Pull input updates from Dmitry Torokhov:
 "A few new drivers:

   - driver for Azoteq IQS550/572/525 touch controllers

   - driver for Microchip AT42QT1050 keys

   - driver for GPIO controllable vibrators

   - support for GT5663 in Goodix driver

  ... along with miscellaneous driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - mark expected switch fall-through
  Input: qt1050 - add Microchip AT42QT1050 support
  Input: add support for Azoteq IQS550/572/525
  Input: add a driver for GPIO controllable vibrators
  Input: synaptics-rmi4 - fix enum_fmt
  Input: synaptics-rmi4 - fill initial format
  HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
  Input: add KEY_KBD_LAYOUT_NEXT
  Input: hyperv-keyboard - add module description
  Input: olpc_apsp - depend on ARCH_MMP
  Input: sun4i-a10-lradc-keys - add support for A83T
  Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
  Input: lpc32xx-key - add clocks property and fix DT binding example
  Input: i8042 - signal wakeup from atkbd/psmouse
  Input: goodix - add GT5663 CTP support
  Input: goodix - add regulators suppot
  Input: evdev - use struct_size() in kzalloc() and vzalloc()
  Input: edt-ft5x06 - convert to use SPDX identifier
  Input: edt-ft5x06 - enable ACPI enumeration

Pull networking fixes from David Miller:
 "Fixes all over:

   1) Netdev refcnt leak in nf_flow_table, from Taehee Yoo.

   2) Fix RCU usage in nf_tables, from Florian Westphal.

   3) Fix DSA build when NET_DSA_TAG_BRCM_PREPEND is not set, from Yue
      Haibing.

   4) Add missing page read/write ops to realtek driver, from Heiner
      Kallweit.

   5) Endianness fix in qrtr code, from Nicholas Mc Guire.

   6) Fix various bugs in DSA_SKB_* macros, from Vladimir Oltean.

   7) Several BPF documentation cures, from Quentin Monnet.

   8) Fix undefined behavior in narrow load handling of BPF verifier,
      from Krzesimir Nowak.

   9) DMA ops crash in SGI Seeq driver due to not set netdev parent
      device pointer, from Thomas Bogendoerfer.

  10) Flow dissector has to disable preemption when invoking BPF
      program, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering
  net: ethernet: ti: netcp_ethss: fix build
  flow_dissector: disable preemption around BPF calls
  bonding: fix arp_validate toggling in active-backup mode
  net: meson: fixup g12a glue ephy id
  net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init()
  net: seeq: fix crash caused by not set dev.parent
  of_net: Fix missing of_find_device_by_node ref count drop
  net: mvpp2: cls: Add missing NETIF_F_NTUPLE flag
  bpf: fix undefined behavior in narrow load handling
  libbpf: detect supported kernel BTF features and sanitize BTF
  selftests: bpf: Add files generated after build to .gitignore
  tools: bpf: synchronise BPF UAPI header with tools
  bpf: fix minor issues in documentation for BPF helpers.
  bpf: fix recurring typo in documentation for BPF helpers
  bpf: fix script for generating man page on BPF helpers
  bpf: add various test cases for backward jumps
  net: dccp : proto: remove Unneeded variable "err"
  net: dsa: Remove the now unused DSA_SKB_CB_COPY() macro
  net: dsa: Remove dangerous DSA_SKB_CLONE() macro
  ...

Merge tag 'fsnotify_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull fsnotify fixes from Jan Kara:
 "Two fsnotify fixes"

* tag 'fsnotify_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix unlink performance regression
  fsnotify: Clarify connector assignment in fsnotify_add_mark_list()

Pull misc filesystem updates from Jan Kara:
 "A couple of small bugfixes and cleanups for quota, udf, ext2, and
  reiserfs"

* tag 'fs_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: check time limit when back out space/inode change
  fs/quota: erase unused but set variable warning
  quota: fix wrong indentation
  udf: fix an uninitialized read bug and remove dead code
  fs/reiserfs/journal.c: Make remove_journal_hash static
  quota: remove trailing whitespaces
  quota: code cleanup for __dquot_alloc_space()
  ext2: Adjust the comment of function ext2_alloc_branch
  udf: Explain handling of load_nls() failure

When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.

So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.

Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix reported build fail:
ERROR: "cpsw_ale_flush_multicast" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_create" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_add_vlan" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!

Fixes: 16f54164 ("net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config option")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Various things in eBPF really require us to disable preemption
before running an eBPF program.

syzbot reported :

BUG: assuming atomic context at net/core/flow_dissector.c:737
in_atomic(): 0, irqs_disabled(): 0, pid: 24710, name: syz-executor.3
2 locks held by syz-executor.3/24710:
 #0: 00000000e81a4bf1 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x168e/0x3ff0 drivers/net/tun.c:1850
 #1: 00000000254afebd (rcu_read_lock){....}, at: __skb_flow_dissect+0x1e1/0x4bb0 net/core/flow_dissector.c:822
CPU: 1 PID: 24710 Comm: syz-executor.3 Not tainted 5.1.0+ #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 __cant_sleep kernel/sched/core.c:6165 [inline]
 __cant_sleep.cold+0xa3/0xbb kernel/sched/core.c:6142
 bpf_flow_dissect+0xfe/0x390 net/core/flow_dissector.c:737
 __skb_flow_dissect+0x362/0x4bb0 net/core/flow_dissector.c:853
 skb_flow_dissect_flow_keys_basic include/linux/skbuff.h:1322 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2500 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2493 [inline]
 tun_get_user+0x2cfe/0x3ff0 drivers/net/tun.c:1940
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5fd/0x900 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058
 __do_sys_writev fs/read_write.c:1131 [inline]
 __se_sys_writev fs/read_write.c:1128 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1128
 do_syscall_64+0x103/0x670 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Petar Penkov <ppenkov@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df9, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.

Fixes: 3fe68df9 ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The phy id chosen by Amlogic is incorrectly set in the mdio mux and
does not match the phy driver.

It was not detected before because DT forces the use the correct driver
for the internal PHY.

Fixes: 70904251 ("net: phy: add amlogic g12a mdio mux support")
Reported-by: Qi Duan <qi.duan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After calling phy_select_page() and until calling phy_restore_page(),
the mutex 'mdio_lock' is already locked, so the driver should use
non-locked version of phy functions. Or there will be a deadlock with
'mdio_lock'.

This replaces phy functions called from rtl8211e_config_init() to avoid
the deadlock issue.

Fixes: f81dadbc ("net: phy: realtek: Add rtl8211e rx/tx delays config")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Postpone chain policy update to drop after transaction is complete,
   from Florian Westphal.

2) Add entry to flowtable after confirmation to fix UDP flows with
   packets going in one single direction.

3) Reference count leak in dst object, from Taehee Yoo.

4) Check for TTL field in flowtable datapath, from Taehee Yoo.

5) Fix h323 conntrack helper due to incorrect boundary check,
   from Jakub Jankowski.

6) Fix incorrect rcu dereference when fetching basechain stats,
   from Florian Westphal.

7) Missing error check when adding new entries to flowtable,
   from Taehee Yoo.

8) Use version field in nfnetlink message to honor the nfgen_family
   field, from Kristian Evensen.

9) Remove incorrect configuration check for CONFIG_NF_CONNTRACK_IPV6,
   from Subash Abhinov Kasiviswanathan.

10) Prevent dying entries from being added to the flowtable,
    from Taehee Yoo.

11) Don't hit WARN_ON() with malformed blob in ebtables with
    trailing data after last rule, reported by syzbot, patch
    from Florian Westphal.

12) Remove NFT_CT_TIMEOUT enumeration, never used in the kernel
    code.

13) Fix incorrect definition for NFT_LOGLEVEL_MAX, from Florian
    Westphal.

This batch comes with a conflict that can be fixed with this patch:

diff --cc include/uapi/linux/netfilter/nf_tables.h
index 7bdb234f3d8c,f0cf7b0f4f35..505393c6e959
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@@ -966,6 -966,8 +966,7 @@@ enum nft_socket_keys
   * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address)
   * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address)
   * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address)
 - * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack
+  * @NFT_CT_ID: conntrack id
   */
  enum nft_ct_keys {
  	NFT_CT_STATE,
@@@ -991,6 -993,8 +992,7 @@@
  	NFT_CT_DST_IP,
  	NFT_CT_SRC_IP6,
  	NFT_CT_DST_IP6,
 -	NFT_CT_TIMEOUT,
+ 	NFT_CT_ID,
  	__NFT_CT_MAX
  };
  #define NFT_CT_MAX		(__NFT_CT_MAX - 1)

That replaces the unused NFT_CT_TIMEOUT definition by NFT_CT_ID. If you prefer,
I can also solve this conflict here, just let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

of_find_device_by_node takes a reference to the embedded struct device
which needs to be dropped after use.

Fixes: d01f449c ("of_net: add NVMEM support to of_get_mac_address")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the mvpp2 driver supports classification offloading, we must
add the NETIF_F_NTUPLE to the features list.

Since the current code doesn't allow disabling the feature, we don't set
the flag in dev->hw_features.

Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IOMMU updates from Joerg Roedel:

 - ATS support for ARM-SMMU-v3.

 - AUX domain support in the IOMMU-API and the Intel VT-d driver. This
   adds support for multiple DMA address spaces per (PCI-)device. The
   use-case is to multiplex devices between host and KVM guests in a
   more flexible way than supported by SR-IOV.

 - the rest are smaller cleanups and fixes, two of which needed to be
   reverted after testing in linux-next.

* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
  Revert "iommu/amd: Flush not present cache in iommu_map_page"
  Revert "iommu/amd: Remove the leftover of bypass support"
  iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
  iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
  iommu/vt-d: Set intel_iommu_gfx_mapped correctly
  iommu/amd: Flush not present cache in iommu_map_page
  iommu/vt-d: Cleanup: no spaces at the start of a line
  iommu/vt-d: Don't request page request irq under dmar_global_lock
  iommu/vt-d: Use struct_size() helper
  iommu/mediatek: Fix leaked of_node references
  iommu/amd: Remove amd_iommu_pd_list
  iommu/arm-smmu: Log CBFRSYNRA register on context fault
  iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
  iommu/arm-smmu-v3: Disable tagged pointers
  iommu/arm-smmu-v3: Add support for PCI ATS
  iommu/arm-smmu-v3: Link domains and devices
  iommu/arm-smmu-v3: Add a master->domain pointer
  iommu/arm-smmu-v3: Store SteamIDs in master
  iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
  ACPI/IORT: Check ATS capability in root complex nodes
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the ROHM BD70528 watchdog block

 - a new watchdog driver for the i.MX system controller watchdog

 - conversions to use device managed functions and other improvements

 - refactor watchdog_init_timeout

 - make watchdog core configurable as module

 - pretimeout governors improvements

 - a lot of other fixes

* tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: (114 commits)
  watchdog: Enforce that at least one pretimeout governor is enabled
  watchdog: stm32: add dynamic prescaler support
  watchdog: Improve Kconfig entry ordering and dependencies
  watchdog: npcm: Enable modular builds
  watchdog: Make watchdog core configurable as module
  watchdog: Move pretimeout governor configuration up
  watchdog: Use depends instead of select for pretimeout governors
  watchdog: rtd119x: drop unused module.h include
  watchdog: intel_scu: make it explicitly non-modular
  watchdog: coh901327: make it explicitly non-modular
  watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout
  watchdog: xen_wdt: drop warning after calling watchdog_init_timeout
  watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout
  watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout
  watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout
  watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout
  watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout
  watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: i6300esb: drop warning after calling watchdog_init_timeout
  ...

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-13

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix out of bounds backwards jumps due to a bug in dead code
   removal, from Daniel.

2) Fix libbpf users by detecting unsupported BTF kernel features
   and sanitize them before load, from Andrii.

3) Fix undefined behavior in narrow load handling of context
   fields, from Krzesimir.

4) Various BPF uapi header doc/man page fixes, from Quentin.

5) Misc .gitignore fixups to exclude built files, from Kelsey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 31fd8581 ("bpf: permits narrower load from bpf program
context fields") made the verifier add AND instructions to clear the
unwanted bits with a mask when doing a narrow load. The mask is
computed with

  (1 << size * 8) - 1

where "size" is the size of the narrow load. When doing a 4 byte load
of a an 8 byte field the verifier shifts the literal 1 by 32 places to
the left. This results in an overflow of a signed integer, which is an
undefined behavior. Typically, the computed mask was zero, so the
result of the narrow load ended up being zero too.

Cast the literal to long long to avoid overflows. Note that narrow
load of the 4 byte fields does not have the undefined behavior,
because the load size can only be either 1 or 2 bytes, so shifting 1
by 8 or 16 places will not overflow it. And reading 4 bytes would not
be a narrow load of a 4 bytes field.

Fixes: 31fd8581 ("bpf: permits narrower load from bpf program context fields")
Reviewed-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Iago López Galeiras <iago@kinvolk.io>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Depending on used versions of libbpf, Clang, and kernel, it's possible to
have valid BPF object files with valid BTF information, that still won't
load successfully due to Clang emitting newer BTF features (e.g.,
BTF_KIND_FUNC, .BTF.ext's line_info/func_info, BTF_KIND_DATASEC, etc), that
are not yet supported by older kernel.

This patch adds detection of BTF features and sanitizes BPF object's BTF
by substituting various supported BTF kinds, which have compatible layout:
  - BTF_KIND_FUNC -> BTF_KIND_TYPEDEF
  - BTF_KIND_FUNC_PROTO -> BTF_KIND_ENUM
  - BTF_KIND_VAR -> BTF_KIND_INT
  - BTF_KIND_DATASEC -> BTF_KIND_STRUCT

Replacement is done in such a way as to preserve as much information as
possible (names, sizes, etc) where possible without violating kernel's
validation rules.

v2->v3:
  - remove duplicate #defines from libbpf_util.h

v1->v2:
  - add internal libbpf_internal.h w/ common stuff
  - switch SK storage BTF to use new libbpf__probe_raw_btf()
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The following files are generated after building /selftests/bpf/ and
should be added to .gitignore:

	- libbpf.pc
	- libbpf.so.*
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Quentin Monnet says:

====================
Another round of fixes for the doc in the BPF UAPI header, which can be
turned into a manual page. First patch is the most important, as it fixes
parsing for the bpf_strtoul() helper doc. Following patches are formatting
fixes (nitpicks, mostly). The last one updates the copy of the header,
located under tools/.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Synchronise the bpf.h header under tools, to report the fixes and
additions recently brought to the documentation for the BPF helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit brings many minor fixes to the documentation for BPF helper
functions. Mostly, this is limited to formatting fixes and improvements.
In particular, fix broken formatting for bpf_skb_adjust_room().

Besides formatting, replace the mention of "bpf_fullsock()" (that is not
associated with any function or type exposed to the user) in the
description of bpf_sk_storage_get() by "full socket".
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

"Underlaying packet buffer" should be an "underlying" one, in the
warning about invalidated data and data_end pointers. Through
copy-and-paste, the typo occurred no fewer than 19 times in the
documentation. Let's fix it.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The script broke on parsing function prototype for bpf_strtoul(). This
is because the last argument for the function is a pointer to an
"unsigned long". The current version of the script only accepts "const"
and "struct", but not "unsigned", at the beginning of argument types
made of several words.

One solution could be to add "unsigned" to the list, but the issue could
come up again in the future (what about "long int"?). It turns out we do
not need to have such restrictions on the words: so let's simply accept
any series of words instead.
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a couple of tests to make sure branch(/call) offset adjustments
are correctly performed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull UBI/UBIFS updates from Richard Weinberger:

 - fscrypt framework usage updates

 - One huge fix for xattr unlink

 - Cleanup of fscrypt ifdefs

 - Fix for our new UBIFS auth feature

* tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: wl: Fix uninitialized variable
  ubifs: Drop unnecessary setting of zbr->znode
  ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORT
  ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION
  ubifs: Limit number of xattrs per inode
  ubifs: orphan: Handle xattrs like files
  ubifs: journal: Handle xattrs like files
  ubifs: find.c: replace swap function with built-in one
  ubifs: Do not skip hash checking in data nodes
  ubifs: work around high stack usage with clang
  ubifs: remove unused function __ubifs_shash_final
  ubifs: remove unnecessary #ifdef around fscrypt_ioctl_get_policy()
  ubifs: remove unnecessary calls to set up directory key

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - New AFS partition parser
   - Update MAINTAINERS entry
   - Use of fall-throughs markers

  NAND core changes:
   - Support having the bad block markers in either the first, second or
     last page of a block. The combination of all three location is now
     possible.
   - Constification of NAND_OP_PARSER(_PATTERN) elements.
   - Generic NAND DT bindings changed to yaml format (can be used to
     check the proposed bindings. First platform to be fully supported:
     sunxi.
   - Stopped using several legacy hooks.
   - Preparation to use the generic NAND layer with the addition of
     several helpers and the removal of the struct nand_chip from
     generic functions.
   - Kconfig cleanup to prepare the introduction of external ECC engines
     support.
   - Fallthrough comments.
   - Introduction of the SPI-mem dirmap API for SPI-NAND devices.

  Raw NAND controller drivers changes:
   - nandsim:
      - Switch to ->exec-op().
   - meson:
      - Misc cleanups and fixes.
      - New OOB layout.
   - Sunxi:
      - A23/A33 NAND DMA support.
   - Ingenic:
      - Full reorganization and cleanup.
      - Clear separation between NAND controller and ECC engine.
      - Support JZ4740 an JZ4725B.
   - Denali:
      - Clear controller/chip separation.
      - ->exec_op() migration.
      - Various cleanups.
   - fsl_elbc:
      - Enable software ECC support.
   - Atmel:
      - Sam9x60 support.
   - GPMI:
      - Introduce the GPMI_IS_MXS() macro.
   - Various trivial/spelling/coding style fixes.

  SPI NOR core changes:
   - Print all JEDEC ID bytes on error
   - Fix comment of spi_nor_find_best_erase_type()
   - Add region locking flags for s25fl512s

  SPI NOR controller drivers changes:
   - intel-spi:
      - Avoid crossing 4K address boundary on read/write
      - Add support for Intel Comet Lake SPI serial flash"

* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: part: fix incorrect format specifier for an unsigned long long
  mtd: lpddr_cmds: Mark expected switch fall-through
  mtd: phram: Mark expected switch fall-throughs
  mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
  mtd: cfi_util: mark expected switch fall-throughs
  MAINTAINERS: MTD Git repository is hosted on kernel.org
  MAINTAINERS: Update jffs2 entry
  mtd: afs: add v2 partition parsing
  mtd: afs: factor the IIS read into partition parser
  mtd: afs: factor footer parsing into the v1 part parsing
  mtd: factor out v1 partition parsing
  mtd: afs: simplify partition detection
  mtd: afs: simplify partition parsing
  mtd: partitions: Add OF support to AFS partitions
  mtd: partitions: Add AFS partitions DT bindings
  mtd: afs: Move AFS partition parser to parsers subdir
  mtd: maps: Make uclinux_ram_map static
  mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
  MAINTAINERS: Add myself as MTD maintainer
  MAINTAINERS: Remove my name from the MTD and NAND entries
  ...

Pull UML updates from Richard Weinberger:

 - Kconfig cleanups

 - Fix cpu_all_mask() usage

 - Various bug fixes

* tag 'for-linus-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: irq: don't set the chip for all irqs
  um: define set_pte_at() as a static inline function, not a macro
  um: remove uses of variable length arrays
  um: remove unused variable
  uml: fix a boot splat wrt use of cpu_all_mask
  um: Do not unlock mutex that is not hold.
  hostfs: fix mismatch between link_file definition and declaration
  arch: um: drivers: Kconfig: pedantic formatting
  arch: um: Kconfig: pedantic indention cleanups
  um: Revert to using stack for pt_regs in signal handling

Fix below issue reported by coccicheck

net/dccp/proto.c:266:5-8: Unneeded variable: "err". Return "0" on line
310
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Fix a bug and avoid dangerous usage patterns around DSA_SKB_CB

Making DSA use the sk_buff control block was my idea during the
'Traffic-support-for-SJA1105-DSA-driver' patchset, and I had also
introduced a series of macro helpers that turned out to not be so
helpful:

1. DSA_SKB_ZERO() zeroizes the 48-byte skb->cb area, but due to the high
   performance impact in the hotpath it was only intended to be called
   from the timestamping path. But it turns out that not zeroizing it
   has uncovered the reading of an uninitialized member field of
   DSA_SKB_CB, so in the future just be careful about what needs
   initialization and remove this macro.
2. DSA_SKB_CLONE() contains a flaw in its body definition (originally
   put there to silence checkpatch.pl) and is unusable at this point
   (will only cause NPE's when used). So remove it.
3. For DSA_SKB_COPY() the same performance considerations apply as above
   and therefore it's best to prune this function before it reaches a
   stable kernel and potentially any users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It's best to not expose this, due to the performance hit it may cause
when calling it.

Fixes: b68b0dd0 ("net: dsa: Keep private info in the skb->cb")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This does not cause any bug now because it has no users, but its body
contains two pointer definitions within a code block:

		struct sk_buff *clone = _clone;	\
		struct sk_buff *skb = _skb;	\

When calling the macro as DSA_SKB_CLONE(clone, skb), these variables
would obscure the arguments that the macro was called with, and the
initializers would be a no-op instead of doing their job (undefined
behavior, by the way, but GCC nicely puts NULL pointers instead).

So simply remove this broken macro and leave users to simply call
"DSA_SKB_CB(skb)->clone = clone" by hand when needed.

There is one functional difference when doing what I just suggested
above: the control block won't be transferred from the original skb into
the clone. Since there's no foreseen need for the control block in the
clone ATM, this is ok.

Fixes: b68b0dd0 ("net: dsa: Keep private info in the skb->cb")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sk_buff control block can have any contents on xmit put there by the
stack, so initialization is mandatory, since we are checking its value
after the actual DSA xmit (the tagger may have changed it).

The DSA_SKB_ZERO() macro could have been used for this purpose, but:
- Zeroizing a 48-byte memory region in the hotpath is best avoided.
- It would have triggered a warning with newer compilers since
  __dsa_skb_cb contains a structure within a structure, and the {0}
  initializer was incorrect for that purpose.

So simply remove the DSA_SKB_ZERO() macro and initialize the
deferred_xmit variable by hand (which should be done for all further
dsa_skb_cb variables which need initialization - currently none - to
avoid the performance penalty).

Fixes: 97a69a0d ("net: dsa: Add support for deferred xmit")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

should be same as NFT_LOGLEVEL_AUDIT, so use -, not +.

Fixes: 7eced5ab ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "CrOS EC:
   - Add EC host command support using rpmsg
   - Add new CrOS USB PD logging driver
   - Transfer spi messages at high priority
   - Add support to trace CrOS EC commands
   - Minor fixes and cleanups in protocol and debugfs

  Wilco EC:
   - Standardize Wilco EC mailbox interface
   - Add h1_gpio status to debugfs"

* tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_proto: Add trace event to trace EC commands
  platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper
  platform/chrome: cros_ec: Add EC host command support using rpmsg
  platform/chrome: wilco_ec: Add h1_gpio status to debugfs
  platform/chrome: wilco_ec: Standardize mailbox interface
  platform/chrome: cros_ec_proto: check for NULL transfer function
  platform/chrome: Add CrOS USB PD logging driver
  platform/chrome: cros_ec_spi: Transfer messages at high priority
  platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions
  platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported

When adding missing callbacks I missed that one had them set already.
Interesting that the compiler didn't complain.

Fixes: daf3ddbe ("net: phy: realtek: add missing page operations")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparse was unable to verify endiannes correctness due to reassignment
from le32_to_cpu to the same variable - fix this warning up by providing
a proper __le32 type and initializing it. This is not actually fixing
any bug - rather just addressing the sparse warning.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull gpio updates from Linus Walleij:
 "This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
  later than usual because I was ironing out my own mistakes. I'm
  holding some stuff back for the next kernel as a result, and this
  should be a healthy and well tested batch.

  Core changes:

   - The gpiolib MMIO driver has been enhanced to handle two direction
     registers, i.e. one register to set lines as input and one register
     to set lines as output. It turns out some silicon engineer thinks
     the ability to configure a line as input and output at the same
     time makes sense, this can be debated but includes a lot of analog
     electronics reasoning, and the registers are there and need to be
     handled consistently. Unsurprisingly, we enforce the lines to be
     either inputs or outputs in such schemes.

   - Send in the proper argument value to .set_config() dispatched to
     the pin control subsystem. Nobody used it before, now someone does,
     so fix it to work as expected.

   - The ACPI gpiolib portions can now handle pin bias setting (pull up
     or pull down). This has been in the ACPI spec for years and we
     finally have it properly integrated with Linux GPIOs. It was based
     on an observation from Andy Schevchenko that Thomas Petazzoni's
     changes to the core for biasing the PCA950x GPIO expander actually
     happen to fit hand-in-glove with what the ACPI core needed. Such
     nice synergies happen sometimes.

  New drivers:

   - A new driver for the Mellanox BlueField GPIO controller. This is
     using 64bit MMIO registers and can configure lines as inputs and
     outputs at the same time and after improving the MMIO library we
     handle it just fine. Interesting.

   - A new IXP4xx proper gpiochip driver with hierarchical interrupts
     should be coming in from the ARM SoC tree as well.

  Driver enhancements:

   - The PCA053x driver handles the CAT9554 GPIO expander.

   - The PCA053x driver handles the NXP PCAL6416 GPIO expander.

   - Wake-up support on PCA053x GPIO lines.

   - OMAP now does a nice asynchronous IRQ handling on wake-ups by
     letting everything wake up on edges, and this makes runtime PM work
     as expected too.

  Misc:

   - Several cleanups such as devres fixes.

   - Get rid of some languager comstructs that cause problems when
     compiling with LLVMs clang.

   - Documentation review and update"

* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
  gpio: Update documentation
  docs: gpio: convert docs to ReST and rename to *.rst
  gpio: sch: Remove write-only core_base
  gpio: pxa: Make two symbols static
  gpiolib: acpi: Respect pin bias setting
  gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
  gpiolib: acpi: Set pin value, based on bias, more accurately
  gpiolib: acpi: Change type of dflags
  gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
  gpiolib: Make use of enum gpio_lookup_flags consistent
  gpiolib: Indent entry values of enum gpio_lookup_flags
  gpio: pca953x: add support for pca6416
  dt-bindings: gpio: pca953x: document the nxp,pca6416
  gpio: pca953x: add pcal6416 to the of_device_id table
  gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
  gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
  tracing: stop making gpio tracing configurable
  gpio: pca953x: Configure wake-up path when wake-up is enabled
  gpio: of: Optimize quirk checks
  gpio: mmio: Drop bgpio_dir_inverted
  ...

Pull VFIO updates from Alex Williamson:

 - Improve dev_printk() usage (Bjorn Helgaas)

 - Fix issue with blocking in !TASK_RUNNING state while waiting for
   userspace to release devices (Farhan Ali)

 - Fix error path cleanup in nvlink setup (Greg Kurz)

 - mdev-core cleanups and fixes in preparation for more use cases (Parav
   Pandit)

 - Cornelia has volunteered as an official vfio reviewer (Cornelia Huck)

* tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Add Cornelia Huck as reviewer
  vfio/mdev: Avoid inline get and put parent helpers
  vfio/mdev: Fix aborting mdev child device removal if one fails
  vfio/mdev: Follow correct remove sequence
  vfio/mdev: Avoid masking error code to EBUSY
  vfio/mdev: Drop redundant extern for exported symbols
  vfio/mdev: Removed unused kref
  vfio/mdev: Avoid release parent reference during error path
  vfio-pci/nvlink2: Fix potential VMA leak
  vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING"
  vfio: Use dev_printk() when possible