- 06 Sep, 2019 24 commits
-
-
Adrian Vladu authored
[ Upstream commit 5912e791 ] Fixed pep8/flake8 python style code for lsvmbus tool. The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus Signed-off-by:
Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hans Ulli Kroll authored
[ Upstream commit 77775888 ] On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Y.C. Chen authored
[ Upstream commit 05b43971 ] There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.comSigned-off-by:
-
Wolfram Sang authored
[ Upstream commit d7437fc0 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: c31d0a00 ("i2c: emev2: add slave support") Reported-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 7b814d85 ] After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device. Fixes: de20d185 ("i2c: rcar: add slave support") Reported-by:
-
Will Deacon authored
[ Upstream commit 5717fe5a ] If a CPU doesn't support the page size for which the kernel is configured, then we will complain and refuse to bring it online. For secondary CPUs (and the boot CPU on a system booting with EFI), we will also print an error identifying the mismatch. Consequently, the only time that the cpufeature code can detect a granule size mismatch is for a granule other than the one that is currently being used. Although we would rather such systems didn't exist, we've unfortunately lost that battle and Kevin reports that on his amlogic S922X (odroid-n2 board) we end up warning and taining with defconfig because 16k pages are not supported by all of the CPUs. In such a situation, we don't actually care about the feature mismatch, particularly now that KVM only exposes the sanitised view of the CPU registers (commit 93390c0a - "arm64: KVM: Hide unsupported AArch64 CPU features from guests"). Treat the granule fields as non-strict and let Kevin run without a tainted kernel. Cc: Marc Zyngier <maz@kernel.org> Reported-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> [catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit] Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit ae78ca3c ] In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error. Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 4a56a478 ] If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 602fda17 ] In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set. Signed-off-by:
-
Robin Murphy authored
[ Upstream commit ab2cbeb0 ] Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment. As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison. Fixes: 809eac54 ("iommu/dma: Implement scatterlist segment merging") Reported-by:
Nicolin Chen <nicoleotsuka@gmail.com> Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit d555c343 ] The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1. The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value. This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard. The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c. I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nlSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 39c71a5b ] In stm32_mdma_irq_handler(), chan is checked on line 1368. When chan is NULL, it is still used on line 1369: dev_err(chan2dev(chan), "MDMA channel not initialized\n"); Thus, a possible null-pointer dereference may occur. To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: a4ffb13c ("dmaengine: Add STM32 MDMA driver") Link: https://lore.kernel.org/r/20190729020849.17971-1-baijiaju1990@gmail.comSigned-off-by:
-
zhengbin authored
[ Upstream commit b33d5675 ] In panel_attach, if misc_register fails, we need to delete scan_timer, which was setup in keypad_init->init_scan_timer. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 664b1658 ] Two off-by-one errors: INTSTAT0 missed BIT(31) and INTSTAT1 is only defined on first 16 bits. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-15-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit b07dd9b4 ] wrong prefix and wrong macro. Signed-off-by:
-
Keith Busch authored
[ Upstream commit bd46a906 ] Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
[ Upstream commit b9156dae ] When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by:
James Puthukattukaran <james.puthukattukaran@oracle.com> Tested-by:
-
Logan Gunthorpe authored
[ Upstream commit 86b9a63e ] After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete. This means a race can occur if a port is removed but there are still active controllers trying to access that memory. To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 5dc84855 ] In the in-kernel afs filesystem, d_fsdata is set with the data version of the parent directory. afs_d_revalidate() will update this to the current directory version, but it shouldn't do this if it the value it read from d_fsdata is the same as no lock is held and cmpxchg() is not used. Fix the code to only change the value if it is different from the current directory version. Fixes: 260a9803 ("[AFS]: Add "directory write" support.") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit a6eed4ab ] In afs_read_dir(), there is an if statement on line 255 to check whether req->pages is NULL: if (!req->pages) goto error; If req->pages is NULL, afs_put_read() on line 337 is executed. In afs_put_read(), req->pages[i] is used on line 195. Thus, a possible null-pointer dereference may occur in this case. To fix this possible bug, an if statement is added in afs_put_read() to check req->pages. This bug is found by a static analysis tool STCheck written by us. Fixes: f3ddee8d ("afs: Fix directory handling") Signed-off-by:
-
Marc Dionne authored
[ Upstream commit 4a46fdba ] afs_deliver_vl_get_entry_by_name_u() scans through the vl entry received from the volume location server and builds a return list containing the sites that are currently valid. When assigning values for the return list, the index into the vl entry (i) is used rather than the one for the new list (entry->nr_server). If all sites are usable, this works out fine as the indices will match. If some sites are not valid, for example if AFS_VLSF_DONTUSE is set, fs_mask and the uuid will be set for the wrong return site. Fix this by using entry->nr_server as the index into the arrays being filled in rather than i. This can lead to EDESTADDRREQ errors if none of the returned sites have a valid fs_mask. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
Jeffrey Altman <jaltman@auristor.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 2067b2b3 ] Fix the service handler function for the CB.ProbeUuid RPC call so that it replies in the correct manner - that is an empty reply for success and an abort of 1 for failure. Putting 0 or 1 in an integer in the body of the reply should result in the fileserver throwing an RX_PROTOCOL_ERROR abort and discarding its record of the client; older servers, however, don't necessarily check that all the data got consumed, and so might incorrectly think that they got a positive response and associate the client with the wrong host record. If the client is incorrectly associated, this will result in callbacks intended for a different client being delivered to this one and then, when the other client connects and responds positively, all of the callback promises meant for the client that issued the improper response will be lost and it won't receive any further change notifications. Fixes: 9396d496 ("afs: support the CB.ProbeUuid RPC op") Signed-off-by:
-
Anthony Iliopoulos authored
[ Upstream commit fab7772b ] When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by:
Anthony Iliopoulos <ailiopoulos@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 5d6fb560 ] clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced: drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = { Mark these __maybe_unused to shut up the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
- 29 Aug, 2019 16 commits
-
-
Greg Kroah-Hartman authored
-
David Howells authored
[ Upstream commit 68553f1a ] Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called on an unbound socket on which rx->local is not yet set. The following reproduced (includes omitted): int main(void) { socket(AF_RXRPC, SOCK_DGRAM, AF_INET); return 0; } causes the following oops to occur: BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:rxrpc_unuse_local+0x8/0x1b ... Call Trace: rxrpc_release+0x2b5/0x338 __sock_release+0x37/0xa1 sock_close+0x14/0x17 __fput+0x115/0x1e9 task_work_run+0x72/0x98 do_exit+0x51b/0xa7a ? __context_tracking_exit+0x4e/0x10e do_group_exit+0xab/0xab __x64_sys_exit_group+0x14/0x17 do_syscall_64+0x89/0x1d4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Howells authored
[ Upstream commit b00df840 ] When a local endpoint (struct rxrpc_local) ceases to be in use by any AF_RXRPC sockets, it starts the process of being destroyed, but this doesn't cause it to be removed from the namespace endpoint list immediately as tearing it down isn't trivial and can't be done in softirq context, so it gets deferred. If a new socket comes along that wants to bind to the same endpoint, a new rxrpc_local object will be allocated and rxrpc_lookup_local() will use list_replace() to substitute the new one for the old. Then, when the dying object gets to rxrpc_local_destroyer(), it is removed unconditionally from whatever list it is on by calling list_del_init(). However, list_replace() doesn't reset the pointers in the replaced list_head and so the list_del_init() will likely corrupt the local endpoints list. Fix this by using list_replace_init() instead. Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com Signed-off-by:
-
David Howells authored
commit 06d9532f upstream. rxrpc_queue_local() attempts to queue the local endpoint it is given and then, if successful, prints a trace line. The trace line includes the current usage count - but we're not allowed to look at the local endpoint at this point as we passed our ref on it to the workqueue. Fix this by reading the usage count before queuing the work item. Also fix the reading of local->debug_id for trace lines, which must be done with the same consideration as reading the usage count. Fixes: 09d2bf59 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting") Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com Signed-off-by:
-
David Howells authored
commit 730c5fd4 upstream. The object lifetime management on the rxrpc_local struct is broken in that the rxrpc_local_processor() function is expected to clean up and remove an object - but it may get requeued by packets coming in on the backing UDP socket once it starts running. This may result in the assertion in rxrpc_local_rcu() firing because the memory has been scheduled for RCU destruction whilst still queued: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:468! Note that if the processor comes around before the RCU free function, it will just do nothing because ->dead is true. Fix this by adding a separate refcount to count active users of the endpoint that causes the endpoint to be destroyed when it reaches 0. The original refcount can then be used to refcount objects through the work processor and cause the memory to be rcu freed when that reaches 0. Fixes: 4f95dd78 ("rxrpc: Rework local endpoint management") Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com Signed-off-by:
-
Alastair D'Silva authored
The upstream commit: 22e9c88d ("powerpc/64: reuse PPC32 static inline flush_dcache_range()") has a similar effect, but since it is a rewrite of the assembler to C, is too invasive for stable. This patch is a minimal fix to address the issue in assembler. This patch applies cleanly to v5.2, v4.19 & v4.14. When calling flush_(inval_)dcache_range with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e0702d90 ] This function is supposed to return error pointers so it matches the dmz_get_rnd_zone_for_reclaim() function. The current code could lead to a NULL dereference in dmz_do_reclaim() Fixes: b234c6d7 ("dm zoned: improve error handling in reclaim") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
commit 710d707d upstream. During testing of xfs/141 on a V4 filesystem, I observed some inconsistent behavior with regards to resources that are held (i.e. remain locked) across a defer roll. The transaction roll always gives the defer roll function a new transaction, even if committing the old transaction fails. However, the defer roll function only rejoins the held resources if the transaction commit succeedied. This means that callers of defer roll have to figure out whether the held resources are attached to the transaction being passed back. Worse yet, if the defer roll was part of a defer finish call, we have a third possibility: the defer finish could pass back a dirty transaction with dirty held resources and an error code. The only sane way to handle all of these scenarios is to require that the code that held the resource either cancel the transaction before unlocking and releasing the resources, or use functions that detach resources from a transaction properly (e.g. xfs_trans_brelse) if they need to drop the reference before committing or cancelling the transaction. In order to make this so, change the defer roll code to join held resources to the new transaction unconditionally and fix all the bhold callers to release the held buffers correctly. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> [mcgrof: fixes kz#204223 ] Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Allison Henderson authored
commit 068f985a upstream. This patch adds xfs_attr_remove_args. These sub-routines remove the attributes specified in @args. We will use this later for setting parent pointers as a deferred attribute operation. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Allison Henderson authored
commit 2f3cd809 upstream. This patch adds xfs_attr_set_args and xfs_bmap_set_attrforkoff. These sub-routines set the attributes specified in @args. We will use this later for setting parent pointers as a deferred attribute operation. [dgc: remove attr fork init code from xfs_attr_set_args().] [dgc: xfs_attr_try_sf_addname() NULLs args.trans after commit.] [dgc: correct sf add error handling.] Signed-off-by:
-
Allison Henderson authored
commit 4c74a56b upstream. This patch adds a subroutine xfs_attr_try_sf_addname used by xfs_attr_set. This subrotine will attempt to add the attribute name specified in args in shortform, as well and perform error handling previously done in xfs_attr_set. This patch helps to pre-simplify xfs_attr_set for reviewing purposes and reduce indentation. New function will be added in the next patch. [dgc: moved commit to helper function, too.] Signed-off-by:
-
Allison Henderson authored
commit e2421f0b upstream. This patch moves fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h since xfs_attr.c is in libxfs. We will need these later in xfsprogs. Signed-off-by:
-
Brian Foster authored
commit 6958d11f upstream. We've had rather rare reports of bmap btree block corruption where the bmap root block has a level count of zero. The root cause of the corruption is so far unknown. We do have verifier checks to detect this form of on-disk corruption, but this doesn't cover a memory corruption variant of the problem. The latter is a reasonable possibility because the root block is part of the inode fork and can reside in-core for some time before inode extents are read. If this occurs, it leads to a system crash such as the following: BUG: unable to handle kernel paging request at ffffffff00000221 PF error: [normal kernel read fault] ... RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs] ... Call Trace: xfs_iread_extents+0x379/0x540 [xfs] xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs] ? xfs_attr_get+0xd1/0x120 [xfs] ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_iomap_begin+0x4c4/0x6d0 [xfs] ? __vfs_getxattr+0x53/0x70 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_apply+0x63/0x130 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_file_buffered_write+0x62/0x90 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs] __vfs_write+0x150/0x1b0 vfs_write+0xba/0x1c0 ksys_pwrite64+0x64/0xa0 do_syscall_64+0x5a/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The crash occurs because xfs_iread_extents() attempts to release an uninitialized buffer pointer as the level == 0 value prevented the buffer from ever being allocated or read. Change the level > 0 assert to an explicit error check in xfs_iread_extents() to avoid crashing the kernel in the event of localized, in-core inode corruption. Signed-off-by:
-
Darrick J. Wong authored
commit 1fb254aa upstream. Benjamin Moody reported to Debian that XFS partially wedges when a chgrp fails on account of being out of disk quota. I ran his reproducer script: # adduser dummy # adduser dummy plugdev # dd if=/dev/zero bs=1M count=100 of=test.img # mkfs.xfs test.img # mount -t xfs -o gquota test.img /mnt # mkdir -p /mnt/dummy # chown -c dummy /mnt/dummy # xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt (and then as user dummy) $ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo $ chgrp plugdev /mnt/dummy/foo and saw: ================================================ WARNING: lock held when returning to user space! 5.3.0-rc5 #rc5 Tainted: G W ------------------------------------------------ chgrp/47006 is leaving the kernel with locks still held! 1 lock held by chgrp/47006: #0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs] ...which is clearly caused by xfs_setattr_nonsize failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. Add the missing unlock. Reported-by: benjamin.moody@gmail.com Fixes: 253f4911 ("xfs: better xfs_trans_alloc interface") Signed-off-by:
Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
-
Henry Burns authored
commit 701d6785 upstream. In zs_destroy_pool() we call flush_work(&pool->free_work). However, we have no guarantee that migration isn't happening in the background at that time. Since migration can't directly free pages, it relies on free_work being scheduled to free the pages. But there's nothing preventing an in-progress migrate from queuing the work *after* zs_unregister_migration() has called flush_work(). Which would mean pages still pointing at the inode when we free it. Since we know at destroy time all objects should be free, no new migrations can come in (since zs_page_isolate() fails for fully-free zspages). This means it is sufficient to track a "# isolated zspages" count by class, and have the destroy logic ensure all such pages have drained before proceeding. Keeping that state under the class spinlock keeps the logic straightforward. In this case a memory leak could lead to an eventual crash if compaction hits the leaked page. This crash would only occur if people are changing their zswap backend at runtime (which eventually starts destruction). Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
Henry Burns <henryburns@google.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Henry Burns authored
commit 1a87aa03 upstream. In zs_page_migrate() we call putback_zspage() after we have finished migrating all pages in this zspage. However, the return value is ignored. If a zs_free() races in between zs_page_isolate() and zs_page_migrate(), freeing the last object in the zspage, putback_zspage() will leave the page in ZS_EMPTY for potentially an unbounded amount of time. To fix this, we need to do the same thing as zs_page_putback() does: schedule free_work to occur. To avoid duplicated code, move the sequence to a new putback_zspage_deferred() function which both zs_page_migrate() and zs_page_putback() call. Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
-
