- 08 Mar, 2022 8 commits
-
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220228183342.24129-1-jose.exposito89@gmail.com
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
-
Maxime Ripard authored
The komeda KMS driver will call drm_plane_create_color_properties() with a default encoding and range values of BT601 and Limited Range, respectively. Since the initial value wasn't carried over in the state, the driver had to set it again in komeda_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Cc: Brian Starkey <brian.starkey@arm.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-20-maxime@cerno.tech
-
Maxime Ripard authored
The komeda KMS driver will call drm_plane_create_zpos_property() with an init value of the plane index. Since the initial value wasn't carried over in the state, the driver had to set it again in komeda_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Cc: Brian Starkey <brian.starkey@arm.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
-
Maxime Ripard authored
komeda_plane_reset() does the state initialisation by copying a lot of the code found in the __drm_atomic_helper_plane_reset(). Let's switch to that helper and reduce the boilerplate. Cc: Brian Starkey <brian.starkey@arm.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
-
Wan Jiabing authored
Fix the following coccicheck warning: ./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL but dereferenced. Here should be ovl->idx rather than r_ovl->idx. Fixes: e02b5cc9 ("drm/omap: Add a 'right overlay' to plane state") Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220307095612.409090-1-wanjiabing@vivo.com
-
- 07 Mar, 2022 2 commits
-
-
Dan Carpenter authored
Set the error code to -ENOMEM if drm_random_order() fails. Fixes: e6ff5ef8 ("drm/selftests: add drm buddy smoke testcase") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Arunpravin <Arunpravin.PaneerSelvam@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220307125458.GA16710@kili
-
Geert Uytterhoeven authored
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
- 04 Mar, 2022 5 commits
-
-
Michal Suchanek authored
efifb is the only user of efifb_setup_from_dmi which is provided by sysfb which is selected by efifb. That makes the stub redundant. Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/7416c439d68e9e96068ea5c77e05c99c7df41750.1645822213.git.msuchanek@suse.de
-
Michal Suchanek authored
Since switch to simplefb/simpledrm VESA graphic mode selection with vga= kernel parameter is no longer available with legacy BIOS. The x86 realmode boot code enables the VESA graphic modes when option FB_BOOT_VESA_SUPPORT is enabled. This option is selected by vesafb but not simplefb/simpledrm. To enable use of VESA modes with simplefb in legacy BIOS boot mode drop dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select the option from sysfb rather than the drivers that depend on it. The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86 platform, move it from fbdev to x86 Kconfig. Fixes: e3263ab3 ("x86: provide platform-devices for boot-framebuffers") Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Michal Suchanek authored
efifb and vesafb requires sysfb implicitly but this is not stated in Kconfig. Add the dependency. With that all drivers that require sysfb depend on it so it can default to disabled. Signed-off-by:
-
Nikita Yushchenko authored
Hotplug events reported by bridge drivers over drm_bridge_hpd_notify() get ignored unless somebody calls drm_bridge_hpd_enable(). When the connector for the bridge is bridge_connector, such a call is done from drm_bridge_connector_enable_hpd(). However drm_bridge_connector_enable_hpd() is never called on init paths, documentation suggests that it is intended for suspend/resume paths. In result, once encoders are switched to bridge_connector, bridge-detected HPD stops working. This patch adds a call to that API on init path. This fixes HDMI HPD with rcar-du + adv7513 case when adv7513 reports HPD events via interrupts. Fixes: c24110a8 ("drm: rcar-du: Use drm_bridge_connector_init() helper") Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211225063151.2110878-1-nikita.yoush@cogentembedded.com
-
Arunpravin authored
pass the correct size value computed using the max_order. <log snip> [ 68.124177][ T1] UBSAN: shift-out-of-bounds in include/linux/log2.h:67:13 [ 68.125333][ T1] shift exponent 4294967295 is too large for 32-bit type 'long unsigned int' [ 68.126563][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.17.0-rc2-00311-g39ec47bbfd5d #2 [ 68.127758][ T1] Call Trace: [ 68.128187][ T1] dump_stack_lvl (lib/dump_stack.c:108) [ 68.128793][ T1] dump_stack (lib/dump_stack.c:114) [ 68.129331][ T1] ubsan_epilogue (lib/ubsan.c:152) [ 68.129958][ T1] __ubsan_handle_shift_out_of_bounds.cold (arch/x86/include/asm/smap.h:85) [ 68.130791][ T1] ? drm_block_alloc+0x28/0x80 [ 68.131582][ T1] ? rcu_read_lock_sched_held (kernel/rcu/update.c:125) [ 68.132215][ T1] ? kmem_cache_alloc (include/trace/events/kmem.h:54 mm/slab.c:3501) [ 68.132878][ T1] ? mark_free+0x2e/0x80 [ 68.133524][ T1] drm_buddy_init.cold (include/linux/log2.h:67 drivers/gpu/drm/drm_buddy.c:131) [ 68.134145][ T1] ? test_drm_cmdline_init (drivers/gpu/drm/selftests/test-drm_buddy.c:87) [ 68.134770][ T1] igt_buddy_alloc_limit (drivers/gpu/drm/selftests/test-drm_buddy.c:30) [ 68.135472][ T1] ? vprintk_default (kernel/printk/printk.c:2257) [ 68.136057][ T1] ? test_drm_cmdline_init (drivers/gpu/drm/selftests/test-drm_buddy.c:87) [ 68.136812][ T1] test_drm_buddy_init (drivers/gpu/drm/selftests/drm_selftest.c:77 drivers/gpu/drm/selftests/test-drm_buddy.c:95) [ 68.137475][ T1] do_one_initcall (init/main.c:1300) [ 68.138111][ T1] ? parse_args (kernel/params.c:609 kernel/params.c:146 kernel/params.c:188) [ 68.138717][ T1] do_basic_setup (init/main.c:1372 init/main.c:1389 init/main.c:1408) [ 68.139366][ T1] kernel_init_freeable (init/main.c:1617) [ 68.140040][ T1] ? rest_init (init/main.c:1494) [ 68.140634][ T1] kernel_init (init/main.c:1504) [ 68.141155][ T1] ret_from_fork (arch/x86/entry/entry_32.S:772) [ 68.141607][ T1] ================================================================================ [ 68.146730][ T1] ------------[ cut here ]------------ [ 68.147460][ T1] kernel BUG at drivers/gpu/drm/drm_buddy.c:140! [ 68.148280][ T1] invalid opcode: 0000 [#1] [ 68.148895][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.17.0-rc2-00311-g39ec47bbfd5d #2 [ 68.149896][ T1] EIP: drm_buddy_init (drivers/gpu/drm/drm_buddy.c:140 (discriminator 1)) For more details: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/FDIF3HCILZNN5UQAZMOR7E3MQSMHHKWU/Signed-off-by:
kernel test robot <oliver.sang@intel.com> Acked-by:
-
- 03 Mar, 2022 2 commits
-
-
Guo Zhengkui authored
Fix following coccicheck warning: drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c:316:11-12: WARNING this kind of initialization is deprecated. `void *map = map` has the same form of uninitialized_var() macro. I remove the redundant assignement. It has been tested with gcc (Debian 8.3.0-6) 8.3.0. The patch which removed uninitialized_var() is: https://lore.kernel.org/all/20121028102007.GA7547@gmail.com/ And there is very few "/* GCC */" comments in the Linux kernel code now. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Colin Ian King authored
Pointer mode is being assigned a value that is never read, it is being re-assigned later with a new value. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/gpu/drm/solomon/ssd130x.c:582:27: warning: Value stored to 'mode' during its initialization is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
- 02 Mar, 2022 10 commits
-
-
Tommy Haung authored
Add AST2600 chip support and setting. Signed-off-by:
Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Tommy Haung authored
Add interrupt clear register define for further chip support. Signed-off-by:
-
Thomas Zimmermann authored
Add a TODO item for optimizing blitting and format-conversion helpers in DRM and fbdev. There's always demand for faster graphics output. v4: * fix typos (Sam) Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Improve the performance of cfb_imageblit() by manually unrolling the inner blitting loop and moving some invariants out. The compiler failed to do this automatically. This change keeps cfb_imageblit() in sync with sys_imagebit(). A microbenchmark measures the average number of CPU cycles for cfb_imageblit() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). cfb_imageblit(), new: 15724 cycles cfb_imageblit(): old: 30566 cycles In the optimized case, cfb_imageblit() is now ~2x faster than before. v3: * fix commit description (Pekka) Signed-off-by:
-
Thomas Zimmermann authored
Fix coding style. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Improve the performance of sys_imageblit() by manually unrolling the inner blitting loop and moving some invariants out. The compiler failed to do this automatically. The resulting binary code was even slower than the cfb_imageblit() helper, which uses the same algorithm, but operates on I/O memory. A microbenchmark measures the average number of CPU cycles for sys_imageblit() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). The value for CFB is given as a reference. sys_imageblit(), new: 25934 cycles sys_imageblit(), old: 35944 cycles cfb_imageblit(): 30566 cycles In the optimized case, sys_imageblit() is now ~30% faster than before and ~20% faster than cfb_imageblit(). v2: * move switch out of inner loop (Gerd) * remove test for alignment of dst1 (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Improve the performance of sys_fillrect() by using word-aligned 32/64-bit mov instructions. While the code tried to implement this, the compiler failed to create fast instructions. The resulting binary instructions were even slower than cfb_fillrect(), which uses the same algorithm, but operates on I/O memory. A microbenchmark measures the average number of CPU cycles for sys_fillrect() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). The value for CFB is given as a reference. sys_fillrect(), new: 26586 cycles sys_fillrect(), old: 166603 cycles cfb_fillrect(): 41012 cycles In the optimized case, sys_fillrect() is now ~6x faster than before and ~1.5x faster than the CFB implementation. Signed-off-by:
-
Tom Rix authored
For spdx change tab to space delimiter Use // for *.c Replacements commited to committed regsiters to registers initialze to initialize Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Liu Ying authored
To initialize register NWL_DSI_IRQ_MASK, it's enough to write it only once in function nwl_dsi_init_interrupts(). Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220216085842.1973868-1-victor.liu@nxp.com
-
Hsin-Yi Wang authored
If the previous transfer didn't end with a command without DP_AUX_I2C_MOT, the next read trasnfer will miss the first byte. But if the command in previous transfer is requested with length 0, it's a no-op to anx7625 since it can't process this command. anx7625 requires the last command to be read command with length > 0. It's observed that if we clear the DP_AUX_I2C_MOT in read transfer, we can still get correct data. Clear the read commands with DP_AUX_I2C_MOT bit to fix this issue. Fixes: adca62ec ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
- 01 Mar, 2022 3 commits
-
-
Melissa Wen authored
Remove redundant error message (since now it is very similar to what we do in drm_sched_init) and centralize all error handling in a unique place, as we follow the same steps in any case of failure. Signed-off-by:
Melissa Wen <mwen@igalia.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220228181647.3794298-1-mwen@igalia.com
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
-
Xin Ji authored
If "hdcp_workqueue" exist, must release "hdcp_workqueue", not "workqueue". Fixes: cd1637c7 ("drm/bridge: anx7625: add HDCP support") Signed-off-by:
-
- 28 Feb, 2022 9 commits
-
-
Hsin-Yi Wang authored
The size of read_buf is READ_BUFFER_SIZE (200), so we can't access it with read_buf + PAGE_SIZE (4096). Extend the READ_BUFFER_SIZE to 400 and set the end position to read_buf + READ_BUFFER_SIZE. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rahul T R authored
Initialize bpc while creating panel_desc structure for RK101II01D-CT Below warning is triggered since bpc is not being initialized WARNING: CPU: 2 PID: 47 at drivers/gpu/drm/panel/panel-simple.c:614 panel_simple_probe+0x1b0/0x3c8 Signed-off-by:
Rahul T R <r-ravikumar@ti.com> Reviewed-by:
-
Nishanth Menon authored
Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform. Fixes: e1923395 ("drm/bridge: Add Cadence DSI driver") Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
-
Noralf Trønnes authored
Add a driver that will work with most MIPI DBI compatible SPI panels. This avoids adding a driver for every new MIPI DBI compatible controller that is to be used by Linux. The 'compatible' Device Tree property with a '.bin' suffix will be used to load a firmware file that contains the controller configuration. Example (driver will load sainsmart18.bin): display@0 { compatible = "sainsmart18", "panel-mipi-dbi-spi"; ... }; v5: - kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam) - kconfig: Add select VIDEOMODE_HELPERS (Sam) - kconfig: Add wiki url in the description (Sam) - Split out and use of_get_drm_panel_display_mode()(Sam) - Only use the first compatible to look for a firmware file since the binding mandates 2 compatibles. - Make having a firmware file mandatory so we can print an error message if it's missing to improve the user experience. It's very unlikely that a controller doesn't need to be initialized and if it doesn't, it's possible to have a firmware file containing only a DCS NOP. v4: - Move driver to drm/tiny where the other drivers of its kind are located. The driver module will not be shared with a future DPI driver after all. v3: - Move properties to DT (Maxime) - The MIPI DPI spec has optional support for DPI where the controller is configured over DBI. Rework the command functions so they can be moved to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver v2: - Drop model property and use compatible instead (Rob) - Add wiki entry in MAINTAINERS Acked-by:Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
devm_drm_dev_alloc() can't allocate structures that embed a structure which then again embeds drm_device. Workaround this by adding a driver_private pointer to struct mipi_dbi_dev which the driver can use for its additional state. v3: - Add documentation Acked-by:
-
Noralf Trønnes authored
Add a function to get a drm_display_mode from a panel-timing device tree subnode. Suggested-by:
-
Noralf Trønnes authored
Remove trailing whitespace from a comment. Acked-by:
-
Noralf Trønnes authored
Add binding for MIPI DBI compatible SPI panels. v6: - Fix indentation (Rob) v5: - Add sainsmart18 to compatible items (Rob) - Expand write-only description (Sam) v4: - There should only be two compatible (Maxime) - s/panel-dbi-spi/panel-mipi-dbi-spi/in compatible v3: - Move properties to Device Tree (Maxime) - Use contains for compatible (Maxime) - Add backlight property to example - Flesh out description v2: - Fix path for panel-common.yaml - Use unevaluatedProperties - Drop properties which are in the allOf section - Drop model property (Rob) Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Some things changed, and add two useful links. v2: Also include a link to the QR encoding work. Plus review from Javier. v3: Fix typo Guilherme spotted. Reviewed-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224132425.3463791-1-daniel.vetter@ffwll.ch
-
- 25 Feb, 2022 1 commit
-
-
Maxime Ripard authored
The omap KMS driver will call drm_plane_create_color_properties() with a default encoding and range values of BT601 and Full Range, respectively. Since the initial value wasn't carried over in the state, the driver had to set it again in omap_plane_reset(). However, the helpers have been adjusted to set it properly at reset, so this is not needed anymore. Reviewed-by:
Tomi Valkeinen <tomba@kernel.org> Signed-off-by:
-
