement (lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>