- 26 Mar, 2015 40 commits
-
-
Steven Rostedt (Red Hat) authored
commit 4d4eb4d4 upstream. In seq_buf_bprintf(), bstr_printf() is used to copy the format into the buffer remaining in the seq_buf structure. The return of bstr_printf() is the amount of characters written to the buffer excluding the '\0', unless the line was truncated! If the line copied does not fit, it is truncated, and a '\0' is added to the end of the buffer. But in this case, '\0' is included in the length of the line written. To know if the buffer had overflowed, the return length will be the same or greater than the length of the buffer passed in. The check in seq_buf_bprintf() only checked if the length returned from bstr_printf() would fit in the buffer, as the seq_buf_bprintf() is only to be an all or nothing command. It either writes all the string into the seq_buf, or none of it. If the string is truncated, the pointers inside the seq_buf must be reset to what they were when the function was called. This is not the case. On overflow, it copies only part of the string. The fix is to change the overflow check to see if the length returned from bstr_printf() is less than the length remaining in the seq_buf buffer, and not if it is less than or equal to as it currently does. Then seq_buf_bprintf() will know if the write from bstr_printf() was truncated or not. Link: http://lkml.kernel.org/r/1425500481.2712.27.camel@perches.comReported-by:
Joe Perches <joe@perches.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Red Hat) authored
commit 4a8fe4e1 upstream. In seq_buf_vprintf(), vsnprintf() is used to copy the format into the buffer remaining in the seq_buf structure. The return of vsnprintf() is the amount of characters written to the buffer excluding the '\0', unless the line was truncated! If the line copied does not fit, it is truncated, and a '\0' is added to the end of the buffer. But in this case, '\0' is included in the length of the line written. To know if the buffer had overflowed, the return length will be the same as the length of the buffer passed in. The check in seq_buf_vprintf() only checked if the length returned from vsnprintf() would fit in the buffer, as the seq_buf_vprintf() is only to be an all or nothing command. It either writes all the string into the seq_buf, or none of it. If the string is truncated, the pointers inside the seq_buf must be reset to what they were when the function was called. This is not the case. On overflow, it copies only part of the string. The fix is to change the overflow check to see if the length returned from vsnprintf() is less than the length remaining in the seq_buf buffer, and not if it is less than or equal to as it currently does. Then seq_buf_vprintf() will know if the write from vsnpritnf() was truncated or not. Signed-off-by:
-
Tejun Heo authored
commit 8603e1b3 upstream. cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Rabin Vincent <rabin.vincent@axis.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Tested-by:
Jesper Nilsson <jesper.nilsson@axis.com> Tested-by:
-
Ahmed S. Darwish authored
commit 2fec5104 upstream. The Kvaser firmware can only read and write messages that are not crossing the USB endpoint's wMaxPacketSize boundary. While receiving commands from the CAN device, if the next command in the same URB buffer crossed that max packet size boundary, the firmware puts a zero-length placeholder command in its place then moves the real command to the next boundary mark. The driver did not recognize such behavior, leading to missing a good number of rx events during a heavy rx load session. Moreover, a tx URB context only gets freed upon receiving its respective tx ACK event. Over time, the free tx URB contexts pool gets depleted due to the missing ACK events. Consequently, the netif transmission queue gets __permanently__ stopped; no frames could be sent again except after restarting the CAN newtwork interface. Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
commit 96943901 upstream. When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient this can lead to a skb_under_panic due to missing skb initialisations. Add the missing initialisations at the CAN skbuff creation times on driver level (rx path) and in the network layer (tx path). Reported-by:
Austin Schuh <austin@peloton-tech.com> Reported-by:
Daniel Steer <daniel.steer@mclaren.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 524a3868 upstream. Some archs (specifically PowerPC), are sensitive with the ordering of the enabling of the calls to function tracing and setting of the function to use to be traced. That is, update_ftrace_function() sets what function the ftrace_caller trampoline should call. Some archs require this to be set before calling ftrace_run_update_code(). Another bug was discovered, that ftrace_startup_sysctl() called ftrace_run_update_code() directly. If the function the ftrace_caller trampoline changes, then it will not be updated. Instead a call to ftrace_startup_enable() should be called because it tests to see if the callback changed since the code was disabled, and will tell the arch to update appropriately. Most archs do not need this notification, but PowerPC does. The problem could be seen by the following commands: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # cat /sys/kernel/debug/tracing/trace The trace will show that function tracing was not active. Signed-off-by:
-
Pratyush Anand authored
commit 1619dc3f upstream. When ftrace is enabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when ftrace is disabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_STOP_FUNC_RET command to ftrace_run_update_code(). Consider the following situation. # echo 0 > /proc/sys/kernel/ftrace_enabled After this ftrace_enabled = 0. # echo function_graph > /sys/kernel/debug/tracing/current_tracer Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never called. # echo 1 > /proc/sys/kernel/ftrace_enabled Now ftrace_enabled will be set to true, but still ftrace_enable_ftrace_graph_caller() will not be called, which is not desired. Further if we execute the following after this: # echo nop > /sys/kernel/debug/tracing/current_tracer Now since ftrace_enabled is set it will call ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on the ARM platform. On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called, it checks whether the old instruction is a nop or not. If it's not a nop, then it returns an error. If it is a nop then it replaces instruction at that address with a branch to ftrace_graph_caller. ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore, if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller() or ftrace_disable_ftrace_graph_caller() consecutively two times in a row, then it will return an error, which will cause the generic ftrace code to raise a warning. Note, x86 does not have an issue with this because the architecture specific code for ftrace_enable_ftrace_graph_caller() and ftrace_disable_ftrace_graph_caller() does not check the previous state, and calling either of these functions twice in a row has no ill effect. Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.comSigned-off-by:
Pratyush Anand <panand@redhat.com> [ removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0 if CONFIG_FUNCTION_GRAPH_TRACER is not set. ] Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit b24d443b upstream. When /proc/sys/kernel/ftrace_enabled is set to zero, all function tracing is disabled. But the records that represent the functions still hold information about the ftrace_ops that are hooked to them. ftrace_ops may request "REGS" (have a full set of pt_regs passed to the callback), or "TRAMP" (the ops has its own trampoline to use). When the record is updated to represent the state of the ops hooked to it, it sets "REGS_EN" and/or "TRAMP_EN" to state that the callback points to the correct trampoline (REGS has its own trampoline). When ftrace_enabled is set to zero, all ftrace locations are a nop, so they do not point to any trampoline. But the _EN flags are still set. This can cause the accounting to go wrong when ftrace_enabled is cleared and an ops that has a trampoline is registered or unregistered. For example, the following will cause ftrace to crash: # echo function_graph > /sys/kernel/debug/tracing/current_tracer # echo 0 > /proc/sys/kernel/ftrace_enabled # echo nop > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # echo function_graph > /sys/kernel/debug/tracing/current_tracer As function_graph uses a trampoline, when ftrace_enabled is set to zero the updates to the record are not done. When enabling function_graph again, the record will still have the TRAMP_EN flag set, and it will look for an op that has a trampoline other than the function_graph ops, and fail to find one. Reported-by:
-
Russell King authored
commit f2e0ea86 upstream. I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Michael S. Tsirkin authored
commit eeb8a7e8 upstream. when multiport is off, virtio console invokes config access from irq context, config access is blocking on s390. Fix this up by scheduling work from config irq - similar to what we do for multiport configs. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Michael S. Tsirkin authored
commit 4f6e24ed upstream. when multiport is off, we don't initialize config work, but we then cancel uninitialized control_work on freeze. Signed-off-by:
-
Peter Hurley authored
commit 30a22c21 upstream. commit 6ae9200f ("enlarge console.name") increased the storage for the console name to 16 bytes, but not the corresponding struct console_cmdline::name storage. Console names longer than 8 bytes cause read beyond end-of-string and failure to match console; I'm not sure if there are other unexpected consequences. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peter Hurley authored
commit 7fd6f640 upstream. Trying to write console output from within the serial console driver while the port->lock is held causes recursive deadlock: CPU 0 spin_lock_irqsave(&port->lock) printk() console_unlock() call_console_drivers() serial8250_console_write() spin_lock_irqsave(&port->lock) ** DEADLOCK ** The 8250_dw i/o accessors try to write a console error message if the LCR workaround was unsuccessful. When the port->lock is already held (eg., when called from serial8250_set_termios()), this deadlocks. Make the error message a FIXME until a general solution is devised. Cc: Tim Kryger <tim.kryger@gmail.com> Reported-by:
Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by:
-
Peter Hurley authored
commit 2bb78516 upstream. commit 3ffb1a81 ("serial: core: Add big-endian iotype") re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can assign the port iotype (which is expected to match the selected i/o accessors), so iotype values must not be changed. Cc: Kevin Cernekee <cernekee@gmail.com> Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Signed-off-by:
-
Miklos Szeredi authored
commit 0d278362 upstream. fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit aa991b3b upstream. Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by:
-
JeHyeon Yeon authored
commit d5e7cafd upstream. If the part of the compression data are corrupted, or the compression data is totally fake, the memory access over the limit is possible. This is the log from my system usning lz4 decompression. [6502]data abort, halting [6503]r0 0x00000000 r1 0x00000000 r2 0xdcea0ffc r3 0xdcea0ffc [6509]r4 0xb9ab0bfd r5 0xdcea0ffc r6 0xdcea0ff8 r7 0xdce80000 [6515]r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0xb9a98000 [6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc 0x820149bc [6528]spsr 0x400001f3 and the memory addresses of some variables at the moment are ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000 As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory over @oend. Signed-off-by:
JeHyeon Yeon <tom.yeon@windriver.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Alex Deucher authored
commit a239118a upstream. radeon_bo_create() calls radeon_ttm_placement_from_domain() before ttm_bo_init() is called. radeon_ttm_placement_from_domain() uses the ttm bo size to determine when to select top down allocation but since the ttm bo is not initialized yet the check is always false. It only took effect when buffers were validated later. It also seemed to regress suspend and resume on some systems possibly due to it not taking effect in radeon_bo_create(). radeon_bo_create() and radeon_ttm_placement_from_domain() need to be reworked substantially for this to be optimally effective. Re-enable it at that point. Noticed-by:
Oded Gabbay <oded.gabbay@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ben Goz authored
commit e405ca3a upstream. The current CP firmware can handle Usermode Queues only on MEC1. To reflect this firmware change, this commit reduces number of compute pipelines to 4 - 1, from 8 - 1 (the first pipeline is allocated for kgd). Signed-off-by:
Ben Goz <ben.goz@amd.com> Signed-off-by:
-
Maarten Lankhorst authored
commit b6610101 upstream. A normal wait adds to the front of the tail. By doing something similar to fence_default_wait the fence code can run without racing. This is a complete fix for "panic on suspend from KDE with radeon", and a partial fix for "Radeon: System pauses on TAHITI". On tahiti si_irq_set needs to be fixed too, to completely flush the writes before radeon_fence_activity is called in radeon_fence_enable_signaling. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90861Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@ubuntu.com> Reported-by:
Jon Arne Jørgensen <jonjon.arnearne@gmail.com> Reported-and-tested-by:
Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by:
-
Christian König authored
commit a17d4996 upstream. Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378Signed-off-by:
-
Alex Deucher authored
commit 77ae5f4b upstream. Need to double the viewport height. Signed-off-by:
-
Alex Deucher authored
commit 54acf107 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 0586915e upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit cffefd9b upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit 9d1393f2 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit f957063f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
commit c320bb5f upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Tommi Rantala authored
commit a28b2a47 upstream. Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Catalin Marinas authored
commit 285994a6 upstream. The ARM architecture allows the caching of intermediate page table levels and page table freeing requires a sequence like: pmd_clear() TLB invalidation pte page freeing With commit 5e5f6dc1 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic), the page table freeing batching was moved from tlb_remove_page() to tlb_remove_table(). The former takes care of TLB invalidation as this is also shared with pte clearing and page cache page freeing. The latter, however, does not invalidate the TLBs for intermediate page table levels as it probably relies on the architecture code to do it if required. When the mm->mm_users < 2, tlb_remove_table() does not do any batching and page table pages are freed before tlb_finish_mmu() which performs the actual TLB invalidation. This patch introduces __tlb_flush_pgtable() for arm64 and calls it from the {pte,pmd,pud}_free_tlb() directly without relying on deferred page table freeing. Fixes: 5e5f6dc1 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by:
Jon Masters <jcm@redhat.com> Tested-by:
Steve Capper <steve.capper@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Suzuki K. Poulose authored
commit 7132813c upstream. Current implementation doesn't zero out the pages allocated. Honor the __GFP_ZERO flag and zero out if set. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Al Viro authored
commit 4de930ef upstream. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 91edd096 ] Commit db31c55a (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b9 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3a net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7da (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Josh Hunt authored
[ Upstream commit d22e1537 ] tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Steven Barth authored
[ Upstream commit 73ba57bf ] for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by:
Steven Barth <cyrus@openwrt.org> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 8e199dfd ] Matt Grant reported frequent crashes in ipv6_select_ident when udp6_ufo_fragment is called from openvswitch on a skb that doesn't have a dst_entry set. ipv6_proxy_select_ident generates the frag_id without using the dst associated with the skb. This approach was suggested by Vladislav Yasevich. Fixes: 0508c07f ("ipv6: Select fragment id during UFO segmentation if not set.") Cc: Vladislav Yasevich <vyasevic@redhat.com> Reported-by:
Matt Grant <matt@mattgrant.net.nz> Tested-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Ondrej Zary authored
[ Upstream commit 8d006e01 ] This reverts commit 11ad714b because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Eran Ben Elisha authored
[ Upstream commit a16f3565 ] NUM_PORT_STATS was 9 instead of 10, which caused off-by-one bug when displaying the statistics starting from tx_chksum_offload in ethtool. Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 7d985ed1 ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
-
Al Viro authored
[ Upstream commit 3eeff778 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
